Deal Friends,
I got Samsung Galaxy Ace GT-5830D from Canada and It was network unlocked. The Android Version: gingerbread 2.3.4
Network Koodo.
when i take it it was working very well. only issue was network unlock. At that time it was possible to switch to recover mode and download mode but after I tried upgrading firmware the phone was not loading OS or even its not possible to ON it with recover mode.
I tried reading many article publish hear as well as android forum. I couldn't find out a solution.
My phone is not working. can go to Download mode only.
I followed the instruction give here to unlock my phone;
http://forum.xda-developers.com/showthread.php?t=1645164
un-lucky it didn't work for me. after that my phone stuck at booting.
Using odin3 multidownloader also I tried (flashed) but didn't work. But it is detecting my phone.
at the very first time when I attached to my phone to PC, Kies show the details on the picture attached.
Even I try to use adb shell to restore the file but adb shell is not detected my phone. see the attached picture
Please be kind enough to help me to recover my phone.
YOU any one can help me in fixing my phone I greatly appreciate.
contact me: k m g i 0 4 1 5 @ y a h o o . c o m (ignore spaces)
Thanks
regards
Gayan
You have used the wrong tutorial to unlock your phone. The GT-S5830i has completely different hardware specifications and partition table from the GT-S5830D, which is the same as the Original Galaxy Ace.
Unfortunately, you have already done the phone in, and the only advice would be to send it for service, and use the appropriate tutorial next time.
You wouldn't care where I sent this message from.
gayankmg said:
Deal Friends,
I got Samsung Galaxy Ace GT-5830D from Canada and It was network unlocked. The Android Version: gingerbread 2.3.4
Network Koodo.
when i take it it was working very well. only issue was network unlock. At that time it was possible to switch to recover mode and download mode but after I tried upgrading firmware the phone was not loading OS or even its not possible to ON it with recover mode.
I tried reading many article publish hear as well as android forum. I couldn't find out a solution.
My phone is not working. can go to Download mode only.
I followed the instruction give here to unlock my phone;
http://forum.xda-developers.com/showthread.php?t=1645164
un-lucky it didn't work for me. after that my phone stuck at booting.
Using odin3 multidownloader also I tried (flashed) but didn't work. But it is detecting my phone.
at the very first time when I attached to my phone to PC, Kies show the details on the picture attached.
Even I try to use adb shell to restore the file but adb shell is not detected my phone. see the attached picture
Please be kind enough to help me to recover my phone.
YOU any one can help me in fixing my phone I greatly appreciate.
contact me: k m g i 0 4 1 5 @ y a h o o . c o m (ignore spaces)
Thanks
regards
Gayan
Click to expand...
Click to collapse
did u make a backup?
i'm not sure if will work but did u try make a hard reset and wipe all?
Related
Hello my friends! how are you? i have a big problem with my vodafone smart ii and i need your help!!! My girlfriend try to restore it because of a problem and now the screen stacks at the green robot android! i havent check the boxes for the usb permissions you know if someone want to root it you have to check some boxes first as i remember!!! i try the restore console but nothing, i also have a programm from roddie thats fixes everything automaticaly but it stack in the search of the device...! i also have the usb drivers for it but there are no install files just some files and i dont know how to use them on the pc! what i can do now?
OK
Obviously you are new too. I had no idea what to do too the first time i bricked my phone like one and a half month ago...
Try searching the forum and experiment with your phone...
I don't understand completely what is your problem as I am new too but a simple solution could be this...
check if the drivers are installed correctly on your pc (if not search the forum for them, I can't recall in which post but a user uploaded them) and then try flashing the rom that roeddie gives(except of the recovery.img it's nonfunctional ) using this program Android_AIO_Flasher (search for it on the forum)
Edit: in order to flash the new img files you need to be in fastboot mode (press volume down continuously while powering on)
Go to
roeddie.blogspot.com
Ota update 3
U will find there The Solution !
Enjoy
Sent from my Vodafone Smart II using Tapatalk 2
i bricked my android and when i connect it to the laptop its shows "qhsusb_bulk" after some research on google i came to know that it is some kind of download mode for qualcomm devices like mine and i am stuck here cause i messed up my bootloader (cause i flashed different device's rom)
i tried every method available (there weren't much BTW) but no use
please can anyone help me with this i want my phone back....
bonny1256 said:
i bricked my android and when i connect it to the laptop its shows "qhsusb_bulk" after some research on google i came to know that it is some kind of download mode for qualcomm devices like mine and i am stuck here cause i messed up my bootloader (cause i flashed different device's rom)
i tried every method available (there weren't much BTW) but no use
please can anyone help me with this i want my phone back....
Click to expand...
Click to collapse
Please tell more about your device mate . And go search on your phone forum instead here, I'm sure there is a guide for hard brick device in your phone's forum.
For example, I've a LG G2, and well, when in qhsusb_bulk mode, it can't be recover, so don't worry now.
bonny1256 said:
i bricked my android and when i connect it to the laptop its shows "qhsusb_bulk" after some research on google i came to know that it is some kind of download mode for qualcomm devices like mine and i am stuck here cause i messed up my bootloader (cause i flashed different device's rom)
i tried every method available (there weren't much BTW) but no use
please can anyone help me with this i want my phone back....
Click to expand...
Click to collapse
Send your phone's model number and version so anyone help you
Br
Shahzaib Jahangir
As with most qualcomm devices, a bricked bootloader needs uart access to restore it (if a image is even available)
Guys im having the same issue but with a CATS50, what can i do, i have tried almost all
This thread for question and answer. Reserved.
Hey I need your help. I have edited /fstab.qcom file(backup fastab.qcom.bak). I can start TWRP but I don't where the "root" partition is?
/-
|- /system is patirtion
|- /data is patirtion
But where is / itself
I tried restoring boot partition from dd IMG that I had, but it didn't help. Help me please. It's urgent. My phone was only phone. This is my only phone.
Someone tell me where are / or root are stored
ro.build.id=LMY47V
ro.build.version.security_patch=2017-07-01
ro.product.name=Alcatel_4060A
def.tctfw.brandMode.name=Alcatel IDEAL
def.tctfw.build.number=M7UUAU1
ro.product.pcsuite=Alcatel IDEAL
Does this version support VoLTE Video call?
Has anyone realise sudden changes in brightness to 100% while using ?
Well I happens with my phone. Sometime at night when I set brightness to minimum and using my phone the brightness increases. To set to minimum I change the valve by sliding then back to minimum.
Are you guys are suffering from this problem or its just me.
Does this phone support usb otg?
Why my contact app is showing nickname, how can I disable this, I tried installing google contact, but no success, looks like problem of OS not contact app.
kdm6389 said:
Has anyone realise sudden changes in brightness to 100% while using ?
Well I happens with my phone. Sometime at night when I set brightness to minimum and using my phone the brightness increases. To set to minimum I change the valve by sliding then back to minimum.
Are you guys are suffering from this problem or its just me.
Click to expand...
Click to collapse
Fixed by M7UUAU1 ROM
@Chupi383 I want to draw your lillte attantion for once to post number #3, #5, #6. These are not serious issue. just i want to know if u have suffered these problem, maybe you have fix to share with us.
The root partition on Android is always in the initrd in the boot partition.
I see no option for video call of any sort on any firmware for this phone. It is designed for US use, and video call isn't a standard feature here.
No, USB OTG is not supported. The software stack for it is present, so some USB OTG detector apps will tell you it's supported, but the hardware for it is not there. I plugged in a few devices with USB OTG adapters that work on my Galaxy S7 Edge and nothing happens -- no power to the device, nothing detected on the phone. Even using a tee adapter that lets me power both the device and phone USB port, the phone doesn't enumerate or detect the device.
I have been using Google's contacts app successfully and it works well. I haven't tried assigning a "nickname" to a contact. It just shows their first and last name as I've entered them.
Brightness does randomly change to 100% on some firmware versions. Best I can tell, it only happens with USB debugging enabled, or possibly only after connecting to the phone on adb. Disable USB debugging and reboot after you're done hacking and it shouldn't do that anymore.
Alcatel 4060a I rooted device using kingoroot or king root with purify already with it, I obtained root ,used phone. I removed system apps n bloatware. Ok then I wanted to give my phone away airgo I took back root access, n went n removed all my Google account s then went into phone settings, and reset it. Well erased n Reeset. As soon as I hit the reset button. It went to black then Alcatel powered by Android screen. Now is stuck can't get it to boot to anything. My computer recognizes but when I run adb command window says no connected devices. Help me please like step by step instructions please
ashluvsgary420 said:
Alcatel 4060a I rooted device using kingoroot or king root with purify already with it, I obtained root ,used phone. I removed system apps n bloatware. Ok then I wanted to give my phone away airgo I took back root access, n went n removed all my Google account s then went into phone settings, and reset it. Well erased n Reeset. As soon as I hit the reset button. It went to black then Alcatel powered by Android screen. Now is stuck can't get it to boot to anything. My computer recognizes but when I run adb command window says no connected devices. Help me please like step by step instructions please
Click to expand...
Click to collapse
adb dont work on reseted phone, to anable you have to go setting > developer mode > USB debugging.
or wait for 30min to start phone since it take little time after reset
or you have bricked your alcatel
try using
Code:
$ [B]fastboot -i 0x1bbb devices[/B]
ashluvsgary420 said:
Alcatel 4060a I rooted device using kingoroot or king root with purify already with it, I obtained root ,used phone. I removed system apps n bloatware. Ok then I wanted to give my phone away airgo I took back root access, n went n removed all my Google account s then went into phone settings, and reset it. Well erased n Reeset. As soon as I hit the reset button. It went to black then Alcatel powered by Android screen. Now is stuck can't get it to boot to anything. My computer recognizes but when I run adb command window says no connected devices. Help me please like step by step instructions please
Click to expand...
Click to collapse
Go to through https://forum.xda-developers.com/android/general/super-guide-alcatel-one-touch-4060a-t3621525 to unbrick
SORRY WAS INACTIVE FOR SOMETIME... NOW IM BACK YOU CAN ASK AGAIN...
ALL CHIPSETS UNBRICKING METHOD HAS BEEN POSTED
Hi you may ask me anything related to android and I promise to answer within 24 hours and m reply will definitely work for you.
*****************************************************
SPECIALIST IN ROOTING, DEVELOPMENT, HACKING, SECURITY BYPASS, RECOVERY, FLASHING, CUSTOM ROM'S
*****************************************************
SEE YOU SOON
*****************************************************
•NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO YOUR DEVICE•
LG Aristo v10g Metropcs
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Mephis96 said:
How do i start configuring this phone without a google account?
A friend who was using it gave me this phone but forgot the boot password and the google account was not of him. So, now, we can´t use the phone.
Click to expand...
Click to collapse
You mean to say that the phone is in frp mode?
(Factory reset protection)
Yes
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Mephis96 said:
FRP..... thanks, id did not know what it means.
Yes, it is in FRP
Click to expand...
Click to collapse
Can you please tell me the phone model and it's info.
LG Aristo v10g from Metropcs
x.ak**** said:
Can you please tell me the phone model and it's info.
Click to expand...
Click to collapse
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
[PC] HOW TO CURE A BRICKED M-TEK DEVICE!!
///////////////////////////////////////////////////////////////////////////////////////////
• Download and Install the Android USB drivers for your device that I have mentioned below.
• Power Off your device and remove the battery (only if it's removable)
• Download the stock ROM or the Custom ROM on your PC that you want to flash. (GIVEN BELOW)
• Download and extract SPFT (Smart Phone Flash Tool) on your PC, you will be able to see the files shown in the picture below. (Pic 1.1)
• Open Flash tool.exe (Pic 1.2)
• Once SPFT is launched tap on Download tab. (Pic 1.3)
• In download tab click on Scatter-Loading button. (Pic 1.4)
• Now locate the Scatter File that you will find in the Stock ROM folder that you downloaded in step 3. (Pic 1.5)
• Click on Download button to start the flashing process.(Pic 1.6)
• After finishing a success message will appear. (Pic 1.7)
///////////////////////////////////////////////////////////////////////////////////////////
Downloads:-
https://androiddatahost.com/b9cyw (DRIVERS)
https://spflashtool.com/download/SP_Flash_Tool_v5.1744_Win.zip (SPFT)
https://www.needrom.com/download/lenovo-s850/ (ROM FOR LENOVO S850, REGISTRATION NEEDED ON WEBSITE TO DOWNLOAD THE ROM)
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
I was working on another project that you can see below give me 1 hour I'll get back to you ASAP.
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
How to BYPASS FRP LOCK!
Test conducted on Virtual Machine on my PC
****************************************************************
I am not responsible for any damage you may cause to your device!
****************************************************************
****************************************************************
Never wanted to upload it but did it because I aim at helping people.
****************************************************************
Google FRP (factory reset protection) is aimed at making a stolen phone less valuable.
We usually keep our phones locked with a password or pattern but once its stolen it is easy to erase the data (via Hard Reset) and reuse the phone. With Google FRP in place, whenever the phone is formatted using hardware keys it will ask for the last synced google account details before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Until now, everytime some sort of hack comes out to bypass this screen and then its patched with a security update very soon. Same is the case with LG Aristo. There is a working solution as of now but it may not last long. Let’s see how to get this working –
///////////////////////////////////////////////////////////////////////////////////////////
How to Bypass LG Aristo Google Account –
This process is lengthy, but it’s a sure shot method and works every time.
We need 2 apps to complete this bypass process. They are Shortcut Master Lite and Sidebar Lite. Download the zip file from below link.
DOWNLOAD
>Extract the zip file and transfer the apk files to a micro sd card. Install the SD card in your LG Aristo before proceeding further.
///////////////////////////////////////////////////////////////////////////////////////////
Mephis96 said:
Ita LGMS210 v10g.
What's more do you want me to send? I dont know which information do you need?
Click to expand...
Click to collapse
Done
Drop a like on all my replies so I can stay encouraged and help you further.
YeshYyyK said:
Best tool like SetCPU for controlling CPU with profiles?
SetCPU doesn't allow core control though
Click to expand...
Click to collapse
You may use Kernel Manager it's super useful and will do what you're asking for!
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
antoflos said:
Hi ! Could you help me with my problem ?? https://forum.xda-developers.com/search.php?searchid=446201503
No one seems to be able to help me... thanks a lot!!!!
Click to expand...
Click to collapse
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
It resulted that my phone was stocked on the S7 edge logo. Luckly I can go on download mode so it's not hard bricked but Odin failed on every flash I've tried. It stoped at the step "config.msi"
To flash I used this dock Rom : SM-G935F_1_20161201150115_pbdym44h2s_fac
x.ak**** said:
I will definitely help you just give me one hour but can you post the following info:
Model Number:
Exact Problem:
How that problem occured:
Click to expand...
Click to collapse
Hey man this quite difficult and i need to install this phone's firmware on my VIRTUAL Machine, basically I request you to wait for the time being so I can save your phone.
Drop a like on all my comments above to encourage me.
Huawei P10+ Firmware on Huawei P10 - by accident
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
antoflos said:
Model Number: SM-G935F / Galaxy S7 edge
Exact Problem : I can't go back to the dock ROM
How that problem occured : Last week, I wanted to try to change my phone a SM-G935F on a custom rom " Minotaurus Oreo V10". I did it successfuly but didn't like it so much so I decided to go back to stock Rom.
I used Odin and a stock ROM for that but I think I made a big mistake by not wiping with TWRP before flashing with Odin.
Click to expand...
Click to collapse
***********************************************************************************
I AM NOT RESPONSIBLE FOR ANY FURTHER DAMAGE THAT MAY BE CAUSED TO YOUR DEVICE...(UNLIKELY TO HAPPEN)
***********************************************************************************
For being able to make the downgrade operation you will have to use a Windows based computer on which you will then install Odin (an official program developed by Samsung and used on update types of operations).
***********************************************************************************
Download Odin on your computer; afterwards install the program by following on screen prompts.
The Samsung Galaxy S7 Edge USB drivers must be installed on your PC too – use Samsung KIES in that respect.
Download the stock / official Android OS for your S7 Edge – from SamMobile or from Samsung’s official website.
Power off your device and reboot into download mode: press and hold the Power, Volume Down and Home buttons for a few moments; then connect your phone with your computer with the help of the USB cable.
After making sure that Odin has recognized your device (the “added” message must be displayed and the ID:COM field should be turned yellow or blue) from the program select the PA option.
Load the firmware file; don’t select the Re Partition and Auto Reboot options; click on Start when done.
Wait while your SGS7 Edge is being updated; when done, remove the USB cord and reboot your phone.
For further info related to the update process reply to my thread
LIKE ALL MY COMMENTS TO ENCOURAGE ME TO HELP YOU.
xironimoh said:
Hi:
On my P10, I used Firmwarefinder for Huawei to find the firmware (Oreo with EMUI 8) and after verifying, I downloaded and upgraded the P10 to new firmware. After reboot, the dpi is seemed changed (as picture attached) and when I went to check it on about phone, it says Model is VKY (which is Huawei P10+) - picture attached.
Is there a way to rollback and install the correct firmware on this phone somehow?
Click to expand...
Click to collapse
No pictures attached!! and yes you can roll back to the stock ROM or even customize the DPI according to your phone [ROOT REQUIRED]
Let me know which one you prefer?
Also like all my comments above to encourage me to help you even faster.
Hello, I need help, I own a Samsung galaxy s8 and I tried to root it, I failed and ****ed up hard :'(
I tried to flash it following multiple tuto and it failed, I had the issue :
sw rev check fail bootloader device 3 binary 2
but now, my phone has a blue screen with :
an error has occurred while updating the device software.
Use the emergency recovery function in the smart switch PC software
The smart switch pc software doesn't recognize my phone.
Please help me i'm out of option :'(
Hi , try to put your phone into Download mode , and use latest Odin version in order to re-flash the latest stock version of OS if you are note sure which one is , just send me 7 and 8 number from imei ...
Thank you for your answer, I managed to fix my phone by flashing the latest firmware. I was downloading it from a website and it turns out it wasn't the last one.
After I looked on different site, I went on sammobile and I downloaded the latest version, It took me one entire day, the download speed was slow AF and my internet connection crashed in the middle of it.
I had to ask a friend to download it at his place and then, bring it to me.
I'm really happy, I managed to fix it.