Related
i just bought a chinese htm xs5292 runnin 4.1.1 i want to root and upgrade to 4.3 any help on how to do this would be greatly appreciated, here are the specs
manufacturer - htm
model - x5292
android version - 4.1.1
kernel - x5292 dual core
software - mt5617-c913-en-vo5
hardware - c913-v1.02
i'm a first timer at this so please speak like you would to a child (even though i'm 35)
many thanks in advance
paul
paul0909 said:
i just bought a chinese htm xs5292 runnin 4.1.1 i want to root and upgrade to 4.3 any help on how to do this would be greatly appreciated, here are the specs
manufacturer - htm
model - x5292
android version - 4.1.1
kernel - x5292 dual core
software - mt5617-c913-en-vo5
hardware - c913-v1.02
i'm a first timer at this so please speak like you would to a child (even though i'm 35)
many thanks in advance
paul
Click to expand...
Click to collapse
I can help you get rooted. First you will need to install drivers on your PC so your device can communicate with the root program. Then try this:
http://forum.xda-developers.com/showpost.php?p=43163569&postcount=7
If that dont work, let me know. You can always use MTK Droid Tools and SP flash tool to pull your stock recovery and port it into a custom recovery that will allow you to flash a simple root.zip
Hope this helps!
usb drivers
thanks Klown80, that looks like it should work, but first i need to install my usb drivers, i have loked at a ton of sites and they all didnt work, i need spreadtrum usb drivers, but can't figure out wich ones, a few said they all worked on any spreadtrum phone, but either im installing them incorrectly, or they simply didnt work,
again, thanks for any help in advance
paul
paul0909 said:
thanks Klown80, that looks like it should work, but first i need to install my usb drivers, i have loked at a ton of sites and they all didnt work, i need spreadtrum usb drivers, but can't figure out wich ones, a few said they all worked on any spreadtrum phone, but either im installing them incorrectly, or they simply didnt work,
again, thanks for any help in advance
paul
Click to expand...
Click to collapse
Try using this, it installs drivers for many different phones, it may not be the actual manufacturers drivers for your specific device but it will help get your phone talking to your PC:
http://www.snappea.com/
Also - Make sure you are going into settings and turning USB debugging on. You can usually find this under Settings > Developer Options.
snapea
Again, thanks Klown, but no joy, i tried serveral times and after 15 - 20 mins of "fobulating" (is that even a real word ) my phone it said "failed to processs phones data" i tried restarting both devices etc and a couple of other thing suggested but no joy.
Any other ideas, as always thanks in advance.
Paul
oh ps, i also tried to connect to snapea via wifi, but got the same message
paul0909 said:
Again, thanks Klown, but no joy, i tried serveral times and after 15 - 20 mins of "fobulating" (is that even a real word ) my phone it said "failed to processs phones data" i tried restarting both devices etc and a couple of other thing suggested but no joy.
Any other ideas, as always thanks in advance.
Paul
oh ps, i also tried to connect to snapea via wifi, but got the same message
Click to expand...
Click to collapse
Try these drivers
https://www.dropbox.com/sh/oaslz8xuxk7ag50/VRzHnZvA-b
finally
\it worked, can't thank you enough, one more bothersome question, now i have my phone rooted how do i safely, and i emphasise safely upgrade from 4.1.1 to 4.3
I have looked into it a bit myself, and am in half a mind to give it a go, but the warnings about bricking my phone always puts me off, so once again, thanks in advance for any help given, and many thanks for the help so far.
Paul
paul0909 said:
\it worked, can't thank you enough, one more bothersome question, now i have my phone rooted how do i safely, and i emphasise safely upgrade from 4.1.1 to 4.3
I have looked into it a bit myself, and am in half a mind to give it a go, but the warnings about bricking my phone always puts me off, so once again, thanks in advance for any help given, and many thanks for the help so far.
Paul
Click to expand...
Click to collapse
Go here and download MTK Droid Tools from first post:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
Run the program and connect your phone to PC, this tool will tell you lots of info about your phone but the main function is to possibly back up your stock firmware (This is good to have if you plan on trying to flash anything to the phone, this way you will have your stock files to fall back on in case something you flash to the phone does not work.) Once you have MTK Droid Tools running and phone connected, what does it say next to Hardware on the phone info tab please?
I am not sure off top of my head about updating to a higher version of Android but this back up step is REALLY important. It is hard if not impossible to find stock firmware floating around on the net for these chinese clone devices. IF you have stock files backed up you can flash almost anything you want knowing you have a way to restore your phone to working order. IF you look around here on XDA you will see tons of posts by people looking for the stock firmware for their clone phone after soft bricking it playing around. Sadly there is not much help for them unless they find someone with the EXACT same phone and are willing to share their back up (if the next person made one theirselves that is!)
hardware
Klown80 said:
Go here and download MTK Droid Tools from first post:
http://forum.xda-developers.com/showthread.php?t=2160490&styleid=18
Run the program and connect your phone to PC, this tool will tell you lots of info about your phone but the main function is to possibly back up your stock firmware (This is good to have if you plan on trying to flash anything to the phone, this way you will have your stock files to fall back on in case something you flash to the phone does not work.) Once you have MTK Droid Tools running and phone connected, what does it say next to Hardware on the phone info tab please?
I am not sure off top of my head about updating to a higher version of Android but this back up step is REALLY important. It is hard if not impossible to find stock firmware floating around on the net for these chinese clone devices. IF you have stock files backed up you can flash almost anything you want knowing you have a way to restore your phone to working order. IF you look around here on XDA you will see tons of posts by people looking for the stock firmware for their clone phone after soft bricking it playing around. Sadly there is not much help for them unless they find someone with the EXACT same phone and are willing to share their back up (if the next person made one theirselves that is!)
Click to expand...
Click to collapse
Thanks again, while i go to the link and follow the next steps i thought i'd put up the hardware version you asked for
hardware - c913-v1.02
Paul
edit
even though my pc now recognises the fact that tere is a spreadtrum phone in my devices list and i managed to root it ok, when i load up mtk droid tools it says "the device isn't revealed, connect or reconnect a cable"
needless to say i tried reconnecting and it didn't change i downloaded the adb drivers from the link under the mtk link but have no idea what to do with them,
appologies for my ignorance in all of this, but like i said in my first post, i have no idea what i'm doing with all this, thanks
paul
pps the hardware version i posted was from the info on my phone
Tried to flash the wrong rom. now tablet wont turn on. when plugged into pc it comes up as m6 chip and i have no drivers. can anyone point me in the right direction.
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
akashdubey22 said:
Hello,
I suggest you to download AMLOGIC BURNING TOOL
this will also install the required drivers for M6 Chip .... but you have to find out correct files for using with it.
.........................................................................................
.........................................................................................
I am also facing same problem of Hard Brick ST10 tab, I found the software but not able to get correct zip file to flash.
Click to expand...
Click to collapse
found this site in my searches. still haven't found anything stock or modded for mine yet. maybe you will have better luck . freaktab.(12skip[/url] a few) com/forumdisplay.php?33-NextBook-Tablets[/url] . wont let me post full link yet
HArd Bricked Nextbook nx007hd
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
I read on another webforum about how to write back a rom dump using uberizer, careful though, i remember some version being unable to restore a rom dump
sorillo555 said:
So my tablet crashed a while ago, so i tried to flash my nextbook hd7 and it seems I used the wrong firmware, right now it doesnt turn on at all, the only thing i get is, if i hold power button for about 5-10 secs, i hear the usb connect sound, but my pc is unable to see any drivers, and reads as unknown device......any help would be appreciated....at this moment.
Model Number Nx007hd
Also i ordered two of these and was able to do a rum dump on the working one, but i dont know how to flash it on the non-working one.
Any help Please
Click to expand...
Click to collapse
Revisiting this tab as my solution for having it work was to fling together parts of the nx008, not perfect, I still needed to get the original ROM.
Can you perhaps provide me with a dump of the original ROM?
Also if you need help loading the rom onto the bricked one, I believe I can be of some help.
Thanks
Hello everyone! Happy new month as we say in Greece!
I'm new to your forum (but I visit the forum way to often to find answers to some of the problems that my friends have with their android phones)
I am a iOS user since the release of the first iPhone (2G) and i still use that phone as my primary device.
Due to economical issues I never could buy a newer version of the device.
So I thought... an iPhone clone might do the trick for me!
SO I bought a used Goophone i5.
The specs that antutu gave me was that the phone had:
Quad-Core CPU (MT6589 if I'm not mistaken) --> which is a lie, because the phone in factory mode (Power + Vol down told me it was a dual core mt6577)
2GB RAM
I wanted to fresh install the ROM of the phone and I went to needrom.com to find the ROM for my phone.
I extracted the downloaded files and with SP Flashtool i followed the steps to install the ROM.
But once the green circle appeared in my PC monitor, and told me that everything was OK I ejected the phone cable and tried to power on the device.
The device doenst show ANY kind of response to anything (no dev manager port appearance or anything) and that means i cannot install another ROM or even go to recovery mode to install another rom OR even try another ROM from SP Flashtool.
I tried to locate the test point of the device but i couldn't since I've never tried that before and i am kinda scared that i will ruin my new pretty shiny iPhone clone.
Here are some images of the inside of the device (not taken by me) :
http://imagizer.imageshack.us/a/img541/2850/ebne.jpg
http://imagizer.imageshack.us/a/img132/1700/u36i.jpg
My questions are the following:
1) Can someone help me find the test point and give me step-by-step instructions on how to connect my phone again to SP Flashtool?
2) Is there a way to avoid finding the TP and just flashing a new ROM?
3) Does someone have the same problem as me out there?
4) Is there a newer ROM with ios7 looks?
Thanks to all,
hope you can all help me and then help you if needed :highfive:
The articles that I have already tried and researched are:
http://forum.xda-developers.com/showthread.php?t=2417060
http://translate.google.gr/translat...Z3x&rls=org.mozilla:en-US:official&channel=sb
http://translate.google.gr/translat...W8x&rls=org.mozilla:en-US:official&channel=sb
http://forum.china-iphone.ru/unbrick-goophone-i5-tk-6575-t29417.html
http://forum.xda-developers.com/showthread.php?t=1943442
UP please
UP . anyone?
3985993 4393
UP. Anyone?
up!
No one knows how to do this?
The things I also tried was to charge the battery from a external charger with leads and connect it to another device to see if it still works.
The battery so does work
But still cant locate the test point and cant connect the device to SP Flashtool.
Please help XDA members
Apparently sometimes it's not the best idea to use the flashing software that the manufacturer of your phone released.
I have a Wiko Lenny(technically a MediaTek MT6572) that has(or had - now it's dead) the habit of simply rebooting into a bootloop every few months. Fixing that was simple; just start SP Flash Tool, format everything then flash the stock ROM back. Last time I did that was around 4 months ago, and since then I have upgraded to Windows 10, and as such, lost the tools I had installed.
Yesterday it went into a bootloop again. I didn't remember exactly what tools I used, so I assumed they were the tools that Wiko supplied a while back with the V10 ROM. Well, they weren't. I still thought I'd give them a try. I mean, it's from the manufacturer's site, so they must work even better that the ones I was using.
I was wrong. The tool flashed the ROM "successfully", but the only thing it actually succeeded to do is corrupt the preloader. For those who don't know, corrupting the preloader basically means the phone won't even power on(not boot, actually power on), won't charge, and the PC won't detect anything if you connect the phone. Practically, it's the hardest brick a phone can get.
The fastest way to fix that is by either using a JTAG connection to flash everything manually, or by entering something called the Mediatek META mode(don't quote me on this one, though - I never heard of it before). JTAG - well I don't have the tools or expertise necessary to do that(although I'd love to learn how to do it - if anyone can point me to a well-written guide or two about that, please do!), and I simply can't get the phone to enter the META mode.
Is JTAG the only way to do it? Is META mode just a myth? Is there a way to save my phone, or should I just say "RIP" and buy a new one(I have the money for a Samsung Galaxy A3, the new one, but I was planning to buy a new computer with that money - is it worth it?)?
TL;DR (It's not that long but anyway...):
I have a Wiko Lenny(Mediatek MT6572) with a corrupted preloader after I flashed it with Wiko's tool. Can I repair it or should I just buy a new phone?
Link to the culprit that killed my phone(AKA Wiko V10 ROM): https://docs.google.com/uc?id=0BzeAvoIC2yhHMTZESUU1Y3hUM0E
Come on people, let's fix this little guy.
EDIT: Please, just tell me what your ideas are... A tip, a crazy idea, some details about MTK devices that could help, anything is appreciated.
Please...
Looks like I'm getting the 10 posts just by begging people to say something... :crying:
I have an MTK phone and its always going wrong and not booting/turning on because I mess with it and break it
I'm sure I flash the backup I made in mtktools with spflash, and plug the phone in with no battery attached, I also have to use windows 7 on a dual boot as windows 10 never played ball properly. You also need the mtk VCOM driver installed, not just adb and normal drivers. If you have all these, and have tried them, then that is the end of my knowledge sadly. Only other thing is going to needrom and seeing if they have a full rom/backup with partition tables/preloader etc.
Also, had to try a few versions of sptools as certain versions didnt work, forget which one I have and which didnt work. And also had to use a samsung USB lead as the stock one didnt work, or the other way round. I just remember it was a ball-ache but did eventually work. Am not on that pc so cant be more helpful, sorry....
robneymcplum said:
I have an MTK phone and its always going wrong and not booting/turning on because I mess with it and break it
I'm sure I flash the backup I made in mtktools with spflash, and plug the phone in with no battery attached, I also have to use windows 7 on a dual boot as windows 10 never played ball properly. You also need the mtk VCOM driver installed, not just adb and normal drivers. If you have all these, and have tried them, then that is the end of my knowledge sadly. Only other thing is going to needrom and seeing if they have a full rom/backup with partition tables/preloader etc.
Also, had to try a few versions of sptools as certain versions didnt work, forget which one I have and which didnt work. And also had to use a samsung USB lead as the stock one didnt work, or the other way round. I just remember it was a ball-ache but did eventually work. Am not on that pc so cant be more helpful, sorry....
Click to expand...
Click to collapse
Thanks for replying. I'm not sure if I have the VCOM drivers, but I'll check. Luckily I also have a Win7 PC besides this one, so I'll try it there too.
You need to repair preloader. Contact me !
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
Please do a nice thing, and tell me how to repair it here. Maybe there will be people in the exact same situation...
Can't fix MIne too !
DragonSky87 said:
Please do a nice thing, and tell me how to repair it here. Maybe there will be people in the exact same situation...
Click to expand...
Click to collapse
I also got an android phone that is INTEX AQUA I5 hd , i was flashing my phone and unfortunatly my pc got off while flashing . And my preloader got currepted .
When i tries to flash my phone it connects to pc as Mediatek Viacom port , but after 3-4 sec it connects as a usb port .
I continuously gots connceted and dissconnected .
and my Sp flash tool shoes error " S_DA_SDMMC_READ_FAILED(3153) "
Can anybody help me with it ? please help me as soon as possible.
You need to flash preloader by Testpoint,after that flash rom.
Dont remember exactly the testpoint but you can try
DragonSky87 said:
Apparently sometimes it's not the best idea to use the flashing software that the manufacturer of your phone released.
I have a Wiko Lenny(technically a MediaTek MT6572) that has(or had - now it's dead) the habit of simply rebooting into a bootloop every few months. Fixing that was simple; just start SP Flash Tool, format everything then flash the stock ROM back. Last time I did that was around 4 months ago, and since then I have upgraded to Windows 10, and as such, lost the tools I had installed.
Yesterday it went into a bootloop again. I didn't remember exactly what tools I used, so I assumed they were the tools that Wiko supplied a while back with the V10 ROM. Well, they weren't. I still thought I'd give them a try. I mean, it's from the manufacturer's site, so they must work even better that the ones I was using.
I was wrong. The tool flashed the ROM "successfully", but the only thing it actually succeeded to do is corrupt the preloader. For those who don't know, corrupting the preloader basically means the phone won't even power on(not boot, actually power on), won't charge, and the PC won't detect anything if you connect the phone. Practically, it's the hardest brick a phone can get.
The fastest way to fix that is by either using a JTAG connection to flash everything manually, or by entering something called the Mediatek META mode(don't quote me on this one, though - I never heard of it before). JTAG - well I don't have the tools or expertise necessary to do that(although I'd love to learn how to do it - if anyone can point me to a well-written guide or two about that, please do!), and I simply can't get the phone to enter the META mode.
Is JTAG the only way to do it? Is META mode just a myth? Is there a way to save my phone, or should I just say "RIP" and buy a new one(I have the money for a Samsung Galaxy A3, the new one, but I was planning to buy a new computer with that money - is it worth it?)?
TL;DR (It's not that long but anyway...):
I have a Wiko Lenny(Mediatek MT6572) with a corrupted preloader after I flashed it with Wiko's tool. Can I repair it or should I just buy a new phone?
Link to the culprit that killed my phone(AKA Wiko V10 ROM): https://docs.google.com/uc?id=0BzeAvoIC2yhHMTZESUU1Y3hUM0E
Click to expand...
Click to collapse
Repair your own device
Soft Brick: Soft brick is the state of android device which occur due to some software problems like boot loops or phone freezing at some point during boot. This only occurs if some software problem occurred in the device mainly during OS upgrade or ROM flashing. If your device is in such state then you are luck there are 99% chances that you can recover your beloved device without needing any professional help or spending hundred of dollars.
Hard Brick Hard brick is the state of android device that occurs when your device won’t boot at all i.e. no boot loop,no recovery and also not charging. This occurs due to trying to flashed firmwere not made for your device or flashed incorrectly. This is more difficult to resolve and often require professional help
in MTK Android there is many Partitions in your phone. like Preloader, Recovery, Bootimg etc….. if somehow Preloader get Corrupted then you phone will not able to DETECT WITH PC !!! in other words you will have phone with BOOT DEAD.
How Preloader get corrupted ?
There could be few reasons but main reason could be that someone or you Flash your complete phone (include Preloader) with wrong files or with wrong ver. Also there could be reason someone Delete Preloader or you Deleted.
How could i know my phone have preloader dead ?
Preloader can be dead if some one Flash it wrong and after flash your mobile will not detect with pc any more. for confirm
1.sp flash tools does not detect your phone anymore and also the computer does not as there is a pop sound when usb is connected to device
2.open device manager
take battery out from phone
insert usb
insert battery
and check is computer detecting any device
If it’s not detect then you have phone which Preloader is dead AKA Boot Dead
How can i repair it ?
requirement
1.screwdriver (by which you can open the screw from handset)
2.bricked device
3.a usb cable
4.a copper wire( for sold test points)
5.a pc with sp flash tool,mtk drivers and stock firmwere for your mobile
now you have to disassemble your phone and take pcb out. check there should be some Golden points. check these points there should be written on them Rx,Tx,GND,Vcc,Vcharge etc… check there should be written “COLO” or “KOLO” or“KCOLO” you have to Sold that point with GND After Sold Attach usb now your phone will detect with USB !! and now ready to Flash.
In some phones “COLO” or “KOLO” or “KCOLO” not written for those type of phones you have to test all points one by one Short Golden point with GND and attach usb cable which point short with gnd can able to detect your phone by pc isForce Preloader Mode Test Point !! Keep in mind Don’t Short Vcc,Vcharge or any other pin which have 4.x Volts also i had tested “Colo” or “Kolo” or “KCOLO” don’t have any kind of volts.
need help
gsm-decode said:
You need to repair preloader. Contact me ![/QUOTE
i have samsung clone A9 MT6580 After reflash phon,e is dead by sptool..i thinkl preloader is damaged..i dont have back up..but ditecting VCOM BUT Always "Sft Enable Dram_Fail (4032)" in format or fullfash in all tools
Click to expand...
Click to collapse
help me i corrupted my pre loader
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
hi sir I try to flash a stock rom downloaded from internet
its a vivo v5 android mobile phone
I tried to flash but I got a few alerts
the selected model does not support model verification
and
if I tried it gives me a brom error
now my phone condition is hard bricked and responding to flash tool
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
HI sir how can I contact you
Hi I also have the same problem - when I flashed the stock rom of my LG K7 X-210 (MT6580__lge__LG-X210__m13g__5.1__ALPS.L1.MP6.V2.19_ARIMA6580.WE.L_P42) with the SP Flash tool when I was in a bootloop, I accidentally forgot to uncheck the preloader option. I flashed it to my phone and from that point onwards it didn't want to start up any more, nor would it react if I tried charging it. So conclusion: the preloader is corrupt...
However, I read online that MTK devices (mine is MT6580) have a 'meta' mode which allows your device to still connect to SP Flash tool even if it is hardbricked (in my case by pressing the volume up button, and then simultaneously plugging it in the computer). It is then recognized as MTK Com port something in device manager.
Luckily I have the same phone (but it's not mine) and I was wondering if it was possible to make a full rom dump from that device and restore it on mine? (a method that is safe for the other device as well)
i have a proble on my new phone since i flash preloader my touch is not working anymore, any solutions ?
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
I need to repair preloader of My Nokia G20.
hello this is very simple.
i solved this problem.
i wrte english very small.
flash atarken yanlış attığın preloader dosyası ile başlat.cihazı bilgisayara bağla.format bittikten hemen sonra doğru preloader dosyasını klasörün içine yapıştır.ama çok hızlı olmalısın.yani uyumsuz preloader dosyası ile cihaza yükleme yaparken tam format esnasında uyumlu olan preloader dosyasını hızlıca yapıştır.
gsm-decode said:
You need to repair preloader. Contact me !
Click to expand...
Click to collapse
Hello, is it too late to write?
I accidently erased the firmware off my Sky 5.5W and I have searched everywhere for it.
My computer recognises it but cant find the firmware .
Does anyone know where I can find it or if I can use different firmware?
Thanks
can you tell me the current condition of your device?
Like is it stuck on boot logo (boot loop)
or is it bricked?
I don't think it's bricked as the laptop still finds it.
try checking this link out
https://forum.xda-developers.com/showthread.php?t=1936747&page=2
also like my replies, its a great encouragement if you do so
Will it work with an mtk device.? I tried it but can find the proper software for it. The files the qfl asks for aren't apart of the files I have.
Well honestly I have never worked with MTK devices but I know what you should do.
Now if that's the case you may download SPFT (Smart Phone Flash Tool) and find the appropriate drivers for your MTK device and then flash the ROM you want to (I prefer the stock room).
I hope this will help you.
...I'm in similar position with a Platinum 5. Please let me know whether you found ROM for this device and if so where, and I'll let you know what I find out if you need. I think I'll try to get something from SKY themselves so wish me luck.