I am from portugal, a real noob on android devices, i have some more friends needing some help with this tablet.
System - Android 4.0.4
Model - HN9506
Manufacturer - rockchip
Device & product - rk30sdk
Brand - INSYS
Android Version - 4.0.4 (ice cream sandwich)
Api Level - 15
Build ID - IMM76D
Display (1024x720)
Processor (ARMv7)
Processor - ARMv7 Processor rev 0 (v7l)
Cores - 2
Max Frequency - 1512 Mhz
Instruction Sets - armeabi-v7a, armeabi
SIMD Instructions - NEON
Memory (888 MB)
I dont now what else can i tell about, i have superuser, i root it easy, but i want more, i read on portuguese foruns, someone tested cyanogenmod on this tablet, but dont give any intel about.
I want to give some upgrade, i have better use for this tablet.
I dont now if i am posting this correct, if not, my bad, i am very sorry, i dont now where to put about this tablet, i am a real noob.
If anyone can share with me, how to, or if its better i send this tablet against to a wall, well, i wait a bit more!!
The problem it as, sometimes it freezes a bit, but i play here GTA and its ok.
To end, is any way to my tablet conect to adhoc net works? Not the temporary fix, i have read about, but all the boot, and have to restart the fix, i want the long term fix.
Sorry about my english, some years i dont write in english.
Related
I rooted this device by finding an update.zip on a chinese forum, since april i see it is already here too
Now i want to use a DSLR with the Tablett but OTG seems not be correct implemented or 100% working with the camera.
I already posted a threat to DSLR Controller in this forum but meanwhile i would be interested if there is a way
to install a custom kernel or custom firmware like Venom (Viper) / Cynogen?
Data:
- Android Version 4.1.1 (Jelly Bean)
- API Level 16
- Build ID JRO03C
- Fingerprint GALAPAD/G1/G1:4.1.1/JRO03C/P717.6.04.07.0A:user/test-keys#
- Size 976x600
- Physical Size 6,77" (17,2 cm)
- Processor ARMv7 Processor rev 9 (v7l)
- Cores 4
- Max Frequency 1300 Mhz
- Instruction Sets armeabi-v7a, armeabi
- NEON Supported Yes
- Renderer NVIDIA Tegra 3
A Friend of mine got a Galaxy Nexus 7 and could install with no problem a windows.
Is there no way to install a custom kernel or custom rom on it, if which one could be the right one?
Any help appriciated
Primary target so far i want to make a recovery like i can do now with 4ext Recovery on my HTC Sensation with VIPERS.
If you are interested there is an English forum for the Galapad here at slatedroid.
Hopefully we get some update there.
Hi, I am considering buying the same galapad 7, for the same purpose dslr ptp.
@Ebshow: the link you mentioned does not contain any info about OTG
@cobra98: did you manage to make the OTG working?
thanks
Yes, otg works. Wireless KB and mouse also works.
If you consider to buy one, be sure to get atleast the 16Gb version. 8 fills up easy.
I can't root this device and I can't move programs to sd card. What should I do?
Was anyone ever able to get source code from the company?
Hi, anyone knows what rom to install in this device to make it run atleast android 5?
Thanks!
Hi Guys,
Just got me a used Tablet and I'm Having real difficulty Identifying the manufacturer.
Maybe someone with more know how can help me out.
Here's the info from system info droid:-
Device: rockchip HC801
Android: 4.1.1
CPU max frequency: 1608 MHZ
CPU Cores: 2 -- (Armv7 rev0 (v71)
GPU: Arm Mali-400MP
System Ram: 876MB
display: 1024x720(9.73)
Here's the info from CPU Z
CPU Architecture ARM cortex-A9
Model HC801 (rk30sdk)
Any help would be most grateful, as I'm stumped and would love to be able to Root this thing.
Cheers Guys
A bit more info using Moborobo
It says rooted but can't gain root access
Model:HC801
Firmware version:4.1.1
Status:ROOTED
Resolution:1024*768
Manufacturer:Unknown
Serial:0123456789ABCDEF
IMEI:Unknown
IMSI:Unknown
Android Version:4.1.1
Baseband version:Unknown
Kernel version:rk30sdk-eng 4.1.1 JRO03H eng.root.20121010.205526 test-keys
Still flags up as HC801 ? Can't find anything on Google
Take a look at here...
http://jullianknight.blogspot.com/2012/08/touch-global-rk30sdk-97-dual-core.html
or
http://www.shelfdroid.com/touch-glo...en-tablet-pc-16gbbluetoothdual-camera-silver/
is this your tab??
well, it seems like a Chinese tab...
and the brand is UNKNOWN so rooting this tab or searching for stock firmwares is not a good idea...you won't find any trusted sources.
So careful when you look for these stuff
I own a NAXA brand android tablet, actually is "NAXA CORE" model NID-1006.
ARM Cortex-A7 quad core @ 1.3 Ghz.
I'm trying to root it and I would like some information from somewhere here before I attempt anything. Has anyone managed to successfully root this device? And if so, what did you use and what steps did you take?
Any information would be helpful.
Some more info on the tablet from CPU-Z:
SoC:
ARM Cortex A7 @ 1.30 Ghz (4 CPUs)
Revision: r0p3
GPU: Mali-450MP
Device:
Model: NID-1006 (W109G_1504033)
Manufacturer: alps
Hardware: mt8127
System:
Android Version: 5.0
API Level: 21
Bootloader: Unknown
Build ID: NID-1006_W109G_1504033
Kernel Architecture: armv71
Kernel Version: 3.10.54 (1432093087)
I'll give this a friendly bump. Was considering getting one of these cheaper tablets, but knowing there is a root out would be nice.
Small update. I've run both versions of Kingo Root on it, the desktop one over usb, and the APK version and while they "Appear" to work, that is.... they say "Successful!" and reboot the tablet.. it never works. When it comes back up I run root checker and it says not rooted.
So does anyone else have any remote ideas what I could try with this thing?
If anyone needs me to get and run some tool to scan it or something just ask, I'll cooperate.
I'll give one more try and ask politely for any help for this.. or if anyone could at least point me in the direction of where I could try and get this thing rooted? Something else to try?
If there's no replies this time I guess I'm forced to give up on the hope of ever rooting this thing and let this thread die naturally.
Hi everyone
I have this android tv box below, and i need remove android 4.4 and put some linux version inside box, like raspbian, kaliarm or other.
Is possible ? Some can help ?
Operating System: Android 4.4.2 KitKat
CPU: Quad Core Cortex-A9
Processor Frequency: 96-1488MHz
GPU: Mali 450
Thanks
Dhy3ives said:
Hi everyone
I have this android tv box below, and i need remove android 4.4 and put some linux version inside box, like raspbian, kaliarm or other.
Is possible ? Some can help ?
Operating System: Android 4.4.2 KitKat
CPU: Quad Core Cortex-A9
Processor Frequency: 96-1488MHz
GPU: Mali 450
Thanks
Click to expand...
Click to collapse
I'm sure you're no longer searching for the answer but here it is for those that come against it.
Long Answer: It depends, if the developer supports open source on their hardware and provides everything for a complete root of the device. Then if that is the case you would need to have all the exact model numbers and hardware versions for your chips. WiFi, Bluetooth, North bridge, South Bridge, etc etc. Then you would need to compile the kernels for all of those into your operating system. After that you would need to reconfigure your bios to to boot from the medium you put the completed image on. After that you would need to carefully install the OS. My guess is it wouldn't work the first time and you would have to do some tinkering to get to work properly. After all that you no longer have support on the device. All of that would be null and void.
Short Answer: Your better off just buying a micro PC for 150 on Amazon and using that. The potential for disaster with a non IT Expert is just plan Russian roulette. At that it only may be possible your hardware vendor could not support rooting the device. Then you would need to see if others have built a root package that unlocks the boot from as well.
Well, First, the Motorola XT300 was my first android phone, and I loved use it because it was small, and have a backtrack (like a mouse for the phone).
There are the specifications (You can see it on GSM Arena)
OS: Android 2.1 (Eclair)
Chipset: Qualcomm MSM7225 Snapdragon S1
CPU: 528 MHz ARM 11
GPU: Adreno 200 (Not activated) (Need drivers)
Well, first of all, It suppousedly had an Adreno 200, but the phone not come with the installed driver and use Software acceleration which makes the phone to be slow in everything. Someone can help with It and say if it have an Adreno 200? and If the phone have it, someone can activate it or tell me how? I want to use it back but the phone is too slow including in the launcher and apps like messages or calls.
If someone activate the GPU, I don't know if someone is interested to make a recovery CWM, or a custom rom (android 2.3 , 4 or 4.4.2) for this phone. It have like 8 years more or less... But first of all I want to make the GPU works xD Thanks to everyone