[Q] Flashed rom, now can't provision - Sprint HTC EVO 4G LTE

Relevant;
S-OFF, TWRP, CM10 based ROM (RootBox)
Everything is working except for my phone. I get 1x data, but the phone number won't show up, I can't dial out without getting a "your account doesn't have this feature" recording.
The MEID comes up correct, but I can't do ##786# or any PRL updates.
I didn't see anything in the FAQ's, but I'm assuming this is because it's not based off of a stock sprint rom. How can I do the PRL/Provisioning?

Flash a sense rom and update Profile and PRL then flash back to RootBox

bigdaddy619 said:
Flash a sense rom and update Profile and PRL then flash back to RootBox
Click to expand...
Click to collapse
Roger. I'll give it a shot. Thank you.

bigdaddy619 said:
Flash a sense rom and update Profile and PRL then flash back to RootBox
Click to expand...
Click to collapse
In addition, if that doesn't work for you, try to make a phone call once you've flashed a Sense ROM. Sprint may have to re-provision your service, at which point you'd be good to go.
Sent from my EVO using xda premium

FinZ28 said:
In addition, if that doesn't work for you, try to make a phone call once you've flashed a Sense ROM. Sprint may have to re-provision your service, at which point you'd be good to go.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Yep. One thing I neglected to mention is that I updated the radio firmware after I went S-off before I loaded the new rom. I was still using Freshmod previously and everything was working great. Since Fresh isn't in development anymore I figured it was time for some upgrades.

Now I can't load a stock rom on to it. Every time I try to install a rom through twrp it reboots about 10-15 seconds into the load, when I get back into TWRP /sdcard is corrupt and has to be reformatted before it's recognized again.
Already did a factory reset/wipe in TWRP 2.6.0.0.... Is this an issue where TWRP has to be downgraded?

defekticon said:
Now I can't load a stock rom on to it. Every time I try to install a rom through twrp it reboots about 10-15 seconds into the load, when I get back into TWRP /sdcard is corrupt and has to be reformatted before it's recognized again.
Already did a factory reset/wipe in TWRP 2.6.0.0.... Is this an issue where TWRP has to be downgraded?
Click to expand...
Click to collapse
Shouldn't be. Boot to recovery and mount your internal storage to your computer. You should get the option to format it. The file system type is FAT32. Should be good to go afterwards. The issue seems to be related to swapping back and forth between Sense and AOSP, but I personally have never had the problem.
Sent from my EVO using xda premium

FinZ28 said:
Shouldn't be. Boot to recovery and mount your internal storage to your computer. You should get the option to format it. The file system type is FAT32. Should be good to go afterwards. The issue seems to be related to swapping back and forth between Sense and AOSP, but I personally have never had the problem.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I had to do an advanced wipe in TWRP and wipe everything, format the internal SD, found a small (350 meg) sense rom (UR/EVO), that loaded this time. I was able to go in and activate the phone and do an activation and PRL update.
Going to try and reload Rootbox now... Wish me luck.

defekticon said:
I had to do an advanced wipe in TWRP and wipe everything, format the internal SD, found a small (350 meg) sense rom (UR/EVO), that loaded this time. I was able to go in and activate the phone and do an activation and PRL update.
Going to try and reload Rootbox now... Wish me luck.
Click to expand...
Click to collapse
Good luck. You should be fine now
Sent from my EVO using xda premium

FinZ28 said:
Good luck. You should be fine now
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Just a follow up - it worked. I can now use my phone in Rootbox!
Thanks!

Related

Help. Applying the OTA update?

I've asked for help in the threads posted about the OTA update and I cannot get the help I need. I've seen people post similar questions that I have and they are largely ignored. I had to stay away from the forums because I was getting so damn angry.
I have root and I have S-Off. I have not flashed any ROMs on this phone. I want to apply the OTA update but I do not know how to do that.
There's mentions of flashing firmware, radios, PRIs, PRLs, ROMs, Deoxed, Oxeded, hboot, bootloader, recovery, TWRP, etc. All of that across multiple threads does not compute well in my head.
I've read a lot and I am not sure what to do. Can someone please help me out? I will be forever grateful. I could send you a case for your phone for helping me. I promise I am not being lazy. I'm just not getting it.
If you're rooted and you have S-Off, you should have TWRP. First verify that by booting into the bootloader (Power + Vol Down) and going to Recovery.
Once in TWRP, do a backup. Backup everything. This way if something goes wrong you can restore your previous ROM.
Next download this: http://d-h.st/d2a
It's the firmware zip, courtesy of Haus. Rename the file to remove all of the stuff after PJ85IMG. Then put it on the root of your SD card and boot into the bootloader. It will scan for a zip and find it, and ask you if you want to update. This step is optional; you can flash new 1.22 ROMs without the new firmware.
After flashing that through bootloader, you can choose a 1.22 ROM that looks good to you, and download it. Boot back into TWRP, do a factory reset and wipe System, and then install the ROM. If you download it to your external SD card (in other words, an SD card you put in yourself), you'll have to mount it by going to Mounts and choosing external SD. That way you'll be able to access files on it.
To install the ROM after wiping, just hit Install from the main menu of TWRP and navigate to the location of the ROM zip you downloaded. Install it and reboot, and there you have it, you're on the new firmware and using a ROM with the new fixes in it!
The firmware zip is optional, but recommended. If you aren't comfortable flashing it, don't bother.
Sent from my EVO using xda premium
SoraX64 said:
If you're rooted and you have S-Off, you should have TWRP. First verify that by booting into the bootloader (Power + Vol Down) and going to Recovery.
Once in TWRP, do a backup. Backup everything. This way if something goes wrong you can restore your previous ROM.
Next download this: http://d-h.st/d2a
It's the firmware zip, courtesy of Haus. Rename the file to remove all of the stuff after PJ85IMG. Then put it on the root of your SD card and boot into the bootloader. It will scan for a zip and find it, and ask you if you want to update. This step is optional; you can flash new 1.22 ROMs without the new firmware.
After flashing that through bootloader, you can choose a 1.22 ROM that looks good to you, and download it. Boot back into TWRP, do a factory reset and wipe System, and then install the ROM. If you download it to your external SD card (in other words, an SD card you put in yourself), you'll have to mount it by going to Mounts and choosing external SD. That way you'll be able to access files on it.
To install the ROM after wiping, just hit Install from the main menu of TWRP and navigate to the location of the ROM zip you downloaded. Install it and reboot, and there you have it, you're on the new firmware and using a ROM with the new fixes in it!
The firmware zip is optional, but recommended. If you aren't comfortable flashing it, don't bother.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thank you Sora! I am going to follow your advice this afternoon and will let you know how it goes.
http://forum.xda-developers.com/showthread.php?t=1770501
This way will not cause you to lose any data, and installs the update on top of what you already have. Still recommend a backup in TWRP first, though
Robbie_G said:
http://forum.xda-developers.com/showthread.php?t=1770501
This way will not cause you to lose any data, and installs the update on top of what you already have. Still recommend a backup in TWRP first, though
Click to expand...
Click to collapse
I would personally recommend staying away from that method. As a rooted user you should never accept an ota. Doing it that way might work this time, but in the future there's no guarantee you won't lose s-off and never be able to get it again
Sent from my EVO using Tapatalk 2
Rxpert said:
I would personally recommend staying away from that method. As a rooted user you should never accept an ota. Doing it that way might work this time, but in the future there's no guarantee you won't lose s-off and never be able to get it again
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I know "never OTA" is your and some other people's mantra, but being able to do this is one of the benefits of S-off. I agree it is possible they could turn you back to S-ON in a future OTA (maybe...), but since it works for this current update, I don't think you should be dissuaded if you don't want to completely wipe your phone.
Robbie_G said:
I know "never OTA" is your and some other people's mantra, but being able to do this is one of the benefits of S-off. I agree it is possible they could turn you back to S-ON in a future OTA (maybe...), but since it works for this current update, I don't think you should be dissuaded if you don't want to completely wipe your phone.
Click to expand...
Click to collapse
It's a bad habit to start, and all he has to do my way is flash a ROM..
Sent from my EVO using xda premium
SoraX64 said:
It's a bad habit to start, and all he has to do my way is flash a ROM..
Sent from my EVO using xda premium
Click to expand...
Click to collapse
My man.
Exactly.
Just look at all of the people who show up on here going "Oh crap I took the OTA and now I can't get S-OFF"! The fact of the matter is, people don't check here before taking the OTA. If they look here and see that thread that says to just put on teh stock recovery and you're A-OK, thats what they'll do from then on.
When it happens, I'm just going to sit back and say "toldya so"... and let everyone else deal with the support. Until then, I'm going to keep preaching that you should never take an OTA if you are rooted or EVER thinking about rooting.
Sora, I looked at your instructions. I flashed ROMs before on my EVO 4G. That process I was comfortable with. Basically, the developer did all the work for me. I wanted to keep my phone stock for a while but I do want the updates.
cubbieswin said:
Sora, I looked at your instructions. I flashed ROMs before on my EVO 4G. That process I was comfortable with. Basically, the developer did all the work for me. I wanted to keep my phone stock for a while but I do want the updates.
Click to expand...
Click to collapse
It really comes down to this, if you're still having problems:
If you have recovery, just flash a ROM with the new base. Just like you'd do on your old Evo.
Sent from my EVO using xda premium
SoraX64 said:
It really comes down to this, if you're still having problems:
If you have recovery, just flash a ROM with the new base. Just like you'd do on your old Evo.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Ok, so I will have to flash a ROM. Do you think I can flash the deodexed version of this [ROM][STOCK] --- Stock Rooted 1.22.651.3 Odexed & DeOdexed (7/14/12)--- over my stock-from-Sprint setup?
I flashed TWRP. I'm going to update the firmware next with the file you pointed me to. I'm trying to find the info on clearing Google wallet.
...then the ROM.
Clearing GW data should say something about resetting it. It'll be in the app settings.
Seems like you've got it down now, I'm glad to say. You'll be able to flash that ROM without any issues.
Sent from my EVO using xda premium
SoraX64 said:
Clearing GW data should say something about resetting it. It'll be in the app settings.
Seems like you've got it down now, I'm glad to say. You'll be able to flash that ROM without any issues.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Sora, how do you flash your ROMs? Do you use TWRP? or something like Goo Manager? I haven't used Goo Manager before, but I see it flashes ROMs.

Which super wipe do you guys prefer?

So, there is nothing magical about super wipe scripts, but this one seems to have had some serious thought put into it.
http://forum.xda-developers.com/showthread.php?t=834812
I usually wipe manually but was curious what you guys do...
Sent from my EVO using xda app-developers app
adma84 said:
So, there is nothing magical about super wipe scripts, but this one seems to have had some serious thought put into it.
http://forum.xda-developers.com/showthread.php?t=834812
I usually wipe manually but was curious what you guys do...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
There is only one superwipe for our phone. There is nothing to compare it to, and no need as it works fine. The link you posted has nothing to do with our device.
http://forum.xda-developers.com/showthread.php?p=27166189
Ta da!
I've never understood super wipes. I just do it manually.
No need for a superwipe. Just Factory Reset and wipe System and you're ready to flash. That's never once given me a problem.
I use superwipe mod all the time after a manual wipe. Reason because TWRP does not have option to wipe/format the BOOT partition.
Sent from my EVO using xda premium
theoner1 said:
I use superwipe mod all the time after a manual wipe. Reason because TWRP does not have option to wipe/format the BOOT partition.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
You shouldn't have to wipe boot.
SoraX64 said:
You shouldn't have to wipe boot.
Click to expand...
Click to collapse
Exactly I never even heard of a Superwipe until the 3d came out. Never had to flash one since I had my g1 and i'm not going g to start now
Sent from my EVO using xda premium
SoraX64 said:
You shouldn't have to wipe boot.
Click to expand...
Click to collapse
Install any aosp rom, example deck cm10 8-31-12. The Rom have force close issue with the phone process at the beginning. Now if you want to go back to latest sense Rom, without wiping boot img, you will continue to have the same phone process force close issue even if you're on sense Rom. It just happen to me a couple nights ago. So wiping boot partition is my way of completely getting rid of previous issue on the last install Rom.
Sent from my EVO using xda premium
theoner1 said:
Install any aosp rom, example deck cm10 8-31-12. The Rom have force close issue with the phone process at the beginning. Now if you want to go back to latest sense Rom, without wiping boot img, you will continue to have the same phone process force close issue even if you're on sense Rom. It just happen to me a couple nights ago. So wiping boot partition is my way of completely getting rid of previous issue on the last install Rom.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I can flash between CM and Sense all I want without the error persisting, maybe you're doing something else wrong?
SoraX64 said:
I can flash between CM and Sense all I want without the error persisting, maybe you're doing something else wrong?
Click to expand...
Click to collapse
I was doing something wrong at the time, I forgot to flash the superwipe. When I first booted into meanrom 3.6 the same phone process force close still there. After realizing I forgot to flash superwipe, went back to recovery, wipe completely manually follow by superwipe then install meanrom 3.6, which booted fine without phone process error. Every time I flash a New Rom I always wipe everything at least twice.
Sent from my EVO using xda premium
theoner1 said:
I was doing something wrong at the time, I forgot to flash the superwipe. When I first booted into meanrom 3.6 the same phone process force close still there. After realizing I forgot to flash superwipe, went back to recovery, wipe completely manually follow by superwipe then install meanrom 3.6, which booted fine without phone process error. Every time I flash a New Rom I always wipe everything at least twice.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Are you by any chance 1.15 S-ON?
Because not a week ago I left CM10 for Viper 4G because I needed the camera to work stably, and I did not receive the force close once.
SoraX64 said:
Are you by any chance 1.15 S-ON?
Because not a week ago I left CM10 for Viper 4G because I needed the camera to work stably, and I did not receive the force close once.
Click to expand...
Click to collapse
Nope orginal hboot 1.12 and s-off
Sent from my EVO using xda premium
theoner1 said:
Nope orginal hboot 1.12 and s-off
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Hmm, interesting because I have gone back and forth between CM10 and MeanRom. I have never had an issue. I love the speed and fluidity of CM10 but the Sense camera is just to good at this point.
I have then same issue...if I don't use sw I have issues bouncing between sense and cmx nands.. can't make calls on sense without it..with it I have no issues
firmbiz94 said:
I have then same issue...if I don't use sw I have issues bouncing between sense and cmx nands.. can't make calls on sense without it..with it I have no issues
Click to expand...
Click to collapse
See what I mean, I'm not the only with this issue. Superwipe work wonders for me too.
Sent from my EVO using xda premium
I think a lot of people got used to using these from the og evo. CWM was thought to have trouble wiping so most would wipe two or three times to make sure it didn't miss anything. I haven't heard of that being an issue for a long, long time though.
One thing that it may help with though is if the ROM doesn't format the system partition. I've spent hours trying to track down bugs only to realize leftover system files were wreaking havoc with the new ROM.
theoner1 said:
See what I mean, I'm not the only with this issue. Superwipe work wonders for me too.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Hmm that's interesting, i remember i flashed tranquility rom and was working great! then tested cmx and at the same time tranquility was updated and that error was still present on the new tranquility rom, but i thought it was the rom so i flashed another sense rom but, this time i used superwipe after manually wiping all and no error anymore, since then i didnt use tranquility thinking it was the new update. now i always use superwipe.
time to go back to tranquility :fingers-crossed::fingers-crossed:

[Q] Thunderbolt failing to boot after custom ROM

I recently attempted to root my HTC thunderbolt, and to do so I used the htc dev unlocker and then this "HTC Thunderbolt Tool'
rootzwiki.com/topic/27310-all-in-one-the-htc-thunderbolt-tool
After that I downloaded a rom and installed it through the 4ext recovery, it all install fine and I did do a factory/data reset but whenever I reboot after the rom install, I get the HTC white bootloader and then the screen become black with a back light to it.
I have tried a number of times to re-install the rom and have tried to use other roms but all of them seem to end the same way.
I have used:
BAMF FOREVER 1.1
BAMF MECHA ICS
AIRBORNE GOUI
Killsense 3.7.19
Lightning501
few more
My phone is a HTC Thunderbolt and when I attempted to root the phone it had a hboot version of 1.0.8 and had a stock version of ICS installed.
Sadly I have a phone without a working rom and I had forgot to make a backup so if anyone can help it would be greatly appreciated. Preferably I would like to keep the phone rooted but its not necessary.
Thank You
I'm a total xda-developor noob, so I hope I didn't mis a thread with a the solution all ready on it.
Make sure you do the factory reset, wipe dalvik and cache. Flash the ROM and reboot. Sounds like your missing a step somewhere 8)
Sent from my ADR6400L using xda app-developers app
tburns said:
Make sure you do the factory reset, wipe dalvik and cache. Flash the ROM and reboot. Sounds like your missing a step somewhere 8)
Sent from my ADR6400L using xda app-developers app
Click to expand...
Click to collapse
I have tried clearing everything but still doesn't seem to work.
One thing I forgot to mention is sometimes if I wait long enough on the blank screen It boots me back into the 4ext recovery, don't know if that makes much of a difference.
The way I have been installing the rom
Load ROM onto the SD
Do a "wipe data/factory reset"
Go into install sd and choose the Rom which is in a .zip file
I think this is how its supposed to be done, but not sure.
aplysenko said:
I have tried clearing everything but still doesn't seem to work.
One thing I forgot to mention is sometimes if I wait long enough on the blank screen It boots me back into the 4ext recovery, don't know if that makes much of a difference.
The way I have been installing the rom
Load ROM onto the SD
Do a "wipe data/factory reset"
Go into install sd and choose the Rom which is in a .zip file
I think this is how its supposed to be done, but not sure.
Click to expand...
Click to collapse
You need to wipe cache and dalvik cache too.
Sent from my Nexus 7 using Tapatalk 2
disconnecktie said:
You need to wipe cache and dalvik cache too.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I have done that.
Problem is you were coming from the ICS OTA.
The All In One Tool alone will not get you rooted after taking the OTA.
In order to fully root and s-off after having the OTA loaded, you would need to follow the steps outlined HERE
santod040 said:
Problem is you were coming from the ICS OTA.
The All In One Tool alone will not get you rooted after taking the OTA.
In order to fully root and s-off after having the OTA loaded, you would need to follow the steps outlined HERE.
Click to expand...
Click to collapse
Your link dont work for me, id assume you were pointing to this wonderful thread
Milimbar said:
Your link dont work for me, id assume you were pointing to this wonderful thread
Click to expand...
Click to collapse
Correct Thanks I fixed the link in my first post.
I am using the thread and so far its working, just one last question. Do I have to install and use 4ext, or can I just use clockwork mod?
aplysenko said:
I am using the thread and so far its working, just one last question. Do I have to install and use 4ext, or can I just use clockwork mod?
Click to expand...
Click to collapse
You can use whatever Recovery you want, Clockwork Mod is old and not really suggested to use, especially with newer roms.
I miss the RA recovery I had on my first bolt. I use the ext4 recovery now. Glad Santod was able to help you out!!
Sent from my ADR6400L using xda app-developers app

how do i uninstall the viper ROM?

ok i loaded the viper ROM on my EVO 4G and i cant get rid of it. how do i return my phone back to stock?
Did you create a backup before you flashed the ROM? You could restore to that. You also could either flash a stock ROM (search the forums) or RUU. Good luck.
The Sprint store gave me a copy of the RUU and a new ROM but i cant get the boot loader to find it. do i need to change the file names?
I am not sure, I have never RUU'ed before. Sorry.
You have to go to the bootloader on the phone and connect it to the pc then on the pc u run the ruu and it will restore u back to stock
Sent from my EVO using xda premium
how do i run it connected to the PC? The Sprint store couldnt even figure out how to restore it to stock.
Here ya go man, go here, http://forum.xda-developers.com/showthread.php?t=2045935 download the rom.zip (its the stock rooted 3.16) put it on your sd card.
go to recovery,
go to the wipe menu,
wipe data factory reset,
wipe cache ,
wipe dalvic,
wipe system,
go to install and choose the rom from the menu and flash away. when its finished just reboot your device and youll have a stock phone just like from the store,,,,,,but rooted
hope this helped
Thank you that did the trick. !! much appreciated!!
Keeps it rooted, but will it remove S-off? Not going to use it, just curious... Still learning. Thanks
Sent from my Evo 4G LTE using xda premium
tonyevo52 said:
Keeps it rooted, but will it remove S-off? Not going to use it, just curious... Still learning. Thanks
Sent from my Evo 4G LTE using xda premium
Click to expand...
Click to collapse
No, it will still be S-off.
The advice is free....the bandwidth, not so much
ok I have the ROM installed but my phone now has a habit of randomly rebooting. how do i stop this?

[Q] Need help! "Data Call Failure"

I have had my HTC EVO LTE 4g rooted for almost a year with the following method...
http://forums.androidcentral.com/ht...s/192777-evo-4g-lte-1-22-651-3-root-easy.html
Last night I asked a question in the Sprint forum why Nascar APP would not go past the "Select your favorite driver..." Page.
Have you updated the data profile and PRL? If not, please do so. May I have your zip and cross streets? I am here for you.
Thank You
*Jacquice
Sprint Social Care
After performing the request (Update PRL & Profile) I get "Data Call Failure... Error code 97" I cannot access mobile data now. Will not connect.
I recently got an Airave 2 but this problem happens both at home and parked next to a Sprint tower.
Sprint tech tells me that because it's rooted none of their network reset codes will work (Probably a big mistake asking them for help!) :crying:
I found no answer searching this forum from anyone having this problem.
I also cannot do a factory reset. When I try to select it I get the Teamwin menu.
Can someone explain to me what I did and what I need to do? (Sorry I am not a cell phone nerd... All I wanted was to be able to run Apps that require root....)
I am still at....
Hardware version 3
1.22.651.3 71 ORD
Android 4.0.3
Sense 4.0
Thank you
Micro
I'd update to a job ROM. You are a couple ota's behind.
Unlock your bootloader and flash one of the rooted Stock jelly Bean ROMs. Ive never had a problem provisioning with a rooted phone with sprint.
Sent from my EVO using xda premium
NaterTots said:
I'd update to a job ROM. You are a couple ota's behind.
Unlock your bootloader and flash one of the rooted Stock jelly Bean ROMs. Ive never had a problem provisioning with a rooted phone with sprint.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I unlocked last year with the HTCDev unlock file. That's how I was able to root...
I flashed...
openrecovery-twrp-2.3.3.0-jewel.img
CWM-SuperSU-v0.87.zip
So did I basically stay stock w/root?
What step should I do now? I need specifics please...
Micro
Micro Maniac said:
I unlocked last year with the HTCDev unlock file. That's how I was able to root...
I flashed...
openrecovery-twrp-2.3.3.0-jewel.img
CWM-SuperSU-v0.87.zip
So did I basically stay stock w/root?
What step should I do now? I need specifics please...
Micro
Click to expand...
Click to collapse
UPDATE:
Hardware version 3
1.22.651.3 71 ORD
Android 4.0.3
Sense 4.0
HBOOT 1.15000
Radio 1.05.11.0606
OpenDSP-v25.1.0.32.0405
Either relock and take all of the over the airs or s- off, flash the updated firmware, and then flash a jelly bean ROM based on the 3.16 update.
The stickies in this forum will help with specifics. If you s- off I would check in the firmware thread to see of you need to update the firmware incrementally or not.
Sent from my Galaxy Nexus using xda app-developers app
NaterTots said:
Either relock and take all of the over the airs or s- off, flash the updated firmware, and then flash a jelly bean ROM based on the 3.16 update.
The stickies in this forum will help with specifics. If you s- off I would check in the firmware thread to see of you need to update the firmware incrementally or not.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I can't take anything "Over the air..." No mobile data connection....
I have downloaded and transferred the file "(ROM) Stock w Goodies 3.44" (http://forum.xda-developers.com/showthread.php?t=1701117)
Should I install this?
Micro Maniac said:
I can't take anything "Over the air..." No mobile data connection....
I have downloaded and transferred the file "(ROM) Stock w Goodies 3.44" (http://forum.xda-developers.com/showthread.php?t=1701117)
Should I install this?
Click to expand...
Click to collapse
It says
Rom is based off the latest OTA, 3.16.651.3
Click to expand...
Click to collapse
I say its what the other poster says you need.
budeone said:
It says
I say its what the other poster says you need.
Click to expand...
Click to collapse
Nobody seems to be reading what I'm asking or just blasting out an answer with no specifics. The only "ROM" that I could find to download under the Sprint HTC EVO LTE 4g turns out to be HTC ONE and has put my phone into a boot loop.
Could someone PLEEEAAASE provide a link to a ROM that will work? Is this really to hard of a question?
Micro
Still able to boot into TWRP but that's about all. Trying to restore backup made with TWRP last year does not work...
Ok, lets try this...
Download this rom
http://forum.xda-developers.com/showthread.php?t=2124391
http://www.androidfilehost.com/?fid=9390334956548391080
Then use this file
http://www.androidfilehost.com/?fid=9390288116658474895
do a full wipe.. cashe .. wipe wipe wipe.. NOT SD card
Unable to boot (loop) using file "(ROM) Stock w Goodies 3.44" (http://forum.xda-developers.com/show....php?t=1701117)
Unable to boot after wiping phone trying to restore original backup created when I rooted using TWRP.
Every ROM I find wants to install some damn software installer...Argh!!
I don't think I'm bricked yet but it only works as a paper weight right now...:crying:
Hardware version 3
1.22.651.3 71 ORD
Android 4.0.3
Sense 4.0
HBOOT 1.15000
Radio 1.05.11.0606
OpenDSP-v25.1.0.32.0405
have you tried this file yet?
http://www.androidfilehost.com/?fid=9390288116658474895
budeone said:
Ok, lets try this...
Download this rom
http://forum.xda-developers.com/showthread.php?t=2124391
http://www.androidfilehost.com/?fid=9390334956548391080
Then use this file
http://www.androidfilehost.com/?fid=9390288116658474895
ndroid SDK
command FASTBOOT FLASH Venom.zip says "Unknown partition..."
do a full wipe.. cashe .. wipe wipe wipe.. NOT SD card
Click to expand...
Click to collapse
budeone.... Thank you...
Okay... downloaded
Venom IMG Flasher - 3.16.651.3.zip
Viper4G_3.1.4.zip
Extracted both into folders.
Ran Venom Kernal Flasher
Browsed to Boot.img and flashed.
Phone rebooted... stays on HTC "Teamwin" white screen.....
You extracted the ROM?
Sent from my EVO using xda premium
Ok, now try a wipe and install the viper rom.
I Dont think any ROM is gonna be what you need. If you have data call failure it's gonna be a provisioning issue and you will probably need to walk thru some epst codes with a sprint tech. Do not extract ROM. Get a fairly stock ROM to boot. If S-on will need to fastboot flash boot.IMG after flashing ROM. Once up and booted, try a different sprint tech. As long as you get a ROM with epst (pretty much any sense ROM), it doesn't matter if you have root, they'll be able to help. Maybe just don't mention you have root.
Sent from my EVO using xda premium
Micro Maniac
When you clicked on the exe file it automaticly loads the img file, You dont have to look for one. You need to just use the file that loads automatic.
---------- Post added at 03:29 PM ---------- Previous post was at 03:27 PM ----------
scottspa74 said:
I Dont think any ROM is gonna be what you need. If you have data call failure it's gonna be a provisioning issue and you will probably need to walk thru some epst codes with a sprint tech. Do not extract ROM. Get a fairly stock ROM to boot. If S-on will need to fastboot flash boot.IMG after flashing ROM. Once up and booted, try a different sprint tech. As long as you get a ROM with epst (pretty much any sense ROM), it doesn't matter if you have root, they'll be able to help. Maybe just don't mention you have root.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
I think we need to get him running before Sprint is going to help him. He is stuck in a boot loop.
budeone said:
Ok, lets try this...
Download this rom
http://forum.xda-developers.com/showthread.php?t=2124391
http://www.androidfilehost.com/?fid=9390334956548391080
Then use this file
http://www.androidfilehost.com/?fid=9390288116658474895
do a full wipe.. cashe .. wipe wipe wipe.. NOT SD card
Click to expand...
Click to collapse
Erased...
Cache
Dalvik-cache
System
Internal storage ... FAILED
Android Secure ... FAILED
Ran Venom flash (flash boot.img)
It reboots phone to white HTC screen with the red HTC development screen... That's all...
What happens when you go into recovery and try to flash the rom now?
budeone said:
What happens when you go into recovery and try to flash the rom now?
Click to expand...
Click to collapse
I do not get a "Drive" via USB to copy anything over to the phone so I can only run the Venom Flash via command prompt using FASTBOOT USB...

Categories

Resources