my friend came to me with a i touch m703(allwinner a13) tab.the fault is somtimes it stuck on android logo.soo then power of and restart it works well.after doing something it stuck again.so i tried flash it 7 times using live suit and pheonix cad.i have downloaded many roms.the only one flashing is firmware Allwinner A13 lenoxx tb-50 !!! it flash fine.others fail to flash using pheonux card.after flashing >> power on tab >> stuck on booting android logo.but when it connect to the pc using data cable after few seconds it is power on successly.but touch screen no working.when data cable disconnected stucks on logo again.i am fedup of this tab flashing.plz tell me what to do.
before the first time flash i wrote drown informations
model-mid
(but in back cover it says model m703)
baseband version-1.5.2
deverloper options- ASXW-022T-704L-0
android version-4.0.4
after flashing that rom i found this info by using mtkdroid tools
sun5i
nuclear_pfdq88_eng
utc dat 20120801-015944
hey gays plz help me give me a right firnware and tell me what to do
no rply????
plzzz help me guysss
Related
Please help me guys ((((
first you should know i rooted my phone and got new kernel and ROM 2 months ago : MIUI
but today i wanted to flash a new fast kernel "fusion" and get superJB rom ...
*i can't post links of the kernel and rom because this is my first post*
i flashed the kernel successfully with flash tool
then i tried to boot my phone i just got the fusion logo forever
so i had to pull the battery out many times
i said it was ok and i began to flash the new ROM maybe it would work
now the problem : my little brother hit the mobile cable while flashing the system.img ( rom image )
:'(
i tried to restart the process but the phone doesn't respond and i just have the logo of fusion
forever and the blue led always on .. when it boots (((
I Need help please what can i do ????
ANYTHING will be appreciated
up
up
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
site
zBurnXz said:
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
Click to expand...
Click to collapse
Where did you bought it?
China
your screwed the only thing you can do is download Chn_Chn Firmware from Samsungs website and flash it though odin. And that's the only fimrware that will work, unless you flash a custom bootloader through your sd card as then it will overwrite the encrypted boot.img allowing you flash any European Firmware.
Dear all
I am using Merlin Tablet PC 3G 7 inch (ICS 4.0 i think ) and i purchased it from dubai and after 3 months from date of purchase its not booting completing and getting stuck at start-up . I already did hard reset by pressing power button + Volume UP but failed and still stuck at start up
Snaps attached in zip file(Mother Board model number and snap of stuck screen at start-up)
Manufacturer : Merlin Digital
If any one knows how to install new ICS ROM 4.0 and from where i can download then please let me know
Regards
Same problem dude
mafnan said:
Dear all
I am using Merlin Tablet PC 3G 7 inch (ICS 4.0 i think ) and i purchased it from dubai and after 3 months from date of purchase its not booting completing and getting stuck at start-up . I already did hard reset by pressing power button + Volume UP but failed and still stuck at start up
Snaps attached in zip file(Mother Board model number and snap of stuck screen at start-up)
Manufacturer : Merlin Digital
If any one knows how to install new ICS ROM 4.0 and from where i can download then please let me know
Regards
Click to expand...
Click to collapse
I have the same problem, can anyone make a backup of their rom/firmware throught MdkDroidtools ?
Hi friends,
dear experts I am facing problem of boot loop
my phone is just showing brand logo and vibrating after few seconds after I installed fake device with xposed andmade changes I think in prop.build file through software mentioned above.
I have ROM back up made through ROM manaager and mtk toolkit and I restored , factory reset but all in vain and in mtk toolkit my device is not shown/reveled. I have installed drivers PDA , adb , phone official but all ended in smoke.oops
kindly tell me the sulotion of this problem. I be strong hope I will get the solution from you EXPERTS Guys!
Hi
I'm new her and sorry for my bad English
I have a wiko lenny phone a few days ago my phone stuck on wiko logo on welcome screen and blocked there even if I tried to charge it battery logo appears without percentage of charging and the screen always power on and red led not working so i flashed it by sp flash tool but didn't work although sp flash tool program said phone flashed successfully!!
I can't hard reset it because it says : CANNOT GET ENCRYPT STATE
so please anyone can help me...
thanks
any help please...
I'm still waiting...
Flash
Flash the stock rom again :3 search for it on needrom
Give a flash with latest STOCK ROM for your device, after flashing still getting boot-loop give a hard reset It should work after reset.
For Flashing U need
1-USB drivers
2-Latest Flashing Tool
3-Latest Stock ROM
STOCK ROM check HERE
2nd LINK HERE
Also please provide us Complete info of your device.
Thanks