My digitizer died..? It just stopped working altogether. It was fine this morning.
I know the atrix screen is known for it's issues...
but I recently got it checked up at the Motorola Service Center in Seoul and spent time trying to get some parts fixed up...
I tried removing the screen protector, reflashed the PDS partition using method 2, took apart the phone and reassembled it.
Am I missing anything? Any possible fixes?
It remains only to replace the digitizer
Related
Well I did it... Broke the screen a couple of weekends ago. Ordered and received a new one. (No problem and not too bad price-wise) Then I ordered the correct screwdriver. That came in yesterday and I followed a couple of tutorials online to take the thing apart. Not too bad despite the teeny-tiny parts. I got it back together and lo-it worked! Actually it took a couple of tries and I reflashed it but then it booted right up. All the apps seemed responsive and life was good once again...
Until I tried to make a call. Then the screen went dark and it appeared that the phone froze up. Called myself from the house phone and discovered that the Aria was dialing, connecting, and sending voice but that I couldn't hear anything on the Aria.
Disassembled, re-set the earpiece, reassembled, called myself again, and I could hear. The screen came on and stayed on, but the touchscreen would not function.
Disassembled, checked all the connections, and reassembled again. The phone appears to work correctly in all aspects until I try to make or receive calls. At that point the screen shuts down and the only way to disconnect a call (or get the screen back) is to pull the battery and reboot.
I tried reflashing the ROM and that didn't work. I'm afraid the transceiver is shorting the screen out somehow but have reached the limits of my expertise.
Any suggestions?
Thanks,
Jerry
I have never had to replace my digitizer so only speaking from what i have read but it sounds like the very small rubber piece that covers the proximity sensor. I have read that if missing or not placed correctly people have had the same problem as you. Just my thoughts
I've replaced my digitizer and I have had the exact same problem. E.Cardo is correct, it is the small rubber piece on the proximity sensor not positioned correctly or not present at all.
Thanks to both of you. The proximity sensor is supposed to be right behind the ATT logo, correct?
I can't wait to get home and try this. I really don't like the backup Cliq Xt... I'll post once I've messed with it.
gdgeorge said:
The proximity sensor is supposed to be right behind the ATT logo, correct?
Click to expand...
Click to collapse
It's hard to see them exactly so I took a picture to show exactly where they are:
http://imgur.com/a/36h8t#ayQhv
It's actually just above the & in the at&t logo, although if you have a replacement digitizer, it might not have the at&t logo on it. If you have trouble seeing it, try looking at it in the sunlight.
To add to what drumist said there as small black rubber piece that goes around the proximity sensor that prevents light seepage and allot of people discard it by mistake when disassembling the phone.
Sent From Deep Within The Rabbit-Hole
Why did you have to reflash? The new screen didn't worked?.
My aria's screen is broken too. I boutgh a new one but It doesn't work. Do you resolve this reflashing? (that's mean applying the new rom version from ATT)
Thanks for your response.
javierarenas said:
Why did you have to reflash? The new screen didn't worked?.
My aria's screen is broken too. I boutgh a new one but It doesn't work. Do you resolve this reflashing? (that's mean applying the new rom version from ATT)
Thanks for your response.
Click to expand...
Click to collapse
The screen or digitizer are hardware they should have nothing to do with the rom. The op only tried flashing the phone to illuminate it is a possible source of the problem. It sounds like you did not install the new screen or digitizer correctly you may need to disassemble and make sure everything is connected correctly and securely. Flashing your phone will most likely not correct your problem.
Sent From Deep Within The Rabbit-Hole
Maybe, just maybe, there are new drivers for the touchscreen included in the rom. I am using cyanogen 7.0.3 without problems, and it works nice with the old screen.
Or the new screen is defective.
I am pretty sure I installed correctly the new screen. Of course the old one is working fine right now.
I requested a new screen so I will wait...
Thanks again.
HTC legend. Screen behave very strangely.
When you turn phone on its kind a OK, but in some time strange things happen.
Some parts of screen are unresponding. Or for example if you slide at the bottom of the screen it acts as if you pull status bar down.
Some times every touch tries to pull status bar down. But then again it will be normal.
Is that a hardware or software problem.
I tried hard reset too, didnt help. So is it screen itself then?
I would change it, but still not sure about it. Why its not bad all the time?
Thanks for all the help.
Search for TouchRecalibrate in Market maybe that helps.
Sent from my Revolver powered Asus Transformer TF101 with Tapatalk
hardware i'm afraid.
had the same problem after my phone got wet along with me in bat-****-crazy storm.
you don't need to replace the lcd, just the digitizer.
i picked one up off ebay for £10.
the replacement process is kinda scary in places - mainly prising the digitizer off the lcd.
if you're still under warranty and the damage wasn't obviously caused by yourself (that includes getting water inside the casing - the water residue gives it away unfortunately) i'd flash back to stock and rma it.
Well I thought it will be digitizer too.
Already ordered one. And yes, my missus dropped it in to a toilet after just 2 months since she bought it new. Just didn't had time to get to it till now. And warranty doesn't apply for this
She should have bough same like me - Defy
Hi, I have a quick question.
My digitizer starts failing. I know in the end it should fails cause most of them need to be replaced but maybe my problem is different.
Most of digitizers are stop working at all or only some parts of it. My digitizer is working fine but ONLY after turning on screen sometimes it's working like using it with wet fingers - it's crazy pointing everything without my control. After turn off and on screen it's working fine until next turning on.
I'm wondering can it be software problem?? I had similar problem in Defy+, leds under hardware keys stop lighting and before sending it on warranty I wiped it and now all working fine.
It's no problem for me to replace digitizer or wipe system but it would be good to know that it can be software problem before buying new digitizer.
Maybe you need to apply the raindrop fix. Been discussed already.
First, thaks for understanding what I mean. (Very poor english)
Second, this is exactly what I ment. I just copied tounchpad.cfg from http://forum.xda-developers.com/showthread.php?t=1467696 and all looks fine now. No mess up on multitouch. I hope it will stop messed up touch while turning on screen, need to test it for a while cause this issue isn't appears on each turning on but ocassionaly.
Anyway thanks for fix. You saved my time (3 hours on wiping and bulding new system) and money on new digitizer.
One more thing. I'm using this phone from few months and everything was ok. The problem appears few weeks ago. So if it is bug in rom it should appears just after I bought it, not after few months. Or maybe it's not factory bug but just error in touchpad.cfg??
Sorry for post under post but I have few more informations.
After testing few days raindrop fix the problem still exist. Fix helped but not fixed problem. Still after turning on screen touch is acting crazy but after first touch it stops and before applying fix it stops only after turning off screen and turning it on.
I reflashed full sbf stock Gingerbread, full wipe including internal memory and still the same problem.
Strange thing I observed is the problem appear only when WiFi is on and it's searching or trying to connect. When WiFi is off or it's connected to router the problem never appears and when I turn on screen and after that turn on WiFi everything is ok. Only when I'm turning screen with WiFi on screen touch acting like crazy.
Is there any chance to fix it or should I buy new digitizer??
Ok, I changed digitizer on warranty and now everything is okay. Funny thing is that I have unlocked bootloader and they changed my digitizer without any problems. Less funny is that they broke both sensors changing it and I had to send My Atrix to Motorola once more after two days to change flex. But now I hope it should be working fine.
So after all it had to be popular hardware problem.
Thred can be closed.
Sent from Motorola Atrix
I initially dropped my phone in water (sink), got out immediately and dried in rice. 72 hours later I powered up and all apps work, sound, making calls etc work. The problem is only half the screen works. I've replaced with a new digitizer and LCD screen. And still only half of the screen (same half) works. Do I have any other options? PLEASE HELP Please. My phone was purchased from AT&T if that helps.
justrad1111 said:
I initially dropped my phone in water (sink), got out immediately and dried in rice. 72 hours later I powered up and all apps work, sound, making calls etc work. The problem is only half the screen works. I've replaced with a new digitizer and LCD screen. And still only half of the screen (same half) works. Do I have any other options? PLEASE HELP Please. My phone was purchased from AT&T if that helps.
Click to expand...
Click to collapse
Did u replaced the digitizer and LCD or u went to some service center?
Without knowing the problem and changing both the things blindly, surely, waste your money. If touch was not working buddy, then why u replaced LCD?
Okay, now its done, better move on.
If replacement didn't do any good, Then there might be a chance of other hardware problem... You can contact your provider's service center, they will surely look into this matter.
sumit77seo said:
Did u replaced the digitizer and LCD or u went to some service center?
Thanks, I'll call service center. The parts that I replaced were free from a friend, so no loss of money. The screen was cracked from a previous drop but still worked fine and the LCD had a couple of white spots after it fell in the sink. So I changed both for reasons other than just the digitizer not working properly.
Click to expand...
Click to collapse
justrad1111 said:
I initially dropped my phone in water (sink), got out immediately and dried in rice. 72 hours later I powered up and all apps work, sound, making calls etc work. The problem is only half the screen works. I've replaced with a new digitizer and LCD screen. And still only half of the screen (same half) works. Do I have any other options? PLEASE HELP Please. My phone was purchased from AT&T if that helps.
Click to expand...
Click to collapse
I also have been having touch-screen problems. Several parts of the screen don't respond to touch. I'd rather fix this phone than replace it.
I am running Android 2.3.6, kernel 2.6.32.9 [email protected]#2.
I see there is no screen calibration for this version.
I have purchased another digitizer screen but have not yet tried to install it. The ATT service center is not likely to help, as I have rooted the phone and enabled side-loading and mobile tethering.
Two questions:
1. Could changing to a later Android version and doing a screen calibration fix this?
2. How should I prepare for replacing the digitizer, other than a Titanium Backup?
I just got done replacing my broken screen on my LG G3. I replaced the whole front panel and just transfered the guts. Everything checked out fine after replacement until i typed my first text message. row A-L will not goto screen unless I touch nearly inbetween the middle of the row beneath it. q-p work fine as well as z-m. What really has me boggled is that the screen accepts touches there in virtually every other app/drawing. Just the keyboards aren't allowing touch in that specfic row. any suggestion?
Found a few more bad section.. Pulled the back loudspeaker back out and tried reseating the cables and still had same issue. They're sending a replacement for free.
This was my first screen replacement, but not my first time dealing with small ribbon cables. All cameras function fine, hoping it was a defect in screen and not my screen changing abilities.. Any tips for the next one would be appreciated. Would like to have a fully functioning phone again sometime. This is nearly more frustrating than the broken screen.
I am having same Issue
steber04 said:
Found a few more bad section.. Pulled the back loudspeaker back out and tried reseating the cables and still had same issue. They're sending a replacement for free.
This was my first screen replacement, but not my first time dealing with small ribbon cables. All cameras function fine, hoping it was a defect in screen and not my screen changing abilities.. Any tips for the next one would be appreciated. Would like to have a fully functioning phone again sometime. This is nearly more frustrating than the broken screen.
Click to expand...
Click to collapse
Hey just curious if your issue has been resolved.... I am having same issue, but i took mine to a computer store i have been dealing with for years. about a year ago they started doing cell phone repairs as well. I had them replace my cracked screen on my LG G3 and that same row of text if off for me and there are a few other spots i have noticed are off as well .... very frustrating... Anyway the place I took it to has replaced 3 screens hoping they were getting defective parts.... they just called to tell me I can come get it but they were unable to repair the dead spots without going further into replacing boards or something.... I dont know... It is weird though cause you can get the dead spots to work sometimes by very lightly touching or just touching it in just the right spots like a calibration if off....
thomas020476 said:
Hey just curious if your issue has been resolved.... I am having same issue, but i took mine to a computer store i have been dealing with for years. about a year ago they started doing cell phone repairs as well. I had them replace my cracked screen on my LG G3 and that same row of text if off for me and there are a few other spots i have noticed are off as well .... very frustrating... Anyway the place I took it to has replaced 3 screens hoping they were getting defective parts.... they just called to tell me I can come get it but they were unable to repair the dead spots without going further into replacing boards or something.... I dont know... It is weird though cause you can get the dead spots to work sometimes by very lightly touching or just touching it in just the right spots like a calibration if off....
Click to expand...
Click to collapse
A review on G3 LCD's on Amazon reports the same problem "I installed the screen and immediately my wife mentioned that it seemed to have "dead spots" when she was texting / playing games. I noticed it myself when I tried texting myself as a test. Several of the letters on the keyboard just wouldn't register very well. She went into the settings and ran the "motion sensor calibration" test under general settings>gestures. This has resolved the touch screen issues. "
I don't see how that would fix it but I guess it's worth a shot.