delete
Biker1bob said:
Hey people,
Rooted using this method http://forum.xda-developers.com/showthread.php?t=1501719 OR
http://www.thespicygadgematics.com/2012/05/root-unroot-samsung-galaxy-s-ii-i9100.html
Worked fine, I have superuser and I have downloaded and done other things that need rooting (unlock)
But when I reboot into recovery I am in stock recovery not CWM.. did I do something wrong?
Thanks
James
Click to expand...
Click to collapse
your link says you have two files. cwm and busybox. did you install both?
even if you have stock recovery, its not an issue as long as you're rooted. If you're going to install a custom kernel, you'll get a custom version of CWM anyways.
Hi Mates - i need help.
I just rooted my Galaxy S3 (i9300) and after it restarted, all i can see is just pure black screen.
- Prior to Rooting, here's my phone status:
Official Stock 4.1.2 Official Firmware
Never been rooted prior to this incident
What i used:
Odin 1.85
CF-Insecure-SGS3_XX_NEE_ALE8-v1.2
Can someone please help me?
Sometimes it doesn t get rooted. Check if you can boot into recovery or not by using button combo.
Post in General section.
caloyskii23 said:
Hi Mates - i need help.
I just rooted my Galaxy S3 (i9300) and after it restarted, all i can see is just pure black screen.
- Prior to Rooting, here's my phone status:
Official Stock 4.1.2 Official Firmware
Never been rooted prior to this incident
What i used:
Odin 1.85
CF-Insecure-SGS3_XX_NEE_ALE8-v1.2
Can someone please help me?
Click to expand...
Click to collapse
1st thing is this should be in QA section not development section
Right can odin still see/connect to your phone? Can u still enter recovery etc?
http://forum.xda-developers.com/showthread.php?t=1695238
Re-downloading and flash cf.root 6.4, everything will be fine.
SwiftSmoke said:
1st thing is this should be in QA section not development section
Right can odin still see/connect to your phone? Can u still enter recovery etc?
Click to expand...
Click to collapse
yes, i can detect my phone, mate. need help please..
misacek said:
http://forum.xda-developers.com/showthread.php?t=1695238
Re-downloading and flash cf.root 6.4, everything will be fine.
Click to expand...
Click to collapse
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
caloyskii23 said:
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
Click to expand...
Click to collapse
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
caloyskii23 said:
after downloading cf.root 6.4 and flashing it via odin, still shows black screen.
Question - considering that i have flashed cf.root 6.4, will the procedure below brick my phone?
- install CWM 6.0.3.1
- reboot into CWM recovery
- install custom rom
Please advise me, mates...
Click to expand...
Click to collapse
If the cf root procedure was successful I wouldn't worry about installing a diff recovery just yet, lets get the phone booting 1st. Download a custom rom and get it moved onto your external sd card, Boot into recovery(from power off, press volume up, home button and power), make sure its custom and not default. Then install the custom rom zip and reboot it should hopefully fully reboot. then look into installing a newer custom recovery.
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
when you say button combo, that's VOLUME UP+HOME+ POWER, right? if so, yes, i can go to recovery mode, hirend_6d.
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
SwiftSmoke said:
If the cf root procedure was successful I wouldn't worry about installing a diff recovery just yet, lets get the phone booting 1st. Download a custom rom and get it moved onto your external sd card, Boot into recovery(from power off, press volume up, home button and power), make sure its custom and not default. Then install the custom rom zip and reboot it should hopefully fully reboot. then look into installing a newer custom recovery.
Click to expand...
Click to collapse
in odin, it showed that the root procedure was successful. not sure if i got your correctly, mate. so you mean i can go into recovery mode and flash custom rom?
dhirend_6d said:
You cannot install CWM recovery unless you root your phone. . Did you try going to recovery using button combo?? Sometimes, if roots after you manually go into recovery.
If not done, download Galaxy S3 unified toolkit and root using that.
Click to expand...
Click to collapse
no..! you can flash CWM recovery even though the phone is not rooted! for sure! after flashing CWM recovery we can root the phone by flashing superuser.zip! i've done this many times!
caloyskii23 said:
in odin, it showed that the root procedure was successful. not sure if i got your correctly, mate. so you mean i can go into recovery mode and flash custom rom?
Click to expand...
Click to collapse
If the recovery has been updated to the custom CWM recovery then yes you could flash a rom which will come with root and super user. But it must be the custom recovery if your still on the stock recovery u couldn't flash a custom rom.
caloyskii23 said:
when you say button combo, that's VOLUME UP+HOME+ POWER, right? if so, yes, i can go to recovery mode, hirend_6d.
Click to expand...
Click to collapse
Ohk, is the recovery stock recovery or custom (CWM) recovery. Anyways, try to wipe data and cache and boot. If not successful, install a custom ROM. But make sure the recovery is CWM recovery.
dhirend_6d said:
Ohk, is the recovery stock recovery or custom (CWM) recovery. Anyways, try to wipe data and cache and boot. If not successful, install a custom ROM. But make sure the recovery is CWM recovery.
Click to expand...
Click to collapse
how would i know if it's custom recovery? any sign that will tell me that?
're super SU apk.v phone? Icon?
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
here cwm
http://forum.xda-developers.com/showthread.php?t=2002953
misacek said:
're super SU apk.v phone? Icon?
---------- Post added at 05:39 PM ---------- Previous post was at 05:37 PM ----------
here cwm
http://forum.xda-developers.com/showthread.php?t=2002953
Click to expand...
Click to collapse
Can you ecommend a custom rom that is already rooted? i already have downloaed sentinel rom 4.6. is that rooted? tried to read the thread but i didn't see anythng that says it's rooted.
http://forum.xda-developers.com/showthread.php?t=2249984
caloyskii23 said:
Can you ecommend a custom rom that is already rooted? i already have downloaed sentinel rom 4.6. is that rooted? tried to read the thread but i didn't see anythng that says it's rooted.
http://forum.xda-developers.com/showthread.php?t=2249984
Click to expand...
Click to collapse
O__O, All custom ROMs are rooted I suppose. And yes Sentinel ROM is rooted.
dhirend_6d said:
O__O, All custom ROMs are rooted I suppose. And yes Sentinel ROM is rooted.
Click to expand...
Click to collapse
yes, saw it. its a custom rom. tried wipe data / cache but didn't work. will try to install custom rom sentinel now.
was able to install the custom rom but kept on rebooting after few minutes. it already happened thrice now.
anything i am missing?
It could be the insecure kernel you used earlier is making it unstable, probably if the custom rom doesn't install a kernel. Only thing I can think of is install an official Samsung g3 rom which should repair all the partitions that might of been damaged or corrupted, use it for a while to make sure no reboots. Then go through root and install of custom rom again. In theory creating a good foundation to install a custom rom on.
Just out of curiosity did u download an official Samsung rom before starting to flash in case u need to send it away or sell it on? If not what network/country are u using? Is the phone locked to the network or unlocked?
Edit:- I never used a kernel flash to root my phone just used cf root 6.4 to get root and custom recovery cwm. I only changed my recovery this weekend to Phil touch.
Sent from my GT-I9300 using xda premium
SwiftSmoke said:
It could be the insecure kernel you used earlier is making it unstable, probably if the custom rom doesn't install a kernel. Only thing I can think of is install an official Samsung g3 rom which should repair all the partitions that might of been damaged or corrupted, use it for a while to make sure no reboots. Then go through root and install of custom rom again. In theory creating a good foundation to install a custom rom on.
Edit:- I never used a kernel flash to root my phone just used cf root 6.4 to get root and custom recovery cwm. I only changed my recovery this weekend to Phil touch.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
hi swiftsmoke!
I tried reset and wipe 4x before i installed the rom. works perfect now!
THANK YOU SO MUCH!!!!
:good::good::good::good::good::good::good::good::good::good::good::good::good::good:
Hello all,
About a week ago I ran into a problem with my phone which I thought was a software, which actually turned out to be a hardware issue with my sim card. Cutting a long story short, I flashed the official stock rom with Odin V1.85, and it passed and everything was back to default factory settings.
Having now got my issue fixed, I wanted to re-root my phone, in order to go back to the old ROM I was using [UltimaROM v12]. However after flashing various versions of CWM I cannot get my phone to root. I'm no stranger using Odin, I can usually install a new version of CWM in 30 seconds, but my phone is persistent on not rooting. I can't work out if maybe I've done something wrong, but it doesn't seem to be working.
I've tried running as Admin on W7, but it doesn't make a difference, I'd appreciate if one of you guys could help, as I used the search bar before, but it seems no-one has had this problem before.
Modem: XXEMC2
Kernel: Stock
ROM: Stock
Use TWRP or Philz recovery .
jje
I've tried those too, they don't work either.
bkss said:
I've tried those too, they don't work either.
Click to expand...
Click to collapse
Use framaroot aragorn exploit
Sent from my GT-I9300 using xda premium
What exactly is the problem? Phone not recognised? Flash failing? If so at what point? More details please
slaphead20 said:
What exactly is the problem? Phone not recognised? Flash failing? If so at what point? More details please
Click to expand...
Click to collapse
The problem is the recoveries will look as if they've installed fine through Odin getting a "passed" flag, but when I go to recovery it's still the default Android recovery. Therefore no root.
What root method are you using?
Chainfire one I believe. You basically install CWM recovery, then install SuperSU from .zip in CWM.
So you have rooted but can't install recovery?
Just flash one with mobile Odin,
Nope, no root yet, because I can't flash SuperSU.zip 'cause I'm still on the default recovery.
Just use the old cf root then update the recovery or use framaroot and flash recovery with mobile Odin
cf-root roots the phone as well as changes the stock recovery to cwm recovery! is this the exact one you flashed? http://forum.xda-developers.com/showthread.php?t=1695238
sriram231092 said:
cf-root roots the phone as well as changes the stock recovery to cwm recovery! is this the exact one you flashed? http://forum.xda-developers.com/showthread.php?t=1695238
Click to expand...
Click to collapse
I think he is using cf auto root
I tried rooting my S3 using CF-Autoroot, using Odin. After the update CWM doesn't open saying the binaries are outdated and I have to manually reroot. SuperSU doesnt wont even after updating it from play store. Root explorer does not work. I ldo not want to flash a custom rom. Can someone help me find a fix? I am not so experienced when it comes to rooting. I checked various sites and found that the even the buggy MJ9 firmware has the same issue while rooting. Has it go to do with some change in Android 4.3? I flashed back to the stock rom and removed CF-Autoroot for now.
Actually wanted to post this in the thread http://forum.xda-developers.com/showthread.php?t=1957273&page=59 . But I can't seem to post in the Development section with less than ten posts.
Falsh philz recovery & auto root via odin.
Flash the supersu 1.80 cwm file from philz recovery. It will work.
tariq2kn said:
Falsh philz recovery & auto root via odin.
Flash the supersu 1.80 cwm file from philz recovery. It will work.
Click to expand...
Click to collapse
I would like to do this too, can I just confirm I have this correct?
1) Flash Philz recovery using odin
2) Reboot phone in to recovery
3) Flash cf-auto root file from recovery
4) reboot and go in to recovery and flash supersu 1.8 zip file
So two files are flashed using recovery after flashing philz recovery with odin?
Thanks, I fixed it by downloading CF Autoroot again, and wiping my phone in recovery mode to factory defaults, and flashing using odin. It did the tick. . It was mentioned in another thread, but didn't work when I tried. I think the factory reset fixed it. Though I am not sure.
LondonS3 said:
I would like to do this too, can I just confirm I have this correct?
1) Flash Philz recovery using odin
2) Reboot phone in to recovery
3) Flash cf-auto root file from recovery
4) reboot and go in to recovery and flash supersu 1.8 zip file
So two files are flashed using recovery after flashing philz recovery with odin?
Click to expand...
Click to collapse
Flash Philz recovery via odin in download mode.
Flash Cf-Autoroot via odin in download mode.
Reboot to philz recovery & flash supersu 1.80 zip from here.
Thanks, I'll try the same...
Thanks!
I'll try the same, have the same issue like you.
//Jocke
s_ks said:
Thanks, I fixed it by downloading CF Autoroot again, and wiping my phone in recovery mode to factory defaults, and flashing using odin. It did the tick. . It was mentioned in another thread, but didn't work when I tried. I think the factory reset fixed it. Though I am not sure.
Click to expand...
Click to collapse
Did'nt work for me...
It did'nt work for me...
I had to install "PhilZ Touch CWM" and then flash SU and then after upgrade the Super SU, to get it working...
//Jocke
s_ks said:
I tried rooting my S3 using CF-Autoroot, using Odin. After the update CWM doesn't open saying the binaries are outdated and I have to manually reroot. SuperSU doesnt wont even after updating it from play store. Root explorer does not work. I ldo not want to flash a custom rom. Can someone help me find a fix? I am not so experienced when it comes to rooting. I checked various sites and found that the even the buggy MJ9 firmware has the same issue while rooting. Has it go to do with some change in Android 4.3? I flashed back to the stock rom and removed CF-Autoroot for now.
Actually wanted to post this in the thread http://forum.xda-developers.com/showthread.php?t=1957273&page=59 . But I can't seem to post in the Development section with less than ten posts.
Click to expand...
Click to collapse
jsx1 said:
Thanks!
I'll try the same, have the same issue like you.
//Jocke
Click to expand...
Click to collapse
same here CF-Root-SGS3-v6.4.tar via odin not root i9300XXUGMK6 4.3 maybe later i get it fixed and post here
i tried to flash recovery on a friend's i9300 but nothing changed - still the original recovery.
its the 1st time it happens to me.... i flashed many roms on few galaxy s devices but with this i9300 its just impossible!
even from the android terminal it wont let me,
please help!!!!
Delphinus3 said:
i tried to flash recovery on a friend's i9300 but nothing changed - still the original recovery.
its the 1st time it happens to me.... i flashed many roms on few galaxy s devices but with this i9300 its just impossible!
even from the android terminal it wont let me,
please help!!!!
Click to expand...
Click to collapse
How do you flash recovery? What instructions did you follow?
Here!
Follow this tutorial!..
TheMidgardWatcher said:
How do you flash recovery? What instructions did you follow?
Click to expand...
Click to collapse
ALL - via android consule, via odin, and i dont know about other method. with all other devices i had NO problem at all and i flashed many roms before. its the fors time something like that happened to me.
Try this with Odin: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.25.0-i9300.tar.md5 Put it at "PDA". What error gives you Odin ? Is the phone rooted ? Have you tried installing with CWM Manager from playStore ? Also, try TWRP Manager app, as I believe it does not require root to install the recovery. After TWRP is installed, download the CWM zip and flash it. Ypour friend is running stock ROM, right ?
If you're Rooted then download and install "ROM Manager" From Play Store and that'll guide you through installing the latest CWM for your device. This is the safest method i know.