Related
Hello everybody,
First I'd like to thank to community for the hard work. I v read a countless amount of pages of this forum and I can't even imagine the time people spent helping on issues or writing tutorials.
So thank you if you re up to spend few minutes on my specific case (and sorry for the bad english).
Here is my device and the different version of kernel ...
1/ Rooting my device (tutorial in french translated from xda)
http://www.cnetfrance.fr/produits/guide-rooter-son-galaxy-s2-39763841.htm
S-Root version used: http://forum.xda-developers.com/showthread.php?t=1125414
Everything went pretty well when I rooted the GS2. I got the Superuser app so i figure it's ok.
I just used a modified kernel found on xda who was corresponding the my base band version (just the PDA in Odin).
2/ Installing a new ROM (Cyanogenmod by Rom Manager)
I followed : http://www.redmondpie.com/install-cm7-on-galaxy-s2-using-rom-manager-how-to-tutorial/ and http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide (official guide) using Rom Manager premium.
When i tried to reboot in Recovery (manually or with Rom Manager), i can't find the "Install the zip" option, I have 4 available: "Update from the zip", the 2 wiping/delete options and the reboot.
So obviously if i try to wipe files, wipe the cache then to update with the zip I have the following Error:
E: failed to verify whole-file signature
Do you have any idea what went wrong in the process ?
Should i flash the phone withOdin and change my base band version to another one ?
For info, I did the Permission Fix option in Rom Manager too. Didnt help.
Thanks a lot.
U need clockworkmod instaled first..
Sent from my GT-S5570 using xda premium
sgt_ray said:
Do you have any idea what went wrong in the process ?
Click to expand...
Click to collapse
You didn't install ClockworkMod Recovery.
Thanks for theses answers but I think I installed it with Rom Manager and i flashed it to the last version.
(joined file 1 : cwm rom manager.jpg)
When i reboot in recovery mode here is the only options available (and it's the problem i pointed out) :
(joined file 2 : 20111125_13221022.jpg)
Maybe a problem with my SD card ?
sgt_ray said:
but I think I installed it with Rom Manager and i flashed it to the last version.
Click to expand...
Click to collapse
As we've already said, you haven't installed CWM Recovery. You see at the top of your second photo where it says "Android system recovery (3e)"? That's stock recovery.
you can't install CWM recovery thru ROM manager.
just flash the CF Root Kernel for KI4 thru ODIN , you will have CWM recovery.
Hmm I understand about the CWM version I'm booting with, but as you can see on the first capture, my kernel version is a modified one i got after using Odin (puting this Kernel : GT-I9100_XXKI4_insecure.tar from http://forum.xda-developers.com/showthread.php?t=1101671).
I got the root access by S2 Root.
Ok I think I installed only the Kernel and not CF Root available here : http://forum.xda-developers.com/showthread.php?t=1103399
I ll try to redo Odin and stuff and let you know if I'm still alive.
So it's not great right now. I have installed CF Root with Odin, so I had CWM on my phone (I could see the application). Then after reboot with CWM Recovery and installing Cyanogenmod, the phone doesnt want to start anymore.....
I tried to apply the insecure kernel again with Odin but still impossible to download. I'm stuck on the screen with the yellow sign and written Galaxy S2.
HALP !!
I just tried to put back the official firware version : http://forum.xda-developers.com/showthread.php?t=1075278 and put it in my phone with Odin.
Ok, I dont have the yellow sign anywore but the phone is still stuck on the boot screen (where it's written Samsung GALAXY s II)...
What should I try ?
I'm still able to boot with CWM recovery but I didn't make any backup and nothing work.
Do you think the phone is dead ?
5 posts in a row?
So, just to clarify, you've tried to install CM7, which amongst other things tells you to do a nandroid backup, and also to flash twice in succession. Did you do either of these things? The instructions are there to be followed, don't just ignore them.
Ok my bad I didn't backup anything because I had no data to backup. This was maybe a bad move...
Anyway, I tried to flash it twice yes. Right now, i'm working with a modified Kernel (with CF Root), and booting in CWM Recovery. When I want to flash again by installing from the .zip I get a Satus 7 Error.
In CWM, every advanced options are apparently available but I dont know anything about them.
And just so you know, on my SD Card i have 1 update.zip and the update-cm-7.1.0-Galaxys2.... .zip from Cyanogen.
sgt_ray said:
Ok my bad I didn't backup anything because I had no data to backup. This was maybe a bad move...
Anyway, I tried to flash it twice yes. Right now, i'm working with a modified Kernel (with CF Root), and booting in CWM Recovery. When I want to flash again by installing from the .zip I get a Satus 7 Error.
In CWM, every advanced options are apparently available but I dont know anything about them.
And just so you know, on my SD Card i have 1 update.zip and the update-cm-7.1.0-Galaxys2.... .zip from Cyanogen.
Click to expand...
Click to collapse
Flash a stock rom with Odin and then root your phone again. Start reading and follow procedures when you want to flash custom roms again .See Intratechs`s thread for a stock rom
Thanks for your reply.
I did it, it didn't work, I mean i could flash with Odin but the reboot doesn't work : the start screen appeared without the yellow sign, but it's stuck on it.
--- update
FYI, I installed Rom Manager yesterday, it way interact in a bad way with CWM Recovery.
For now i can mount USB by CWM Recovery but cannot do anything else.
If you have a method to clean completely the phone ? Maybe the bootloader is broken...
sgt_ray said:
I just tried to put back the official firware version : http://forum.xda-developers.com/showthread.php?t=1075278 and put it in my phone with Odin.
Ok, I dont have the yellow sign anywore but the phone is still stuck on the boot screen (where it's written Samsung GALAXY s II)...
What should I try ?
I'm still able to boot with CWM recovery but I didn't make any backup and nothing work.
Click to expand...
Click to collapse
Wipe data and cache after flashing..
Sent from my GT-S5570 using xda premium
I did it. 20 times .
Maybe I should re partition my SD card...
--- update ---
I re partitionned my SD Card with Odin and tried to install a new stock ROM. Everything pass with Odin but to finalize the set up (while reboot), I got some errors and still the same problem during the boot. It's stuck !
I installed a insecure Kernel so I can access CWM Recovery but still stuck and now I can't mount anything .
Sorry to post again...
Finally I ordered a USB jig in case of...
I found this solution : http://forum.xda-developers.com/showpost.php?p=16902269&postcount=8
May try it this we.
sgt_ray said:
Sorry to post again...
Finally I ordered a USB jig in case of...
I found this solution : http://forum.xda-developers.com/showpost.php?p=16902269&postcount=8
May try it this we.
Click to expand...
Click to collapse
Good luck...
Sent from my GT-S5570 using xda premium
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
muxammle said:
Hello,
This is my first time installing a custom rom and I hope i did everything right. I installed CM9 using the guide found on their wiki page and installed it successfully. But after installation i cannot get my sim card to work on the phone.
Recovery: ClockWorkMod
CM9: 9.0.0-i9300
Galaxy SIII international.
Thanks in advance
Muzammil Ahmed
Click to expand...
Click to collapse
try reinstall a stock rom, check if everythings is fine then reinstall CM9
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
muxammle said:
Thnx for the quick response
I think the problem isn't cm9, when I was trying to install the from I couldn't boot to the cwm recovery because I forgot to root my device. Then I rooted my s3 with cf something root kit and then my signals were gone. I have the international version so my phone should be factory unlocked so I thought I should install cm anyway cuz that might solve the problem. But it didn't. I really like cyanogenmod and don't want to revert back to crappy touchwizz . The problem was there before installing cm9 but after rooting my phone.
Please any help. I really need to use my phone.
Thnx
Muzammil
Click to expand...
Click to collapse
You should reinstall everything from the scratch mate, so revert your device at stock (using odin), then flash the correct [email protected] kernel and finally if everything is working flash cm9.
Edit: if your device is locked i think you can unlock it easily, search in the forum you can find out everything you need for this.
Sent from my GT-I9300 eating Jelly Bean
sorry mate ..
i am a complete noob, i dont know how to revert to stock rom, stock recovery and unroot my device
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Arsaw said:
Download original firmware for your phone from sammobiles and flash it using odin. If is good then root it again and flash cm9.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Update 2: Okay now I have Installed my stock firmware and it seems to be working now.. But should I risk installing the CM9 again ?
muxammle said:
Okay,
I have downloaded my firmware file but i noticed that i need three tar files for the flashing precess through ODIN but i downloaded only 1 file *.tar.md5
no clue now what to do
Update: I tried to extract the file using splitfus but it didnt work.
Click to expand...
Click to collapse
- launch Odin
- load that ONE FILE on PDA section
- put your phone in download mode (volume down+home+power)
- connect the phone to computer, wait for drivers to be installed and ODIN to find your phone (you will see a message in Odin)
- click start
- don't touch the phone until it's done. It will boot alone
Also, it might be a good idea to wipe data / reset to factory before and after flash.
You could find all this info with google ....
On the topic, I have a similar issue. My phone was factory unlocked , and got locked after flashing latest stock firmware. Downgrading didn't solved anything. I am searching the forums right now, but it seems like all fixes are dated.
If anyone could point me in the right direction, it will be appreciated.
Thx
Hey rsndetre,
Thnx for the post, but sorry I already did that and it worked ..
Here are the method I used to get back my device back to normal and got my sim card working and again reinstalled cm9
1- Downloaded Toolkit from http://forum.xda-developers.com/showthread.php?t=1703488
2- Flashed Stock Boot Image
3- Flashed Stock Recovery Mode
4- Downloaded stock firmware from http://fus.nanzen.se/
5- Flashed stock firmware using Odin (your method above)
6- Rooted the device again (using odin and CF-Root-SGS3-v6.4)
7- Downloaded and placed cm9 and google apps package in SDCARD
8- Installed Rom Manager from Play Store.
9- Downloaded and Installed ClockWorkMod from rom manager and booted to recovery mode using RomManager
10- Then factory resetted, formatted the cache and installed the CM9 and GAPPS V11
Then my phone was good to go.
My phone is up and running, thanks rsndetre, Arsaw and TecQuality for your replies. I appreciate your time
Thanks
Muzammil Ahmed.
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Carlover1998 said:
Hi all,
I have a i9100P (with NFC) and it is stuck at the boot screen with the yellow triangle after I installed CWM using this method here:
galaxys2root (DOT) com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/
I can still enter Download mode and even the installed CWM, but i cannot boot into android, its just stuck on the screen
I have searched on the internet for a solution, and i cannot find a solution for this
would installing a new ROM via an SD card work? What shall i do?
HELP me PLS!!
thanks in advance!!!!
Click to expand...
Click to collapse
Quote taken from site:
Galaxy S2 Reference
You will need a rooted Galaxy S2 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF Galaxy S2! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible! ALL ROMs on this site are ONLY for Verizon Galaxy S2!
First time to rooting and custom ROMs?
Please see our FAQ for your Galaxy S2 model FIRST!!!:
Click to expand...
Click to collapse
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
oddlyshapedstickman said:
Quote taken from site:
I wouldn't have tried this as your phone is i9100P, although I know the difference isn't that big.
Also, was your phone rooted? It had to have been rooted beforehand.
Click to expand...
Click to collapse
Hi, yes it was rooted prior to this, but i thought the only difference was that the P version had NFC - but now it seems I am stuck at the boot screen - any ideas? I would appreciate it a lot!
Flash your stock ROM and check it it works.
Stileth said:
Flash your stock ROM and check it it works.
Click to expand...
Click to collapse
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
"I searched all over the internet and couldnt find a solution"
Biggest load of crap Ive read on here.
Sent from my GT-I9100 using xda premium
Carlover1998 said:
Hi, thanks for the reply - i will try flashing it after i finish downloading it. I presume I will have to do the usual wipe data, clear cache etc?
Click to expand...
Click to collapse
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Stileth said:
Yes, that should help. Btw what version you are downloading? 4.0.3 or 4.0.4?
Click to expand...
Click to collapse
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Carlover1998 said:
I am downloading 4.0.3 from here: devsrom4android.blogspot (DOT)co (DOT) uk/2012/06/i9100pxxlph-o2-uk-samsung-galaxy-s2-gt.html
4.0.3 is what I previously had, and I believe that was the exact firmware I had on the phone (o2 NFC version)
Click to expand...
Click to collapse
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
ctomgee said:
That's your problem. You were on 4.0.3, which is ICS.
The instructions at galaxys2root.com/galaxy-s2-root/how-to-install-clockworkmod-recovery-on-rooted-galaxy-s2-i9100/ don't specify, but they are for Gingerbread ONLY. The recovery kernel contained within that zip package is ClockworkMod Recovery 4.0.1.4, which is for Gingerbread.
This thread (http://forum.xda-developers.com/showthread.php?t=1118693) is the updated version of that recovery kernel for ICS.
You don't have to flash the full firmware, just flash a kernel that is meant to work with ICS and you should be fine.
Click to expand...
Click to collapse
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Carlover1998 said:
Thanks for the advice - but i already have the stock ROM on an SD card so i think i will flash this. Problem is i cannot get CWM to read from the external SD card, so i cannot locate the zip and install it - help?
EDIT: if i install the kernel you gave me the link to ([KERNEL][ICS] ClockworkMod Recovery 5.5.0.4) , will it remove the root access i had?
EDIT 2: I have just flashed the kernel via odin, and it finally got past the screen with the yellow triangle! However, it is now stuck on the second screen which shows the 'S' logo with the words 'Samsung Galaxy SII' under it. Any more ideas?
Click to expand...
Click to collapse
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
ctomgee said:
Can you boot to recovery? If so, you can try a factory reset/wipe data. You'll lose all your data, (not counting pictures/media) but at this point, do you have anything to lose?
Click to expand...
Click to collapse
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Carlover1998 said:
I just tried that, i can boot into the new cwm - have nothing to lose since i've only had it for about 3 days - however even after the wipe data, cache and dalvik it is still stuck on the 'S' screen now
Click to expand...
Click to collapse
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
ctomgee said:
Well, now I'd say you need to flash a full firmware. You said you downloaded I9100PXXLPH from here? Should work. But you'll no longer be rooted, and you won't have CWM recovery.
How did you get into this in the first place? You wanted CWM recovery?
Click to expand...
Click to collapse
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
EDIT: it wont allow me to mount USB in CWM
can i just flash the ZIP using odin in download mode, or does it have to be a .tar file?
Carlover1998 said:
I will be sure to try that, and basically earlier today i rooted it successfully, and then i had to get CWM onto it so i could start flashing new ROMs etc, and i tried installing CWM via that method that has now caused all of this
Never the less i will try your suggestion, so should i basically mount usb from CWM, then copy the firmware over to the phone, unmount, and then wipe, and then flash it finally?
Click to expand...
Click to collapse
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
ctomgee said:
No. That download is for a package that must be flashed while the phone is in download mode. That will require you to use a computer, and a flashing tool, such as Odin or Heimdall.
Click to expand...
Click to collapse
How would I go about flashing it in download mode, i really have no idea as I don't think you can flash zip files in odin, forgive me for all of the questions I really appreciate your help!
EDIT: I have unzipped the file and hooray lies in it the .tar.md5 file! I am in the middle of flashing this and will report back on results
Thanks a lot guys!!
THANKS GUYS FOR ALL OF YOUR HELP, my SII is now working fully again! Cheers to all that helped, flashing the stock firmware worked with wipe/cache
Can't thank you enough!
Last thing if you don't mind, i want to root it again using this: (http://forum.xda-developers.com/showthread.php?t=1321582)
Now after that, how can i install CWM without getting into the mess i got into today? cheers!
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Stileth said:
Nope, I think that's for GB. For easy root use method 1 from 1st guide in my signature.
Click to expand...
Click to collapse
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
ctomgee said:
But it appears that this will not give you permanent CWM recovery. Which is what I think he wants.
Click to expand...
Click to collapse
Well I think Chainfire's CF-Root kernels (http://forum.xda-developers.com/showthread.php?t=1103399) are not for i9100P, so not sure if he can achieve permanent CWM recovery. Anyway if he don't plan to flash every hour new ROM he should be fine with latest temporary CWM 6: http://forum.xda-developers.com/showthread.php?t=1840223 although will ask Phil about compatibility.
Hi.
First of all, I want to thank all the users of this forum, I found many helpful things and you're amazing.
Second, my english is a little bad, so I apologize for any mistake.
Now, the problem:
I have a rooted Grand Quattro that is stuck at the logo screen (the one that shows name and model of device). I can't boot to recovery mode, only to download mode. How can I make the phone start again? I have a backup of ROM that I've made with CWM, but I can't access CWM to restore, and can't reflash CWM (device says "signature verification failed" after every attempt with Odin 3.07).
I need help, I've searched through these foruns and another places, but couldn't find a suitable answer.
Thanks for attention
Flash Fresh ROM again via odin
BTW which rooting method did you use? There are better and easy methods. Use Kingo App to root the phone.
Try flashing the stock rom again via odin while in download mode ofcourse. Because you are able to do to download mode. Right?
Then download kingo app and root your phone. Don't use cwm method unless you want to flash any other script or custom rom in your phone.
Also uninstall USB drivers and install it again.
Let me know if some new problem arises. :fingers-crossed:
Cheers :good:
Thanks for response.
I flashed the stock rom and it worked again (and I didn't lost programs and personal files )
I opened this thread because I couldn't download the stock rom from Terafile, but I managed to download and install after some time.
About your question: I rooted with Kingo app, but I was trying to install CWM, and I read in a random place that I need to chroot the install-recovery.sh. I think this messed with the phone.
Well, I recovered the device and rooted again, so thanks for helping
Sent from my GT-I8552B using xda app-developers app
my grand quatroo is stuck on samsung logo screen
How to make it on please teel me the full procedure
freitaz said:
Thanks for response.
I flashed the stock rom and it worked again (and I didn't lost programs and personal files )
I opened this thread because I couldn't download the stock rom from Terafile, but I managed to download and install after some time.
About your question: I rooted with Kingo app, but I was trying to install CWM, and I read in a random place that I need to chroot the install-recovery.sh. I think this messed with the phone.
Well, I recovered the device and rooted again, so thanks for helping
Sent from my GT-I8552B using xda app-developers app
Click to expand...
Click to collapse
mysteryno46 said:
BTW which rooting method did you use? There are better and easy methods. Use Kingo App to root the phone.
Try flashing the stock rom again via odin while in download mode ofcourse. Because you are able to do to download mode. Right?
Then download kingo app and root your phone. Don't use cwm method unless you want to flash any other script or custom rom in your phone.
Also uninstall USB drivers and install it again.
Let me know if some new problem arises. :fingers-crossed:
Cheers :good:
Click to expand...
Click to collapse
Where did you get the stock rom? And flash it with odin?
Download it on http://sammobile.com and flash it with Odin.
This is great platform to resolve all kinds of rooting issues....
Stock ROMs of almost all versions are available on xda itself and all over the internet......
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
chullan88 said:
Hi All..
Im pretty much a noob..last week i decided to install cyanogenmod on my phone.Im using international version of Galaxy Note GTN7000.
I saw there was a windows installer on cm website..but wanted to make a backup of my current rom..
i rooted my phone using kingo android root..installed rom manager..flashed latest clockworkmod recovery..
but on booting into recovery,i found stock recovery was being forced..i read somewhere it was because of unlocked bootloader..
on cyanogenmod wiki page,i found installation of clockworkmod recov using heimdall..everything went fine ...blue progress bar was shown in the download mode...and when i rebooted into recovery mode i saw the first danger sign..there was a yellow triangle beneath galaxy note logo..
and then it booted into clockworkmod recovery 5.8..Foolishly i did a system backup..rebooted...surprised to find phone went into black screen after displaying a note logo with yellow triangle beneath..tried recovery from clockworkmod without hope but that didnt work as expected...
This is the situation..All i need now is to install cyanogenmod 10.1.3 stable on my device..i dont want a custom rom backup anymore..
'but i saw in forums i will need to flash a custom rom from sammobile...
All help will be appreciated.Pleasen help..
Click to expand...
Click to collapse
At first flash a Samsung firmware through Odin: http://forum.xda-developers.com/showthread.php?t=1424997
I recommend you not using Rom Manager. Have a look at PhilZ's thread for having a safe kernel and custom recovery to be able to backup and flash what you want.
doubt
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
chullan88 said:
Can i flash stock rom from sammobile
and go for cyanogenmod windows installer without flashing philz kernel
Click to expand...
Click to collapse
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Primokorn said:
I really don't like this CM installer... Toolkits won't help you in case of trouble.
Download a firmware from SamMobile and flash it with Odin then you will be able to install PhilZ and your CM rom (or another one )
Click to expand...
Click to collapse
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
chullan88 said:
Soory for my noobness..
The Odin link here is dead...
Also i cant open sammobile firmware page..
Please could you help..
Click to expand...
Click to collapse
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Primokorn said:
No worries. It's just an advice regarding CM Installer ,)
All versions of Odin here: http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539
SamFirmware: http://www.sammobile.com/firmwares/ and enter N7000 into the search box.
If you can't access to this website click here then select your device on the left.
Click to expand...
Click to collapse
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
chullan88 said:
One more question..dont get me wrong..its just to skip customrom installation if its unneeded..
i plan to use cm 10.1.3..stable..
can i download it from cm site and flash it using clockworkmod recovery..
if thats ok could you explain the steps..
Click to expand...
Click to collapse
Yes you can but the most important thing on N7000 is to have a SAFE kernel before wiping or flashing from recovery. (more details in the N7100 sections)
Here are the general instructions to flash a new custom rom:
1. Having root and a working custom recovery (updated)
2. Boot into recovery mode (VOL DOWN + POWER + HOME) then VOL UP to accept the warning.
3. Make a Nandroid backup and backup your EFS.
4. Full wipe: wipe data (factory reset), cache, dalvik and system. Recoveries are different. You may need to go to another menu to format the system partition.
5. Flash rom
6. Flash Gapps
7. Reboot normally