[ROM][T0LTEVZW/I605]Unofficial CM10.2[JSS15J][8/8/13] - Verizon Samsung Galaxy Note II

Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Verizon Galaxy Note 2.
PreReq: Bootloader Unlocked!
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-May need to get a gps lock on stock before switching to CM in order for gps to work
-BT voice search
- Graphical glitches (i.e. black screens) - will require new Mali graphic blobs
- No screenshot or anything that relies on screenshots - will require new Mali graphic blobs
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997665
Changes:
- Initial Release
[8/8]ROM: http://www.androidfilehost.com/?fid=23060877489998605
Changes:
- Fix Screenshots (framework hack)
- CM Upstream Changes

---

Are the blobs something we'll have to wait for stock 4.3 on?
Sent from my SCH-I605 using xda app-developers app

---

akellar said:
Are the blobs something we'll have to wait for stock 4.3 on?
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
A leak from any device that uses the same Mali drivers would work, I believe we are using the ones from the note 8.0 now. It may also be possible to forward port framework bits from 10.1 to make the glitches go away.

---

Yay!

---

Awesome work!!
I may have to switch from touch wiz for this

---

Nice!!! I'll try this but I guess I'll need to flash cw recovery first.

---

Many thanks can't wait
Sent from my SCH-I605 using xda premium
---------- Post added at 03:21 AM ---------- Previous post was at 03:17 AM ----------
4.3 g apps
http://goo.im/devs/kashamalaga/gapps4.3/gapps-jb-4.3-20130726.zip
Sent from my SCH-I605 using xda premium

---

sbrissen said:
Disclaimer: I take no responsibility for bad things that may occur as a result of flashing this.
NOTE: If coming from 10.1, make a back up first as you will not be able to flash back to 10.1 unless you factory reset
These are Unofficial CM 10.2 builds for the Verizon Galaxy Note 2.
PreReq: Bootloader Unlocked!
It is recommended to flashed this in CWM .
Source: http://github.com/sbrissen
Instructions:
-Download and copy rom to sdcard
-Download and copy gapps to sdcard (make sure they are for 4.3!)
-Reboot into recovery (CWM)
-Flash rom
-Flash gapps
-Wipe data/cache
-Reboot
Known Bugs:
-May need to get a gps lock on stock before switching to CM in order for gps to work
-BT voice search
- Graphical glitches (i.e. black screens) - will require new Mali graphic blobs
- No screenshot or anything that relies on screenshots - will require new Mali graphic blobs
[8/1]ROM: http://www.androidfilehost.com/?fid=23060877489997665
Changes:
- Initial Release
Click to expand...
Click to collapse
Greatly and I mean greatly appreciated by us all!
Thank you so much!
This will be awesome for my crack flashing habbits, something to keep up with and watch progress, yesss

---

Kbizzle gives his stamp if approval. Thanks Scott. 4.3 FTW.
Sent from my Spaceship with Tapatalk 2.

---

Nice! A new thread!
Tried Ultimate Screenshots app from Play Store and it is glitchy but it did take screenshots. As little as I need em, I can live with it until the fix is in. Again, great job guys!

---

This is the new super su that works with 10.2 put file on SD boot into recovery and flash and wipe cache
http://forum.xda-developers.com/showthread.php?t=2385102
I installed 10.2 using twrp no problems
Sent from my SCH-I605 using @ndroid 4.3

---

xterra91 said:
This is the new super su that works with 10.2 put file on SD boot into recovery and flash and wipe cache
http://forum.xda-developers.com/showthread.php?t=2385102
I installed 10.2 using twrp no problems
Sent from my SCH-I605 using @ndroid 4.3
Click to expand...
Click to collapse
Nice was just coming back yo see if anyone had a fix for root
Sent from my SCH-I605 using Tapatalk 4 Beta

---

Glad to see the sep thread. Amazing work as always sbrissen. 7/30 has been flawless for me, except the graphical glitches in some apps. No biggie. Thanks for everything you do boss.
Sent from my SCH-I605 using Tapatalk 4 Beta

---

Seems like I can't get the 8/1 build to detect USB charging at all. 7/30 build worked fine in those regards.

---

AngryManMLS said:
Seems like I can't get the 8/1 build to detect USB charging at all. 7/30 build worked fine in those regards.
Click to expand...
Click to collapse
Weird I'm on 8/1 and it charges fine with both ac and dc charging
Sent from my SCH-I605 using Tapatalk 4

---

Im happy to see this. Thank you
beamed from transporter room 3

---

CM 10.2 for VZW Note 2 ROM review
Here is a quick review of the CM 10.2 Android 4.3 AOSP ROM. This is the first release so not a very detailed review. Follow the dev instructions and enjoy!!
http://youtu.be/NMxscqXLp-4

---

Root works in 10.2, just enable Dev Options and set root for apps and ADB. That's all I did.
Sent from my SCH-I605 using xda premium

---

veloct said:
Root works in 10.2, just enable Dev Options and set root for apps and ADB. That's all I did.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
Lol never even thought to check that
Sent from my SCH-I605 using Tapatalk 4

---

Are you able to reboot without any issues?
Sent from my SCH-I605 using xda premium