Need your help guys.
I accidentally wiped my Lenovo S890's rom via TWR as i try to go to its factory settings. Now my phone can only go to TWR and says no OS installed.
I tried several DIY steps found in the net but to no avail. The ROMs i downloaded from needrom wont work either.
Really appreciate your help guys. TIA
Hello!
I have a problem with my Jiayu G3, I rooted it using Bin4ry's method, and used CWM to flash Android 4.1.2 , all was finished well, but whenever I tried to powe the phone , it always went into a boot loop. I read somewhere to try and flash Lewa Recovery using CWM, and now the G3 won't even boot into CWM and Android.
Any help is much appreciated. Thank you.
Wade Tyler said:
Hello!
I have a problem with my Jiayu G3, I rooted it using Bin4ry's method, and used CWM to flash Android 4.1.2 , all was finished well, but whenever I tried to powe the phone , it always went into a boot loop. I read somewhere to try and flash Lewa Recovery using CWM, and now the G3 won't even boot into CWM and Android.
Any help is much appreciated. Thank you.
Click to expand...
Click to collapse
I think you will have to flash a new rom using mtk sp flash tool. You may have to try several versions before one works. Jiayu.es (in Spanish) should have all the files you need. Or, hopefully you made a backup and can just reflash cwm recovery and restore.
Hello Guys, Noob here.
I Rooted My LG E400 L3 Some Months Ago And Installed CWM And CyanogenMod 9 ICS - Nightly. But i removed It for Some Network Issues.
By Mistake I Did The OTA Update Usiing Software Update From The Device. After Updating I Just Get The CWM Recovery Screen On Booting. I Tried To Flash Some Backups, And CM9 Also But It Didn't Worked. I Also Tried Flashing Stockrom Which Also Failed! Finally I Tried To Flash The Firmware Using KDZ Updater But When In Emergency Mode I Flash The KDZ File It Says Phone Was Not Found! I Think It is Because My USB Debugging Is Not On And I Cannot Do It Also Coz The Phone Is Not Booting Up.
Please Help Me Guys What To Do!! Please Help ME!!
Sorry For Thread Name It Should be Device Not Booting Instead OF Not Rooting!
Hello,
I have a problem with my Lenovo. After updating my Lenovo K910 died - it wont boot. Shows Lenovo Logo and hang.
Reseting to factory default doesn't take effect.
I want to install new firmware, but it dont have SD slot, fastboot doesn't see device.
Any ideas for help?
Thanks a lot!
Regards,
Dice.
dice_man said:
Hello,
I have a problem with my Lenovo. After updating my Lenovo K910 died - it wont boot. Shows Lenovo Logo and hang.
Reseting to factory default doesn't take effect.
I want to install new firmware, but it dont have SD slot, fastboot doesn't see device.
Any ideas for help?
Thanks a lot!
Regards,
Dice.
Click to expand...
Click to collapse
Did you find any solution my friend? I have the same problem. I tried to install the latest 4.4.2 ROM and now i'm stuck in Lenovo logo...
Hello,
After many attempts Lenovo start fastboot mode...
You must hold power and volume down and get blue screen with restore options - then I succes fastboot.
Hold thums for you.
TomTomarin said:
Did you find any solution my friend? I have the same problem. I tried to install the latest 4.4.2 ROM and now i'm stuck in Lenovo logo...
Click to expand...
Click to collapse
Did you download it correctly? If you have finished download it open the file to check the file corrupted or not. Then you can flash it.
Sent from my Lenovo K910 using xda app-developers app
Problem with ROM 1423
Hi all,
I downloaded Vibe UI 1.5 1423, specifically the new chinese ROM called "CSROM--V1.7". Followed the qsb downgrade method and it worked like a charm but I realized that it had root but not google apps.
A while later, I decided to flash it again with gapps, in particular pa_gapps-modular-mini-4.4.2-20140421-signed ones. And surprisingly, when my K910 booted the SettingsWizard apk was continuosly FC'ing (I meant force closing, but you know it is very annoying...).
I want somebody who has any idea of frameworks and developing to comment if there is a solution for that ROM to be installed.
I am not able to post in the development zone, as I havent yet got privileges. Hope somebody could help... that ROM is the best I've ever seen for this device.
Anyone?
Enviado desde mi Lenovo K910 mediante Tapatalk
Problems to flash 4.4.2 ROM
Hi there!!!
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please (dual sim, no LTE, no external sd card enabled, current ROM : VIBEROM_V1.0_1407_2_ST_K910; android version 4.2.2)
I have tried many times the following two flashing methods, obtaining every time the same errors.
1- When I tried to flash the ROM 4.4.2 from the website needrom.com (LENOVO K910 VibeUI - 1421) through CWM recovery method (placing the rom on the root of the internal sd card of the phone) selecting installing from .zip in the recovery menu, the installation starts but it fails seconds after; then the screen shows:
Installing update
This package is for "kiton" devices: this is K910
E: Error in /temp/update.zip
(status 7)
Installation aborted
Its worth it to tell you that I tried to flash the rom by means of the sideloader there were no problems loading the rom.zip to the phone, when it started to install it, the process was aborted , presenting the same error presented above.
2- I also tried to perform a SD update to flash a former rom version... I do not really remember which one (it has a 226 on its name... a file with extension qsb) the error I got is as follows
SD Update
Dev: Internal Sdcard
Error: File size error
I would be very grateful if someone could help me to flash the rom ... give me some explanations on how to do it ... what other options I have got to do the flashing... etc
Thanks in advance
R
k910 wont boot
I think I may have bricked my phone. After trying to install 4.4.2 my phone won't boot. It just shows the Lenovo logo. Holding volume down and power button doesn't work either. When I connect my phone to a computer via USB I can use fastboot commands. When I try to boot into recovery using "fastboot boot recovery.img" it says FAILED (remote: Locked). Anyone have any idea what I could do?
ricschulz said:
Hi there!!!
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please (dual sim, no LTE, no external sd card enabled, current ROM : VIBEROM_V1.0_1407_2_ST_K910; android version 4.2.2)
I have tried many times the following two flashing methods, obtaining every time the same errors.
1- When I tried to flash the ROM 4.4.2 from the website needrom.com (LENOVO K910 VibeUI - 1421) through CWM recovery method (placing the rom on the root of the internal sd card of the phone) selecting installing from .zip in the recovery menu, the installation starts but it fails seconds after; then the screen shows:
Installing update
This package is for "kiton" devices: this is K910
E: Error in /temp/update.zip
(status 7)
Installation aborted
Its worth it to tell you that I tried to flash the rom by means of the sideloader there were no problems loading the rom.zip to the phone, when it started to install it, the process was aborted , presenting the same error presented above.
2- I also tried to perform a SD update to flash a former rom version... I do not really remember which one (it has a 226 on its name... a file with extension qsb) the error I got is as follows
SD Update
Dev: Internal Sdcard
Error: File size error
I would be very grateful if someone could help me to flash the rom ... give me some explanations on how to do it ... what other options I have got to do the flashing... etc
Thanks in advance
R
Click to expand...
Click to collapse
did you find solution for that
"This package is for "kiton" devices"
i coudlnt update to kitkat also, with this error.
ricschulz said:
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please
Click to expand...
Click to collapse
You probably have to flash the original 4.2.2. first, then follow the instructions on baralajbi's page.
Android 4.4.2
$275.99
wuna.ru
Keyboard
I just installed 4.4.2 (1503) and now there is no swipe function on the keyboard? Do anyone know what happened to it? Can't seem to find it in the settings either
Ugglaimossen said:
I just installed 4.4.2 (1503) and now there is no swipe function on the keyboard? Do anyone know what happened to it? Can't seem to find it in the settings either
Click to expand...
Click to collapse
ok I found it. Had to install Google keyboard and local keyboard layout. Now it works! *happy man* ☺
Sent from my Lenovo K910 using Tapatalk
dear xda members,
hello.
i am in need of your help to find a factory sharp sh837w rom that can be flashed with spflashtool.
the problem:i needed to hard reset the device but could not find recovery,so i formatted it with spflashtool.it can get connected and detected with spflashtool because the preloader is ok but there is no rom that can be flashed with spflashtool.i found a custom rom which is zip and needs recovery but i got no recovery.the phone is just like a dead one except it still has preloader intact.i found lenovo s890 to be near to this phone in terms of specification but i don't know if it's a good idea to flash lenovo's rom on it.
so could you kindly give me a link to a factory or whatever compatible rom that can be flashed with spflashtool?
thank you all.
no one can help me?