I am looking for a modification or an app that causes the LED to light up when in locksreen, as on MIUI. I don't know who came up with this feature on MIUI but its great and to my surprise I didn't found any apps that can do that.
How it works on MIUI?
The phone is in a locked state. You press home button for 0.5 - 1.0 seconds and the flashlight/torch is activated. After holding it for about 5 seconds, the phone vibrates and the flashlight goes into permanent ON state so you can release holding the home button. At any time, if you press home button again, the flashlight/torch is OFF.
How it works on Stock / Neat ROM / possibly everywhere else?
It doesn't.
Is there a way to get this MIUI feature everywhere?
Please, answer.
Code:
Model number
GT-I9100
Android Version
4.1.2
Baseband version
I9100XXMS2
Kernel version
3.0.31-1211311
[email protected] #3
SMP PREEMPT Thu May 16 10:05:20
KST 2013
Build number
XWLSW NeatROM Lite v4.8
sirNemanjapro said:
I am looking for a modification or an app that causes the LED to light up when in locksreen, as on MIUI. I don't know who came up with this feature on MIUI but its great and to my surprise I didn't found any apps that can do that.
How it works on MIUI?
The phone is in a locked state. You press home button for 0.5 - 1.0 seconds and the flashlight/torch is activated. After holding it for about 5 seconds, the phone vibrates and the flashlight goes into permanent ON state so you can release holding the home button. At any time, if you press home button again, the flashlight/torch is OFF.
How it works on Stock / Neat ROM / possibly everywhere else?
It doesn't.
Is there a way to get this MIUI feature everywhere?
Please, answer.
Click to expand...
Click to collapse
Hm I was trying to find a way in slimbean but I didn't find one. The idea is great though. I'll ask in slimbean thread for you.
Conny84 said:
Hm I was trying to find a way in slimbean but I didn't find one. The idea is great though. I'll ask in slimbean thread for you.
Click to expand...
Click to collapse
Thanks Conny, I'm thinking on sending a message to Sale (Salesale) of NeatROM as well.
Related
Okay here are my phone's specs:
Model number - SGH-T959
Android version - 2.3.5
Baseband version - T959UVKA7
Kernel version - 2.6.35.12-ge334261 [email protected] #1
Mod version - CyanogenMod-7-08252011-NIGHTLY-Vibrant
Build number - GRJ90
Click to expand...
Click to collapse
Here's when the problem started then I'll explain it.
I was trying to install this http://forum.xda-developers.com/showthread.php?t=751031
But when I did it said something about CM 3.0 doesn't support a certain kind of script so it aborted.
My problems:
When I turn on my phone it says that the Wi-Fi calling has stopped
I had it set so my phone would vibrate when I press the home bar buttons.
Every time I try to run the Wi-Fi calling ,it stops.
I have it set so when ever I press a button on the on-screen keyboard it should vibrate but it doesn't.
Thanks in advance.
If you need logs then I can get them, just need to tell me where they are.
EDIT - Also, the LEDs on my phone never blink, not when I have an email or text message, nor when I charge my phone. Is this just a limitation with CM7? Or how do I fix it?
Also, I realize that CM7 drains batteries pretty quickly, if you have a suggestion for an easy to install ROM/Kernel that is great at saving batteries, but keeps ADW, and most of the customization options available in CM7, do share.
Thanks again.
Also it seems that my phone is stuck charging at 57%
It's been there for a few hours now.
UPDATE -
I have it now so that the phone vibrates when I press a button with the on screen keyboard
It is charging past 57%
The home bar buttons still do not vibrate even though I have it set so they do.
UPDATE -
The video recording is very choppy. I took a video yesterday and it wasn't this choppy.
Umm so I'm guessing, nobody can help me?
Knightsofwar210 said:
Umm so I'm guessing, nobody can help me?
Click to expand...
Click to collapse
dunno bro,,, just try another kernel,, i think wolvireine is a good kernel,, im trying Reduct kernel better for OC, but i think it uses battery more then wolve!
http://download.cyanogenmod.com/?device=cooper
Go Download and Report Bugs Over Here
code.google.com/p/cyanogenmod/issues/
Sent from my GT-S5830 using xda premium
I just flashed RC released today, set up S2E, restored all my applications.
As people complained, Torch still doesn't work.
Now, Does anyone have the problem with Power Button? When my phone is on and I press power button, I'm forwarded to HOME.[/b] No doubt, when my screen is off I can turn it on through Power Button. But, its TURN OFF functionality doesn't work. I also couldn't find some sort of option to change this feature in Cyanogenmod Settings either.
PS: Problem solved with Power Button's behavior. I solved it by Spare parts option of customising End Button's Behavior.
I was tempted to flash RC but did not proceed after reading that bugs on Nightly release are still there.
alferic said:
I was tempted to flash RC but did not proceed after reading that bugs on Nightly release are still there.
Click to expand...
Click to collapse
100% Good decision.
Is the proximity sensor now fixed and the back and menu light bug?
Hi i just got my new galaxy s3 and it's really greate phone!!)
But i have a problem, when the phone is in navigate mode (google map\waze)
after 30 sec it's getting screen lock (light off) and i have to touch him every 30 sec to predict that. I tried to disable screen off option by using apps like "no screen off" from the play store, but it's still getting of.
Please help
It have the original firmware ,not rooted, apex louncher v1.2.2
android vers: 4.0.4
based vers: i9300JKLE8
kernel: 3.0.15-cl622527- [email protected]#1 smp preempt thu may 24...
build num: imm76d.i9300jkale2
I have the same problem.
Can someone please help how to make screen NOT turn off during gps navigation
chupchik said:
Hi i just got my new galaxy s3 and it's really greate phone!!)
But i have a problem, when the phone is in navigate mode (google map\waze)
after 30 sec it's getting screen lock (light off) and i have to touch him every 30 sec to predict that. I tried to disable screen off option by using apps like "no screen off" from the play store, but it's still getting of.
Please help
It have the original firmware ,not rooted, apex louncher v1.2.2
android vers: 4.0.4
based vers: i9300JKLE8
kernel: 3.0.15-cl622527- [email protected]#1 smp preempt thu may 24...
build num: imm76d.i9300jkale2
Click to expand...
Click to collapse
Have you treid to turn the screen timeout to it's highest value in settings?
squ89r97 said:
Have you treid to turn the screen timeout to it's highest value in settings?
Click to expand...
Click to collapse
The highest value in my settings is 10mn so that does not help so much ;/
Karthus said:
The highest value in my settings is 10mn so that does not help so much ;/
Click to expand...
Click to collapse
surely It's better than tapping it every 30s though?
I'll have a read around.
[EDIT] you're not using power saving mode are you? Just thought i'd ask.
squ89r97 said:
surely It's better than tapping it every 30s though?
I'll have a read around.
[EDIT] you're not using power saving mode are you? Just thought i'd ask.
Click to expand...
Click to collapse
it's better than tapping it every 30s yes but do you think you want to tap the phone every 10mn while driving in a distance of 500km or more?
Yes Im using power saving mode.
---------- Post added at 10:51 AM ---------- Previous post was at 10:29 AM ----------
I found the solution I guess.
It's under Settings | Developer Options | Stay Awake.
This allow the screen not to turn off while the phone is charged in the car. This is I guess the best solution, I did not find an other. Unless someone would like to use this app https://play.google.com/store/apps/...251bGwsMSwxLDEsIm5sLnN5bnRheGEuY2FmZmVpbmUiXQ
Karthus said:
it's better than tapping it every 30s yes but do you think you want to tap the phone every 10mn while driving in a distance of 500km or more?
Yes Im using power saving mode.
---------- Post added at 10:51 AM ---------- Previous post was at 10:29 AM ----------
I found the solution I guess.
It's under Settings | Developer Options | Stay Awake.
This allow the screen not to turn off while the phone is charged in the car. This is I guess the best solution, I did not find an other. Unless someone would like to use this app https://play.google.com/store/apps/...251bGwsMSwxLDEsIm5sLnN5bnRheGEuY2FmZmVpbmUiXQ
Click to expand...
Click to collapse
Sounds like it would work! And you're right I would not want to be tapping the screen every 10mins or so!
Like most people I updated to the 4.3 and the new base band through the sony pc companion and everything was great for the first week, but then the red flags started to go off and here is the list:
- My games and apps that were working fine would not open even sonys stock apps. Tried re starting the phone and it would still not let me use them.
- draw back issues on the lock screen (5sec) and home screen wallpaper (10 sec) plus it auto reverted back to an older wall paper.
- when I connect it to my dock the lock screen does not auto rotate to landscape mode.
I have gone back to factory reset but issue number 2-3 still persist. Can any one help me either solve these issues or tell me the best way to downgrade to the 4.2 stock firmware.
MOEL C6833
current base band is 8974-AAAAANAZQ-10270025-26
KERNEL VERSION
3.4.0-PERF-G4F35567
[email protected]#1
TUE NOV 19 19:53:25 2013
BUILD NUMBER
14.2.A.0.290
Any help will be greatly appreciated. Thanks.
ujan1 said:
Like most people I updated to the 4.3 and the new base band through the sony pc companion and everything was great for the first week, but then the red flags started to go off and here is the list:
- My games and apps that were working fine would not open even sonys stock apps. Tried re starting the phone and it would still not let me use them.
- draw back issues on the lock screen (5sec) and home screen wallpaper (10 sec) plus it auto reverted back to an older wall paper.
- when I connect it to my dock the lock screen does not auto rotate to landscape mode.
I have gone back to factory reset but issue number 2-3 still persist. Can any one help me either solve these issues or tell me the best way to downgrade to the 4.2 stock firmware.
MOEL C6833
current base band is 8974-AAAAANAZQ-10270025-26
KERNEL VERSION
3.4.0-PERF-G4F35567
[email protected]#1
TUE NOV 19 19:53:25 2013
BUILD NUMBER
14.2.A.0.290
Any help will be greatly appreciated. Thanks.
Click to expand...
Click to collapse
Do a repair via the Sony PC companion for windows or sony bridge for mac. It may help.
My issue is the dialer. If I answer or call someone, the screen goes black.
Sent from my C6833 using Tapatalk 4
Leechoonhwee said:
My issue is the dialer. If I answer or call someone, the screen goes black.
Sent from my C6833 using Tapatalk 4
Click to expand...
Click to collapse
Do you use front screen protector? maybe you need to replace it with the better one (clear) or use screen protector that has a hole to make the proximity sensor side not covered.
Leechoonhwee said:
My issue is the dialer. If I answer or call someone, the screen goes black.
Sent from my C6833 using Tapatalk 4
Click to expand...
Click to collapse
That happened to me too after updating to 4.3. A reboot fixed it temporarily, but i haven't had any issues after i did a full wipe.
ujan1 said:
Like most people I updated to the 4.3 and the new base band through the sony pc companion and everything was great for the first week, but then the red flags started to go off and here is the list:
- My games and apps that were working fine would not open even sonys stock apps. Tried re starting the phone and it would still not let me use them.
- draw back issues on the lock screen (5sec) and home screen wallpaper (10 sec) plus it auto reverted back to an older wall paper.
- when I connect it to my dock the lock screen does not auto rotate to landscape mode.
I have gone back to factory reset but issue number 2-3 still persist. Can any one help me either solve these issues or tell me the best way to downgrade to the 4.2 stock firmware.
MOEL C6833
current base band is 8974-AAAAANAZQ-10270025-26
KERNEL VERSION
3.4.0-PERF-G4F35567
[email protected]#1
TUE NOV 19 19:53:25 2013
BUILD NUMBER
14.2.A.0.290
Any help will be greatly appreciated. Thanks.
Click to expand...
Click to collapse
- Bluetooh Share Force Closing when Bluetooth is turned off (Not always)
- Launcher redraw is a bit common with 4.3 but loading it back doesn't take too much time due to fast hardware so no big complaint
- Sketch and Note app should be able to be placed at landscape mode. But it's a minor issue.
- Superior Auto Mode.. Man, i do really wish that they just need to reduce the ISO and then voila the result will be a lot better! Tested in Manual Mode and it is confirmed that ISO bigger than 400 will destroy the picture quality, lot of smudges and artifact everywhere!
abuihsan said:
Do you use front screen protector? maybe you need to replace it with the better one (clear) or use screen protector that has a hole to make the proximity sensor side not covered.
Click to expand...
Click to collapse
No screen protector on at all.
LordManhattan said:
That happened to me too after updating to 4.3. A reboot fixed it temporarily, but i haven't had any issues after i did a full wipe.
Click to expand...
Click to collapse
Well. Will try that if it is possible
Hi, after upgrading to 4.3, here are some issues:
+ Device heating + battery super drain
after a lot of flashing and tweaking (not twerking), the current situation is:
+ Normal heat, battery still drain like hell, Android OS takes up to 70%
Hello. I can't find anything about this problem. I want you to help me.
Everytime I press the power button to go to sleep my s3 takes one second break and then the screen goes off. What is the problem?
Some information:
CyanogenMod 11 (SNAPSHOT M12);
GT-I9300;
Stock kernel;
No changes to CPU.
IndeXez said:
Hello. I can't find anything about this problem. I want you to help me.
Everytime I press the power button to go to sleep my s3 takes one second break and then the screen goes off. What is the problem?
Some information:
CyanogenMod 11 (SNAPSHOT M12);
GT-I9300;
Stock kernel;
No changes to CPU.
Click to expand...
Click to collapse
try and re-flash or flash nightly build, with stock kernel. that should fix your problem
disclwd65 said:
try and re-flash or flash nightly build, with stock kernel. that should fix your problem
Click to expand...
Click to collapse
Nope, it doesn't fix it.
IndeXez said:
Hello. I can't find anything about this problem. I want you to help me.
Everytime I press the power button to go to sleep my s3 takes one second break and then the screen goes off. What is the problem?
Some information:
CyanogenMod 11 (SNAPSHOT M12);
GT-I9300;
Stock kernel;
No changes to CPU.
Click to expand...
Click to collapse
What do you mean?
Is this problem UNUSUAL? - maybe it's intention‼
IndeXez said:
Nope, it doesn't fix it.
Click to expand...
Click to collapse
did you try an different kernel other then stock like Boeffla/archikerel/arter97?
or maybe a different rom not cm but aosp/omni/slim
i do believe it's an software issue rather then hardware
Hannah Stern said:
What do you mean?
Is this problem UNUSUAL? - maybe it's intention‼
Click to expand...
Click to collapse
I mean, that if I want my phone to go to sleep it takes a second (screen stays on for a second) and then he sleeps. No matter if I press the power button or double tap the status bar.
IndeXez said:
I mean, that if I want my phone to go to sleep it takes a second (screen stays on for a second) and then he sleeps. No matter if I press the power button or double tap the status bar.
Click to expand...
Click to collapse
Please check the Settings.
Example: If S-Voice by Double HOme Button is activated, going to the Home Screen has also a short delay.
Hannah Stern said:
Please check the Settings.
Example: If S-Voice by Double HOme Button is activated, going to the Home Screen has also a short delay.
Click to expand...
Click to collapse
I'm not on stock android. That's why I wrote the information.
So ask your rom chef for help
IndeXez said:
Hello. I can't find anything about this problem. I want you to help me.
Everytime I press the power button to go to sleep my s3 takes one second break and then the screen goes off. What is the problem?
Some information:
CyanogenMod 11 (SNAPSHOT M12);
GT-I9300;
Stock kernel;
No changes to CPU.
Click to expand...
Click to collapse
It is a small issue caused by the HWComposer and is fixed in PAC rom. The issue is based on a commit that the Cyanogen guys maybe forgot to include in the buildbot's config. http://forum.xda-developers.com/galaxy-s3/development/rom-pac-nightlies-t2668572 .