After flashing the CyanogenMod 10.2 ROM and nexus 4 modem my phones auto rotate has been broken, it rotates the opposite way! I have now done a system, factory, cache wipe and installed CyanogenMod 10.1 its still broken! Even tried installing a custom kernel, still not working right... Anyone?
Sent from my LG-E970 using xda premium
jetpackjeff said:
After flashing the CyanogenMod 10.2 ROM and nexus 4 modem my phones auto rotate has been broken, it rotates the opposite way! I have now done a system, factory, cache wipe and installed CyanogenMod 10.1 its still broken! Even tried installing a custom kernel, still not working right... Anyone?
Sent from my LG-E970 using xda premium
Click to expand...
Click to collapse
Did You Try LGNPSTing V20j ?
Regards,
acervenky,
XPT
Related
hello poeple i have pac rom and its working great except the sound
its disappearing after few hours of booting phone or letting it away
no sound in music , no sound in viber , no sound in vid
i reflashed but nothing happened
please help
edit:: it doesnt work again unless i reboot
Start from the basics back up your apps and reinstall the Rom and kernel.
Maybe it's a app you have installed that's causing the problem, so install them one at a time if the above options fails
Sent from my YP-G70 using xda premium
and if you suggest a full wipe so would you recommend pac rom or what other rom??
An1mus said:
Start from the basics back up your apps and reinstall the Rom and kernel.
Maybe it's a app you have installed that's causing the problem, so install them one at a time if the above options fails
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
hey
thanks for your help, i reflashed this rom but the problem is still there i also wiped cache and dalvic cache but its the same
do you mean i have to do a full wipe??
rashad543 said:
hey
thanks for your help, i reflashed this rom but the problem is still there i also wiped cache and dalvic cache but its the same
do you mean i have to do a full wipe??
Click to expand...
Click to collapse
Do a full wipe, everything except EMC AND SD
Redownload your rom to make sure, do you have that problem on CM10. 1?
Sent from my YP-G70 using xda premium
An1mus said:
Do a full wipe, everything except EMC AND SD
Redownload your rom to make sure, do you have that problem on CM10. 1?
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
thanks for your reply
i'll try the full wipe even though i dont like installing everything again
and i dont know about cm10.1 because i didnt try and rom other than pac rom
Give cm10 a try and go from there
Sent from my YP-G70 using xda premium
Please read rule 15
Development is for developers to post work
Thread moved
An1mus said:
Give cm10 a try and go from there
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
for sure i will if you say so but do you have any rom in your mind my friend??:fingers-crossed:
Hey everyone was wondering of I could get a hand. I recently got a Samsung galaxy player 5.0 US version. I have it rooted and cwm recovery installed. When I try to flash a Rom I get a status 7 error is there a way to fix this. Also my capacitive buttons have stopped working as well . Any help will be appreciated, thanks
jdaub89 said:
Hey everyone was wondering of I could get a hand. I recently got a Samsung galaxy player 5.0 US version. I have it rooted and cwm recovery installed. When I try to flash a Rom I get a status 7 error is there a way to fix this. Also my capacitive buttons have stopped working as well . Any help will be appreciated, thanks
Click to expand...
Click to collapse
This should have been posted in the q&a.
Also try to redownload the zip and try to wipe /system
Sent from my YP-G1 using Tapatalk 2
goldflame09 said:
This should have been posted in the q&a.
Also try to redownload the zip and try to wipe /system
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
By wipe system do you mean format it. I think the only thing that I can specifically wipe is data,dalvik cache,and cache
jdaub89 said:
By wipe system do you mean format it. I think the only thing that I can specifically wipe is data,dalvik cache,and cache
Click to expand...
Click to collapse
By that I mean
Recovery - mounts and storage - format system
Sent from my Kindle Fire running CM10.1/SGT7
Ok I did that and I still get the error it happened with Pac man Rom and paranoid android downloaded the US version. Which is what I have. I've flashed things before on my one x and nexus 7 and never had a problem so I'm lost. I attached a picture of the error message
Sent from my HTC One X using xda app-developers app
jdaub89 said:
Ok I did that and I still get the error it happened with Pac man Rom and paranoid android downloaded the US version. Which is what I have. I've flashed things before on my one x and nexus 7 and never had a problem so I'm lost. I attached a picture of the error message
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Flash jellybean 4.1 first then install cm 10.1.
Sent from my Nexus 7 using Tapatalk HD
zaclimon said:
Flash jellybean 4.1 first then install cm 10.1.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
actually, i think he has to flash cm9 first, because some users experienced the same problem going from gb to 4.1
iurnait said:
actually, i think he has to flash cm9 first, because some users experienced the same problem going from gb to 4.1
Click to expand...
Click to collapse
im gonna have to agree with that one cause i have someone with the same problem. told him to go to cm9 and he said he could get on cm9 but not cm10 from gb
That worked out perfectly thank you very much!!
Sent from my HTC One X using xda app-developers app
I had the same problem with the keys not working. Do you know how to fix that?
Sent from my SCH-I535 using xda app-developers app
Hello community. I have a problem with the pac man rom for my Samsung galaxy s2 (i9100).
Always when the screen turns off, a soft reboot happens. Updating to the newest nightly didn't help. So, is that a known issue or am I the only person, who recognized that?
It's pretty annoying, so I hope you can help me. I Googled a lot but couldn't find anything about that. So please don't flame me.....
Thank you
Sent from my GT-I9100 using xda app-developers app
Fidinator said:
Hello community. I have a problem with the pac man rom for my Samsung galaxy s2 (i9100).
Always when the screen turns off, a soft reboot happens. Updating to the newest nightly didn't help. So, is that a known issue or am I the only person, who recognized that?
It's pretty annoying, so I hope you can help me. I Googled a lot but couldn't find anything about that. So please don't flame me.....
Thank you
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Is this only in nightlies?Have you tried the stable version?What kernel are you using?
26/6/2013 with dori 9.32 ok here.
No. Not only in nightlies. I first had a stable version, but somebody recommended me to try a nightly. As you see... Same problem. I didn't change the kernel when I came from cyanogenmod. I tried the dorimanx 9.13 with the stable version but it was even worse. Instead of a soft reboot, the screen stayed black and I couldn't do anything.
I can try dorimanx with the nightly but I don't think that that would solve the problem.
Sent from my GT-I9100 using xda app-developers app
Ok, I tried nightly 29.06. with dori 9.33. Same problem. It's strange. Obviously nobody has the problem too.
Sent from my GT-I9100 using xda app-developers app
Fidinator said:
Ok, I tried nightly 29.06. with dori 9.33. Same problem. It's strange. Obviously nobody has the problem too.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
1) go for a full wipe install.
2)stay on the stock kernel that comes with the rom for a while and see if u have any soft reboot issue.
Oh yes, I tried that in this moment, but with dorimanx and no soft reboot (woohoo). So the reason must hide anywhere in my user data. How can I find out where?
Thank you
Sent from my GT-I9100 using xda app-developers app
Fidinator said:
Oh yes, I tried that in this moment, but with dorimanx and no soft reboot (woohoo). So the reason must hide anywhere in my user data. How can I find out where?
Thank you
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
its very diff to pin point exactly where the issue is ( may be some left over data of previous rom/kernel/mod/theme might be causing it
but the best solution during it is a Full wipe install
so for now u have a wrk'ng phone without any issue of soft reboots, so enjoy it
cheers!!!!
Ok I can explain it again.
I had cyanogenmod and thought it was cool to use these hybrid options. So I decided to flash pac man rom 23.0.0. I followed the installing instructions in the xda thread of the rom (including wipe data and cache and dalvik cache). After that I played a bit in the options and restored all my apps via titanium backup. But then I experience my first soft reboots. I didn't know why, couldn't find solutions in the Internet. So I tried another kernel: dorimanx. Now I still had soft reboots but without the bootanimation (only black screen).
Then the xda member bluefa1con said I should flash the newest nightly. I did but I still had the soft reboots. Today I wiped everything, flashed the pac man rom again and had no soft reboots (for at least one hour). Ok that's everything.
I don't want an empty phone without my data. I want to keep my apps. So is there a way to find out what's the reason for the soft boots except wiping and restoring app for app and waiting until I have soft reboots again? Maybe only root apps can cause this....
Thank you.
Sent from my GT-I9100 using xda app-developers app
Hi guys
I tried some roms some days ago, thereunder paranoid android 3.99 and well, I liked it. The only problem i was facing that it was extremely laggy for example when i was scrolling the homescreen or the drawer.
When reading user opinions however i didn't saw anything about that and now I'm wondering if I'm doing something wrong?
Sent from my GT-i9100 using xda app-developers app
Did you format on install or just factory reset? Do a full format and then flash the rom and test.
andrewwright said:
Did you format on install or just factory reset? Do a full format and then flash the rom and test.
Click to expand...
Click to collapse
I always wipe everything what can be wiped in cwm when installing a new rom
Sent from my GT-i9100 using xda app-developers app
By the way if someone is facing the same problem: it just took some time to boot everything. After 10 minutes the rom was working fluently if the problem still persists try to use "pure performances" here on xda.
Sent from my GT-I9100 using xda app-developers app
Title pretty much sums it up. I downloaded sensor box for android to check what's up and accelerometer,orientation and possibly magnetic sensors are not working. Haven't changed the kernel. Rom's version is the latest. If you need any other info please ask me.
The ROM was downloaded from the official website (cannot post link because just registered)
It is the latest one (the top one):
Build Version: 4.6
Build Date: 2014-10-22
Size: 162.85 MB
MD5: 7e30be9b71c1af23b34c8dbfeeb3498a
File: pa_i9300-4.6-BETA5-20141022.zip
Click to expand...
Click to collapse
xDave7 said:
Title pretty much sums it up. I downloaded sensor box for android to check what's up and accelerometer,orientation and possibly magnetic sensors are not working. Haven't changed the kernel. Rom's version is the latest. If you need any other info please ask me.
The ROM was downloaded from the official website (cannot post link because just registered)
It is the latest one (the top one):
Click to expand...
Click to collapse
Try to reflash the rom with wipe cache and dalvik cache and try again.
Sent from my GT-I9300 using XDA Free mobile app
Do I have to factory reset as well? Or should I just wipe cache, wipe dalvik and then reflash the room?
Just want to be sure so I don't screw up my phone
xDave7 said:
Do I have to factory reset as well? Or should I just wipe cache, wipe dalvik and then reflash the room?
Click to expand...
Click to collapse
Just wipe cache and dalvik then reflash the rom.
And after relfashed the rom wipe cache and dalvik cache.
Sent from my GT-I9300 using XDA Free mobile app
Done what you said, accelerometer still dead
xDave7 said:
Done what you said, accelerometer still dead
Click to expand...
Click to collapse
Try to flash the latest stock rom and look if your pho'e have a problem
Sent from my GT-I9300 using XDA Free mobile app
I doubt it's hardware issues since everything was fine before I flashed the custom ROM. Perhaps I should try to flash the latest stable version of PA because this one is BETA?
Can I downgrade by just flashing or is there a specific process?
xDave7 said:
I doubt it's hardware issues since everything was fine before I flashed the custom ROM. Perhaps I should try to flash the latest stable version of PA because this one is BETA?
Can I downgrade by just flashing or is there a specific process?
Click to expand...
Click to collapse
Try a clean install for a downgrade for be sure there are no issues or bug's with the downgraded rom
Sent from my GT-I9300 using XDA Free mobile app
I've gone back to the original ROM, yet sensors still not working...
xDave7 said:
I've gone back to the original ROM, yet sensors still not working...
Click to expand...
Click to collapse
Okay try to use a 3rd app for look if you can use rotation normally without autorotation
Sent from my GT-I9300 using XDA Free mobile app
KeTuRr74 said:
Okay try to use a 3rd app for look if you can use rotation normally without autorotation
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Still didn't work, checked from *#0*# and accelerometer didn't show any info as well as magnetic sensor. Same situation after a deep clean...
xDave7 said:
Still didn't work, checked from *#0*# and accelerometer didn't show any info as well as magnetic sensor. Same situation after a deep clean...
Click to expand...
Click to collapse
It's fully hs :/
Sent from my GT-I9300 using XDA Free mobile app
HS stands for?
xDave7 said:
HS stands for?
Click to expand...
Click to collapse
Don't work*
Sent from my GT-I9300 using XDA Free mobile app