Related
I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
you should flash a stock FW via odin.
just make sure before starting odin you need to close all kies processes via task manager, this could lead to the failed operation.
GL
i tried it but it fails... :S
eytan123 said:
you should flash a stock FW via odin.
just make sure before starting odin you need to close all kies processes via task manager, this could lead to the failed operation.
GL
Click to expand...
Click to collapse
when i flash it,the process is success but after the flash,when I try to turn the device on just restarts over and over again when it reaches the samsung screen, the animated image, not the "samsung galaxy s3" beggining image
Go into recovery and do a reset after the flash
1) Flash a stock ROM via ODIN
2) If it keeps restarting at the Samsung logo, go into recovery (turn the phone off and then hold volume up + home button + power button until the Android appears) and factory reset/wipe data.
3) Restart
DeadSOL said:
1) Flash a stock ROM via ODIN
2) If it keeps restarting at the Samsung logo, go into recovery (turn the phone off and then hold volume up + home button + power button until the Android appears) and factory reset/wipe data.
3) Restart
Click to expand...
Click to collapse
after the flash i cant enter to recovery mode...
davidmartins said:
after the flash i cant enter to recovery mode...
Click to expand...
Click to collapse
You will need to flash 3 things
1. Stock firmware
2. Cf auto root
3. CWM recovery touch
And then enter into recovery and make a reser
Sent from my GT-I9300
Recovering a bricked Galaxy S3
davidmartins said:
I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
Click to expand...
Click to collapse
I've got a Galaxy S3 which goes into a reboot loop from time to time and I found this which should help you:
http://reviews.cnet.co.uk/mobile-phones/how-to-recover-a-bricked-samsung-galaxy-s3-50009490/
I'd be interested to know if it solves your problem.
JohnOfStony said:
I've got a Galaxy S3 which goes into a reboot loop from time to time and I found this which should help you:
http://reviews.cnet.co.uk/mobile-phones/how-to-recover-a-bricked-samsung-galaxy-s3-50009490/
I'd be interested to know if it solves your problem.
Click to expand...
Click to collapse
Sorry but...I´ve done it and it reboots like before... Really thank you even so...
Problem...
I think i fried the EMMC... because when i try to flash the pit it doesn´t works...
But when I try to flash a PDA file, the stock rom, it flash succesly, but after the flash, it reboots continuously... i think the partition of bootloader is the bad flashed here...
If you´ve got other pit files can you post here the url? Thanks!
davidmartins said:
I think i fried the EMMC... because when i try to flash the pit it doesn´t works...
But when I try to flash a PDA file, the stock rom, it flash succesly, but after the flash, it reboots continuously... i think the partition of bootloader is the bad flashed here...
If you´ve got other pit files can you post here the url? Thanks!
Click to expand...
Click to collapse
When stock rom has flashed by odin each write is verified and if any error is found will be logged in odin textarea.
So, probably problem is not emmc.
The common cause to boot loop is data partition has been corrupted.
To solve is necessary format data partition.
To boot direct in recovery mode, use the combination volume_up+home+power.
Use recovery menu to issue the factory reset.
davidmartins said:
I have a bricked i9300 galaxy s3 16gb,i have it bricked 3 months or more...i want to resurrect it, but i dont know how... Please, help, I had flashed every kind of roms but it doesn´t starts,it continuously reboot in the samsung screen,i delete ALL in the odin but without any success... Please help me, i am not a developer,I am a spanish 18 years old and I am very lost...please help...
I tryed to flash the stock rom of samsung
I9300XXELLC
I tryed to flash the "unbrick" method of the 2nac program but it fails when it starts to flash (it fails when he beggins to flash "boot.img")
http://www.2nas.com/index.php/site/page?view=howto#unbrick
I tryed to flash the resurrect rom to unbrick it
http://checkrom.com/threads/resurrection-odin-checkrom-evohd™-v4.896/
And all this methods of unbrick failed. Now, I am trying to flash this
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
This is the message of odin when I flash the files
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don´t know why it fails, because when i flash only a PDA file,the stock rom for example,it flash perfectly, but when I flash other files it fails.
Somebody can help me??? PLEASE...
Click to expand...
Click to collapse
Dear Brother I think u flash stock recovery 1st and then try to flash new rom.then f-reset and restart,mey bit solve.sorry 4 my bad English.find zip 4 sotck recovery
sam77744 said:
Dear Brother I think u flash stock recovery 1st and then try to flash new rom.then f-reset and restart,mey bit solve.sorry 4 my bad English.find zip 4 sotck recovery
Click to expand...
Click to collapse
flash via odin
I've tried same as davidmartins but all failed w/ the same Odin log.
Initial rom on my S3 was I9300XXLEF (Hong Kong) and I flashed Samsung Galaxy S III GT-I9300 Stock Firmware Collection I9300XXEMA2 after that it didn’t re-boot because of wrong ROM, if I try to get into recovery it shows the “Firmware upgrade encountered issue. Please select recovery mode in Kies & try again” screen.
I tried also to re-flash the Stock FW but failed too.
Any further advise to bring my S III back to life would be highly appreciated.
Cheers.....LinChina
your motherboard are dead .. I had the same problem with an HTC HD2. motherboard has failed without doing something wrong.
andreivibefm said:
your motherboard are dead .. I had the same problem with an HTC HD2. motherboard has failed without doing something wrong.
Click to expand...
Click to collapse
i will do a JTAG in a week.If it doesn´t works, I will buy another galaxy s3 T.T
davidmartins said:
i will do a JTAG in a week.If it doesn´t works, I will buy another galaxy s3 T.T
Click to expand...
Click to collapse
y havet same isuse bat y resolvet . try to flash diferent cw recovery and then the room
sory for bad eng.
I was on one of Omega roms. The phone suddenly stopped working
I had to remove the battery and the phone got stock on the Omega boot animation.
I tried to factory reset and i get nothing. I can't format thee /data partition through CWM.
Any Ideas??
Flash stock rom via Odin .
jje
JJEgan said:
Flash stock rom via Odin .
jje
Click to expand...
Click to collapse
thanks. that was my first idea. the firmware is taking too long to download though. hopefully it will work.
Sent from my PadFone 2 using Tapatalk 2
JJEgan said:
Flash stock rom via Odin .
jje
Click to expand...
Click to collapse
I tried to flash the stock firmware
I get this message on Odin,
<ID:0/034> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMB5_I9300OXAEMB5_996085_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/034> Odin v.3 engine (ID:34)..
<ID:0/034> File analysis..
<ID:0/034> SetupConnection..
<ID:0/034> Initialzation..
<ID:0/034> Get PIT for mapping..
<ID:0/034>
<ID:0/034> There is no PIT partition.
Does anyone have an idea what i should be doing?
Will I have to send it for repair?/
hello everyone, my case it's the following, I has installed the rom (I9300XXUFME3 (UNOFFICIAL – LEAK) ) but of course this one it's very unstable. finally I has re-installed the original rom, and has actualized automaticaly, after of this the phone wont boot again. i tried to re install via odin another rom, kernel, etc but nothing works. finally the error its beacues the pit file doesn't exist. i tried to install it via odin but dont work. im lossing my hope of have the phone again.
note: i forgot to root my phone so... can't run recovery mode.
Would have had to factory reset going from leak back to official. Can be done from stock recovery.
Although who knows now? You maybe flashed to death
Sent from my GT-I9300 using Tapatalk 4
If you didn't factory reset before going back to official you will end up with such issue. Go to stock recovery and wipe all data and install fw via Odin again
Sent from my GT-I9300 using Tapatalk 4 Beta
chris_marsh said:
If you didn't factory reset before going back to official you will end up with such issue. Go to stock recovery and wipe all data and install fw via Odin again
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
thanks for your comments, the problem it's wich I can't enter in recovery mode. (home + volume up + power) nothing happens.
Sounds like you've broken it. Recovery rom version only option probably ....
Sent from my GT-I9300 using Tapatalk 4
rootSU said:
Sounds like you've broken it. Recovery rom version only option probably ....
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
I tried to run the recovery rom version but odin report an error when I try.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Send for repair
Sent from my GT-I9300 using Tapatalk 4
Make sure your reparation option is NOT ticked in Odin or as above said send for repair
Sent from my GT-I9300 using Tapatalk 4 Beta
Well... I'll try bringing to samsung service center, if haven't find a solution, I'll close this post.
thanks to everyone.
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
KizzleKat said:
This is my first thread, so hello!
Me and my sister both have a S5839i, and my sisters just randomly bricked, and it is on a boot loop.
I have tried EVERYTHING online- recovery mode, downloading firmware with odin...you name it.
I have used the totoro_0623.pit file, and on Odin, it said it passed. But then trying with all the other firmware, it didn't work.
Yes, I am using the right version of Odin, and I don't have Kies running at the same time as Odin.
This is what happens when I put S5839IBULL1_S5839IVD2LH1_VD2.tar.md5 into the PDA section in Odin. This is the Germany Vodafone firmware, someone else posted in the forums. I have tried the UK one with the 3 network (what my region and network is) , but that doesn't work either, and comes up with the same thing in Odin.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5839iBULL1_S5839iVD2LH1_S5839iBULK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Am I just stupid, and have missed something, or is there another way? Please note : The phone is not modded in anyway, not even rooted, but the warranty has run out.
Thankyou
Click to expand...
Click to collapse
Get the official firmware needed on Sammobile.com, you need an account on there. Don't worry it's free. Flash it as PDA on Odin. Make sure your phone is in download mode (volume up+volume down+power). If it boots, the boot animation might start looping. From theres you can access recovery (volume up+power+home). In recovery you wipe data and wipe cache and select reboot. It should work.
Sent from my GT-I8190N using Tapatalk
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Galaxy_Ace_Love said:
Hi
Don't panic !
Is not a brick, but Odin doesn't support one file (PDA) package.
You need to use Odinatrix to create a 3 files firmware or download a 3 files firmwares
Click to expand...
Click to collapse
Odin 3.07 supports one file package
Humm...
iamareebjamal said:
Odin 3.07 supports one file package
Click to expand...
Click to collapse
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
KizzleKat said:
I used Odin 3.07, and that worked... but when the phone loaded and installed - it said "Failed to mount /data (invalid argument)" and continued to boot loop. I thought by installing the firmware and re-partitioning it would fix that :/
Click to expand...
Click to collapse
Format the data
Put the pit file and tick Repartition. And then flash with Odin.
And you have to use Cooperve pit, not Totoro, it's for SGY
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
KizzleKat said:
Yeah, I have ticked the re-partion and stuff. Apparently totoro works with Ace as well? All the tutorials say that...
I will still try though
Edit: Tried and still no luck....
Sent from my GT-S5839i using xda app-developers app
Click to expand...
Click to collapse
Follow these Guidehttp://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using Tapatalk 2
I bought this phone online. I do not know the history of it. When I got it, the phone was hanging/booting up to MetroPCs logo. I tried flashing it but it seems that I messed up more, even flashing the phone with the original firmware. I also tried flashing the 4 firmware files through ODIN. After many attempts, ODIN was asking for the PIT file. I downloaded the PIT (http://chomikuj.pl/zabrzesklep/*e2*...GH-T399/T399_garda.pit,4041671026.zip(archive)) and flashed it through ODIN along with the factory firmware but it did not work. Then I thought that the downloaded PIT file could have been corrupted. So I extract the PIT file from a second working SGH-T399 phone (https://techbeasts.com/2015/04/07/how-to-extract-pit-file-from-samsung-devices/). I extracted the PIT file and tried flashing the damaged T399N but ODIN gets stuck on the "Get PIT for mapping.." message:
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T399NUVUANK3_CL2903595_QB2893704_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> Get PIT for mapping..
Or, if I tried flashing all 4 files (BL,PDA,Phone,CSC) then I get the "There is no PIT partition":
<ID:0/015> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_T399NUVUANK3_CL2903595_QB2893704_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T399NUVUANK3_CL2903595_QB2893704_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_T399NUVUANK3_CL2903595_QB2893704_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_TMB_T399NTMBANK3_CL2903595_QB2893704_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/015> Odin v.3 engine (ID:15)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Set PIT file..
<ID:0/015> DO NOT TURN OFF TARGET!!
<ID:0/015> Get PIT for mapping..
<ID:0/015>
<ID:0/015> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
As of now, the download mode shows:
ODIN MODE
PRODUCT NAME: SGH-T399N
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Secure Download : Enabled
Any help please!!!
Anybody?
This phone is completely bricked. It only allows me to enter to download mode.
I would like to fix the phone. I already have the PIT file but for some reason is not working. The phone is not entering to the recovery mode. Please help!
The phone is unsupported by Kies and Smart Switch.
GalaxyVibe said:
The phone is unsupported by Kies and Smart Switch.
Click to expand...
Click to collapse
have you tried a full odin image for the t399n ?
that may fix
DJ_Steve said:
have you tried a full odin image for the t399n ?
that may fix
Click to expand...
Click to collapse
Thanks for replying. When I try a full image on Odin, I get the PIT error
GalaxyVibe said:
Thanks for replying. When I try a full image on Odin, I get the PIT error
Click to expand...
Click to collapse
hi, do you have the pit, i have the same problem, thnks
jonathan_696 said:
hi, do you have the pit, i have the same problem, thnks
Click to expand...
Click to collapse
Hello there. Here it is:
http://forum.xda-developers.com/and...y-light-sgh-t399n-pit-file-t3292140?nocache=1
Hey Guys, I have not solved my issue yet. Help anybody?
Do you have the Tmo or Metro version? The first firmware you were trying is Metro and 2nd is Tmo. Edit: Sorry, just saw the CSC which mentioned Tmo but the other stuff references Metro.
You can also just try to Odin a custom recovery (recommend TWRP) then install a custom rom and see if that gets you booting at least.
es0tericcha0s said:
Do you have the Tmo or Metro version? The first firmware you were trying is Metro and 2nd is Tmo. Edit: Sorry, just saw the CSC which mentioned Tmo but the other stuff references Metro.
You can also just try to Odin a custom recovery (recommend TWRP) then install a custom rom and see if that gets you booting at least.
Click to expand...
Click to collapse
Hello there and thank you for replying! I have the SGH-T399N MetroPCS version. I tried installing anything but phone always says "No Pit". Again, I also tried the PIT file. I go the PIT out of a working SGH-T399N.
Most Samsungs don't need a separate pit file to fix softbricks. Not sure why the first file you mentioned didn't work. I'd try the custom recovery and rom method I mentioned and see what happens from there.
es0tericcha0s said:
Most Samsungs don't need a separate pit file to fix softbricks. Not sure why the first file you mentioned didn't work. I'd try the custom recovery and rom method I mentioned and see what happens from there.
Click to expand...
Click to collapse
The phone does not enter in recovery mode. Also, I tried installing a custom recovery but Odin always says "No Pit file" even though I set the PIT file on Odin separate. "NO Pit File" all the time in any Odin flash
Weird. I've only worked on one of those quite a while ago and never experienced this so hard to say what's going on. Which version of Odin are you running and are you using it in Admin mode? I think trying to use the pit might have made matters worse...
es0tericcha0s said:
Weird. I've only worked on one of those quite a while ago and never experienced this so hard to say what's going on. Which version of Odin are you running and are you using it in Admin mode? I think trying to use the pit might have made matters worse...
Click to expand...
Click to collapse
I have tried Odin versions: 1.85, 3.07, 3.09, 10.7, and 11.1. When you say "Admin Mode", do you mean Administrator privileges in Odin?
GalaxyVibe said:
I have tried Odin versions: 1.85, 3.07, 3.09, 10.7, and 11.1. When you say "Admin Mode", do you mean Administrator privileges in Odin?
Click to expand...
Click to collapse
Yea. What version of Windows are you using?
I am using Windows 8.1. I also tried flashing the phone on another computer with Windows 8.1 and I get the same error.
Try this one: https://www.androidfilehost.com/?fid=24052804347823379
It's the update that came out after the one you are trying. Make sure repartition is UNchecked.
es0tericcha0s said:
Try this one: https://www.androidfilehost.com/?fid=24052804347823379
It's the update that came out after the one you are trying. Make sure repartition is UNchecked.
Click to expand...
Click to collapse
I already tried T399NUVUANH1, T399NUVUANK3, and T399NUVUAOH3. I am still getting the same "NO Pit" error on Odin