[Q] Disable all calls & sms while keeping 3G active? VoIP related. - Android Q&A, Help & Troubleshooting

So I'm ready to make the switch to VoIP on a data-only plan.
The only obstacle is that my carrier will charge me an arm and a leg if I make/receive any calls/sms to the phone number assigned to the SIM.
How do I go about disabling these functions while keeping 3G data active?
I'm hoping for a solution that doesn't involve playing with the source (code nublet here)!
ALSO: Please don't suggest enabling air plane mode, as that completely disables the modem.
What I tried: Disabling the phone application, disabling the contacts, disabling the mms application.. Phone still receives calls

Related

data disconnects voice

Is there away to set the data connection to NOT connect while I am on a voice call?
Every so often ill be on a phone call with a client and suddenly my data connection activates.. probably from active sync... and it drops my voice calls.
Will I have this issue if I switch to HSPA on bells new network?
has no one else experienced this?
you need a GSM phone.
CDMA is ballz.
i hate bell.
so is there not away to set the phone not to connect while its on a voice call?
Will HSPA suffer from the same thing?
None of the roms I have used allow data to disconnect voice, but works other way around.
What rom are you using?

[Q] call blocker app to keep data connected?

Is there an application that can block calls and/or messages when I turn it on so that when the call comes the data connection isn't cut temporarily ? That way I can continue to download things..
Your data should not be cut will you have an active call unless its your network setup..

Internet connection and phone calling

Hi All,
I've updated my Titan to TANGO and new firmware (and radio fw), but I have the same problem I had with Mango:
Data (internet/mail/tethering (shared internet connection) does NOT work if a phone call is on!
IE: I used tethering with my PC, if a phone call come no data connection, when I closed the call data connection restart!
This happens with EDGE and most of the times even in HSDPA... with my previous HD2 (WP6.5) I could use interner with my PC (in tethering) having a call in the same time even with EDGE...
Is this happenng to someone else?
PS: I inserted manually APN to be sure it is correct... no changes
BYE
I am having the same thing happen to, when browsing the web I cannot receive phone call.
Stock rom: OS-7.10.8107.79
Firmware- 1600.2200.20501.401
Radio-16.23.06.10_16.32.00.23U
Boot loader-2.5.160015.3(137079)
On which roms are you guys? Stock or customs?
f.
You know that it is totally normal that you can´t use data if a phone call is active ???
hi,
this happend on Mango and happens with Tango too (official HTC rom)
When I receive a phone-call, connection data gets out and NO internet connectio!. When the call finish the internet restarts again.
This do not happen on DEll Venue PRo with official Tango: internet keeps going when i speak by phone, as on my old HD2 with WM6.5
HELP!
I often use internat-sharing (tethering) and if I receive a call I can not answer if I qant to keep the internet connection!
THANKS
drky said:
I am having the same thing happen to, when browsing the web I cannot receive phone call.
Stock rom: OS-7.10.8107.79
Firmware- 1600.2200.20501.401
Radio-16.23.06.10_16.32.00.23U
Boot loader-2.5.160015.3(137079)
Click to expand...
Click to collapse
Hi have the opposite problem:
when browsing the web I receive a phone-call, but if I answer internet stops (under EDGE, HSDPA...) and restarts when I finisch the call
It is not possible to have both data and voice in EDGE mode. That's the limitation of GSM radio on that mode.
You need to be in 3G mode in order to do so. Old WM phones can automatically disconnection data if there is call come in and reconnect after you handup.
zorroz said:
Hi have the opposite problem:
when browsing the web I receive a phone-call, but if I answer internet stops (under EDGE, HSDPA...) and restarts when I finisch the call
Click to expand...
Click to collapse
I preferred your your problem, (although I don't think it's a problem) I don't mine receiving phone call and losing data.
foxbat121 said:
It is not possible to have both data and voice in EDGE mode. That's the limitation of GSM radio on that mode.
You need to be in 3G mode in order to do so. Old WM phones can automatically disconnection data if there is call come in and reconnect after you handup.
Click to expand...
Click to collapse
No, on my Dell Venue Pro under EDGE I can surfing web and syncronize email while I'm calling!
I do it, but I don't with my Titan
After 1000 tests with 4 sim I can say:
- on my Titan I can call and have connection only under HSDPA if I manually set APN
- on other devices (Dell Venue Pro with WP7.5 Tango + HD2 WM6.5) I can call and surf the web with EDGE 3G HSDPA
is it only on my device?
I know that EDGE is not very often present, but it happens in Italy... and in some places where I work!
PLS, if someone could make a test... thanks in advance
zorroz said:
No, on my Dell Venue Pro under EDGE I can surfing web and syncronize email while I'm calling!
I do it, but I don't with my Titan
Click to expand...
Click to collapse
I don't know how your DVP does it but do a search and you will learn that it is not possible for EDGE connection to serve both voice and data. It could be that you are really connected to 3G but your DVP is reporting EDGE. Or your DVP has two separate radio, one for data, one for voice.
foxbat121 said:
I don't know how your DVP does it but do a search and you will learn that it is not possible for EDGE connection to serve both voice and data. It could be that you are really connected to 3G but your DVP is reporting EDGE. Or your DVP has two separate radio, one for data, one for voice.
Click to expand...
Click to collapse
Thanks for your suggestions!
I searched in the web, and maybe I found out the answer from
http://www.techrepublic.com/forum/q...a-gets-disconnected-when-call-comes-on-mobile :
EDGE (and GPRS) are capable of supporting simultaneous voice and data ONLY if it is a Class C device.
Most phones these days are Class B (such as iPhone).
Class B support voice calls while in data mode (data disconnects when a call comes in) and data is "attached" while the phone is idle. Some Class B devices are configured so that the data takes priority (iPhone). Thus an iPhone will not take a call when an active edge data transfer is ongoing..it goes to voicemail.
Class A devices are either in data mode or voice mode (but never both).
even supported here:
http://reviews.cnet.com/8301-19512_7-10115034-233.html
"GPRS network 130 can be designed to operate in three network operation modes (NOM1, NOM2 and NOM3). A network operation modes of a GPRS network is indicated by a parameter in system information messages transmitted within a cell. The system information messages dictates a MS where to listen for paging messages and how signal towards the network. The network operation mode represents the capabilities of the GPRS network. In a NOM1 network, a MS can receive pages from a circuit switched domain (voice call) when engaged in a data call. The MS can suspend the data call or take both simultaneously, depending on the ability of the MS, In a NOM2 network, a MS may not received pages from a circuit switched domain when engaged in a data call, since the MS is receiving data and is not listening to a paging channel In a NOM3 network, a MS can monitor pages for a circuit switched network while received data and vise versa. "
This means that HTC Titan is not a Class C device...
foxbat121 said:
I don't know how your DVP does it but do a search and you will learn that it is not possible for EDGE connection to serve both voice and data. It could be that you are really connected to 3G but your DVP is reporting EDGE. Or your DVP has two separate radio, one for data, one for voice.
Click to expand...
Click to collapse
drky said:
I am having the same thing happen to, when browsing the web I cannot receive phone call.
Stock rom: OS-7.10.8107.79
Firmware- 1600.2200.20501.401
Radio-16.23.06.10_16.32.00.23U
Boot loader-2.5.160015.3(137079)
Click to expand...
Click to collapse
Your answer here:
http://reviews.cnet.com/8301-19512_7-10115034-233.html
We previously noted that the iPhone may miss calls while sleeping (locked). Some users are now reporting what seems to be a significant issue where their iPhones cannot receive incoming calls while transferring EDGE data. Here, in a nutshell, is what appears to be happening:
The iPhone cannot simultaneously use EDGE and voice services. That is, if you are on a call, you cannot concurrently access EDGE-data functions. In addition, as documented in Knowledge Base article #305711:
"While iPhone is actively transferring data over EDGEâ??downloading a webpage, for exampleâ??you may not be able to receive calls. Incoming calls may go to voicemail."
The "may not be able to receive calls" portion stems from the fact that there are two types of EDGE network types, NOM1 and NOM2. When your iPhone is connected to a NOM1 network, the data transmission will generally be interrupted, and the incoming call allowed to come through. When your iPhone is connected to a NOM2 network, however, the EDGE data transfer process cannot be interrupted, and the call will generally go to voicemail.
Fortunately, there is a way to check whether you are connected to a NOM1 or NOM2 network. First, put your iPhone in field test mode by accessing the Phone application, tapping Keypad, then entering *3001#12345#* and pressing Call.
Tap GPRS Information and look at the entry next to nom. It will be either 1 or 2. If you see a 1, you'll likely be able to receive a call while transferring data. If you see a 2, you likely won't.
Unfortunately, it appears that NOM2 is much more prevalent on AT&T's data network. In fact, we've yet to see our iPhone connect to a NOM1 network. As such, we can't even state with certainty that the iPhone supports NOM1 at all.
"GPRS network 130 can be designed to operate in three network operation modes (NOM1, NOM2 and NOM3). A network operation modes of a GPRS network is indicated by a parameter in system information messages transmitted within a cell. The system information messages dictates a MS where to listen for paging messages and how signal towards the network. The network operation mode represents the capabilities of the GPRS network. In a NOM1 network, a MS can receive pages from a circuit switched domain (voice call) when engaged in a data call. The MS can suspend the data call or take both simultaneously, depending on the ability of the MS, In a NOM2 network, a MS may not received pages from a circuit switched domain when engaged in a data call, since the MS is receiving data and is not listening to a paging channel In a NOM3 network, a MS can monitor pages for a circuit switched network while received data and vise versa. "
zorroz said:
This means that HTC Titan is not a Class C device...
Click to expand...
Click to collapse
As far as I know, there isn't any class C devices on the market. Maybe your DVP is an exception but I highly doubt it.

Tasker profile: Grooveip, AOKP, airplane mode with wifi

Hi guys I am trying to make a reocurring tasker profile with airplane mode (cell disabled) BUT wifi ON. The situation in my house is wifi strength is amazingg and radio signal is pretty much zero.
The purpose of this is to manually set your phone in the network state of airplane mode BUT keep wifi on and still receive all your phone calls and texts as you would on radio. For those of us who have bad signal and don't have particularly long voice calls, this would also save a good bit of battery
When I have airplane mode off (RADIO, with or without wifi) I want to receive calls as I normally would.
One big problem I've come across on my carrier/AOKP roms is that in order for my phone to enable call forwarding to google voice/grooveip I must have my radio enabled and go into the contacts settings to enable the call forwarding manually. As far as I know there isn't an easy way to do this in tasker.
I wanted to know if someone could help devise a tasker profile for this. It's very useful and a lot of people could use it.

Annoying Data Popup Message

Hey everybody,
Does anyone know how to disable annoying popup messages related to Mobil Data while connected to WIFI? Here's the background; I used to be with Verizon and was one of the treasured unlimited data participants until they recently decided to once again screw their most loyal customers with increases on costs. I left VZW and went to Straight Talk utilizing the 4G LTE Verizon network. Before under VZW, I don't remember my wife's phone showing a message that she could not browse the internet, send email, etc, unless connected to data with the exception of using WIFI. Well since switching over to ST, I've created Tasker Profiles which simulate Juice Defender and turn off mobile data as soon as it is connected to our home WIFI. About every two minutes it popups a messages saying the following:
Title Splash:
Mobile data
Message Content:
Unless you use WI-FI, you will no linger be able to use the Internet, Email or other apps that require a data connection.
Turn off the mobile data connection?
I've attached a screenshot of the message.
How can I disable to popup? I'm sure there's a way to do if someone can point me in the right direction.... Thanks
I should also clarify that the popup returns regardless if you select Okay or Cancel. I even enable Data and still returns.
I found this thread which apparently the issue seems to be related to apps that turn off data or turn it on using automation.
http://forum.xda-developers.com/showthread.php?t=2695808

Categories

Resources