[Q] Broken screen, need to activate HDMI - Motorola Droid RAZR

Hello,
My screen doesn't turn on but I was able to HDMI to see what I was doing on my TV. Unfortunately I turned off the "Detect HDMI". It was real stupid. Now the phone doesn't display anything through its HDMI.
Can someone make me screenshot to guide me? I want to try going blindly and check this box again.

Related

[Q] Screen dead on GS4. MHL screen mirroring?

I need to get data off my phone and I am trying to figure out ways to do it short of replacing the screen on it.
It is stock and has a PIN lock screen. When I try hooking it up through Kies it says I need to unlock my phone and apparently whatever steps I need to do I cannot.
I was wondering if I buy an MHL hdmi adapter if it would start mirroring as soon as I plugged it in or if I would need to enable mirroring somewhere in a menu stuck behind the lock screen which I cannot get to?
Anyone have an idea if the MHL adapter starts working immediately when plugged in (mirrors lock screen) or have any other ideas how to get my data off? Thanks.
Bump... I'm sure someone has used MHL HDMI out with this phone?

Android Touch Mode digitizer

Hello all,
I recently bought an Android tv box and I want to put it in my car. I bought also a 7" digitiser and a "digitizer to usb interface from Adafruit named ar1100" that help me to connect via USB the digitiser and the Tv box.
My problem is that I have set up the interface and when I connect to my tv box using USB, it works as a touchpad , not like a touchscreen. This means that I see a cursor and I need to move that cursor like the touchpad from the laptop.. I want to activate the function where the digitiser works as it is designed.
I have read on some forums that is a "Touch mode" function that can be activated but from what I understand, it is made by developers which insert some lines in the source code...
Do you please have any suggestion for me in order to find a solution? Or an .apk that can solve this?
Thank you very much! :crying:

Android Touch Mode digitizer

Hello all,
I recently bought an Android tv box and I want to put it in my car. I bought also a 7" digitiser and a "digitizer to usb interface from Adafruit named ar1100" that help me to connect via USB the digitiser and the Tv box.
My problem is that I have set up the interface and when I connect to my tv box using USB, it works as a touchpad , not like a touchscreen. This means that I see a cursor and I need to move that cursor like the touchpad from the laptop.. I want to activate the function where the digitiser works as it is designed.
I have read on some forums that is a "Touch mode" function that can be activated but from what I understand, it is made by developers which insert some lines in the source code...
Do you please have any suggestion for me in order to find a solution? Or an .apk that can solve this?
Thank you very much! :crying:
Did you ever resolve this? I've connected my Ar1100 to three Android devices and have exactly the same problem.

How to mirror phone screen to laptop (with broken phone screen)

I got a s3 with a broken screen completely shattered, no light, no touch response etc. but the sounds and notification lights work, i can connect with usb as a media device i can access internal sd...
my question is is there any way i can mirror the screen to my computer via usb without doing anything on the phone because as i said the screen completely gone, maybe with adb or something?? i'm interested in how i can control the phone through the pc, like how asus pc link does it, if anyone can give me any pointers on further reading it would be much appreciated... i don't even know if samsung has such a function..
also i would like it if whenever i connect the usb the phone screen would pop up on the pc, are there any tools that do this?
ps: i heard about hdmi adapter but it doesnt let you control or click on the screen right?

Broken screen. Digitiser ok. Access device.

Hi,
I have a BQ Aquaris E6 with a broken screen (only a black screen is shown).
I need to access the device to save some data and, if possible, to control it from a pc in the future.
The mobile seems to react to the digitiser based on the sounds. It looks like that only the display is broken and I could still control the device.
The device still receive notifications from different apps.
WiFi is enabled and it automatically connects to my home WiFi network.
Unfortunately, no developer options were enabled, no USB debug enabled and impossible to use adb solution will work. (If someone told me how to remotely enabled...it would be amazing!)
The only solution I thought was to use the MHL connection to enable the USB debugging options by duplicating the screen and controlling it with a TV when I touch the display.
I bought a MHL-HDMI cable but TV does not react at all after connection. I thought immediate screen duplication would happen but it is not the case...
Could anyone give a feasible solution to access the device?
Thank you very much in advance.
http://www.devicespecifications.com/en/model/c71730e7
According to the spec sheet, it does not appear to support any video out format. With out USB Debugging enabled, there's really nothing else that you could do beyond getting the LCD fixed.
es0tericcha0s said:
According to the spec sheet, it does not appear to support any video out format. With out USB Debugging enabled, there's really nothing else that you could do beyond getting the LCD fixed.
Click to expand...
Click to collapse
First of all, thank you very much for your reply.
I had a look to the link and it is true there is no mention to any video output format. But I know it has MHL connection since other people were able to connect it through the MHL connection to a TV.
There are some websites where the MHL is also mentioned (no way to paste links because I am new...shame...)
Any idea about how could I enable the USB debugging with a working touchscreen but blinded?
Any way to send a piece of code to do it?
Looks like you are right about the MHL. I should have researched further. Not sure if there's a setting on the phone that you might need to do before it outputs the stream. Either way, I do not know of a solution that would work in this situation.
Other than getting a new screen connected to it...
http://www.ebay.com/itm/New-BQ-Aqua...izer-Assembly-IPS5K0750FPC-A1-E-/291693340931

Categories

Resources