Hello all,
I recently bought an Android tv box and I want to put it in my car. I bought also a 7" digitiser and a "digitizer to usb interface from Adafruit named ar1100" that help me to connect via USB the digitiser and the Tv box.
My problem is that I have set up the interface and when I connect to my tv box using USB, it works as a touchpad , not like a touchscreen. This means that I see a cursor and I need to move that cursor like the touchpad from the laptop.. I want to activate the function where the digitiser works as it is designed.
I have read on some forums that is a "Touch mode" function that can be activated but from what I understand, it is made by developers which insert some lines in the source code...
Do you please have any suggestion for me in order to find a solution? Or an .apk that can solve this?
Thank you very much! :crying:
Did you ever resolve this? I've connected my Ar1100 to three Android devices and have exactly the same problem.
Related
I have a Lenovo IdeaTab S6000 and I recently purchased the Red Samurai/GameStop V2 branded Bluetooth controller and I'm finding that when I connect the controller, a mouse cursor appears on screen that can be semi-controlled via the analog sticks. This essentially causes none of the compatible games for the controller to improperly function. Within my tablets setting menu is an option to change a mouse's cursor speed (something not present on my HTC One, which the controller works perfectly on) and I was wondering if this option could be a factor in the overall problem and if disabling this option is possible. I have spent the past two days trying to remedie this problem and have had no luck so any kind of support would be greatly appreciated.
Also, this being my first post, I apologize in advance if this was posted in the wrong area.
widower said:
I have a Lenovo IdeaTab S6000 and I recently purchased the Red Samurai/GameStop V2 branded Bluetooth controller and I'm finding that when I connect the controller, a mouse cursor appears on screen that can be semi-controlled via the analog sticks. This essentially causes none of the compatible games for the controller to improperly function. Within my tablets setting menu is an option to change a mouse's cursor speed (something not present on my HTC One, which the controller works perfectly on) and I was wondering if this option could be a factor in the overall problem and if disabling this option is possible. I have spent the past two days trying to remedie this problem and have had no luck so any kind of support would be greatly appreciated.
Also, this being my first post, I apologize in advance if this was posted in the wrong area.
Click to expand...
Click to collapse
I too would like some help with this. Exact same scenario.
ixiduffixi said:
I too would like some help with this. Exact same scenario.
Click to expand...
Click to collapse
Necroposting, but I figured I'd add to the conversation:
The only gamepad that I've gotten to work with this device (as a gamepad) is the Moga Hero. Connecting was always finicky at best and would require a full reboot, and immediately connect when it powers up. Otherwise it wouldn't pair at all.
I've tried the Red Samurai v2, the Nyko Playpad, and most recently the Mad Catz C.T.R.L.R. Invariably, the mouse mode works and works very well, but the gamepad mode always does what was written above.
In trying the xbox 360 gamepad, it blinks but doesn't connect.
As a lark, I purchased a Asus MeMo 7" HD tablet which has the same MediaTek chipset (8125) and the same exact problem exists with that device too (mouse mode works, no gamepad). Both the Memo and the Lenovo tabs are on the same version of Android (4.2.2) and the same kernel (3.4.5) on the stock rom. I assume it's Mediatek's fault, in which case HID gamepads are a no go on these devices.
Unless someone has other information, which would be much appreciated.
Oh, wanted to add something: when the C.T.R.L.R. connects in gamepad mode, you get only a cursor. When I connect my bluetooth keyboard, the multimedia controls start working. Not sure why that is.
I don't know if anybody can help me with this problem but I'd appreciate if anybody could, as I have 2 Asus HD7 Memopad (ME173x) tablets running identical to each other, same settings, same software, etc. I have a powered hub in an OTG cable connected to one of my tablets. When I hookup my Canon point and shoot digital camera to the hub, one of the tablets sees it acknowledges it pops up a window saying what program should I use for this USB device either Asus Gallery or the Asus studio or the Google camera importer, and everything works fine.
I unplugged the OTG cable from that tablet and plug it into my other tablet and I get nothing what so ever, nothing pops up. but I know its not a problem with the USB port on that second tablet because when I plug in a flash drive into it and load up the OTG helper I can see the flash drive with no problem using ES file manager. I just can't seem to get the camera to read on that tablet.
so I plug the OTG cable back into the other tablet and boom it pops up the pop up again and it works. I compared settings on both tablets and they're all the same settings identical. I don't remember what I did if I did anything to the first tablet to make it work.I think I just plugged it in and it worked.
I appreciate any help somebody can give me to figure out why the second tablet is doing this? If I have a setting that I need to do I like to know what it is or maybe I forgot a step that I did on the first one I can't remember thank you for your help I appreciate it.
Dog
Dog Rox said:
I don't know if anybody can help me with this problem but I'd appreciate if anybody could, as I have 2 Asus HD7 Memopad (ME173x) tablets running identical to each other, same settings, same software, etc. I have a powered hub in an OTG cable connected to one of my tablets. When I hookup my Canon point and shoot digital camera to the hub, one of the tablets sees it acknowledges it pops up a window saying what program should I use for this USB device either Asus Gallery or the Asus studio or the Google camera importer, and everything works fine.
I unplugged the OTG cable from that tablet and plug it into my other tablet and I get nothing what so ever, nothing pops up. but I know its not a problem with the USB port on that second tablet because when I plug in a flash drive into it and load up the OTG helper I can see the flash drive with no problem using ES file manager. I just can't seem to get the camera to read on that tablet.
so I plug the OTG cable back into the other tablet and boom it pops up the pop up again and it works. I compared settings on both tablets and they're all the same settings identical. I don't remember what I did if I did anything to the first tablet to make it work.I think I just plugged it in and it worked.
I appreciate any help somebody can give me to figure out why the second tablet is doing this? If I have a setting that I need to do I like to know what it is or maybe I forgot a step that I did on the first one I can't remember thank you for your help I appreciate it.
Dog
Click to expand...
Click to collapse
Problem solved, problem solved! I solved the problem, problem solved! haha
I ran the app called USB host diagnostics on the the second tablet that was giving me the problem. It fixed the problem I then looked at the first tablet as I seen the program looked familiar. It was already installed on the first tablet and I remember running it before and well as you know both tablets are working.
Hello all,
I recently bought an Android tv box and I want to put it in my car. I bought also a 7" digitiser and a "digitizer to usb interface from Adafruit named ar1100" that help me to connect via USB the digitiser and the Tv box.
My problem is that I have set up the interface and when I connect to my tv box using USB, it works as a touchpad , not like a touchscreen. This means that I see a cursor and I need to move that cursor like the touchpad from the laptop.. I want to activate the function where the digitiser works as it is designed.
I have read on some forums that is a "Touch mode" function that can be activated but from what I understand, it is made by developers which insert some lines in the source code...
Do you please have any suggestion for me in order to find a solution? Or an .apk that can solve this?
Thank you very much! :crying:
Hi,
I have a BQ Aquaris E6 with a broken screen (only a black screen is shown).
I need to access the device to save some data and, if possible, to control it from a pc in the future.
The mobile seems to react to the digitiser based on the sounds. It looks like that only the display is broken and I could still control the device.
The device still receive notifications from different apps.
WiFi is enabled and it automatically connects to my home WiFi network.
Unfortunately, no developer options were enabled, no USB debug enabled and impossible to use adb solution will work. (If someone told me how to remotely enabled...it would be amazing!)
The only solution I thought was to use the MHL connection to enable the USB debugging options by duplicating the screen and controlling it with a TV when I touch the display.
I bought a MHL-HDMI cable but TV does not react at all after connection. I thought immediate screen duplication would happen but it is not the case...
Could anyone give a feasible solution to access the device?
Thank you very much in advance.
http://www.devicespecifications.com/en/model/c71730e7
According to the spec sheet, it does not appear to support any video out format. With out USB Debugging enabled, there's really nothing else that you could do beyond getting the LCD fixed.
es0tericcha0s said:
According to the spec sheet, it does not appear to support any video out format. With out USB Debugging enabled, there's really nothing else that you could do beyond getting the LCD fixed.
Click to expand...
Click to collapse
First of all, thank you very much for your reply.
I had a look to the link and it is true there is no mention to any video output format. But I know it has MHL connection since other people were able to connect it through the MHL connection to a TV.
There are some websites where the MHL is also mentioned (no way to paste links because I am new...shame...)
Any idea about how could I enable the USB debugging with a working touchscreen but blinded?
Any way to send a piece of code to do it?
Looks like you are right about the MHL. I should have researched further. Not sure if there's a setting on the phone that you might need to do before it outputs the stream. Either way, I do not know of a solution that would work in this situation.
Other than getting a new screen connected to it...
http://www.ebay.com/itm/New-BQ-Aqua...izer-Assembly-IPS5K0750FPC-A1-E-/291693340931
Hello so basically while using a Bluetooth mouse on android (not using the phone as a mouse) but connecting a Bluetooth mouse to my phone, it does not register "clicks" well it does but it doesn't basically it will work selecting apps and everything but once in a app the "click" no longer registers.
I've turned on "show touches" and when I click I notice that a "click" isn't there at all although when enabling "pointer location" from developer options when clicking it responds so it knows the mouses exact location ect but does not physically "click/touch"
My question is can anybody help solve this?? Would be really thankful.
Also if you ask why I need a mouse pointer on my phone I don't but what I want it for is my TV, I have a new Sony 4K TV with android as its software, and I have gotten some apps on it I would like to use and they boot up fine issue is after connecting mouse to TV I cannot select anything once inside an app, I've been using my phone to try and figure it out as once I've done it on here can simply recreate that on my TV as is the same platform. Anyway any help would be highly appreciated.
Regards, Bradley.