hi.I used SP Flash Tool to flash my phone with the wrong ROM and now its DEAD.It won't turn on.it won't charge and still PC detection as Mtk Usb Port.
I have another same device.i get backup of stock ROM with Mtk Droid Tool.(i know backup files work.recovery file with scatter flashed sucsesfully when i install cwm recovery on new device)
i can format whole flash with SPFT and get green circle.
then try to download,but this errors appeared.
with SP FLASH TOOL 3.1224.01 : S_DL_GET_SETTING_FAIL (5054)
with SP FLASH TOOL 3.1304.0.119 :S_DA_DRAM_NOT_SUPORT (3004)
i see this error too : booloader doesnt exist on nand flash.please download bootloader first!
i think its bootloader problem so maybe testpoint method works.problem is i dont know which one is TP and how can i use it.
cpu : mtk6517(6577)
ram:512
android :4.0.4
http://www.apanda.com.cn/a60t/
anyone.please help
Related
I am trying to flash a modified boot image to my Micromax A25 which is based on Mediatek MT6575, with SP FLASH TOOL. After I have loaded the scatter file and the boot image to SP tool, I clicked on DOWNLOAD and then connected the phone to the usb cable. But I get an error measage saying that BROM START COMMAND CANNOT BE PASSED OVER USB. What could I be doing wrong? Somebody help me! If possible tell me about any other method through which I could flash boot.img to my unrooted MT6575 device.
I have just received my Iocean X7 Elite and was about to install a new rom. I had successfully rooted the device and then was trying to flash
the recovery with SP Flash Tool.
After the recovery flashed my phone refuses to turn on I believe its somehow bricked but have no idea how this could have happened. I did
format flash i only downloaded the recovery to the device.
In Device Manager when i plug the phone it it either shows up as 'DA USB VCOM Port' or 'MTK USB Port'.
When I try to use SP Tool to flash the stock Rom back onto the device I get an error saying 'BROM ERROR : S_FT_ENABLE_DRAM_FAIL(4032)'
I have no idea what to do next can someone help me.
I have tried what this thread suggests:
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNEx-tkoU1eacV3YJWSk3s0DdY0eAQ
guys i brickd my phone gionee p2(mtk6572) i mek i backup using mtk droid tools and it was succesful but after i brickd my phone i tried to restore it usin sp flash tool but the computer s not recognyzing my device i tried gionee usbn driver but wen i click install windows says its does not support this type of installation....and wen i open sp flash tools and click on scatter loading and select the scatter.txt file sp flash tools pop up sayin that i shoud check the scatter file if is illegal.....help me please i need drivers that will make the sp flash tool flash my phone help me please
Hello guys, I have a HiSense U970 with the MT6589 chipset which got hard bricked a week ago. The phone is running a stock 4.2.1 JB and rooted. The problem is that whenever I try to flash anything using SP Flash Tool it shows this error:
BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed
I am hopeful the phone isn't totally dead since it can be:
- Detected by the computer WITHOUT the battery while holding vol down
- In Device Manager, it would show MTK USB Port (ComX) under Ports when vol down is held.
This is what happens now:
- Charging does not do anything.
- Cannot boot into recovery
- Cannot be detected by MTK Droid Tools (but I think this app needs a powered up phone to be detected by its system)
- Cannot flash anything using SPFT v3.1320.0.174 and v5.1524.00
I have searched the internet for fixes and solutions but, everything that I have found leads to that error.
Here was what I had done before the problem arose.
- Installed Preloader driver
- Used the latest version of SPFT
- Formatted whole flash except bootloader as I cannot flash the cwm rom found here without formatting
- Flashed ONLY the recovery and then downloaded it.
Green circle appears and after that, it cannot boot anymore. Cannot charge. Cannot boot into recovery.
I have tried the following with no luck:
- Used SPFT v5.1524.00 and v3.1320.0.174
- Flashing only the preloader
- Flashing only the recovery
- Format whole flash
- Formatting whole flash except bootloader
- Format all + download (v5)
- Firmware upgrade + upgrade (v3)
- Using the write memory method for writing preloader
- Flashing stock preloader
- Doing a memory test
All of which goes to the error 4032.
I have also tried using different USB ports with the same results.
If it helps, I used the scatter file for MT6589 and not my own scatter file. Using my own scatter file does not do anything before I flashed the recovery rom so, I used the MT6589 scatter file instead. Also, my scatter file was different from the MT6589.
- This was the scatter file I used.
- And this is my log from MTK Droid Tools which hopefully contains the addresses for the scatter file (I accidentally replaced my own [yea i know, stupid me])
I also cannot find the same scatter file that I had created anywhere on the internet.
I am willing to supply you with anything as long as I have access to it (hoping I have the file/information you need:fingers-crossed.
I am hoping that you know or at least the very least, can guide me out of mine and others misery. Thank you. :fingers-crossed:
My phone xtouch PF73 gives me this message "decrypt error, boot failed" after i tried flashing it.
I have tried two more ROMS but with those i get the "S_NOT_ENOUGH_STORAGE(1011) error message in both SP Flash tool and WiseLink Tool"
Android version: 4.22
MTK platform : MT6572
I used
SP Flash Tool v5.1352.01
SP Flash Tool v5.1628
wise tool v4.6.0.44
How can i fix it?
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
nyado said:
hi i also have alcatel 4035D im trying to load firmware using sp tool but its giving me an error 1011, i have tried different firmwares
Click to expand...
Click to collapse
Reason:
The firmware(s) you are trying to flash to your MTK device is larger than the available space allocated for the firmware in the phone’s storage space.
Possible fix ( was not tested by me ):
Click on the Format Tab
Select/tick Format whole Flash and click the Start button before connecting your device.
Once the formatting is done, go to the Download Tab and select just the Preloader file first and flash it.
After the preloader.bin has been successfully flashed to your device, tick the rest of the firmware files and flash as well.