Related
hello fellow xdas
while back i had gotten my hands dirty with the CM10 project as i just couldn't wait for the official update! i learned quickly that i had serious problems with antenna/reception. i tried carious base bands (as recommended on forums) using GetRil/flash.Odin. this didnt seem to help, even though i would get better reception, my signal was unstable. In the process i tried other roms like JellyBam and had the same issue.
As this is my main phone and i do actually need to call with it, i went back to the stock rom i downloaded. but surprisingly i still have the same issue! GetRil also shows that i have incompatible RIL/baseband. this is what it shows:
RIL: I9100NELP2; I9100XXKI4
Baseband: I9100XXLPQ
FYI: i am located in the Netherlands and use T-mobile network.
so have i installed the wrong ROM or done something wrong in the process... ? does anyone have any experience with this? i much rather have CM10 but only if i can get to call normally once again?
thanks
ozeeo said:
hello fellow xdas
while back i had gotten my hands dirty with the CM10 project as i just couldn't wait for the official update! i learned quickly that i had serious problems with antenna/reception. i tried carious base bands (as recommended on forums) using GetRil/flash.Odin. this didnt seem to help, even though i would get better reception, my signal was unstable. In the process i tried other roms like JellyBam and had the same issue.
As this is my main phone and i do actually need to call with it, i went back to the stock rom i downloaded. but surprisingly i still have the same issue! GetRil also shows that i have incompatible RIL/baseband. this is what it shows:
RIL: I9100NELP2; I9100XXKI4
Baseband: I9100XXLPQ
FYI: i am located in the Netherlands and use T-mobile network.
so have i installed the wrong ROM or done something wrong in the process... ? does anyone have any experience with this? i much rather have CM10 but only if i can get to call normally once again?
thanks
Click to expand...
Click to collapse
Use either of the 2 links below to download either the NELP2 modem of the XXKI4 modem, and them flash them onto your phone via Recovery Mode. That should resolved your incompatible RIL issue.
[REF] Modem+RIL CWM Installers
[REF] Galaxy S 2 Shipped Modem Collection
---------- Post added at 11:55 AM ---------- Previous post was at 11:46 AM ----------
OR .... use the link below to find and reflash the entire correct firmware for your region, which should flash the correct modem and RIL along with it.
[ROM+Guide] Official i9100 Firmwares LPE/Q/7/2/F/S/4/7/G/9/W/D/F Download
zee54 said:
Use either of the 2 links below to download either the NELP2 modem of the XXKI4 modem, and them flash them onto your phone via Recovery Mode. That should resolved your incompatible RIL issue.
[REF] Modem+RIL CWM Installers
[REF] Galaxy S 2 Shipped Modem Collection
---------- Post added at 11:55 AM ---------- Previous post was at 11:46 AM ----------
OR .... use the link below to find and reflash the entire correct firmware for your region, which should flash the correct modem and RIL along with it.
[ROM+Guide] Official i9100 Firmwares LPE/Q/7/2/F/S/4/7/G/9/W/D/F Download
Click to expand...
Click to collapse
thanks a lot zee54,
can i just go back to my CM10 or JellyBam, install the above mentioned radios and get everything working? or does it depend on the RIL which that ROM is running! I have tried a number of modems when i had CM10, but dont know if i tried those... i did try BVLP7 for sure
Based on this forum right here i need to have the I9100BOLPD ROM as stock for Netherlands T Mobile!
ozeeo said:
thanks a lot zee54,
can i just go back to my CM10 or JellyBam, install the above mentioned radios and get everything working? or does it depend on the RIL which that ROM is running! I have tried a number of modems when i had CM10, but dont know if i tried those... i did try BVLP7 for sure
Based on this forum right here i need to have the I9100BOLPD ROM as stock for Netherlands T Mobile!
Click to expand...
Click to collapse
The modem is independent of the ROM, mate. So it wont make much of a difference whether you install the radio on stock firmware or on CM10. You could try using the modems mentioned by zee54 with CM10 and seeing if it helps. Also, give it about a day or so..since the phone tends to take a while to get 'used' to a new modem.
ozeeo said:
thanks a lot zee54,
can i just go back to my CM10 or JellyBam, install the above mentioned radios and get everything working? or does it depend on the RIL which that ROM is running! I have tried a number of modems when i had CM10, but dont know if i tried those... i did try BVLP7 for sure
Based on this forum right here i need to have the I9100BOLPD ROM as stock for Netherlands T Mobile!
Click to expand...
Click to collapse
The unstable signal or "RIL Crash" as it it called isn't actually caused by having an incompatible RIL and Baseband (modem). It is a more complicated issue which I don't fully understand myself. But what I do know is that it currently affects all customs roms that are based on CM10 and use the CM Kernel. So switching modems might help recude the frequency of the problem but probably won't irradicate it completely.
You should not experiencing this problem if you go back to stock samsung firmware. If you experience problems you might want to do a full wipe (Data, Cache, Dalvic-cache) before reflashing and fix permissions afterwards.
On a more positive note, I have found that using the Siyah Kernel with your custom rom does seem to eliminate this problem, or at least reduce it occurance to such that I have not noticed it happening.
So personally i would suggest that if you wish to go back to CM10 or JellyBam ROMs, then do so but also install the latest Siyah Kernel for the S2 from here http://www.gokhanmoral.com/
(Here's the XDA Thread for the Siyah Kernel - [KERNEL] SiyahKernel v4.1.5 (v5.0a2))
I am currently running CM10 with the Siyah Kernel v5.0b2 and it is working very nicely
great stuff guys... 2x thanks for both of you!
Zeey54, i just had Siyah v5 Kernal installed, installing the latest JellyBam right now! so lets see what happens. i was suspecting that beside the RIL/baseband there were other factors as i did not see any significant difference between them. but then again i dont trust my judgement on such issues as my knowledge is quite limited.
will send an update with the result after installation in a few min.
ozeeo said:
great stuff guys... 2x thanks for both of you!
Zeey54, i just had Siyah v5 Kernal installed, installing the latest JellyBam right now! so lets see what happens. i was suspecting that beside the RIL/baseband there were other factors as i did not see any significant difference between them. but then again i dont trust my judgement on such issues as my knowledge is quite limited.
will send an update with the result after installation in a few min.
Click to expand...
Click to collapse
Good luck mate. I hope it all goes well
zee54 said:
Good luck mate. I hope it all goes well
Click to expand...
Click to collapse
installed the BOLP7 modem, overall reception is much better! data connectivity is also better and faster. but i still have some periods which my receptions drops and goes back up, seems like radio/modem crash (if im right). dont know if that is due to the kernel or modem or ...?
the reason i went for BOLP7 modem was because the latest official stock rom from t-mobile Netherlands was I9100BOLPM_I9100TNLLP8_I9100BOLP7, so i thought that would be the best one to try!
will wait a little more to see if this improves as the modem settles.
4th official ROM too much coverage you please make a review ?
need modem
First of all, thank you mate for your hardwork and awesome utility.
I have a Samsung galaxy S2 I9100G , recently flashed jelly bam custom rom. I am based in Saudi Arabia, the reception is not clear and people complain that it is switched off or out of network. I tried calling with another mobile and i got a response that my mobile is switched off, at the same time i checked my S2 mobile , it shows the full signal of the network in status bar.
what should i do? Which modem should i flash. the getRIL shows RIL/baseband is matching (I9100GDDLP5).
cheers
Rizwan
I randomly miss some short messages sent to me. These are sent by different senders and problems occurs almost everyday.
My operator says everything is ok and according to their logs all the messages have been sent to my phone. I have sometimes tested this by myself sending a message from another telephone. Sometimes a reboot of the device will help for a while, sometimes another test of sending comes through.
This is annoying and frustrating because you can't be sure if someone has sent you something and all this happens randomly.
I'm currenlty using Samsung Galaxy SIII I9300 with Omega Rom v.45. I noticed this problem with the previous version v.44.x.
Any ideas what may cause this? Do I have to blame the ROM or my operator or my phone?
terppa78 said:
I randomly miss some short messages sent to me. These are sent by different senders and problems occurs almost everyday.
My operator says everything is ok and according to their logs all the messages have been sent to my phone. I have sometimes tested this by myself sending a message from another telephone. Sometimes a reboot of the device will help for a while, sometimes another test of sending comes through.
This is annoying and frustrating because you can't be sure if someone has sent you something and all this happens randomly.
I'm currenlty using Samsung Galaxy SIII I9300 with Omega Rom v.45. I noticed this problem with the previous version v.44.x.
Any ideas what may cause this? Do I have to blame the ROM or my operator or my phone?
Click to expand...
Click to collapse
Is it based on a leak?
Flash a ROM based on an official release and do a factory reset. if that doesn't resolve the issue, probably a network issue - although if yo0u're using a leak, it's not unexpected to find major bugs
rootSU said:
Is it based on a leak?
Flash a ROM based on an official release and do a factory reset. if that doesn't resolve the issue, probably a network issue - although if yo0u're using a leak, it's not unexpected to find major bugs
Click to expand...
Click to collapse
Flash a ROM based on an official release and do a factory reset. if that doesn't resolve the issue, probably a network issue - although if yo0u're using a leak, it's not unexpected to find major bugs[/QUOTE]
What do you mean by "Is it base on a leak"? I have downloaded the ROM from Omega's official donwload center (Omega I9300 XXUFME3 v45.1 JB 4.2.2, torrent-version), rebooted the phone in to the recovery-mode and installed the ROM with "Full wipe"
Any suggestions for an official based ROM?
terppa78 said:
Flash a ROM based on an official release and do a factory reset. if that doesn't resolve the issue, probably a network issue - although if yo0u're using a leak, it's not unexpected to find major bugs
Click to expand...
Click to collapse
What do you mean by "Is it base on a leak"? I have downloaded the ROM from Omega's official donwload center (Omega I9300 XXUFME3 v45.1 JB 4.2.2, torrent-version), rebooted the phone in to the recovery-mode and installed the ROM with "Full wipe"
Any suggestions for an official based ROM?[/QUOTE]
IT IS BASED ON A LEAK read the rom description .
SMS is a well posted problem .
Use a rom based on 4.1.2 if you don't want to use leaked test beta firmware 4.2.2
jje
Ok, thanks for your replies!
same issue
I also had the same issue.
I'm also using Omega with stable release.
I notice the problem appear when I did a nandroid restore or same problem when I update rom without full wipe.
I was able to receive the missing sms with Ghost SMS.
terppa78 said:
Ok, thanks for your replies!
Click to expand...
Click to collapse
hit "thanks" to thank them
Hello! I have currently installed slimbean build 8 sabermod unoffical (4.2.2) by fusionjack. Everything is working very smoothly and nice, but I cant send text messages (only recive)....
I was therefore wondering if the baseband was the problem? The baseband is xxsw, but I Live in Norway (one of the nordic countries) and shouldn't I use a baseband with xw** like on neatrom lite?
And how do I find one of these basebands?
BTW I have used neatrom lite (xxms2) and I can send sms there..
Would be very pleased with any answers!
Norside said:
Hello! I have currently installed slimbean build 8 sabermod unoffical (4.2.2) by fusionjack. Everything is working very smoothly and nice, but I cant send text messages (only recive)....
I was therefore wondering if the baseband was the problem? The baseband is xxsw, but I Live in Norway (one of the nordic countries) and shouldn't I use a baseband with xw** like on neatrom lite?
And how do I find one of these basebands?
BTW I have used neatrom lite (xxms2) and I can send sms there..
Would be very pleased with any answers!
Click to expand...
Click to collapse
Try searching for XXMS2 modem online.If that doesn't works,Do a Factory reset or change ROM
Same here,
I have tried factory reset tried flashing latest modems and tried 4.2 and 4.3 ROMS. still messages are not getting sent . Can only receive it.
Please help
1) Maybe your SIM is faulty. Try to insert it in a different phone and send sms. If it doesn't send - the SIM is the cause.
2) Try to send sms on official CM compile. See if it works out. I recommend CM 10.1.3 stable.
3) You could have a modem-ril mismatch. Flash LS8 and using GetRIL from the play store install the correct ril for LS8.
f-r said:
1) Maybe your SIM is faulty. Try to insert it in a different phone and send sms. If it doesn't send - the SIM is the cause.
2) Try to send sms on official CM compile. See if it works out. I recommend CM 10.1.3 stable.
3) You could have a modem-ril mismatch. Flash LS8 and using GetRIL from the play store install the correct ril for LS8.
Click to expand...
Click to collapse
Don't mess with ril!!! The base of the rom is openril!! Ull end up with lot more problems than u have now, also getril is outdated!
Sent from my GT-I9100 using xda app-developers app
Maniac9331 said:
Don't mess with ril!!! The base of the rom is openril!! Ull end up with lot more problems than u have now, also getril is outdated!
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Maniac9331,
Thanks for enlightening me about this. As it turned out I was unknowingly using a fake RIL for some time now....
You learn something new every day....
Anyway, lucky I had an old RIL backup that I've made after rooting for the first time.
I've flashed it and voila! I have my old RIL now. Thanks, Maniac9331!
Glad i could helpe you..
Cheers!!
Sent from my GT-I9100 using xda app-developers app
Hi and Merry Christmas everyone.
I have a little problem I am hoping that you might be able to help with.
Little history - this phone was stock until today because Samsung update killed the phone (everything was FC, and reflash, format etc, didn't fix it! Damn you Samsung for ****ty build!!)
Anyway - this is the fifth phone I have Rooted and Flashed to custom ROM - so I kinda know what I am doing, but this one has stumped me a little (wasn't doing this one because I used for Work, and it was under Warranty - out of warranty now anyway, so.... just forced my hand to root/upload custom ROM it)
Every Time I do a new ROM install I wipe the Data/Factory Reset, Wipe Cache, Wipe Dalvik Cache, Backup EFS folder, and Format System (this is the way I did it with all my phones, and the way I was taught to get really stable working ROM).
I am in New Zealand with an GT-I9300 (nice Red Brand) - brought from DickSmith, Unlocked.
The problem I have is that when I install a custom ROM from here (so far I have tried three), I keep getting the "Emergency Calls Only" issue and the Phone won't manually connect to my phone carrier (New Zealand - 2Degrees).
What I have done to look over the issue so far is:
1) Installed Recovery cwmtouch-6.0.3.2
2) Installed CM10 Final cm-10.2.0-i9300 - tested to make sure phone was working okay based on CM10, worked fine - can make calls, and stock CM10 working perfect. The Baseband Driver is 1930BUUGMJ3, and the IMEI is 3539********** (so everything okay there)
Build number: cm_i9300-userdebug 4.3.1 JLS36I dfd0cbed2d test-keys
*#1234#
Doesn't work on CM10.... Dialer Codes don't work on CM10 - blah!
3) Installed S4 Revolution v11 ROM. Since this was already using 1930BUUGMJ3, I didn't flash the MG4 that's included in the ROM installer. Everything working as expected, however I am always getting Emergency Calls Only. Confirmed Baseband Driver is 1930BUUGMJ3 and the IMEI is 3539********** (so I would think everything okay... but no - will not connect to my New Zealand Carrier).
*#1234#
AP: i9300XXUGMJ9
CP: i9300BUUGMJ3
CSC: unknown
4) Re-flashed this ROM, and this time replaced the modem driver with the MG4. Again all working fine, but still no Carrier connection.
5) I installed the ROM Android_Revolution_HD-SGS3_40.0 - it replaced the Baseband Driver with the 1930BUUGMJ3 again, and the IMEI is 3539********** (again no change), and once again this didn't work.
*#1234#
AP: i9300XXUGMJ9
CP: i9300BUUGMJ3
CSC: i9300OXAEMC2
6) Rebuild back to CM10 - everything working again.
The one thing I am noticing (not sure if this is the problem - but just adding the differences I see) when I use the IMEI check (*#06#) with this ROM (and Revolution) I notice that the IMEI SV is showing (/11) at the end of it - So it is 3539*********** / 11. However, with CM10, it isn't so is only 3539***********
(however, when I look at Status - it has the IMEI showing without the IMEI SV, and the IMEI SV shows in the IMEI SV row).
So this probably isn't the issue either.
Serial Number is the Same also - so that hasn't changed.
The Device Status is Custom for CM10 and this ROM - so nothing changed there either.
So I am a bit stuck now, I don't know where else to go - because I was going to manually update the Modem, but, I don't think that is the problem since the Driver seems to work okay with CM10. And more importantly, I am a little worried about just flashing random stuff on the phone without having some clear understanding on what I am flashing. So don't want to just flash for the hell of flashing - so if someone has some guidance that would be helpful.
Can anyone else give me some ideas on this?
Might try ariza or modems patched zuluman http://forum.xda-developers.com/showthread.php?t=1918601
mojonx0droid said:
Might try ariza or modems patched zuluman http://forum.xda-developers.com/showthread.php?t=1918601
Click to expand...
Click to collapse
Hi
Thanks fr the suggestion however I am not really sure if this is the right thing to be using based on what I have stated - for example, the version of ROMS I have already tried flashing.
I read over in [REF] IMEI / EFS - Know this stuff (i9300) - including "no network" about this (http://forum.xda-developers.com/showthread.php?t=2393289) which stated the following
How does "Ariza patch" fit in to this?
Ariza patch does not fix IMEI issues. It fixes "00000" Serial number issues, which has similar symptoms. This patch does not work on EFS v2 ROMs. If you use it, you may irreparably break your phone.
Also it would seem, Phones that had this patch ON EFS v1 ROMS will break their IMEI if they upgrade to EFS v2 ROMS.
As yet, there is nothing proved to resolve this issue fully. Search the Ariza thread for posts by zuluman for potential fixes. This Page is hopefully the most useful or one of the patched modems posted
It would probably be best to get the serial number professionally restored either under warranty or by sla mobile repair shop. The Ariza patch was always only fixing something that should have been fixed under warranty anyway.... now we are seeing this issue - cut your losses
Click to expand...
Click to collapse
My Serial number hasn't gone to 0000. It is different to the serial number that CM10 uses... but it isn't 0000.
My understanding is that CM10, and the ROMS I have tried are EFS V2 ROMS (since they use the new Modem Driver). Therefore this could possible make things worse?
serious a problem If you conducted a downgrade. the CM rom not change the modem, maybe that's why after I install a CM even you have signal. maybe your problem is you do not sign up with any modem or modem change causes something weird that makes you lose the signal.
Goldendawn said:
Hi
Thanks fr the suggestion however I am not really sure if this is the right thing to be using based on what I have stated - for example, the version of ROMS I have already tried flashing.
I read over in [REF] IMEI / EFS - Know this stuff (i9300) - including "no network" about this (http://forum.xda-developers.com/showthread.php?t=2393289) which stated the following
My Serial number hasn't gone to 0000. It is different to the serial number that CM10 uses... but it isn't 0000.
My understanding is that CM10, and the ROMS I have tried are EFS V2 ROMS (since they use the new Modem Driver). Therefore this could possible make things worse?
Click to expand...
Click to collapse
All AOSP roms are all efs v1 roms not v2!!! Only Sammy 4.3 and above roms are efs v2!
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
All AOSP roms are all efs v1 roms not v2!!! Only Sammy 4.3 and above roms are efs v2!
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
JellyYogurt: Sorry I am confused then, because people were stating in many threads that some people have possible screwed up their EFS - and my understanding is that the new Modem is what upgrades the EFS not the ROM. (also not sure why there was !!!! not sure it was required, since I am asking for help in the HELP and TROUBLESHOOTING section of this forum)
I might be wrong, but this is kinda what I am reading on the threads in the ROMs about people who are having No Network issues also.
I have tried to use that plugin however it doesn't work (always downloading) so I am going to look for the patch they are talking about and try to run that.
mojonx0droid: I haven't done a downgrade - I have used CM10, and that has worked fine. Then I tried the two roms I have suggested, and both have had the same issue where it won't find the network anymore. I can revert back to CM10 and it works fine again.
Also not sure what you mean by Signing up to any modem changes? As stated, my Modem appears to have updated already, and I have also tried using the Modem's that are included in the ROMs supplied.
CM10 is working fine, it is only the ROMs I have tried on here which are having the issues.
JellyYogurt said:
All AOSP roms are all efs v1 roms not v2!!! Only Sammy 4.3 and above roms are efs v2!
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
Hey mate,
Are your really certain with that? I have a similar problem, messed up my EFS partition and lost my EFSv1 Backup files, but at least I could successfully restore the EFSv2 files. Unfortunately I did not Backup my i9300's original EFS state.
Now I cannot unlock the SIM card anymore when running AOSP-based roms und when booting with no SIM card inside there's a strange serial number.
A few days ago I was starting to think if AOSP-based roms aren't compatible with EFSv2 (yet?). It would be good to know if this actually is the problem.
You don't know a way to convert EFSv2 files back to EFSv1, do you?
Greetz
// j_dee
Sent by XDA app from my Samsung Galaxie S3
j_dee said:
Hey mate,
Are your really certain with that? I have a similar problem, messed up my EFS partition and lost my EFSv1 Backup files, but at least I could successfully restore the EFSv2 files. Unfortunately I did not Backup my i9300's original EFS state.
Now I cannot unlock the SIM card anymore when running AOSP-based roms und when booting with no SIM card inside there's a strange serial number.
A few days ago I was starting to think if AOSP-based roms aren't compatible with EFSv2 (yet?). It would be good to know if this actually is the problem.
You don't know a way to convert EFSv2 files back to EFSv1, do you?
Greetz
// j_dee
Sent by XDA app from my Samsung Galaxie S3
Click to expand...
Click to collapse
As i said. All aosp are using efs v1. Efs v1 are only compatible with efs v1. Sammy 4.3 roms onwards are efs v2 and is compatible with BOTH v1 and v2. I dun think u can actually convert it though.
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
As i said. All aosp are using efs v1. Efs v1 are only compatible with efs v1. Sammy 4.3 roms onwards are efs v2 and is compatible with BOTH v1 and v2. I dun think u can actually convert it though.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
In fact I think you have just hit my problem....
As stated the whole reason I have gone custom ROM is due to the fact that Samsung update failed to update on my phone (flashed okay, but all applications afterwards were giving FC, including TouchWiz, etc, etc. Did factory resets, the works, but nothing worked.)
However, after that CM10 worked fine, but everything here hasn't worked so far.
Could it be ... maybe. that the original Samsung update upgraded the EFS to V2.
Is there a way for me to tell if EFS is on V2 or V1?
If it is V2 - then I know the problem, and then I will just have to use Custom Roms which support V2 (which my understanding is CM10 and CM11 - but I might be wrong).
Goldendawn said:
In fact I think you have just hit my problem....
As stated the whole reason I have gone custom ROM is due to the fact that Samsung update failed to update on my phone (flashed okay, but all applications afterwards were giving FC, including TouchWiz, etc, etc. Did factory resets, the works, but nothing worked.)
However, after that CM10 worked fine, but everything here hasn't worked so far.
Could it be ... maybe. that the original Samsung update upgraded the EFS to V2.
Is there a way for me to tell if EFS is on V2 or V1?
If it is V2 - then I know the problem, and then I will just have to use Custom Roms which support V2 (which my understanding is CM10 and CM11 - but I might be wrong).
Click to expand...
Click to collapse
There's an app called GalaxSim Unlock. Download it from the play store and start it (needs root).
If it tells you your phone is updated to a new system not supported yet it should be EFSv2.
Search XDA for EFS repair... You should find a giant topic that might help you. Unfortunately it didn't work for me anymore...
And by the way, CM is an AOSP-based rom so it will only work with EFSv1. If you have lost your EFSv1 you can run Samsung original roms, Samsung leaked roms and Samsung-based custom roms...
Goldendawn said:
In fact I think you have just hit my problem....
As stated the whole reason I have gone custom ROM is due to the fact that Samsung update failed to update on my phone (flashed okay, but all applications afterwards were giving FC, including TouchWiz, etc, etc. Did factory resets, the works, but nothing worked.)
However, after that CM10 worked fine, but everything here hasn't worked so far.
Could it be ... maybe. that the original Samsung update upgraded the EFS to V2.
Is there a way for me to tell if EFS is on V2 or V1?
If it is V2 - then I know the problem, and then I will just have to use Custom Roms which support V2 (which my understanding is CM10 and CM11 - but I might be wrong).
Click to expand...
Click to collapse
Wat is ur baseband version? U can find it at about phone in settings.
Sent from my GT-I9300.
Give a thank if i helped you.
j_dee said:
There's an app called GalaxSim Unlock. Download it from the play store and start it (needs root).
If it tells you your phone is updated to a new system not supported yet it should be EFSv2.
Search XDA for EFS repair... You should find a giant topic that might help you. Unfortunately it didn't work for me anymore...
And by the way, CM is an AOSP-based rom so it will only work with EFSv1. If you have lost your EFSv1 you can run Samsung original roms, Samsung leaked roms and Samsung-based custom roms...
Click to expand...
Click to collapse
Thanks you J_Dee
This is it - the Samsung Update Over The Air upgraded the EFS to V2, this is why I am having issues with the AOSP on here which are not upgraded to V2 EFS.
And if CM is an AOSP based Rom how come CM10 works fine? (In fact I have just reflashed back to CM10 and it is working fine - and confirmed that GalaxSim is giving the same Device updated Error)
So it appears CM10 is using EFS V2???
Goldendawn said:
Thanks you J_Dee
This is it - the Samsung Update Over The Air upgraded the EFS to V2, this is why I am having issues with the AOSP on here which are not upgraded to V2 EFS.
And if CM is an AOSP based Rom how come CM10 works fine? (In fact I have just reflashed back to CM10 and it is working fine - and confirmed that GalaxSim is giving the same Device updated Error)
So it appears CM10 is using EFS V2???
Click to expand...
Click to collapse
Nope. Tats weird. Can u give me ur baseband version?
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
Nope. Tats weird. Can u give me ur baseband version?
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
I included these in my first post - but right now my Baseband Version is
I9300BUUGMJ3
It had changed a couple of times based on the ROM installed at the time.... and if I picked the MG4 modem.
Goldendawn said:
I included these in my first post - but right now my Baseband Version is
I9300BUUGMJ3
It had changed a couple of times based on the ROM installed at the time.... and if I picked the MG4 modem.
Click to expand...
Click to collapse
Tats weird. U are using efs v2 but cm works. I am using efs v1. Aosp nvr uses efs v2
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
Tats weird. U are using efs v2 but cm works. I am using efs v1. Aosp nvr uses efs v2
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
And that is now confusing me from some of the stuff I have read. Is CM10 doing something that other people are not doing in their ROMs?
Is there other CM10 roms I can test that you suggest?
Goldendawn said:
And that is now confusing me from some of the stuff I have read. Is CM10 doing something that other people are not doing in their ROMs?
Is there other CM10 roms I can test that you suggest?
Click to expand...
Click to collapse
All aosp roms are based on cm.
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
All aosp roms are based on cm.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
Okay - then I am even more confused - why does CM10 work fine - however so far none of the other ones I have used work?
I would continue to use CM10 - however all the Samsung Software has now disappeared... S-NOTE for example - ones I was using.
I am thinking of giving SentinelROM v6.00 a try - since it was based off the CM11 Code, however, that still doesn't give the Samsung software again. Also looking for EFS repair stuff to see if I can work anything out there.
Goldendawn said:
Okay - then I am even more confused - why does CM10 work fine - however so far none of the other ones I have used work?
I would continue to use CM10 - however all the Samsung Software has now disappeared... S-NOTE for example - ones I was using.
I am thinking of giving SentinelROM v6.00 a try - since it was based off the CM11 Code, however, that still doesn't give the Samsung software again. Also looking for EFS repair stuff to see if I can work anything out there.
Click to expand...
Click to collapse
Or u can just wait for samsung to update 4.3 for ur country and just flash it.
Sent from my GT-I9300.
Give a thank if i helped you.
JellyYogurt said:
Or u can just wait for samsung to update 4.3 for ur country and just flash it.
Sent from my GT-I9300.
Give a thank if i helped you.
Click to expand...
Click to collapse
That is what happened - Got the update for S3 sent from Samsung to my phone and it stopped my phone working. I was getting FC on all applications.
Hi
i have GS2 I9100 4.1.2
i tried to intall kitkat roms that avilabe on Xda fourms
but whenever i install one of the rom ..there is no network, i have checked the imei and its corret
i tired to flash modems and still the same problem
and tried Getril apk from goolePlay store and its not working also
and tried to install 2 others stock roms and also the same problem
still there is no network when i flash a cutsom rom ( kitkat) so please can you help me
thanks alot
ziadmamo said:
Hi
i have GS2 I9100 4.1.2
i tried to intall kitkat roms that avilabe on Xda fourms
but whenever i install one of the rom ..there is no network, i have checked the imei and its corret
i tired to flash modems and still the same problem
and tried Getril apk from goolePlay store and its not working also
and tried to install 2 others stock roms and also the same problem
still there is no network when i flash a cutsom rom ( kitkat) so please can you help me
thanks alot
Click to expand...
Click to collapse
Never flash RIL on custom roms, you will break network.
Have you tried flashing an original samsung rom to see if network works? maybe your board is broken..
Lysergic Acid said:
Never flash RIL on custom roms, you will break network.
Have you tried flashing an original samsung rom to see if network works? maybe your board is broken..
Click to expand...
Click to collapse
you misunderstanding my problem!!
i have SG2 i9100 stock rom 4.1.2 ok network is working good
... i tried to install a kitkat rom
but when install the Slim rom or cyanogen rom or other roms ,, i have no network . . i checked the imei and its okay
with the stock rom i have no problem
only with custom roms
so what do you think the problem is ????
ziadmamo said:
you misunderstanding my problem!!
i have SG2 i9100 stock rom 4.1.2 ok network is working good
... i tried to install a kitkat rom
but when install the Slim rom or cyanogen rom or other roms ,, i have no network . . i checked the imei and its okay
with the stock rom i have no problem
only with custom roms
so what do you think the problem is ????
Click to expand...
Click to collapse
Are you sure you are installing the correct version? Have you tried reinstalling the custom rom(s)? I'm pretty sure that the custom roms use the same modems from the stock rom (doesn't install a new one). Is the network settings ok? Is there any signal strength? Please let us know your answers.
gsstudios said:
Are you sure you are installing the correct version? Have you tried reinstalling the custom rom(s)? I'm pretty sure that the custom roms use the same modems from the stock rom (doesn't install a new one). Is the network settings ok? Is there any signal strength? Please let us know your answers.
Click to expand...
Click to collapse
yes i tried to reinstall the roms many times but no signal !! at first boot the signal appears for 1 min and then says ( emergecny calls only) the imei is there / i have checked it
stock rom is working good without issue ..
network settings are ok ..
ziadmamo said:
yes i tried to reinstall the roms many times but no signal !! at first boot the signal appears for 1 min and then says ( emergecny calls only) the imei is there / i have checked it
stock rom is working good without issue ..
network settings are ok ..
Click to expand...
Click to collapse
Emergency calls only? This seems really strange. Assuming that your sim is still activated, you shouldn't really be experiencing this problem. If you changed the modem to a different one from the original, I would highly advise you to flash back the original modem (since you have changed the modem).
That just dont makes sense, the only explanation to this would be a rom with a broken ril
gsstudios said:
Emergency calls only? This seems really strange. Assuming that your sim is still activated, you shouldn't really be experiencing this problem. If you changed the modem to a different one from the original, I would highly advise you to flash back the original modem (since you have changed the modem).
Click to expand...
Click to collapse
as i told you .. i was have stock rom working wothout problem
when i flashed this rom: http://forum.xda-developers.com/galaxy-s2/development-derivatives/rom-slimsaber-i9100-t2350201
it installed correctly but no network and the imei is there .
so can you give me a way to flash a kitkat rom for SG2 I9100 stock 4.1.2 ?
i flashed another stock rom its work well
but when i flash a kitkat rom over it , same problem no network?
Lysergic Acid said:
That just dont makes sense, the only explanation to this would be a rom with a broken ril
Click to expand...
Click to collapse
ok im agree with you
but what the solution for this
how can i flash kitkat rom for my GS2 i9100 4.1.2 because i tried many roms from XDA and no network ??
ziadmamo said:
ok im agree with you
but what the solution for this
how can i flash kitkat rom for my GS2 i9100 4.1.2 because i tried many roms from XDA and no network ??
Click to expand...
Click to collapse
Honestly I don't know. I never saw such a problem before, I don't know what you are doing wrong because all the kitkat roms for i9100 have a working network for a year I think. Make sure you are following the installation instructions correctly :good:
Lysergic Acid said:
Honestly I don't know. I never saw such a problem before, I don't know what you are doing wrong because all the kitkat roms for i9100 have a working network for a year I think. Make sure you are following the installation instructions correctly :good:
Click to expand...
Click to collapse
i'm totally sure i followed the installation instructions , but can you give stock rom 4.1.2 for my S2 and a kitkat rom you test with installation instructions ??
ziadmamo said:
i'm totally sure i followed the installation instructions , but can you give stock rom 4.1.2 for my S2 and a kitkat rom you test with installation instructions ??
Click to expand...
Click to collapse
Well the stock rom you can get from sammobile and flash with odin, talking about kitkat I'm personally using the CyanogenMod 11 M12, network works flawlessly, but I also recommend @Markox89 linaro/sabermod builds because they rock (and have working network haha)