Related
I tried to upgrade to the 2.2 operating system using a guide on android forums.
I originally had a rooted 2.1 OS, I don't know if I unplugged it before the process was complete or if I had to return to a stock OS prior to upgrading; however now I cannot get to download mode to use Odin again.
I have read through some threads and I have a different case, I am not stuck at the Vibrant screen, I get past it. Upon boot up I get the Galaxy S screen followed by an Android System Recovery <3e> screen with some other texts. If I hold the power button, I will get the "Power Reset or Unknown Upload Mode" screen. If I continue to hold the power button, the phone will cycle between those three modes, the Galaxy S screen, the Android System Recovery screen, and the unknown upload mode screen.
I have and am still trying different key combinations to get back to recovery mode in attempts to reload the stock OS and then continue with the 2.2 upgrade.
I have made a video that I will post when I get home later today; any help will be appreciated.
Thanks.
What about pull battery plug in usb hold volume keys while placing battery back in DOWNLOAD MODE
Still flashing , thanks to odin & tw
You will be ok. Learn ODIN and you will have your phone back in a hour or so.
willsnews said:
What about pull battery plug in usb hold volume keys while placing battery back in DOWNLOAD MODE
Still flashing , thanks to odin & tw
Click to expand...
Click to collapse
I just tried this and it does the same thing; bring me to the Android system recovery screen.
Try it again timing is key
Still flashing , thanks to odin & tw
willsnews said:
Try it again timing is key
Still flashing , thanks to odin & tw
Click to expand...
Click to collapse
Just did this religiously for 20 mins. Pull battery, plug in USB, hold vol keys while putting in battery.
Any other tricks?
Thanks for the help.
Check the bible section there Is a way to force it something I remember about a wire modification that can be made to force it not sure go to the bible and search a bit I'm sure youll turn up something wish I was more help ive never had this problem
Still flashing , thanks to odin & tw
koakoa said:
I tried to upgrade to the 2.2 operating system using a guide on android forums.
I originally had a rooted 2.1 OS, I don't know if I unplugged it before the process was complete or if I had to return to a stock OS prior to upgrading; however now I cannot get to download mode to use Odin again.
I have read through some threads and I have a different case, I am not stuck at the Vibrant screen, I get past it. Upon boot up I get the Galaxy S screen followed by an Android System Recovery <3e> screen with some other texts. If I hold the power button, I will get the "Power Reset or Unknown Upload Mode" screen. If I continue to hold the power button, the phone will cycle between those three modes, the Galaxy S screen, the Android System Recovery screen, and the unknown upload mode screen.
I have and am still trying different key combinations to get back to recovery mode in attempts to reload the stock OS and then continue with the 2.2 upgrade.
I have made a video that I will post when I get home later today; any help will be appreciated.
Thanks.
Click to expand...
Click to collapse
I am no expert by any means but perhaps the following might be of help:
try selecting reinstall packages when the stock recovery screen comes up, this may allow you to access CWM Recovery.
also try-- set up odin on Pc and plug in usb cable to Pc ONLY. Then with power off and phone not connected to Pc hold down both volume up and volume down and plug the usb in FROM computer this should take you to Download mode.
Try to reboot your phone with adb.
To get into download mode do this:
remove battery
replace battery
Hold both volume keys.
plug in USB
at no time touch the power button.
Takes me into download mode every time!
willsnews said:
Check the bible section there Is a way to force it something I remember about a wire modification that can be made to force it not sure go to the bible and search a bit I'm sure youll turn up something wish I was more help ive never had this problem
Still flashing , thanks to odin & tw
Click to expand...
Click to collapse
I'm going to take a look, thanks!
tenbeau said:
I am no expert by any means but perhaps the following might be of help:
try selecting reinstall packages when the stock recovery screen comes up, this may allow you to access CWM Recovery.
also try-- set up odin on Pc and plug in usb cable to Pc ONLY. Then with power off and phone not connected to Pc hold down both volume up and volume down and plug the usb in FROM computer this should take you to Download mode.
Click to expand...
Click to collapse
I forgot to mention that although in the android system recovery <3e> mode that I get I can scroll up and down using the vol keys but cannot select ANY options using the power key. None of the other keys can be used for selection either.
shabgard said:
Try to reboot your phone with adb.
Click to expand...
Click to collapse
When I try to ADB I get the following per command.
If I use the "ADB Devices" command I get "list of devices attached" and nothing more.
If I use "adb reboot recovery" I get "a device not found."
I have Samsung Kies installed, and the android drivers installed.
ronin4740 said:
To get into download mode do this:
remove battery
replace battery
Hold both volume keys.
plug in USB
at no time touch the power button.
Takes me into download mode every time!
Click to expand...
Click to collapse
Still takes me into the 3 mentioned screens in my OP. Upon boot up, without hitting any buttons, I will get into those 3 screens.
I appreciate everyone's help so far!
Phone is still having this problem, anymore ideas?
Thanks and hope everyone has a good weekend!
ronin4740 said:
To get into download mode do this:
remove battery
replace battery
Hold both volume keys.
plug in USB
at no time touch the power button.
Takes me into download mode every time!
Click to expand...
Click to collapse
Holy crap... I'm so glad I found these instructions. Worked like a charm. Key instruction was to hold down both volume keys and THEN plugging it in. BEAUTIFUL!
i just flashed simply honey 3.8 via odin, i did back to stock before via odin (came from cm7) but after flashed simply honey, my phone stucked at rainbow screen sayin partition partition stupid partition, so i read that to get rid that rainbow i should flash gb bootloader, then i flashed the bootloader via odin, yeah the rainbow has gone but my phone keeps bootloping in vibrant and bullet screen then sayin partition2 bla bla, i can't get to odin with 2 button combo, it's just go to charging wtf, i can't even get to cwm via 3 buttons combo, help me guys, thx in advance
Have you tried
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Just checking, did you take out your battery, unplugged the usb, put the battery back in, then held vol up, vol down, and power and released all three as soon as you saw the Vibrant logo?
and if that doesnt work try all the steps above but minus one step! hold down both volume buttons except power and see if that works!
nomadrider123 said:
Have you tried
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Click to expand...
Click to collapse
nah, it doesn't work, it just keep showing the charging screen, even i keep holding the three button then reinsert the battery it just keep goin to charge mode over and over and if i release the power button only the phone sayin "partition" in chargin mode but not get into download mode at all, im pretty desperate right now, this is my first smartphone and i bricked it, how stupid i am
movieaddict said:
and if that doesnt work try all the steps above but minus one step! hold down both volume buttons except power and see if that works!
Click to expand...
Click to collapse
no it doesn't work it still can't go to download mode, its in charging mode keep saying that stupid partition, thx for replying my thread btw
It's not bricked, I know you're mad and frustrated, trust me, I've been there a million times!
Lets try taking out the battery and leave it out for 15 minutes. Reboot your computer and unplug every usb.
Then try the above steps again.
crazy25000 said:
It's not bricked, I know you're mad and frustrated, trust me, I've been there a million times!
Lets try taking out the battery and leave it out for 15 minutes. Reboot your computer and unplug every usb.
Then try the above steps again.
Click to expand...
Click to collapse
tried it, still my phone can't see the download mode screen, i can't bring it to t-mobile since i don't live in states
If you flashed the bootloaders then the mapping is different. Try power button and volume up without the usb plugged and with the battery in. That should get you in download mode.
bricked
tried it, still my phone can't see the download mode screen, i can't bring it to t-mobile since i don't live in states
Click to expand...
Click to collapse
You are not bricked. I just had the same thing happen flashing the light version with Rom Manager. Since you flashed the Bootloaders, the key combination has changed. Hold down the volume up and power key. Release when you see the vibrant logo-that should take you into red recovery. When there, go to voodoo, choose disable. It will tell you it is 'actually enable' and will be disabled next boot. So reboot and let it do its thing. When I did it the Android in space finally showed up.
EDIT: I'm pretty sure you don't need to go into download mode to reflash with odin, just disable the lagfix. If it doesn't boot into the Android, then volume down+power will take you into download and reflash after the lagfix is finished disabling.
EDIT 2: And with the Gingerbread bootloader, you can't go into download mode if plugged in anymore. It will not go past the charger like on the Froyo Bootloaders.
EDIT 3: Sorry got the key mapping backwards, lol here it is straight from the Bootloaders site.
Gingerbread Bootloaders - No Rainbow - Fully visible Recovery on all ROMs
Benefits - No more rainbows on Gingerbread 2.3 ROMs like Simply Honey GB, LiDroid, Asgard, etc.
Convenient Key Maps for entering Recovery and Download Modes. (I personally like these mappings over the Standard Vibrant Mapping as you can enter download mode directly without needing to turn off phone or remove battery etc...)
For Recovery - Lower Volume Key + Power Button
For Download - Upper Volume Key + Power Button
Click to expand...
Click to collapse
RaymondPJR said:
You are not bricked. I just had the same thing happen flashing the light version with Rom Manager. Since you flashed the Bootloaders, the key combination has changed. Hold down the volume up and power key. Release when you see the vibrant logo-that should take you into red recovery. When there, go to voodoo, choose disable. It will tell you it is 'actually enable' and will be disabled next boot. So reboot and let it do its thing. When I did it the Android in space finally showed up.
EDIT: I'm pretty sure you don't need to go into download mode to reflash with odin, just disable the lagfix. If it doesn't boot into the Android, then volume down+power will take you into download and reflash after the lagfix is finished disabling.
EDIT 2: And with the Gingerbread bootloader, you can't go into download mode if plugged in anymore. It will not go past the charger like on the Froyo Bootloaders.
EDIT 3: Sorry got the key mapping backwards, lol here it is straight from the Bootloaders site.
Click to expand...
Click to collapse
YOU GUYS ARE AWESOME! THAAAAAAAAAANKSSSSSSSSS I can go to download mode, sorry for my noooobnesss
bricked
YOU GUYS ARE AWESOME! THAAAAAAAAAANKSSSSSSSSS I can go to download mode, sorry for my noooobnesss
Click to expand...
Click to collapse
Glad you are happy, lol! I'm flashing the medium version right now from recovery and will do the full whenever it finishes downloading.
Glad you got it worked out!
nasgadth said:
YOU GUYS ARE AWESOME! THAAAAAAAAAANKSSSSSSSSS I can go to download mode, sorry for my noooobnesss
Click to expand...
Click to collapse
I'm impressed with your risk taking capabilities man... Dont know how old you are to Android, and I'm not commenting on that, but from what I see, you are just 15 posts old, and you managed to flash Bootloaders to your phone...
Do read the OP for possible solutions before you flash anything... That said, till you have a screen, its not a brick.
Flash the bootloaders, using the new key mapping, and then flash the ROM, you should be good to go !!!
maybe one of you guys can help me here
i have the rainbow screen and i cannot get computer to recognize phone. i have to get into download mode with a dongle and odin still does not recognize my phone. i cannot boot into recover as the screen is completely rainbowed out and I cannot see what I am doing.
Are there any suggestions on what to do from here?
Thank you
I just updated to Android 2.3 but I don't like it. So I decided to flash back to 2.2 via ROM Manager. I tried to root the phone with Super One Click v1.9.1. But it got stalled at running psnueter and later gave an error message. I tried a few other tricks but nothing was working. So I decided to do the manual flash with Odin. When I tried to boot into download mode, the phone jut booted as normal. I tried by turning the phone off, plugging in the USB cable and then booting it while holding the volume buttons. I tried again using the similar method but with the battery pulled then reinserted. Again, it booted as normal. I then tried using my jtag dongle which I made a long time ago, and the phone still booted as normal. After some playing with the phone, I have found the phone doesn't seem to be entering debugging mode (when I plug in the cable with debugging mode activated, I just see a USB symbol and I can open the notifications menu and select it where it allows me to connect to phone to the computer as if in mass storage mode.) I am stuck and have no idea how to fix this. Anyone out there have any ideas?
I found out, with Gingerbread 2.3 you only hold the volume down button. Hope this helps others!
Did you perhaps also install a different bootloader? They change the shortcuts used to get into download or recovery mode sometimes, so try booting holding down just one volume up or down button.
Steelstiletto said:
Did you perhaps also install a different bootloader? They change the shortcuts used to get into download or recovery mode sometimes, so try booting holding down just one volume up or down button.
Click to expand...
Click to collapse
Actually it is like this: recovery= volume down+ power and download mode= volune up+ power.
Sent from my SGH-T959 using XDA Premium App
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Many people have your problem. I have my Lte verizon bricked as yours. The problem is demaged bootloader, only nvflash can fix it but actually our bootloader is locked and we need a hex key called sbk. At least we have to wait that somebody hack our tab from the basement. For now we can only search and share result.
pickupcash said:
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Click to expand...
Click to collapse
Did you solved the issue?
Please share ..., i face the same problem now ...
regards,
erwien.
Did you solved the issue.
share me......i face the same problem now
.
.
.
.
.
.
.
.
.
.
.
.
help me plz
So i was using RessurectionRemix (a version from last month) and recovery twrp 3.1.0-0 and the phone was working great!
Yesterday i left my phone charging over night and in the morning i wake up to my phone bootlooping!
So i tried different things including everything it says here https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949 without luck
I can get it into recovery and fastboot but as soon as i let the key combination go the phone stops and just shows a black screen (screen is on) and i cant get into qualcomm recovery to flash!
And the only way to shut off the phone is by holding power + vol up + vol down!
Any solution or suggestions?
Use flashone method to unbrick
md07 said:
Use flashone method to unbrick
Click to expand...
Click to collapse
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
try to flash fastboot rom from cucoco's.
Tsoler said:
As i already mentioned i cant get into qualcomm recovery so i cant use flashone
Click to expand...
Click to collapse
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
md07 said:
connect phone to computer, try force shutdown phone by hard button, ater phone shutdown, immediately release power but keep both volume. Phone maybe will enter Qualcomm flash dead mode, and Flashone will regconize com phone (refresh nedded)
Hope you success ! And believe, if a phone can flash with Qfil or Flashone, almost that phone never die (software)
Click to expand...
Click to collapse
Did what you said but nothing happens
kayyappan said:
Are you able to connect to the phone via Vysor, either via Chrome browser or as a standalone app on Windows PC when the you do not see anything on the phone screen? Please post if Vysor install goes thru successfully. Hope your developer options/USB debugging are on. I assume your phone boots but may have display issues either hw or sw.
Click to expand...
Click to collapse
Phone gets recognized but not long enough to do anything (windows makes sound but doesn't install anything and doesn't show up in device manager)
try this guide
https://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
After a lot of trying i found out that when i keep pressed power + vol down or vol up while connected to pc and device is off it gets recognized as
qualcomm hs-usb qdloader 9008 long as i keep the keys pressed so i tried the flashone method but it just says could not connect
Are Qualcomm drivers loaded on your computer? I have not used flashone. I used QPST to see if phone is connected. I am not sure if they are same.
kayyappan said:
You have mentioned that you are able to see the device in recovery and fastboot till you release the buttons - does this mean if the buttons are held say in fastboot mode you are able to see the device via "fastboot devices" or in recovery the twrp screen or nothing ever shows up at all? Are the buttons clicking properly? Check individually to make sure - particularly the power button. Does it vibrate at any point of time when you press and hold the power button? Are you able to see any backlight when you say the screen is on?
If there no backlight shine a torch or sunlight from the side of the screen to see anything at all on the screen.
Vysor reports apk not installed when it attempts to download from PC to phone but fails. With Vysor you will have two windows one showing status of phone - this is the main window. The other is the mirrored one - that of the phone when you click view on the main window. I forgot that the phone requires approval to install the apk. Please see the attached thumbnails. Keep touching the screen about 3 cms up from the bottom of the screen (not the phone) to see any change. Hope your touch works.
I know it is quite frustrating to try a number of things. I recently went thru the same on Galaxy S4 to make sure the phone but for the screen works OK prior to ordering the screen. Besides in my case developer options was disabled and touch also did not work. It took about a week of learning and trying to see something on Vysor. I never have used a Sam phone till that time this broken phone was handed over to me.
Click to expand...
Click to collapse
It doesn't stay long enough in recovery or fastboot to do anything it shuts off after a few seconds even with the buttons pressed after that it just shows a black screen
Phone vibrates when i press power and shows leeco logo (not os logo) and after 1-2 seconds screen goes black and phone vibrates again and shows leeco logo again and just continues looping
if i try to press power + vol up normally it goes into recovery but as soon as recovery is loaded screen goes black (screen on just doesn't show anything) the same goes for fastboot if i press power + vol down it loads fastboot but after 1-2 seconds screen goes black
if i keep pressing keys the phone just stays longer in recovery/fastboot but only 4-5 seconds
I assume you have adb and fastboot. Since you say the screen remains on when booting to recovery open a command prompt at the directory where adb is and issue a command "adb devices" without quotes. Does it just exit without showing any device or throws up some error? Try this irrespective of the black screen.
Have you looked at and tried what is given by @HTC-TYTN2 at post #8? It is for Le Max 2 and you will find a link to Quallcomm drivers too. Do not bother that the link mentions X820 even your Max 2 is 821, 829, etc.
since it happened after charging, you might want to check your cable and battery. best is to get a cheap usb multimeter.
Gesendet von meinem LEX820 mit Tapatalk
I too thought it could be the battery based on that's the screen goes off. But he also mentioned that the screen remains on but nothing to be seen after a short while. Wanted to suggest slow speed charging probably via a laptop usb as I'm not sure if he used high speed charging resulting in battery issue.
Did you solve the problem?
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Tsoler said:
My phone just died completely! No response at all anymore. I'm contacting the seller now to send the phone back.
Looks like it is a hardware defect! A pretty odd one but nothing i can do anymore. I send it back and post what the problem is as soon as get any information.
Thanks to everyone who tried to help!
Click to expand...
Click to collapse
Try this:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp ?, only by fastboot
RaphaBraga23 said:
I can, pass the cuoco rom by qfil? Another type of flash, because I can not access recovery and twrp , only by fastboot
Click to expand...
Click to collapse
Try this via fastboot mode.:
https://www.androidfilehost.com/?w=files&flid=136823
download file, unzip, open folder, connect phone to USB via fastboot ( phone off phone + hold volume -) . Click to the flash app in your PC. The app should find the phone. Confirm TWRP problem -NO and start flash.
Drivers must be installed.
Drivers here.
https://uloz.to/!A6B4AmEVx87S/adbdriverinstaller-exe