Flashed Wrong Recovery - CWM and Download mode don't work - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.

Many people have your problem. I have my Lte verizon bricked as yours. The problem is demaged bootloader, only nvflash can fix it but actually our bootloader is locked and we need a hex key called sbk. At least we have to wait that somebody hack our tab from the basement. For now we can only search and share result.

pickupcash said:
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Click to expand...
Click to collapse
Did you solved the issue?
Please share ..., i face the same problem now ...
regards,
erwien.

Did you solved the issue.
share me......i face the same problem now
.
.
.
.
.
.
.
.
.
.
.
.
help me plz

Related

[Q] Worthless Vibrant

Well, after spending almost 11 hours trying to boot into recovery or download, I know for sure that there is something going on with my phone re: hardware locked. The date on my box is 7-16. It is an early Vibrant. But no matter what I do, I cannot get into download or recovery which means my ****ing phone is literally worthless.
I have tried all possible thousands of combination's of buttons, batteries, and cords while booting and nothing happens.
The Vibrant logo shows, then it shows the pink, annoying as hell T-mobile logo, than goes to the Galaxy S logo which loads for a little bit and then just leads me to a black screen. Eventually the 4 buttons on the front of the phone turn on and then nothing else happens. It will just sit like this forever.
I know all I need to do is get a working ROM loaded but it is literally impossible to do so.
Can anyone offer any suggestions? Or are anyone else having the same problem?
I guess the only way I can get a working phone is to get in touch with T-mobile and do a Warranty exchange. That's a damn shame too, because I will be without a working phone for a week.
What about using adb?
adb reboot recovery -or- adb reboot download ?
I had a hw locked vibrant, never tried the adb reboot download, recovery did work.. I added another line on my account last night for somone, who got a vibrant, theirs wasn't hw locked, so I traded 'em ;P
Agree with the above poster I have been stuck on the vibrant screen or dark screen and adb still worked to save me
when i try to use adb, it just tells me that it cant find the device. i'm not able to boot into android OS at all.... screen just hangs. so my computer is never getting a chance to see my phone hence why i cant use adb to reboot it into recovery or download.
I believe your device has to go into recovery mode then check with and devices and if you see a device I THINK it is and reboot download, I am 90% certain
Sent from my SGH-T959 using Tapatalk
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
98classic said:
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
Click to expand...
Click to collapse
i do believe i have the correct drivers installed. i was able to use adb to run lagfixes before i was having this problem. when i boot my phone, i get a sound from my computer saying that it recognizes a usb device. the two drives in the vibrant show up in My Computer but i cannot access them as windows says they are not accessable at the moment.
at what point will adb be able to recognize my phone when booting? no matter what i do when i try adb shell i get error: device not found
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Same problem here. I probably just have to sell it fast on ebay or something. Hopefully some kind of fix starts by the end of the week. First phone in my smartphone life to brick from a simple Voodoo lag fix. Please XDA gods find a solution.
crazycaveman said:
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Click to expand...
Click to collapse
nope, no go. adb will not recognize my device no matter what. and the device isnt loading the OS so i cannot turn debugging on. i guess this is a real "brick" then.
This sounds like a rant rather than a question. Just sayin'.
DKYang said:
This sounds like a rant rather than a question. Just sayin'.
Click to expand...
Click to collapse
fixed that. my bad.
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
renocivik said:
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
Click to expand...
Click to collapse
thanks for the suggestion. i found your thread and went through the steps in the OP... still no luck. no matter what i do, i cannot get passed the black screen the loads after the galaxy s logo. i also cannot get into download mode or recovery no matter what combination of button presses i use.
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
core99 said:
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
Click to expand...
Click to collapse
this isnt working either. :-(
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
atoz350 said:
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
Click to expand...
Click to collapse
this is exactly the method i want to try. but unfortunately i cannot get the phone into recovery or download mode. i have tried at least 100 times now with many different combination's of plugging the usb cord in and pressing the volume and power buttons.
two ideas: one, is it possible that i wiped recovery and download mode from my phone on accident? the reason why i ask is that i was super tired and flashing roms and kernels to my phone. i flashed back to my original stock rom and then i flashed the kernel. for some reason, i selected wipe date/cache in Rom Manager before flashing the kernel. i have no idea why i did this. seriously. totally noob move. so im assuming i have a kernel flashed but now there is no ROM installed for the phone to boot into.
two, if above is not the issue, than im going to assume that the phone is not recognizing any button presses while its off, so when i turn it on it just recognizes that the power was pressed and ignores the volume presses, thus not booting the phone into recovery or download.
edit: i should mention again that at no time does adb recognize my device. so i cannot use adb to reboot the phone into the mode i need.
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
byt3b0mb said:
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
Click to expand...
Click to collapse
I understand what you mean. I appreciate your criticism of my original post. Let me say that I wrote it while frustrated. But I know that isn't an excuse.
The device is fantastic. I know that I did this to it myself. It's unfortunate.
Anyways, I received a replacement phone. I will be more careful this time.

[Q] Can't get to Download Mode - stuck on loading screen

Hi All,
So, I tried to flash Cyanogen mod last night using the instructions here: http://wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide. I was coming from a BIONIX ROM that flashed fine.
Anyways, the phone went into a reboot loop in the recovery screen and I foolishly just held the power button until it stopped. When I turned it back on it was broken. That is, now all it does is display the white Vibrant logo in the middle of the screen with the smaller Samsung logo below it. If I hold the power button for about 8 seconds the screen goes black for about 2 seconds and then comes right back up to where it was. I can't seem to even turn the phone off any more. It just stays on that screen permanently unless I hold the power button, in which case the screen is off for 2 out of every 10 seconds. Yanking the battery of course turns it off, but putting it back in immediately returns it to the state I've described.
I've scoured these forums and tried every button press + battery state + cable state + SD card/SIM state combo suggested, but the phone won't go to download or recovery mode. I found one thread describing the exact same problem. The OP said he'd try a jig and then disappeared without any further updates. I'm going to try to get my friend to make a jig using one of these sets of instructions
http://forum.xda-developers.com/showthread.php?t=819551
http://factoidz.com/how-to-unbrick-your-samsung-vibrant-galaxy-s/
but until then my questions is: does anyone have any experience with this problem (can't even turn the phone off)? If so, do you have any recommendations? Did a Jig work?
keep trying to get to download mode, pull battery, plug usb in to computer and to the phone, while holding both volume up and volume down pop in the battery. People have tried hundreds of times with it not working and then all of a sudden *bam* download mode.
So... my friend made me a jig and it works in that I can see the shoveling droid indicating download mode. However Heimdall/Odin won't recognize my phone. Heimdall's zadig utility won't locate the phone either, even with the cable plugged in. I'm, once again, stumped.
Just an update; I've tried Odin on three different computers, two Windows 7 (64 bit) and a Mac (with Heimdall). None of them seem to recognize the phone. Device manager on the Windows 7 machine does not update when I plug the phone in (in Download mode via the jig or not) and I can't find anything about Samsung in it anywhere. However I have installed the Samsung drivers; a few different sets I've found around the forums. I've also tried a couple utilities like the Vibrant toolbox and one click unbrick. Nothing seems to have any effect. I was so hopeful when the jig worked and got me to download mode, but now it's seeming I'm actually bricked. Has anyone seen a phone that could get to download mode but still be bricked? Oh, and I checked the cable using a friend's phone; her Mac recognized her phone using the cable. Haven't tried her phone on my Window's machines though.
Once again, any help is more than appreciated.
Have you tried to see if adb is working? If it does then try adb reboot recovery? If it works there is a file I can post for you later (is in my pc) that can restore your sbl.bin and fix your download mode problems.
Thanks for your help everyone, the problem was apparently resolved by a new cable; which is strange because the old one works for data transfers... just not for flashing apaprently. :S

Boot Loop on Galaxy Tab 10.1 that prevents shutting device off.

So I already posted in both threads similar to mine I'm posting now, but those problems seem to be different from the problem I'm having.
So everyone says to do the emergency "power on with volume up held down"
But mine never powers off. The Boot loop goes from the boot loop sequence, and if I force it off it goes to "Entering Upload Mode: Cause Unknown". Forcing that off it immediately boots into the boot loop. So I can never shut it off, so I can never enter the emergency "hard reset" mode, because the device never shuts off. Eventually the battery dies, but the hard reset doesn't worth then either.
Does anyone know how to use the upload mode? The link to a samsung driver in the other thread is now a broken link. And once I'm able to write data to the device, where do I get the right set of android hard reset files?
I have no data on the device I need.
I have a very similar situation. Since yesterday my tab got caught in a boot loop. Didn't made any changes, just went into it. And the only way to turn it off is to force it to go to download mode and turn it off down by holding power button from there. I have rooted it a long time ago. I can't get into recovery mode by holding power+up. All I can get it the download mode that first says "waiting for usb cable" and if I connect it to the PC it goes to "press the [START] of Odin3". Do I need to try the fastboot method and reset it to factory details? I've being trying to do that but no devices were listed... Or do I need to reflash something with oding again? Please, just give me a tip.
Does anyone know how to use "upload mode" ?
Clyde_Frog said:
Does anyone know how to use "upload mode" ?
Click to expand...
Click to collapse
what the heck is upload mode?
i know what download mode is but what is upload mode?
can you get into download mode?
pwr + button next to it...hold until a menu pops up.
if you can then just flash a odin rom from there...get it from here or sammobile.com
hi
i have similar situation. i have a boot loop also. i can get into download mode. but then i can't get into odin3 download mode. it's stuck on waiting usb cable.
i just want to flash stock rom. i'v tried flashing a custom rom. but something went wrong and now i have this problem. hope somebody can help me.
If you're using a windows machine reinstall the drivers and see if that helps get past the problem. If you need links I have to get on my PC an copy and paste from there. Keep us updated. I've been there done that I think. So I hope I can help.
Sent from my GT-P7510 using one stinky finger.
Benzoman,
it worked! Tnx! i did what u suggested. i removed the samsung drivers and reinstalled them. now odin recognized my tab.
Glad I could be of help and you fixed the problem
by the way, there is a thanks button you could use.
Sent from my GT-P7510 using one stinky finger.
sorry, my bad! how about now? tnx
No problem. Now you got one to.
Sent from my GT-P7510 using one stinky finger.
Benzoman said:
If you're using a windows machine reinstall the drivers and see if that helps get past the problem.
Click to expand...
Click to collapse
What drivers? I've never installed any drivers of any kind, nor does my manual mention the need for drivers?
What is Odin, and why have I never heard of it? Why can't I find a download link for Odin?
Also, why can't I find any information about Odin?
This is the best I can find, but it appears to not be the maker.... http://www.rootingdroid.com/246/flash-your-samsung-with-odin-download-odin/
The instructions on that page:
" Using your data cable, connect your Android device to your computer. Turn off your mobile device for 30 seconds then power it up by pressing and holding HOME, POWER and VOLUME DOWN buttons until you will be prompted that you have entered in download mode."
I finally got into download mode! I had to connect the USB cable to the device. However, the copy of Odin3 I found is just a giant box with blank text fields. I have no idea what I'm doing with it. It did not auto detect my device, and I have no idea what firmware version I currently am using because I can't get the device to boot.

Phone won't turn on

Sometimes my I5500 won't turn on.
This has already happened 2 times (with two different firmwares I5500XWJPL and I5503TTLPJP9). The phone shows absolutely no signs of life - screen is black, no sounds, nothing.
I tried everything: pressing VolumeDown+Center+Power, VolumeDown+Home+Power, with or without battery/SIM/charger/SD. Tried removing battery for 30 minutes, charging battery in external charger.
Sometimes when charger is connected, it shows green battery on the screen, but still won't boot.
Last times I spent several hours fiddling with it until it finally turned on..
Can someone tell my if there is a fast way to revive the phone next time this happens?
Maybe your arm11boot is damaged, but still partly working. You need replace that partition. I saw arm11boot partition image in one Russian FW. I can't remember actual name. You can try that, but caution. You might brick your phone compleatly!
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Rigardi said:
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Click to expand...
Click to collapse
Take your battery out, put it back in and turn your phone on, then it will boot up into recovery mode. I also have this problem from time to time, sometimes it boots into recovery, sometimes not and i have to remove/replace the battery.
I actually thought that this might be a useful feature for say - if you wanted to upgrade a friends phone to cyanogenmod in the pub, for example.
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Rigardi said:
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Click to expand...
Click to collapse
In that case then this also happened to me - While exploring the rom manager application after first ever flashing my phone i accidentally selected the wrong phone model from the 'flash clockworkmod recovery' option and my phone was gone forever. Perhaps your problem is similar.
(Luckily it was under warranty and they replaced it. The method worked so well in fact it happened 'accidentally' a second time i acquired a 3rd i5500 out of the box )
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Rigardi said:
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Click to expand...
Click to collapse
what about the Emergency DLoad Mode, which is not the Download Mode? Did you try it?
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
how do I access emergency d/l mode?
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
ops, sorry: I miss your previous message!!
Now I got it and read this last post.. let some time to think about it, I'll replay soon.. but, generally speaking, at this point there's not so much you can do..
If you can get it into Download or Recovery mode, then you should be fine.
Sent from my GT-I5500 using XDA App
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
download mode is Vol - / Central Button / Power..
Im aware of that. However, Vol- + Menu + Power is the only key combination that the phone will react upon.
Anyway. Brought it to a mobile phone shop on friday, called them on monday and according to them, the phone should be fixed by tomorrow, wednesday. Seems like ROM manager has done damage that cant be undone without knowing how to handle a JTAG device. But at least its not completely broken. Learning that will cost me 25 Euros, though.
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Rigardi said:
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Click to expand...
Click to collapse
... for only 25 €!!!
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }

Download Mode note getting

Hii Friends,
Im using samsung mega 6.3. (GT-I9200)
im trying to update my mobile via odin. but when i try to enter download mode its not entering .
Please help me
(Volume down + home button+power button )
Dag_Nab.It
S/G MEGA 6.3 (AT&T-US) SGH-i527~GT-i9205
I have the same issue with my device not entering Download Mode. My device will ONLY go to main screen asking for password, which I no longer remember.
please help us
Still_Kicking...
VolumeUP+Home+Power, still getting 'no response' while holding all three down and releasing at start up.
*i forgot to mention that after StartUp, on the Enter Password request page, only the Power button operates. the VolumeUp, VolumeDown, and Home buttons do nothing. I have to press Power button after the screen has blacked out to bring-up the Enter Password request page again.
Today, I installed an old SIM card (SIM not provisioned MM#2) is displayed. I'll have to research this for the meaning as this is a first for me.
This time I held VolumeDown+Home buttons throughout the StartUp process. This time, on the Enter Password request page, in the lower left corner, Safe mode is stated. Anyone have some tips on what we can do while the device is in this mode as I have yet to read anything on Safe mode for any of the devices listed so far?
TO ENTER Safe mode:
Hold Power button until device starts up, release. Now hold down VolumeDown+Home buttons until Enter Password request page shows. The device should now state that its in Safe mode in the lower left corner. Please take note that this is on the S/G MEGA 6.3 (AT&T-US) SGH-i527~GT-i9205.
Galaxy Mega 6.3/ Black screen after ROM Flash
A friend of mine gave me his Galaxy Mega 6.3 as when he previously did something with the phones software, he messed something up and lost imei numbers, wifi and bluetooth wouldn't work however the phone would still turn on. Just like an MP3 player.
I struggle around a day to get this phone into download mode in order to flash its factory rom and i finally got the phone to download mode, i flashed the correct I9205 stock rom on and now the phone wont turn on.
No buttons light up including the blue LED at the top. The screen turns on and back off after a few seconds. No logo appears, but the phone does respond to the power button. Its like a bootloop but it loops before it gets to any sort of logo screen. I cant seem to launch to any sort of safe mode, recovery mode or download mode and the phone is not detected on my computer.
Any ideas on how to get this backup and running.
0Waiser0 said:
A friend of mine gave me his Galaxy Mega 6.3 as when he previously did something with the phones software, he messed something up and lost imei numbers, wifi and bluetooth wouldn't work however the phone would still turn on. Just like an MP3 player.
I struggle around a day to get this phone into download mode in order to flash its factory rom and i finally got the phone to download mode, i flashed the correct I9205 stock rom on and now the phone wont turn on.
No buttons light up including the blue LED at the top. The screen turns on and back off after a few seconds. No logo appears, but the phone does respond to the power button. Its like a bootloop but it loops before it gets to any sort of logo screen. I cant seem to launch to any sort of safe mode, recovery mode or download mode and the phone is not detected on my computer.
Any ideas on how to get this backup and running.
Click to expand...
Click to collapse
Did you check the PDA, CSC, and of course the md5 to make sure you had the right Firmware(ROM)? Where did you download it from?
How did you get the device into download mode?
kidcrazie said:
Did you check the PDA, CSC, and of course the md5 to make sure you had the right Firmware(ROM)? Where did you download it from?
How did you get the device into download mode?
Click to expand...
Click to collapse
I managed to get the device to download mode via the normal method of pressing volume home and power however it doesnt always work and it just restarts continuesly. I got the rom from sammobiles or something like that and i believe its the correct one. I have tried several other roms that is for mega 6.3 but no hope. However i did manage to get twrp installed. Do you by any chance know any os that you can link for me that i can install directly and only by using twrp installation?
0Waiser0 said:
I managed to get the device to download mode via the normal method of pressing volume home and power however it doesnt always work and it just restarts continuesly. I got the rom from sammobiles or something like that and i believe its the correct one. I have tried several other roms that is for mega 6.3 but no hope. However i did manage to get twrp installed. Do you by any chance know any os that you can link for me that i can install directly and only by using twrp installation?
Click to expand...
Click to collapse
There is LineageOS ROM with RR Remix. I have heard that you have to use Kies before you can use Odin3. Sorry for the late reply.
kidcrazie said:
There is LineageOS ROM with RR Remix. I have heard that you have to use Kies before you can use Odin3. Sorry for the late reply.
Click to expand...
Click to collapse
What if kies does not detect device.
0Waiser0 said:
What if kies does not detect device.
Click to expand...
Click to collapse
I understand the problem we are having but I haven't quite figured out a solution just yet. Even my PC isn't recognizing my device now. Don't know WTH!!!!

Categories

Resources