So I already posted in both threads similar to mine I'm posting now, but those problems seem to be different from the problem I'm having.
So everyone says to do the emergency "power on with volume up held down"
But mine never powers off. The Boot loop goes from the boot loop sequence, and if I force it off it goes to "Entering Upload Mode: Cause Unknown". Forcing that off it immediately boots into the boot loop. So I can never shut it off, so I can never enter the emergency "hard reset" mode, because the device never shuts off. Eventually the battery dies, but the hard reset doesn't worth then either.
Does anyone know how to use the upload mode? The link to a samsung driver in the other thread is now a broken link. And once I'm able to write data to the device, where do I get the right set of android hard reset files?
I have no data on the device I need.
I have a very similar situation. Since yesterday my tab got caught in a boot loop. Didn't made any changes, just went into it. And the only way to turn it off is to force it to go to download mode and turn it off down by holding power button from there. I have rooted it a long time ago. I can't get into recovery mode by holding power+up. All I can get it the download mode that first says "waiting for usb cable" and if I connect it to the PC it goes to "press the [START] of Odin3". Do I need to try the fastboot method and reset it to factory details? I've being trying to do that but no devices were listed... Or do I need to reflash something with oding again? Please, just give me a tip.
Does anyone know how to use "upload mode" ?
Clyde_Frog said:
Does anyone know how to use "upload mode" ?
Click to expand...
Click to collapse
what the heck is upload mode?
i know what download mode is but what is upload mode?
can you get into download mode?
pwr + button next to it...hold until a menu pops up.
if you can then just flash a odin rom from there...get it from here or sammobile.com
hi
i have similar situation. i have a boot loop also. i can get into download mode. but then i can't get into odin3 download mode. it's stuck on waiting usb cable.
i just want to flash stock rom. i'v tried flashing a custom rom. but something went wrong and now i have this problem. hope somebody can help me.
If you're using a windows machine reinstall the drivers and see if that helps get past the problem. If you need links I have to get on my PC an copy and paste from there. Keep us updated. I've been there done that I think. So I hope I can help.
Sent from my GT-P7510 using one stinky finger.
Benzoman,
it worked! Tnx! i did what u suggested. i removed the samsung drivers and reinstalled them. now odin recognized my tab.
Glad I could be of help and you fixed the problem
by the way, there is a thanks button you could use.
Sent from my GT-P7510 using one stinky finger.
sorry, my bad! how about now? tnx
No problem. Now you got one to.
Sent from my GT-P7510 using one stinky finger.
Benzoman said:
If you're using a windows machine reinstall the drivers and see if that helps get past the problem.
Click to expand...
Click to collapse
What drivers? I've never installed any drivers of any kind, nor does my manual mention the need for drivers?
What is Odin, and why have I never heard of it? Why can't I find a download link for Odin?
Also, why can't I find any information about Odin?
This is the best I can find, but it appears to not be the maker.... http://www.rootingdroid.com/246/flash-your-samsung-with-odin-download-odin/
The instructions on that page:
" Using your data cable, connect your Android device to your computer. Turn off your mobile device for 30 seconds then power it up by pressing and holding HOME, POWER and VOLUME DOWN buttons until you will be prompted that you have entered in download mode."
I finally got into download mode! I had to connect the USB cable to the device. However, the copy of Odin3 I found is just a giant box with blank text fields. I have no idea what I'm doing with it. It did not auto detect my device, and I have no idea what firmware version I currently am using because I can't get the device to boot.
Related
Well, after spending almost 11 hours trying to boot into recovery or download, I know for sure that there is something going on with my phone re: hardware locked. The date on my box is 7-16. It is an early Vibrant. But no matter what I do, I cannot get into download or recovery which means my ****ing phone is literally worthless.
I have tried all possible thousands of combination's of buttons, batteries, and cords while booting and nothing happens.
The Vibrant logo shows, then it shows the pink, annoying as hell T-mobile logo, than goes to the Galaxy S logo which loads for a little bit and then just leads me to a black screen. Eventually the 4 buttons on the front of the phone turn on and then nothing else happens. It will just sit like this forever.
I know all I need to do is get a working ROM loaded but it is literally impossible to do so.
Can anyone offer any suggestions? Or are anyone else having the same problem?
I guess the only way I can get a working phone is to get in touch with T-mobile and do a Warranty exchange. That's a damn shame too, because I will be without a working phone for a week.
What about using adb?
adb reboot recovery -or- adb reboot download ?
I had a hw locked vibrant, never tried the adb reboot download, recovery did work.. I added another line on my account last night for somone, who got a vibrant, theirs wasn't hw locked, so I traded 'em ;P
Agree with the above poster I have been stuck on the vibrant screen or dark screen and adb still worked to save me
when i try to use adb, it just tells me that it cant find the device. i'm not able to boot into android OS at all.... screen just hangs. so my computer is never getting a chance to see my phone hence why i cant use adb to reboot it into recovery or download.
I believe your device has to go into recovery mode then check with and devices and if you see a device I THINK it is and reboot download, I am 90% certain
Sent from my SGH-T959 using Tapatalk
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
98classic said:
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
Click to expand...
Click to collapse
i do believe i have the correct drivers installed. i was able to use adb to run lagfixes before i was having this problem. when i boot my phone, i get a sound from my computer saying that it recognizes a usb device. the two drives in the vibrant show up in My Computer but i cannot access them as windows says they are not accessable at the moment.
at what point will adb be able to recognize my phone when booting? no matter what i do when i try adb shell i get error: device not found
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Same problem here. I probably just have to sell it fast on ebay or something. Hopefully some kind of fix starts by the end of the week. First phone in my smartphone life to brick from a simple Voodoo lag fix. Please XDA gods find a solution.
crazycaveman said:
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Click to expand...
Click to collapse
nope, no go. adb will not recognize my device no matter what. and the device isnt loading the OS so i cannot turn debugging on. i guess this is a real "brick" then.
This sounds like a rant rather than a question. Just sayin'.
DKYang said:
This sounds like a rant rather than a question. Just sayin'.
Click to expand...
Click to collapse
fixed that. my bad.
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
renocivik said:
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
Click to expand...
Click to collapse
thanks for the suggestion. i found your thread and went through the steps in the OP... still no luck. no matter what i do, i cannot get passed the black screen the loads after the galaxy s logo. i also cannot get into download mode or recovery no matter what combination of button presses i use.
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
core99 said:
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
Click to expand...
Click to collapse
this isnt working either. :-(
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
atoz350 said:
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
Click to expand...
Click to collapse
this is exactly the method i want to try. but unfortunately i cannot get the phone into recovery or download mode. i have tried at least 100 times now with many different combination's of plugging the usb cord in and pressing the volume and power buttons.
two ideas: one, is it possible that i wiped recovery and download mode from my phone on accident? the reason why i ask is that i was super tired and flashing roms and kernels to my phone. i flashed back to my original stock rom and then i flashed the kernel. for some reason, i selected wipe date/cache in Rom Manager before flashing the kernel. i have no idea why i did this. seriously. totally noob move. so im assuming i have a kernel flashed but now there is no ROM installed for the phone to boot into.
two, if above is not the issue, than im going to assume that the phone is not recognizing any button presses while its off, so when i turn it on it just recognizes that the power was pressed and ignores the volume presses, thus not booting the phone into recovery or download.
edit: i should mention again that at no time does adb recognize my device. so i cannot use adb to reboot the phone into the mode i need.
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
byt3b0mb said:
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
Click to expand...
Click to collapse
I understand what you mean. I appreciate your criticism of my original post. Let me say that I wrote it while frustrated. But I know that isn't an excuse.
The device is fantastic. I know that I did this to it myself. It's unfortunate.
Anyways, I received a replacement phone. I will be more careful this time.
Hey everyone, i need help with my galaxy s phone, i recently thought it would be a good idea to try upgrading my phone to the new gingerbread firmware 2.3
the problem is that i used the version for the vibrant phone, dumb mistake i know, but it was late and i wasn't thinking clearly, anyways my phone is now stuck in recovery mode and i cant do anything.
I cant get into download mode to reflash and i cant select any of the options im givin in the recovery menu, is there any way to fix this?
As far as getting into download mode, are you sure you are holding vol down with no battery in as you connect to your computer? You need to Odin back to stock in order to recover your phone. (Just FYI, there is no official gingerbread support, and the two roms we current have on gb are CM7 and Kaoscinate v7, both of which are awesome, but not fully functional at this point)
See these threads:
http://forum.xda-developers.com/showthread.php?t=1053567
http://forum.xda-developers.com/showthread.php?t=1026746
thanks for responding artvandelay440, holding down vol button while connecting to my computer via usb does nothing, the phone wont turn on. I also tried holding down the volume button, connecting the usb, then putting in the battery and it just boots up and goes straight to the recovery mode, i guess my main problem i need to solve right now is how to get to download mode.
I check some other forums and looked into how to get the download mode to pop up when your having problems, tried them all and nothing worked, except for the command prompt thing, which i couldnt figure out how to do.
a while back someone did the exact same thing as you. there was no way he got it I to recovery mode after because of the differences in hardware between the fascinate and vibrant. sorry buddy
If you can't get into download mode, there is no hope that we can offer. Just to be sure, you take the battery out, hold the volume down key, and then while still holding it, you plug the USB cable in. If that isn't working, then you are SOL. What file did you flash, and can you link to it?
dave1ne said:
thanks for responding artvandelay440, holding down vol button while connecting to my computer via usb does nothing, the phone wont turn on. I also tried holding down the volume button, connecting the usb, then putting in the battery and it just boots up and goes straight to the recovery mode, i guess my main problem i need to solve right now is how to get to download mode.
I check some other forums and looked into how to get the download mode to pop up when your having problems, tried them all and nothing worked, except for the command prompt thing, which i couldnt figure out how to do.
Click to expand...
Click to collapse
the command line thing you are referring to is using ADB to reboot into either recovery or bootloader by the command "adb reboot recovery" or "adb reboot bootloader" No such option for d/l mode, though i'm afraid.
dave1ne said:
the problem is that i used the version for the vibrant phone, dumb mistake i know, but it was late and i wasn't thinking clearly, anyways my phone is now stuck in recovery mode and i cant do anything.
Click to expand...
Click to collapse
I wonder if the vibrant has a different button combo to get to download, and if it is remaped to that. Just something to look into. EDIT: NO, it is the same.
Try doing: adb reboot download - It works on a Vibrant according to the thread that I looked at. If that works, you are one lucky person, but it is always worth a try. You may not even be able to adb at all.
You could always try to make/buy a download mode jig.
bobloblaw1 said:
You could always try to make/buy a download mode jig.
Click to expand...
Click to collapse
wow I would be scared I would short something out using that....
fstbusa said:
wow I would be scared I would short something out using that....
Click to expand...
Click to collapse
You could always buy a jig-they are available from several reputable websites. I'd rather not recommend any, since i've never bought one, but google is your friend.
bobloblaw1 said:
You could always try to make/buy a download mode jig.
Click to expand...
Click to collapse
Yeah, I almost forgot about that. The question is.. Does it always work? I would think that it could work here since it is still a galaxy s varient flashed over. I'm not sure how deep down the download mode is and if it can be deleted/overwritten/corrupted. This is definitely worth it to save an expensive smartphone like the fascinate.
I have a samsung yp-g1 player. I was trying to flash the stock rom and something terrible went wrong. It was hanging there for like 40 minutes. I unplugged it from the usb and now when I push the power button, I see
phone, exclamation point, and computer. I purchased one of those galaxy jigs and all it does is load the same screen after 6 seconds or so. It will not go into download mode for nothing. Is there any help available? I greatly appreciate it.
Wrong section to post dude
Same thing happened to me with my galaxy player 5.0 just connect it to your computer and use heimdall or odin and it should flash back to stock
smoggysasquatch said:
I have a samsung yp-g1 player. I was trying to flash the stock rom and something terrible went wrong. It was hanging there for like 40 minutes. I unplugged it from the usb and now when I push the power button, I see
phone, exclamation point, and computer. I purchased one of those galaxy jigs and all it does is load the same screen after 6 seconds or so. It will not go into download mode for nothing. Is there any help available? I greatly appreciate it.
Click to expand...
Click to collapse
Wrong section, also this question has been covered MULTIPLE times, that screen is a sorta FORCED Download Mode, connect it back to the computer and reflash with Odin, i've got it several times myself and every time have fixed it with flashing thru Odin.
daniel644 said:
Wrong section, also this question has been covered MULTIPLE times, that screen is a sorta FORCED Download Mode, connect it back to the computer and reflash with Odin, i've got it several times myself and every time have fixed it with flashing thru Odin.
Click to expand...
Click to collapse
Same here. That exclamation mark screen IS a download mode. Connect it to your computer while it's showing that screen and reflash whatever ROM you were trying to.
Sometimes that kinda stuff happens when the flash gets screwed up, but should be easily recoverable.
this is what is on my sceen. I know this is a different device pictured. http://www.traemcneely.com/wp-content/uploads/2011/05/EXCLAMATION.jpg
Odin does not recognize the device when plugged iin. I did install drivers using heimdall for the samsung device.
smoggysasquatch said:
this is what is on my sceen. I know this is a different device pictured. http://www.traemcneely.com/wp-content/uploads/2011/05/EXCLAMATION.jpg
Odin does not recognize the device when plugged iin. I did install drivers using heimdall for the samsung device.
Click to expand...
Click to collapse
It's weird but once you install heimdall drivers you have to REINSTALL the drivers Odin uses, also it's best to use a different USB then the one setup for heimdall, but yes that is the "forced" download mode.
ok I'm making progress. I now have it out of the "Force download" mode. I flashed the stock "yp-f1cwyxaa" tar (device is a yp-g1cwyxaa) and now it just loops from samsung word to boot animation and repeats. What do I do now?
smoggysasquatch said:
ok I'm making progress. I now have it out of the "Force download" mode. I flashed the stock "yp-f1cwyxaa" tar (device is a yp-g1cwyxaa) and now it just loops from samsung word to boot animation and repeats. What do I do now?
Click to expand...
Click to collapse
OK, this can be kinda tricky, hold volume up and power till it shuts OFF, keep holding both buttons till it turns back on, then release just the power button, this should get you into the stock recovery, from there "wipe data/factory reset" and "clear cache" then reboot, it should boot up now. The tricky part is telling the difference between the bootloop starting over and the player powering off and back on.
Perfect... It works now. Thank you all for helping me with this. Damn, I'm glad to be born in this era where help is readily available. Thank You very much
Issue Resolved!
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Many people have your problem. I have my Lte verizon bricked as yours. The problem is demaged bootloader, only nvflash can fix it but actually our bootloader is locked and we need a hex key called sbk. At least we have to wait that somebody hack our tab from the basement. For now we can only search and share result.
pickupcash said:
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Click to expand...
Click to collapse
Did you solved the issue?
Please share ..., i face the same problem now ...
regards,
erwien.
Did you solved the issue.
share me......i face the same problem now
.
.
.
.
.
.
.
.
.
.
.
.
help me plz
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.