Hi All,
i am new to android i want to know if its possible to upgrade (kcc-cmm-sec-shwm250s) to android 4.0 or jelly bean.
currently my korean firmware is changed to gt-i9100 and running android 2.3.4 without any problem.
i want to upgrade it to jelly bean or ics (english) which gt-i9100 have
if its possible kindly share any guide...
Thanks in advance
hssn601 said:
Hi All,
i am new to android i want to know if its possible to upgrade (kcc-cmm-sec-shwm250s) to android 4.0 or jelly bean.
currently my korean firmware is changed to gt-i9100 and running android 2.3.4 without any problem.
i want to upgrade it to jelly bean or ics (english) which gt-i9100 have
if its possible kindly share any guide...
Thanks in advance
Click to expand...
Click to collapse
from a web i have found this method .. should i do this to my korean shwm250s converted to gt-i9100 ??? please help
How to Install Android 4.1.2 Jelly Bean Update on Galaxy S2 I9100 via XWLSS NeatROM
Step 1 - Download Android 4.1.2 XWLSS NeatROM for Galaxy S2 I9100 on the computer.
Step 2 - Connect and mount the phone's USB mass storage on computer with USB cable.
Step 3 - Without extracting, copy the downloaded XWLSS NeatROM zip file to the root folder on your phone's SD card.
Step 4 - Switch off the phone and disconnect its USB cable from computer.
Step 5 - Boot the device into Recovery Mode by pressing and holding Volume Up, Home and Power buttons together.
Step 6 - Once the device boots into CWM Recovery, perform a full data wipe task by choosing Wipe Data/Factory Reset. NOTE: Use Volume keys to navigate and Power button to select an option in the Recovery Mode.
Step 7 - Perform Wipe Cache Partition and wait until the process completes.
Step 8 - Once the process completes, perform Wipe Dalvik Cache as well. This will prevent intermittent boot loop issues and other ROM related errors. To do this, go to "advanced" option and then select Wipe Dalvik Cache in CWM recovery.
Step 9 - Return to the main recovery menu and choose Install Zip from SD card.
Step 10 - Click Choose Zip from SD card. Use volume keys to navigate to NeatROM zip file that you copied earlier to your phone's SD card and choose it by tapping the Power button. Confirm the ROM installation on next screen and the installation process will begin.
Step 11 - Once the ROM is installed, go to "+++++Go Back+++++" and hit Reboot System Now in the recovery menu. The phone will now reboot and the first boot might take about five minutes to complete. So, leave it alone.
Your Galaxy S2 I9100 is now running on Android 4.1.2 Jelly Bean based XWLSS NeatROM custom ROM. Go to Settings > About Phone to confirm the firmware version installed.
[Source: XDA Developers]
Related
Smile [Q] Uprading to 4.2.1 Galaxy S Vibrant
Hello,
I was following step by step how to installe 4.2.1 jelly bean on my Samsung Galaxy Vibrant.
androidjinn.com/install-android-4-2-1-jelly-bean-4.html
I am having errors rooting using Super One Click. Locking up and Not responding... or just starting the process and not finishing.... anyways, i used another program to root called GalaxyS_One-Click_Root_All_Models. It ran fine, and then I proceeded to complete steps.. I got as far as getting to actually install the ZIP files named gapps-jb-20121130-signed.zip and Hellybean-20121202-vibrantmtd.zip during recovery step at phone starting up using Volume up and down and holding the powerbutton on till 2nd reboot screen logo then let go.
Problem is from here i only get these options (i thought they should be new cuz of Root being used)
Reboot system now
reinstall packages
delete all user data
delete cache data
format internal sd card
Seems to me that I have completed steps 1 - 5 and there is no option for steps 6 and 7 which were data/factory reset or install zip from sdcard.
Then perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is completed. Select install zip from sdcard, then select choose zip from sdcard. Now, locate the Hellybean-20121202-vibrantmtd.zip file that you copied earlier in Step 2 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
This phone generally gets a little bogged down after some use.... no smooth screens , I would really like to have it running faster from this update.
If you suggest a newer version than 4.2.1 please let me know.. And I will download the different file... (just have to tellme which one to replace.)
Thank you so much, you guys are the best!!!
-Nathan
Firstly, you need to receive root and install clockworkmod recovery the you will process up rom step by step in here:
Pressing together to Volume Up + Ok button (or home button) + power button then Recovery Mode will appear. you need to wipe All everything such as: Wipe Cache, wipe data, wipe bettery...and now you chose on Install Zip from SD card and chose Rom you need to flash You can Download Here:
CyanogenMod 7 moded as ICS:
https://hotfile.com/dl/236593774/5c8ac0d/Simplicity_v3_final_edition_Eng.zip.html
This Rom Moded as Jelly Bean:
https://hotfile.com/dl/236594932/20...yanogenVietnam-AnDinh_For_S5830I_Eng.zip.html
And here is Stock Rom :
https://hotfile.com/dl/236594478/0673f3a/S5830iDXLD2_OLBLD1_DXLD1_CyanogenVietnam_AnDinh.rar.html
1) turn usb debugging on
2) run superoneclick and click root
3) go into janitor mode using power and DOWN volume from complete a shutdown
4) load odin and install YP-G70-Kernel-r14.tar - this installs CWM
5) from complete shutdown now hit power and UP volume to get into CWM
6) backup (optional), then do wipe of data, cache and advanced->dalvik
7) install Player5-RemICS-UX-EC0.zip rom from sd first then boot up into ti.
8) Shutdown, go back to CWM (like step 5) and then do cache wipe and advanced->dalvik again (no need for data wipe)
8) Then install cm-10.1-20130723-UNOFFICIAL-venturi.zip unoficial jb rom from sd card
9) install Mercurius_Reborn_RC1_usa.zip (allows capacitive touch to work on player 5.0)
10 reboot into os again, do whatever then shutdown back to CWM
10) install gapps-jb-20130301-signed.zip and then reboot and google will update itself
Reboot into Jelly Bean!
Make sure this is only for Player 5.0 USA
Instead of restarting, you could just flash Gapps after you flash the ROM.
Hi,
I'm new to this forum.
Seeking help from the expert.
Recently I have successfully upgrade my Galaxy Tab GT-P1000 to Jelly Bean 4.2.2
Then I help my friend to upgrade his.
However, I got stuck.
Below is the sequence I performed before I got stuck:
1. The Tab was on firmware 2.3.3 version
2. I root and install clockworkmod using CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS file.
3. I performed backup
4. Then I follow the instruction written in one of the site for upgrade to Jelly Bean 4.2.2 i.e. wipe data/factory reset and "wipe cache partition and wipe Dalvik cache.
5. Load CM10.1 Android 4.2.2 custom ROM
6. Then it reboot to Cyanogen but I had trouble to load google app package. tried a couple of time it went back to main menu.
7. This is when thing went wrong. I restore back from the back up I did earlier. Restore was successful but reboot and hang.
8. Then I powered off again. Restart using (power and volume +) then I've got error message such as
E: unknown volume for path [/system],
E: unknown process volume! Skipping...
E: unknown volume for path [/ data]
etc, etc...
Now the tab is unusable. Kindly advice how to proceed.
Thank you
Same problem occurred
nasattu said:
hi,
i'm new to this forum.
Seeking help from the expert.
Recently i have successfully upgrade my galaxy tab gt-p1000 to jelly bean 4.2.2
then i help my friend to upgrade his.
However, i got stuck.
Below is the sequence i performed before i got stuck:
1. The tab was on firmware 2.3.3 version
2. I root and install clockworkmod using cf-root-tab7_xx_oxa_jq1-v3.3-cwm3rfs file.
3. I performed backup
4. Then i follow the instruction written in one of the site for upgrade to jelly bean 4.2.2 i.e. Wipe data/factory reset and "wipe cache partition and wipe dalvik cache.
5. Load cm10.1 android 4.2.2 custom rom
6. Then it reboot to cyanogen but i had trouble to load google app package. Tried a couple of time it went back to main menu.
7. This is when thing went wrong. I restore back from the back up i did earlier. Restore was successful but reboot and hang.
8. Then i powered off again. Restart using (power and volume +) then i've got error message such as
e: Unknown volume for path [/system],
e: Unknown process volume! Skipping...
E: Unknown volume for path [/ data]
etc, etc...
Now the tab is unusable. Kindly advice how to proceed.
Thank you
Click to expand...
Click to collapse
same problem here just now!! Please kindly help us..
Nasattu said:
Hi,
I'm new to this forum.
Seeking help from the expert.
Recently I have successfully upgrade my Galaxy Tab GT-P1000 to Jelly Bean 4.2.2
Then I help my friend to upgrade his.
However, I got stuck.
Below is the sequence I performed before I got stuck:
1. The Tab was on firmware 2.3.3 version
2. I root and install clockworkmod using CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS file.
3. I performed backup
4. Then I follow the instruction written in one of the site for upgrade to Jelly Bean 4.2.2 i.e. wipe data/factory reset and "wipe cache partition and wipe Dalvik cache.
5. Load CM10.1 Android 4.2.2 custom ROM
6. Then it reboot to Cyanogen but I had trouble to load google app package. tried a couple of time it went back to main menu.
7. This is when thing went wrong. I restore back from the back up I did earlier. Restore was successful but reboot and hang.
8. Then I powered off again. Restart using (power and volume +) then I've got error message such as
E: unknown volume for path [/system],
E: unknown process volume! Skipping...
E: unknown volume for path [/ data]
etc, etc...
Now the tab is unusable. Kindly advice how to proceed.
Thank you
Click to expand...
Click to collapse
I attached herewith the picture so that you're clear with the problem I'm facing and give me the correct guide to resolve the matters.
Thank you
Hi!
I'm a owner of Samsung Galaxy S2, GT-i9100. I always installed a stock unbranded firmware. The last firmwares I installed using MobileOdin from phone. I'm not at advance user for flashing and modding the phone. I never do a wipe or something more advance. My phone is rooted, because MobileOdin allow that.
Now I would like to install the SuperNexus 4.0 - I9100 - Build 1 firmware. I thinks is I looking for a lite firmware with out bloatware and a update Android version.
Reading the post: http://forum.xda-developers.com/showthread.php?t=2583611 I have some doubts.
The instruction are:
Instructions:
First time installing SuperNexus 4.0 to your device, or coming from another ROM:
- Copy Google Apps and SuperNexus ROM into your internal SD Card
- Boot into Recovery (Volume up + Home + Power)
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Flash SuperNexus ROM
- Flash Google Apps package
- Reboot your device
It is possible to install the with MobileOdin this firmware?
If not, I have installed: Room Manager from play.google.com (Premium) for my phone, that is needit?
The flash SuperNexus ROM and Google Apps is at the same time?
Thanks in advance!
elrengo said:
Instructions:
First time installing SuperNexus 4.0 to your device, or coming from another ROM:
- Copy Google Apps and SuperNexus ROM into your internal SD Card
- Boot into Recovery (Volume up + Home + Power)
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Flash SuperNexus ROM
- Flash Google Apps package
- Reboot your device
It is possible to install the with MobileOdin this firmware?
If not, I have installed: Room Manager from play.google.com (Premium) for my phone, that is needit?
The flash SuperNexus ROM and Google Apps is at the same time?
Thanks in advance!
Click to expand...
Click to collapse
The instructions are quite simple and straight forward... Just follow it.. u dont e1 need a pc to flaash the rom into ur phone. Y try odin when u can do it with just the phone???
And Rom manager is not needed for this..
Turn the phone off first. And then boot(turn ur phone on) into recovery mode as mentioned in the instructions by keeping al 3 buttons(vol up + home + power) pressed..
ur phone then boots into recovery.. 'Wipe data and factory reset' option can b seen right ther.. Jus select it..
once done,
(u might hav to flash a kk supporting kernel b4 flashin the supernexus rom.. u can get this here.
Flash tn from ur sdcard by selecting 'install zip' option and selecting the kernel file. Once done, goto advanced->reboot recovery. Once it reboots,)
goto 'instal zip' again and select the supernexus rom zip file there and wait for it to complete flashing..
then goto advanced->wipe dalwik cache.
then flash gapps in a similar way and again wipe dalvik cache and then reboot system from main recovery menu.
Its quite simple!
all the best! :good:
^^^^
Good advice.
Also, OP - remove Rom Manager from your phone right now. Unless you'd like to end up with bootloop, busted recovery & possible data loss (caused by not doing backups & having to do a factory reset in order to fix your phone). Rom Manager does not play nice with the I9100.
Thanks! I installed with out issues the ROM. It's great. My major doubt was how to update de CWM.
Again, thanks!
I need to resolve the camera issue, http://forum.xda-developers.com/showthread.php?t=2583611&page=8, the message #73.
I try to delete o remplace the camera apk and is not possible. I am using ES File Explorer with root privilegies but I can rename, delete or copy to /system/apps directory.
I need to use other application?
thanks!
Supernexus 4 installation gone wrong on i9300
Hi
My i9300 was on CM10.2 and I tried to update it to Supernexus 4.0. I followed all steps but forgot to do a data wipe. Now my phone is unable to reboot. I am able to go to different modes using vol up, down and start and home button.
Please help.........SOS.
fanta182 said:
Hi
My i9300 was on CM10.2 and I tried to update it to Supernexus 4.0. I followed all steps but forgot to do a data wipe. Now my phone is unable to reboot. I am able to go to different modes using vol up, down and start and home button.
Please help.........SOS.
Click to expand...
Click to collapse
Reboot to recovery (Vol Up+ Home+Power) and wipe data.
Sent from my GT-I9100 using Tapatalk