hi, guys I updated my phone to 4.1.2 official and it wouldnt boot pass at&t logo. I tried flashing with odin but it sticks at cache.img or settingupconnection. I realised that when connecting my phone to the computer in download mode it connects as samsung modem. From what i read I need to change the phoneutil settings which you can usually access by dailing *#7284#. But I cant get the phone to fully boot. So is there another way that I can change the modem diagnostic setting to PDA? thanks if you can help
When in download mode nothing done from a booted os would have any effect.
You need to fix your drivers
Sent from my Galaxy Nexus
some progress
yeah I have installed and uninstalled drivers like a million times. I even tried kies. Also i got odin v3.07 to succesfully flash 4.1.2 UCMD8 and then i did a factory reset and clear cache but it would just bootloop. I have the device working on CM10.2 now. I had to sideload CWM with adb and restore one of the backups I had but the problem only my CM backup worked and not my shostock backup. I also tried flashing cooked 1.8 and 1.3 to get stock 4.1.2 but they both went black on bootup so I had to revert to CM again. I cant use the dialer codes for CM so i still cant access phone utilities to change usb modem.
edit. if i connect the usb in CM the computer recognizes and connects as MTP but in download mode it still connects as modem and not adb
Download mode should not be recognized as adb.
Sent from my Galaxy Nexus
Pirateghost said:
Download mode should not be recognized as adb.
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
ok what should it be in ? certainly not modem... right?
Jounin said:
ok what should it be in ? certainly not modem... right?
Click to expand...
Click to collapse
Its been a while since I hooked my gs2 up in download mode to a windows PC but it doesn't sound wrong.
Sent from my Galaxy Nexus
OK thanks... well I give up on the Odin part. I've tried CM9.1, CM0.1 and CM10.2 and all of them work just fine but when I install Samsung based roms all of them stick at boot animation. I then have to restore a backup of one of the CM roms. Any idea why that would happen ?
There have been multiple threads with people having issues with Odin v3 with our phone...have you tried v1.85?
Sent from my SGH-i777 using Tapatalk 4
DaveyBB said:
There have been multiple threads with people having issues with Odin v3 with our phone...have you tried v1.85?
Sent from my SGH-i777 using Tapatalk 4
Click to expand...
Click to collapse
Yes I have... I actually just tried flashing stock with Odin 1.85 and it flashed sucessfully but the rom still wouldnt boot... I tried factory reset and clear cache again but it just plays the at&t logo twice then the screen goes black for a couple seconds and replays the at&t logo. I managed to flash back to 4.0.3 using cwm. I want to sell the phone so I was just trying to install the lastest official rom first. I used kies to update at first but it wasnt recognizing the phone so i did a manual firmware upgrade through kies... Thats when i first got the bootloop on at&t logo. So i tried flashing with odin 3.07 and then 1.85 and still no go. I guess ill just leave it on 4.0.3 and it should get the update later.
Edit: oh I was able to change the UART from modem to PDA and use Odin to flash but that didn't work... When I flashed back to 4.0.3 it had changed back to modem so I don't know if the the flash is changing it back.
Screw Odin. Drop the drivers and use heimdall
Sent from my Galaxy Nexus
Related
hi
i am not unfamiliar with flashing using odin as i have flashed galaxy tabs and captivates.
i bought a used sg2 that has the triangle logo on the front and appears rooted and is unlocked.
i have done a factory wipe/restore thru cwm and fixed permissions.
i am trying to flash the kh3 modem to improve gps which is dismal to say the least.
i have kies installed and odin detects the s2 fine with the yellow comport.
am using odin 1.85 with no pit and the modem bin.
odin never completes and never gives an error.
the phone is in download mode with usb debugging enabled in android.
any ideas on this?
i have tried 2 different winxp computers and both exhibit the same problem with odin.
also is there anyway to get back to stock without odin if i cant get this to work.
thanks
kernal version [email protected]#2
kbg1 said:
hi
i am not unfamiliar with flashing using odin as i have flashed galaxy tabs and captivates.
i bought a used sg2 that has the triangle logo on the front and appears rooted and is unlocked.
i have done a factory wipe/restore thru cwm and fixed permissions.
i am trying to flash the kh3 modem to improve gps which is dismal to say the least.
i have kies installed and odin detects the s2 fine with the yellow comport.
am using odin 1.85 with no pit and the modem bin.
odin never completes and never gives an error.
the phone is in download mode with usb debugging enabled in android.
any ideas on this?
i have tried 2 different winxp computers and both exhibit the same problem with odin.
also is there anyway to get back to stock without odin if i cant get this to work.
thanks
Click to expand...
Click to collapse
have you tried flashing the modem through clockworkmod. That might be easier.
Sent from my GT-I9100 using Tapatalk
hi
always used odin,not familiar with clockwork mod although it is on the phone.
where would you put the modem.bin or modem.tar?
phone sd storage or external sd storage?
thanks
i have put more info in my op regards to kernal.
I would turn off usb debugging .
Stop Kies from running via task manager .
Download modem file from modem thread make sure its an ODIN flash able file not CWM as that wont flash via Odin .
http://forum.xda-developers.com/showthread.php?t=1131950
Open Odin put file to PHONE
phone to download mode
Connect Samsung cable
Flash
If it fails retry with file in PDA instead of phone .
Fails from same thread try a modem for CWM flash via CWM .
jje
hi
managed to flash back to the complete stock bell firmware.(triange gone)
rooted using cf flash k2 kernel.(triangle back)
have superuser and root.
it has to be the modem file is not for use with odin.
i will try again with odin compatible file and report back
thanks,jeff
hi
that was it,not in proper format for odin.
trouble is that modem still takes a long time to lock.
finds lots of sats(8)but no lock for at least 5 mins.
any fix for that?
i might try another modem first though
thanks for all the help
kbg1 said:
hi
that was it,not in proper format for odin.
trouble is that modem still takes a long time to lock.
finds lots of sats(8)but no lock for at least 5 mins.
any fix for that?
i might try another modem first though
thanks for all the help
Click to expand...
Click to collapse
There are a couple of GPS fix posts around dont remeber names but there are not many GPS posts to search .
re GPS.Conf and other stuff to enable a quicker lock .
I use GPS Status from the market to update A-GPS for initial lock on .
jje
Hi!
After flashing my stock Gingerbread rom to CM9 (through CWmod) I decided I wanted to switch to a more stable ICS rom (was running an old version of CM9). This time I tried to use odin and got a fail (NAND), giving me the "Connect to kies" screen. Unable to get into recovery, but can get into download.
So after this I tried flashing a few kernels (after failing to use the softbrick recovery method on this forum), all of which passed and left me at the Samsung splash screen (still unable to get to recovery). I then tried flashing Siyah and lo and behold it allowed me to get into recovery, prompting me to flash FoxHound via zip (one of the only .zip roms I could find). After this I tried to use ODIN again, only to have it fail on me again. This time siyah would not even work, and after trying many other kernels (all of them saying they had passed) a earlier version of siyah worked, and I am now running the FoxHound rom that was on there.
I would quite like to go back to the official Gingerbread rom and then update through KIES, can anybody shed some light on whats happening? Do I have a NAND corruption even though I am able to use the phone at the moment with foxhound? If I wanted to put Gingerbread back on will ODIN play nice?
Thanks!
P.S. Did all the usual of using different cables and making sure kies is not running whatsoever!
OldJamaica said:
Hi!
After flashing my stock Gingerbread rom to CM9 (through CWmod) I decided I wanted to switch to a more stable ICS rom (was running an old version of CM9). This time I tried to use odin and got a fail (NAND), giving me the "Connect to kies" screen. Unable to get into recovery, but can get into download.
So after this I tried flashing a few kernels (after failing to use the softbrick recovery method on this forum), all of which passed and left me at the Samsung splash screen (still unable to get to recovery). I then tried flashing Siyah and lo and behold it allowed me to get into recovery, prompting me to flash FoxHound via zip (one of the only .zip roms I could find). After this I tried to use ODIN again, only to have it fail on me again. This time siyah would not even work, and after trying many other kernels (all of them saying they had passed) a earlier version of siyah worked, and I am now running the FoxHound rom that was on there.
I would quite like to go back to the official Gingerbread rom and then update through KIES, can anybody shed some light on whats happening? Do I have a NAND corruption even though I am able to use the phone at the moment with foxhound? If I wanted to put Gingerbread back on will ODIN play nice?
Thanks!
P.S. Did all the usual of using different cables and making sure kies is not running whatsoever!
Click to expand...
Click to collapse
Just download an official Gingerbread Firmware from Samfirmware and flash it through Odin. It should work. You will then loose CWM and Root of course but after that you should get updates via Kies.
And do not check Re-Partition in Odin when it`s not a 3 part Firmware.
Maybe try mobile odin pro-that eliminates ALL pc problems.
Sent from my GT-I9100 using xda premium
theunderling said:
Maybe try mobile odin pro-that eliminates ALL pc problems.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Worked like a damn charm! Thanks!
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Hi Marcus,
I had the same problem few days back.
If it's not broken by you trying something fancy, the best solution is to take it to service centre. If you have rooted your device, had installed some custom firmware or are not willing to visit the service centre for some other reason, please read ahead.
All I did was,
Installed USB connectivity drivers through Kies.
Installed ODIN 1.83
Ensured that Kies or any of its processes are not running in background.
Downloaded the official SGS2 firmware
Flashed the firmware through ODIN.
It took around 10 minutes for the full process and I was having my mobile up and running. Using ODIN sounds scary initially if you haven't used it. I have slowly started gaining confidence in it after using it a few times.
Please note that though the process is well proven to be safe, there is still an amount of risk involved.
Sent from my GT-I9100
Download a siyah kernel(like v4.0.1) .tar file and flash through odin.
See if that makes it boot/lets you into recovery.
Adarzannh said:
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I appreciate all of your answers!
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
<ID:0/003> NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
mananbdesai: where do I find the "official SGS2 firmware"?
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
marlu873 said:
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
Click to expand...
Click to collapse
A couple of things..ensure KIES is not running on your computer in the background. If possible delete it completely. Also ensure your phone is connected to a USB port directly on the computer and not via a hub or to a USB port on a keyboard or something. Odin is a finicky s/w..so..
Also, try different versions. If v1.85 doesn't work try v3.4
marlu873 said:
mananbdesai: where do I find the "official SGS2 firmware"?
Click to expand...
Click to collapse
Go to sammobile.com or a sticky in the Original Android Development section here..has links to all the stock firmwares.
marlu873 said:
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
Click to expand...
Click to collapse
Lol at underlining. if you flash a custom kernel like siyah, you'll be rooted and get CWM. Using that you can install a custom ROM.
Sent from my GT-I9100 using xda app-developers app
And youll be safe from the 4.0.4 brickbug if you flash siyah.
You flash a kernel for various reasons like it has emmc cap disabled,you can tweak it etc.
You can flash siyah kernel and stop there.Or you can move onto a custom rom.
Whatever,when its done-backup your efs and make a nand backup.
And yesterday I was downgrading my wifes phone onto 4.0.3.I was using odin and kept getting "failed".After 3 attempts I realised I hadnt put the phone into download mode..........how stupids that......lol
hi there, just wondering, after Flashing the stock firmware through ODIN, do you lose everything in your phone? i need to get all the notes that I have in my phone (notes from the samsung stock apps). I dont have any external sd card in the phone. thanks in advance for the reply.
enquiry
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Hi there sir,
Has the problem solved ? Care to share the solution ?
Thanks.
i had the same exact problem, i tried flashing with odin n stock firmware but stuck in NAND write start, i didnt try flashing with PIT & repartition though, i couldnt be bothered anymore, so i took it to samsung service plaza, they told me the problem is in the main PCB (hardware issue), so all they did was replace that n it got fixed! i didnt pay because it's still under contract/ carrier warranty
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
it seems for some strange reason the phone wont turn on now. Wheni plug it in i get the blue flashing dot but its faint. Tried download mode and nothing.
same problem
araz.rozh said:
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
my phone is stuck at the bootlogo too. but mine is rooted n running on biftor rom (jellybean) pls how do i flash with odin? thanks
help pls.
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
tatchero said:
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
Click to expand...
Click to collapse
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Flash-IS-Bright said:
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Click to expand...
Click to collapse
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
peshmann said:
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
Click to expand...
Click to collapse
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Sun90 said:
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Click to expand...
Click to collapse
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
peshmann said:
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
Click to expand...
Click to collapse
You could try flashing hawkerpaul's kernel wiper first and then install another stock kernel like PhilZ or Apollo, and see if that helps.
Neat Rom lite,suddenly struck in boot loop after 1 month of operation.
Dear All,
I have installed the "I9100XWLSZ_NeatROM_Lite_v5.0.1" custom rom and after 1 month of successful usage, today suddenly the phone was dead.(probably due to autoupdates over wifi) . I tried to reboot, but didnt. Tried to restart but got stuck in the logo screen with yellow triangle.
Tried to enter recovery mode, but no use. Only download mode is possible.
Tried to flash the stock rom using odin, but no use, Nand write failed.
Can somebody help me how to come out of this situation. Shall I install a different kernal and see?
Regards,
Maka11
So, I was on 4.1.2 (running CM 11), and I downloaded the toltevzw_mj9_official_firmware1.tar.md5 and Odin 3.07.
I loaded the toltevzw_mj9_official_firmware1.tar.md5 into the PDA section of ODIN, and booted into download mode.
I ran Odin, and it seemed to work--restarted, Odin said it was successful, but now I have no cellular service and my Baseband Version is "unknown".
I've tried this multiple times, with different computers and different cords. I even flashed back to stock to get the modem back, then tried again. Same result.
Am I using ODIN wrong? Can anyone help me? Please? I have searched these forums, but every thread I found was unhelpful.
Thank you.
beans3660 said:
So, I was on 4.1.2 (running CM 11), and I downloaded the toltevzw_mj9_official_firmware1.tar.md5 and Odin 3.07.
I loaded the toltevzw_mj9_official_firmware1.tar.md5 into the PDA section of ODIN, and booted into download mode.
I ran Odin, and it seemed to work--restarted, Odin said it was successful, but now I have no cellular service and my Baseband Version is "unknown".
I've tried this multiple times, with different computers and different cords. I even flashed back to stock to get the modem back, then tried again. Same result.
Am I using ODIN wrong? Can anyone help me? Please? I have searched these forums, but every thread I found was unhelpful.
Thank you.
Click to expand...
Click to collapse
What I have found to help me and not run into this issue is flash back to stock, and re-root using the causal tool. Then I would install the lastest CWM or TWRP, install 4.3TW rom, boot up, reboot back into download mode, run odin package of the firmware (make sure you have a good md5, a bad download can affect it accepting the upgraded firmware), then wipe data,cache, dalvik and reboot. Then once rebooted confirm your modem was accepted and working, then get a GPS lock, then upgrade to CM11 if thats what you prefer.
bigmike35 said:
What I have found to help me and not run into this issue is flash back to stock, and re-root using the causal tool. Then I would install the lastest CWM or TWRP, install 4.3TW rom, boot up, reboot back into download mode, run odin package of the firmware (make sure you have a good md5, a bad download can affect it accepting the upgraded firmware), then wipe data,cache, dalvik and reboot. Then once rebooted confirm your modem was accepted and working, then get a GPS lock, then upgrade to CM11 if thats what you prefer.
Click to expand...
Click to collapse
So I did most of this, installed Alliance Rom. Now, ODIN won't recognize my device when it is in download mode. It will recognize it when I boot up normally, however. Yet, as soon as I boot into download mode, nothing.
Why is this such a pain in the ass for me? I haven't seen anyone have this much trouble.
beans3660 said:
So I did most of this, installed Alliance Rom. Now, ODIN won't recognize my device when it is in download mode. It will recognize it when I boot up normally, however. Yet, as soon as I boot into download mode, nothing.
Why is this such a pain in the ass for me? I haven't seen anyone have this much trouble.
Click to expand...
Click to collapse
That is a common problem, no worries man.
You need to go into device manager and delete/uninstall the casual/Samsung driver. Look under android development, then droid style, a sticky thread which shows you to delete driver. When you do that, that should do the trick for you!
Thank you bigmike35, so much. Everything you said worked.
To anyone else with this problem, try installing a 4.3 rom first before the mJ9. I wasted hours and hours by not doing this.
beans3660 said:
Thank you bigmike35, so much. Everything you said worked.
To anyone else with this problem, try installing a 4.3 rom first before the mJ9. I wasted hours and hours by not doing this.
Click to expand...
Click to collapse
Can you post a Link to this 4.3 Rom? or even the Rom name? thanks
I Think Its time to make a thread after 3 weeks of searching for fixes.
Okay, so I flashed this ROM 'Extrimis Rom'. It worked. 2 days using. After that, I flashed CM7.2 slim. Worked, No errors, Then ai plugged my Phone to my Laptop, It says USB not recognized. I Cant even flash stock using Odin.
Fixes Tried:
Pull the Battery before Odin.
Install/Update Kies
Tried several PCs with Kies and Adb drivers
Flashed System multi formatter.
I really need to fix this, else I wont be able to flash CM11, coz it needs Odin to go back to stock rfs.
eiPeiDweP said:
I Think Its time to make a thread after 3 weeks of searching for fixes.
Okay, so I flashed this ROM 'Extrimis Rom'. It worked. 2 days using. After that, I flashed CM7.2 slim. Worked, No errors, Then ai plugged my Phone to my Laptop, It says USB not recognized. I Cant even flash stock using Odin.
Fixes Tried:
Pull the Battery before Odin.
Install/Update Kies
Tried several PCs with Kies and Adb drivers
Flashed System multi formatter.
I really need to fix this, else I wont be able to flash CM11, coz it needs Odin to go back to stock rfs.
Click to expand...
Click to collapse
If you tried reinstalling drivers then do wipe data /cache of your Phone then tick on USB debug then connect it to PC & wait for some time windows will Automatically detect them but make sure that you should remove all drivers which are already installed
If the above method didn't work then install PDA net drivers they will work 100% sure.
eiPeiDweP said:
I Think Its time to make a thread after 3 weeks of searching for fixes.
Okay, so I flashed this ROM 'Extrimis Rom'. It worked. 2 days using. After that, I flashed CM7.2 slim. Worked, No errors, Then ai plugged my Phone to my Laptop, It says USB not recognized. I Cant even flash stock using Odin.
Fixes Tried:
Pull the Battery before Odin.
Install/Update Kies
Tried several PCs with Kies and Adb drivers
Flashed System multi formatter.
I really need to fix this, else I wont be able to flash CM11, coz it needs Odin to go back to stock rfs.
Click to expand...
Click to collapse
No need to go to stock for flash cm 11..first try to flash cm11 if it not boot then try to flash stock rom with odin..
Ill try it!,
Hitesh2626 said:
If you tried reinstalling drivers then do wipe data /cache of your Phone then tick on USB debug then connect it to PC & wait for some time windows will Automatically detect them but make sure that you should remove all drivers which are already installed
If the above method didn't work then install PDA net drivers they will work 100% sure.
Click to expand...
Click to collapse
It kinda worked sometimes, but in download mode, not at all.Thanks BTW.
any more fixes?
eiPeiDweP said:
It kinda worked sometimes, but in download mode, not at all.Thanks BTW.
any more fixes?
Click to expand...
Click to collapse
It will work give some time to PC to download all drivers check in Task Bar in icons , it will show you how much it has downloaded .
Hitesh2626 said:
It will work give some time to PC to download all drivers check in Task Bar in icons , it will show you how much it has downloaded .
Click to expand...
Click to collapse
It's not even downloading. There's no such thing in the taskbar, I think this is unfixable :F. Is there anyway to revert to stock from CM11 without Odin?
eiPeiDweP said:
It's not even downloading. There's no such thing in the taskbar, I think this is unfixable :F. Is there anyway to revert to stock from CM11 without Odin?
Click to expand...
Click to collapse
Do you have internet to PC ?
Check whether the drivers are completely uninstalled and then connect your phone without in download mode .
And have you tried PDA net drivers ?
Hitesh2626 said:
Do you have internet to PC ?
Check whether the drivers are completely uninstalled and then connect your phone without in download mode .
And have you tried PDA net drivers ?
Click to expand...
Click to collapse
Yeah, I have Internet. Kies is COMPLETELY uninstalled, and yeah I have tried PDAnet Drivers. PDAnet works sometimes (already mentioned) .
Sent from my GT-S5830i using XDA Premium 4 mobile app