Hello Everyone,
I just tried to Moonshine to turn S-OFF, but at second boot it failed, HTC MTP drivers didn't install, I updated all the necessary drivers and fastboot was also before starting the process, now my phone won't boot past first screen, I cannot turn off, I can't go to bootloader or recovery, I try to Moonshine Disterllier , but keeps giving me error "Run Disteller again and READ". its is unlocked, How can i Fix this ?
Fixed it, Just wait for the battery to drain, next reboot it boots normally
Hi. Can you tell me please where did you find the drivers and fastbbot for thr 802w?
Thx.
Related
Hi everyone, firstly, sorry about my english.
I have a problem with my new Hero.I made wrong spl flash.. After flash, phone resets in 5 seconds, open, htc logo,34 second waits and restars. Later,i try the offical rom. But this time i see CID error, goldcard needed, and adb. I think, the big problem adb, it's cant connect my phone,nothing found. I install full adroid sdk ( 2 gb with updates), htc synch, and drivers ( its appears "android phone-my hero" at management console in win7). With fastboot, i take serial number, in htc rom not usb error, but adb makes connection, where am i doing wrong? In phone screen, there is chip in red cross.Please help...
im little moving forward, i send amon-ra recovery image with fastboot, it is works, but cant flash, when i try flash,its show FAILED (remote: 12 signature verify fail).. what am i do...
I fix it, finally. Firstly send a recovery rom with fastboot, phone reboots with recovery rom, in this positin adb see the phone, i make goldcart and install the orginal rom. Thanks to world biggest forum.
//Header information
***UNLOCKED***
SHOOTER XC SHIP S-ON RL
HBOOT-1.50.0000
eMMC-boot
Hey guys, I recently acquired an EVO 3D in a trade deal and even though I don't want it (I plan on selling it but the cash deal + EVO 3D was worthy), I ended up being hellbent on rooting it last night. Success. Great, I threw Cyanogenmod7 on there and realized I'll have to undo the root/ROM to sell it later. I used what I believe is referred to as the REVOLUTIONARY method (using HTCDev.com, some terminal commands on my Mac, etc.)
Anyhow, didn't think it would be hard to undo what I did and I guess I was wrong. Let me tell you what I've tried so far.
I've tried using the PG86IMG.zip flash and nothing. No option (VOL UP or VOL DOWN) to even TRY installing it. Just quickly flashes the green text "No Image!" under each category (it goes too fast for me to read it) and I'm back at the boot menu. I've tried using different copies of the PG86IMG.zip with the same results (latest site acquired from: Goo-inside me, or something like that).
I've also tried using the RUU*.exe method on a Windows 7 machine. I've installed the drivers, everything checks out just fine until it actually tried to update the ROM. What happens here is that the phone reboots (as expected) and though the splash screen is different (black background with silver/gray hTc logo, semi-reflected) from the usual splash screen (white background with hTc in green), nothing happens. The software on the Windows 7 machine says "Waiting for bootloader" - which never shows up. Then it quickly gives me an error stating that the USB cable between the PC and the phone needs to be checked. Of course, there's no disconnect anywhere in the cables.
Please help! I planned on selling this device but if it's stuck in Cyanogenmod7, especially with no Google apps (couldn't get Gapps*.zip to work but whatever, not really concerned about that right now), there's no way I could sell this thing. I'm fairly knowledgeable in the basics of these matters as I have a rooted EVO 4G as well.
Anyone wanna buy an EVO 3D? HAHA
you could always flash a stock rooted rom .
You've gotta relock through adb before running the RUU.exe; then it'll work.
Hit the thanks if I helped
Here's another problem: I can't get back into Clockwork Mod Recovery (so I don't know how to flash another ROM on there). If I hold VOL DOWN while powering up, it starts automatically loading PG86IMG.zip. Then I get the options FASTBOOT, RECOVERY, FACTORY RESET, SIM LOCK, and IMAGE CRC.
Trying to enter recovery reboots to the splash screen and it gets stuck there.
How would I lock it using ADB?
zer0xity said:
Here's another problem: I can't get back into Clockwork Mod Recovery (so I don't know how to flash another ROM on there). If I hold VOL DOWN while powering up, it starts automatically loading PG86IMG.zip. Then I get the options FASTBOOT, RECOVERY, FACTORY RESET, SIM LOCK, and IMAGE CRC.
Trying to enter recovery reboots to the splash screen and it gets stuck there.
How would I lock it using ADB?
Click to expand...
Click to collapse
It's because of the pg86img.zip you can delete/move it away from the root of your sd card and get back into recovery... but you shouldn't need to, follow these steps:
1) Turn off phone
2) Hold power+vol down
3) Choose fastboot
4) Plug into your PC if you're not already
5) When you see FASTBOOT USB on the phone screen go back to your command prompt where you have your adb.exe, fastboot.exe, etc.
6) Type: " fastboot oem lock "
7) Aaaand you're done w/ the relocking go crazy and run your RUU.exe, don't reboot the phone or anything just run your RUU while your phone's still in HBOOT.
Edit: Oh, the adb I was talking about would kind of make everything easier; in command prompt: adb reboot bootloader AND THEN fastboot oem lock
Two steps, mhm.
I'm on it! Standby...
Okay, the adb stuff - can I do that from terminal in Mac? I tried doing it while in the appropriate folder where all that adb stuff is and I typed: adb reboot bootloader (ERROR: command not found), then I tried just: reboot bootloader (not permitted). I did try: ./fastboot-mac oem lock (successful. header now says *** RELOCKED ***).
Tried the RUU*.exe stuff on the Windows machine while in that state and again an alleged problem with the USB connection...
Sounds like we're close?
BAM! Got it. You put me on the right track with that last post. RUU still wouldn't do the reversion even though I had some drivers installed on Windows so I had to find some other drivers (some HTC3*.exe file, 13MB) and ended up running those for it to recognize the phone.
+1 to you, sir. Thank you so much!
Glad it all turned out well.
I pretty much screwed my phone so bad, and I can't seem to the find any solution anywhere...
Here's what I did in order:
-tried rooting it with this guy's guide [link taken down since im a new member, but it's on htconeroot dot com//htc-one-root/how-to-root-htc-one-windowsmaclinux/]
[keep in mind it's S-On with HBoot 1.55]
-found out TWRP wasn't updated so I replaced it with a newer one (2.6.3)
-now rooted device
-wanted to restore to normal stock settings so I downloaded the Guru Reset M7 1.26.502.15 and put it in my root folder
-went to recovery to install the guru reset ZIP
-things install, but touch screen doesn't work
problems now:
-can't turn off phone on main screen (tried holding down power, but doesn't restart phone past the 3 second mark)
-can't boot into bootloader from restart
-ruu doesn't work
can anyone provide me with help? please and thank you
EDIT: few things to keep in mind
-everytime i use RUU 3.17.502.3, it loads up black screen with HTC logo int he middle, then I can turn off the phone.
-when loading up, i can load into bootloader
-when choosing recovery/factory reset, it brings up the software update screen, but then goes to red triangle
-at red triangle screen, i can reboot system through android recovery system.
-back at square 1, touch screen doesn't work, etc.
All I can say is that I am in the same waters, phone stuck in bootloop, or goes to triangle of death, and PC WILL NOT recognize phone at all so without driver support, I am screwed too.
Added: All I did was unlock through HTCDev, and all hell broke loose, loaded up AIO, and phone freaked upon flashing TWRP. 1.55 HBoot, 4.3 ATT update.
hack14u said:
All I can say is that I am in the same waters, phone stuck in bootloop, or goes to triangle of death, and PC WILL NOT recognize phone at all so without driver support, I am screwed too.
Added: All I did was unlock through HTCDev, and all hell broke loose, loaded up AIO, and phone freaked upon flashing TWRP. 1.55 HBoot, 4.3 ATT update.
Click to expand...
Click to collapse
Here's a solution:
-get into bootloader mode
-fastboot
-plug usb in
-open cmd, then get to where your HTC One rooting stuff is (for example, everything was in a folder on my desktop)
-type "fastboot oem lock"
-your phone should say "relocked"
-open the latest RUU you have
-run things normally
that's how i fixed mine, lemme know if you have any more questions.
i also don't know why your phone has to be "relocked" in order to update it's software.
pztrixwsup said:
Here's a solution:
-get into bootloader mode
-fastboot
-plug usb in
-open cmd, then get to where your HTC One rooting stuff is (for example, everything was in a folder on my desktop)
-type "fastboot oem lock"
-your phone should say "relocked"
-open the latest RUU you have
-run things normally
that's how i fixed mine, lemme know if you have any more questions.
i also don't know why your phone has to be "relocked" in order to update it's software.
Click to expand...
Click to collapse
A thousand thanks, you are my new hero! And if you run the RUU, then go back and re-unlock the bootloader, it only says "unlocked" not tampered.
That's why we need to wait for the issue with Rumrunner S-off for our phones to get squared away. So we can flash other carrier or older software.
---------- Post added at 06:51 PM ---------- Previous post was at 06:40 PM ----------
Has anybody had success with Rumrunner for 3.17.502.3 yet? I have been hitting a wall and am not the only one. The phone is freezing on adb at test 2.1. We have tried flashing the RUU and doing it again, but it fails every time in the same way.
Here's what I get:
Code:
!! Do NOT for any reason taunt, unplug, drop, eat or pet your device !!
Please wait....
..........
Checking for updates......
Test 1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
[PN0712000-1.55.0000]
Test 2 (ALT): Booting device
Rebooting from fastboot
Waiting for ADB (22/120)
Test 2.1: Rebooting into bootloader
Waiting for fastboot (7/120)
Waiting
Waiting for ADB (120/120)
ADB connection failed!!
FIX IT, yes, YOU fix it no!!!FIX IT NOW!!!!!
Reboot command failed!!
Bootloader unlock failed?
Press ENTER to exit
Specifically looking for somebody with 3.17.502.3 to chime in if they've tried it, or one of the most awesome devs that work tirelessly so we common folk may find new ways to nearly-brick our phones :silly:
hack14u said:
A thousand thanks, you are my new hero! And if you run the RUU, then go back and re-unlock the bootloader, it only says "unlocked" not tampered.
Click to expand...
Click to collapse
Yea no problem bro, i was in your position for the whole day and i stumbled upon a billion sites and eventually trial and error'd the whole way through
Check the discussion in other thread about 4.3 and s-off. We have tried quite a few different things with no luck so far. I even posted in HTC one forums in the support thread. Hoping they will release something soon for our hboot 155.
Sent from my HTC One using xda app-developers app
I'm new to rooting and all of this type of thing, i figured I would first start with my HTC Flyer. I successfully unlocked the bootloader, and installed SuperUser, upon installing greenify and i tried to install the Xposed Framework, and my device now is stuck in a boot loop.
When enter the bootloader and do a factory reset or try to enter factory it completely freezes, and when i try to connect it to my PC via fastboot the PC says that the USB device that is connected cannot be recognized and fastboot will not work. Did i completely fry this device? Also if you have time I couldnt figure out a proper way to flash a custom rom so if anyone has a guide for that I would appreciate a link to that as well.
Thank you so much!!
my evo came with an old software and firmware ...i rooted it then made two official updates yesterday after rooted and lost root.
today i made the s-off with Moonshine but after made s-off root still was not working
What moonshine can do for you
S-OFF Your HTC device if it is a supported model and firmware
Unlock your bootloader (devices that are blocked by HTCDEV.com)
Install moonshine hboot. This is a customized hboot with many eng-style commands.
Install su binary
Install Superuser.apk
Install busybox
Install an unsecure stock kernel
so decided to flash the TWRP recovery and do it by me........i flashed the TWRP by fastboot command and i selected reboot bootloader option......
then i selected boot loader and selected recovery but the phone was on htc quietly brilliant for a minute +- and after the phone booted in so..
after it i tried many times to get in hboot and the phone just dont show anything in the screen,,,,
my phone is conected and chargiing when i try to hboot the led stays on even though i disconect the usb....
i tried with fastboot option enabled and disabled.
now i noticed that i cant connect the phone in usb.... mi pc says that does´t reconize the divece...adb dont work too
excuse my english....if dont understand something just say it,,,
please someone help me
False alarm:laugh: the problem is my laptop just temporaly broke the touch of every smathphone conected and now this