Hi everyone, firstly, sorry about my english.
I have a problem with my new Hero.I made wrong spl flash.. After flash, phone resets in 5 seconds, open, htc logo,34 second waits and restars. Later,i try the offical rom. But this time i see CID error, goldcard needed, and adb. I think, the big problem adb, it's cant connect my phone,nothing found. I install full adroid sdk ( 2 gb with updates), htc synch, and drivers ( its appears "android phone-my hero" at management console in win7). With fastboot, i take serial number, in htc rom not usb error, but adb makes connection, where am i doing wrong? In phone screen, there is chip in red cross.Please help...
im little moving forward, i send amon-ra recovery image with fastboot, it is works, but cant flash, when i try flash,its show FAILED (remote: 12 signature verify fail).. what am i do...
I fix it, finally. Firstly send a recovery rom with fastboot, phone reboots with recovery rom, in this positin adb see the phone, i make goldcart and install the orginal rom. Thanks to world biggest forum.
Related
Hello Everyone,
I just tried to Moonshine to turn S-OFF, but at second boot it failed, HTC MTP drivers didn't install, I updated all the necessary drivers and fastboot was also before starting the process, now my phone won't boot past first screen, I cannot turn off, I can't go to bootloader or recovery, I try to Moonshine Disterllier , but keeps giving me error "Run Disteller again and READ". its is unlocked, How can i Fix this ?
Fixed it, Just wait for the battery to drain, next reboot it boots normally
Hi. Can you tell me please where did you find the drivers and fastbbot for thr 802w?
Thx.
Hi all,
So, I done effed up. I've been running Elegancia with no problems for a while now, and decided off the cuff to try something new. Long story short, I didn't read properly and ended up flashing an International ROM to my phone by accident. No problem, I think, I'll just ADB sideload Elegancia again.
I boot into TWRP recovery and then find that my computer no longer recognizes my phone. So, I hit restore on TWRP, and restore a backup that I'd made beforehand. After everything finishes restoring, I discover to my dismay that the backup did not include my OS.
Now, when I power up my phone, I can boot only into bootloader. When I try to boot into recovery, the phone is stuck on the TeamWin logo and doesn't move. If I turn on the phone without booting into bootloader, I'm stuck on HTC's logo. My primary goal right now is just
In conclusion, I have no idea what to do with the following problems:
1. When booting into bootloader, my computer no longer recognizes my device, so I have trouble flashing TWRP. Basically, my computer searches for an HTC MTP driver, and then fails to find one/install one. When I try to update the driver manually by downloading a MTP driver and then installing via Device Manager, Windows tells me I'm already using the most up-to-date version.
2. When booting into bootloader and then going to Recovery, my phone will boot into teamwin's logo ... and then not move from there.
I'm aware that I've screwed up pretty bad-- I've done my best to read stuff that's relevant, though. I'd love more help, please! Thanks in advance. Lots of invisible cookies coming your way.
[EDIT: It turns out TWRP was just taking a really, really, really long time to load. That said, my problem now is this:
- When going to Advanced -> ADB Sideload, my computer does not recognize my device when using adb devices.
How can I make sure that this actually works? Thanks again!]
[EDIT #2: Okay, um, I don't know why, but for some reason my computer now lists my device after going into sideload from TWRP. Maybe something to do with a reboot of my computer. If that's true, I feel really stupid. Will update if sideload doesn't work ... I think the cosmic gods are laughing at me. I guess all I had to do was post in xda-developers so that I could publicly embarrass myself before I fix my phone.]
[EDIT #3: Everything works and I'm dumb.]
Hi!
First off let me say thanks to R_a_z_v_a_n for redirecting me and hope that I'll find my answer here ^^
So I Have this device called HP 7 VoiceTab 1321RA (not with Slate just HP 7 Voicetab), wanting to have a custom recovery then I tried to flash a CWM Custom Recovery for HP Slate 7 VoiceTab because I thought it was the same and ends up bricking my phone. It ends up in a bootloop which only shows HP sign for a few seconds and dead. But I managed to find out that I can access the recovery menu (or so I thought it is), but the options was choosing between Fastboot Mode, Normal Boot, Recovery Mode, and VART Mode.
I tried to enter Fastboot Mode before and tried to access it via PC but somehow I can't find the device by entering adb devices and fastboot devices. Anyways, I have downloaded a stock update.zip for it but not the original KitKat one which I get from the first time I bought it but rather the JB ones. I think by flashing this would help me recover the device but the only problem is I don't know which method should I use to Flash it. Since I don't have the Stock Recovery or ANY kind of recovery at all, I guess I'm stuck. And it won't start to the home page so I can't set the USB debugging options. Please guide me through this >.<
Thanks a lot!
Been fighting with it for 2 days now and still no result came.
So here's the update so far....
I tried on my other device in order to understand how my PC reads ADB and now I kinda gets it. But the problem is now can't get the device to enable USB Debugging because I can't access options at all.
Secondly, since I left it on for the night because charging seems to trigger the bootloop too, now I can't access the fastboot mode like I was last night. And it constantly repeating this sequence: [battery scene with the "charging battery" symbol] > [HP Powered by Android screen] repeated for 2-3 times > [low battery need charging screen] > repeat. And once I tried to connect to the PC, it goes to the same sequence too. When I tried to access the boot options (the screen which displays Fastboot Mode, Normal Boot, Recovery Mode, and UART Mode which I mention in Thread Starting post), it shows the low battery need charging scene and then repeating the same sequence as mentioned above.
I seem to figure out how to fix this but I still can't manage to access the fastboot mode yet. Will give update once I can try to.
Anyone can help me on this?
Thanks a lot!
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
I found my self in a deadlock!
PLEASE HELP :crying:
Could you unbrick yours
What service centre says about that problem i also ran in this problrm but i m trying to go to service centre for that
first off install drivers in your PC as admin
then use the official flashtool to flash ur stock firmware by entering fastboot or flashmode simple as that
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
jithinraj said:
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
Click to expand...
Click to collapse
Dude urs is a mtk device so sp flash tool should do the trick.... Just don't forget to install correct drivers....run both drivers and flash tool as admin..... Tell me when it's solved k
jithinraj said:
@Sunderesh, thanks for the suggestion, however, couldnt get any official flashtool for hp voicetab. Can you suggest one please?
Click to expand...
Click to collapse
That is what im trying. To tell you urs is a mediatek device the official flashtool is sp flashtool
rikicchi said:
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
Click to expand...
Click to collapse
try to push the update.zip via adb sideload (Choose "update via ADB sideload" on recovery mode)using adb terminal on PC,as long as your tab can access the recovery mode.remember to backup all your data before u do it.
have a try it's 100% work on me
where I can download update.zip file? anyone can help?
rikicchi said:
Update!
Somehow with a little tweaking and stripping the device, I managed to solve the charging problems. Will update on this once my problem finished.
Jump out from the frying pan and into the fire so they say, I ran into another problem. Finally managed to get into fastboot mode, the devices manager reads it as an Android Device>ROMaster ADB device like the other device I tried to connect while in ADB mode and fastboot mode, but somehow CMD cannot read the device as an ADB device or a Fastboot device like the other device did. I tried to uninstall and reinstall the driver and still nothing happens. I tried to find the usb_driver on the internet and it directs me to the update.zip instead. Trying to update the driver via Computer Management but it says the driver is up to date. Now thinking about making an emulator device based on the HP 7 VoiceTab 1321RA but I really have no idea how to make one. Any one have any idea of what should I do next or can guide me through this? At least until the CMD can read the fastboot.
Thanks a lot!
Click to expand...
Click to collapse
can you explain how did you managed to charge the device??? please its a request......jst help me out :crying::crying:
`Dear Admin,
Hi my Name is Zaki.... i am using HTC Rezound which i purchased in U.A.E
After installing whatsapp i got continious restart problem so i downloaded stock firmware of ICS version. all was good but by mistake i clear internal storage in fastboot mode. and after that i am unable to get into TWRP Recovery mode, it is showing phone with with arrow circle and after few second it converted into phone with triangle (attached screens 2 and 3) please explain me with links how to get TWRP again. and the links for TWRP versions i am not sure which is ok.
Please Reply.
syedzakiabidi said:
`Dear Admin,
Hi my Name is Zaki.... i am using HTC Rezound which i purchased in U.A.E
After installing whatsapp i got continious restart problem so i downloaded stock firmware of ICS version. all was good but by mistake i clear internal storage in fastboot mode. and after that i am unable to get into TWRP Recovery mode, it is showing phone with with arrow circle and after few second it converted into phone with triangle (attached screens 2 and 3) please explain me with links how to get TWRP again. and the links for TWRP versions i am not sure which is ok.
Please Reply.
Click to expand...
Click to collapse
You can't access TWRP because you over-wrote it with the factory RUU firmware image, it isn't there anymore...
Download TWRP image from TWRP official site at https://dl.twrp.me/vigor/ or Flyhalf's build at http://forum.xda-developers.com/showthread.php?t=1902381
Either one is good... then start fastboot, connect usb and flash recovery with the command:
fastboot flash recovery <path/filename of TWRP IMG file>
give it a minute or so, reboot into Hboot and start TWRP.
im having a similar issue but my computer always says waiting for device in command prompt. I have all the drivers installed and the phone says "usb fastboot" or "fastboot usb" (cant recall what order those 2 words are in LoL)
youdoofus said:
im having a similar issue but my computer always says waiting for device in command prompt. I have all the drivers installed and the phone says "usb fastboot" or "fastboot usb" (cant recall what order those 2 words are in LoL)
Click to expand...
Click to collapse
You probably have a driver issue then... Install HTC Sync, connect the phone, then disconnect it, remove HTC Sync and it should work. If that doesn't work, try a different USB port.
Honestly, I switched to Linux a long time ago... I don't have driver issues. If you were running Linux, even a live or USB key distro, you would access it easily.
acejavelin said:
You probably have a driver issue then... Install HTC Sync, connect the phone, then disconnect it, remove HTC Sync and it should work. If that doesn't work, try a different USB port.
Honestly, I switched to Linux a long time ago... I don't have driver issues. If you were running Linux, even a live or USB key distro, you would access it easily.
Click to expand...
Click to collapse
fair point, and i do have ubuntu (of differing flavor dates) on 3 of my machines, so i might just do that. Thanks!! Ill also try the goofy htcsynch (which i forgot about, as im a Sammy guy now) Thanks again!!
i managed to delete twrp and when i did then it shows that the system has been destroyed and after restart it is stuck on
fastboot windows. i tried to connect it with my pc so i could install flash rom but it doesnt show up on pc after connecting to usb.
i dont understand what to do next... helppppppppppppppppppppppppp
I have been in this situation before but I'm not sure how exactly i got into it but I was also doing something to do with twrp. Anyway, whenever you encounter such a problem you need to provide as much information as you possibly can to help us help you. This way people are able to narrow down to what causes a particular problem. One question I have is how did you "delete" twrp?
Now for how I got out of that "system has been destroyed" problem. First off, I had already successfully unlocked my bootloader (don't know if you had). Also, the adb drivers were properly installed on my pc. What I did (at the "system has been destroyed" screen) was to let it sit there while connected to the charger for what seemed to be around 10 minutes and kept doing what I was doing and out of the corner of my eye I saw it rebooting and unexpectedly it went into fastboot. I connected it to my pc and it showed up in device manager and "fastboot devices" command detected it. I proceeded to successfully flash recovery with fastboot and then used "fastboot boot recovery.img (or whatever you have renamed your recovery to)" command. It went into recovery mode after which I copied rom via mtp and flashed it and it agreed to boot into system after the flashing was successful.
These may not be the exact steps I took but as close to them as I can recall (because I was bewildered at the thought that my phone was dead). I think the key turning point was to let it sit at the "system has been destroyed" screen for a while.
twistyplain said:
I have been in this situation before but I'm not sure how exactly i got into it but I was also doing something to do with twrp. Anyway, whenever you encounter such a problem you need to provide as much information as you possibly can to help us help you. This way people are able to narrow down to what causes a particular problem. One question I have is how did you "delete" twrp?
Now for how I got out of that "system has been destroyed" problem. First off, I had already successfully unlocked my bootloader (don't know if you had). Also, the adb drivers were properly installed on my pc. What I did (at the "system has been destroyed" screen) was to let it sit there while connected to the charger for what seemed to be around 10 minutes and kept doing what I was doing and out of the corner of my eye I saw it rebooting and unexpectedly it went into fastboot. I connected it to my pc and it showed up in device manager and "fastboot devices" command detected it. I proceeded to successfully flash recovery with fastboot and then used "fastboot boot recovery.img (or whatever you have renamed your recovery to)" command. It went into recovery mode after which I copied rom via mtp and flashed it and it agreed to boot into system after the flashing was successful.
These may not be the exact steps I took but as close to them as I can recall (because I was bewildered at the thought that my phone was dead). I think the key turning point was to let it sit at the "system has been destroyed" screen for a while.
Click to expand...
Click to collapse
Hey thanks for replying to be honest ..i thought people will help but seems like nobody cares here..
The thing is i dont remember actually exact process but i somehow managed to delete the twrp ..
the main problem is you said after ur phone got onto fastboot you connected it to ur pc and flashed official rom but in my case in the device manger or anywhere ... when my phone is in fastboot mode and i connect it to my pc it doesnt show up as connected not in device manager or any other place...this is the main problem....if only my device shows up connected i wouldve flashed rom way before anything...its been 1 week since my phone died ...i need help...i tried everything from youtube ...seems it doesnt work for me
AjTheKiller1 said:
Hey thanks for replying to be honest ..i thought people will help but seems like nobody cares here..
The thing is i dont remember actually exact process but i somehow managed to delete the twrp ..
the main problem is you said after ur phone got onto fastboot you connected it to ur pc and flashed official rom but in my case in the device manger or anywhere ... when my phone is in fastboot mode and i connect it to my pc it doesnt show up as connected not in device manager or any other place...this is the main problem....if only my device shows up connected i wouldve flashed rom way before anything...its been 1 week since my phone died ...i need help...i tried everything from youtube ...seems it doesnt work for me
Click to expand...
Click to collapse
Have you ever had your phone detected by your pc in fastboot mode? And if you connect it to the pc, does the computer play the hardware detected sound?
You need to rule out a driver issue. I'm not the only other person to get the "system has been destroyed" message and people usually get out of it. I don't know why yours is so problematic.
Had you successfully unlocked bootloader?
The Good old "System has been destroyed" Message. Well, This is terrible This should not happen in the first place. I assume it happened Because you wiped data and then deleted twrp. But If you want help you have to specify how exactly did you " Delete TWRP" What steps did you follow to Delete it. None the less the best bet on getting your device back would be to go to the nearest service center. Pretend you did nothing and maybe they will say you got a bad update.