Hi all,
So, I done effed up. I've been running Elegancia with no problems for a while now, and decided off the cuff to try something new. Long story short, I didn't read properly and ended up flashing an International ROM to my phone by accident. No problem, I think, I'll just ADB sideload Elegancia again.
I boot into TWRP recovery and then find that my computer no longer recognizes my phone. So, I hit restore on TWRP, and restore a backup that I'd made beforehand. After everything finishes restoring, I discover to my dismay that the backup did not include my OS.
Now, when I power up my phone, I can boot only into bootloader. When I try to boot into recovery, the phone is stuck on the TeamWin logo and doesn't move. If I turn on the phone without booting into bootloader, I'm stuck on HTC's logo. My primary goal right now is just
In conclusion, I have no idea what to do with the following problems:
1. When booting into bootloader, my computer no longer recognizes my device, so I have trouble flashing TWRP. Basically, my computer searches for an HTC MTP driver, and then fails to find one/install one. When I try to update the driver manually by downloading a MTP driver and then installing via Device Manager, Windows tells me I'm already using the most up-to-date version.
2. When booting into bootloader and then going to Recovery, my phone will boot into teamwin's logo ... and then not move from there.
I'm aware that I've screwed up pretty bad-- I've done my best to read stuff that's relevant, though. I'd love more help, please! Thanks in advance. Lots of invisible cookies coming your way.
[EDIT: It turns out TWRP was just taking a really, really, really long time to load. That said, my problem now is this:
- When going to Advanced -> ADB Sideload, my computer does not recognize my device when using adb devices.
How can I make sure that this actually works? Thanks again!]
[EDIT #2: Okay, um, I don't know why, but for some reason my computer now lists my device after going into sideload from TWRP. Maybe something to do with a reboot of my computer. If that's true, I feel really stupid. Will update if sideload doesn't work ... I think the cosmic gods are laughing at me. I guess all I had to do was post in xda-developers so that I could publicly embarrass myself before I fix my phone.]
[EDIT #3: Everything works and I'm dumb.]
Related
Hi everyone,
Well I'm in that freak out stage.... where I am sure some of you have been.
Heres my issue...
I have a transformer prime that;
I just unrooted using Vipermod
Then did a factory reset
Now I am stuck in CWM recovery
I attempted to do a restore but after it gets done it brings me back into the recovery
I attempted to ADB but the command prompt opens and closes right away ( I assume from not being in USB debugging, which I cant get into without a rom)
I have no rom's currently downloaded into the prime as I just wiped everything in there as well.
Please i'll gladly pay $5 to anyone who can fix this without it breaking more (hard bricking if I havent already done so)
AHHH please guys help, I'm afraid it will run out of battery soon then I'll be royally screwedddd
anyone?
are you on windows 7?
yes windows 7 professional sp 1 32bit . to reiterate I am stuck in Clockwork mod Recovery without root, and with no roms on the internal SD. I have access to one restore that works but after it completes it reboots back in recovery.
birchnick10 said:
yes windows 7 professional sp 1 32bit . to reiterate I am stuck in Clockwork mod Recovery without root, and with no roms on the internal SD. I have access to one restore that works but after it completes it reboots back in recovery.
Click to expand...
Click to collapse
Turn on your tablet, let it boot into CWM.
Open cmd, cd to the directory with adb (for example cd C:\android), then copy this line of text below and right click > paste in the command prompt window.
adb shell dd if=/dev/zero of=/dev/block/mmcblk0p3 bs=1 count=13
Click to expand...
Click to collapse
That should get you out of CWM into Android, assuming your restore works fine.
Attempted and got error device not found.
I have uninstalled the transformer drivers and also installed the universal drivers as said in other threads.
I assume to use ADB i need usb debugging on for it to read??
My issue is I cant get into any rom so turning on usb debugging is a no go.
can i fastboot push a rom to the internal sd card or better yet can i install a rom from the external SD card via Clockwork mod recovery?
birchnick10 said:
Attempted and got error device not found.
I have uninstalled the transformer drivers and also installed the universal drivers as said in other threads.
I assume to use ADB i need usb debugging on for it to read??
My issue is I cant get into any rom so turning on usb debugging is a no go.
Click to expand...
Click to collapse
Navigate to %android sdk folder%\extras\google\usb_driver, open android_winusb.inf and copy the following in the sections
"Google.NTx86" and "Google.NTamd64"
; TF201
%CompositeAdbInterface% = USB_Install, USB\VID_0B05&PID_4D01&MI_01
%CompositeAdbInterface% = USB_Install, USB\VID_0B05&PID_4D03&MI_02
;
; Fastboot for all projects
%SingleBootLoaderInterface% = USB_Install, USB\VID_0B05&PID_4DAF
Click to expand...
Click to collapse
Save the file and then try running the adb command I gave again.
Says error device not found. I appreciate the help keep it coming it's keeping my hope alive. I really hope this isnt truly hard bricked.
I cant get ADB to read the transformer prime. When I type adb devices nothing shows up . it starts the daemon successfully but then doesn't show the tfp.
Thank you again for helping. I am honestly going to pay who ever finds the true fix. This stress sucks
birchnick10 said:
Says error device not found. I appreciate the help keep it coming it's keeping my hope alive. I really hope this isnt truly hard bricked.
I cant get ADB to read the transformer prime. When I type adb devices nothing shows up . it starts the daemon successfully but then doesn't show the tfp.
Thank you again for helping. I am honestly going to pay who ever finds the true fix. This stress sucks
Click to expand...
Click to collapse
Try the instructions here. Try using this only as a last-ditch resort.
it wont shut off either... i tried both of the above mentions and cant get adb to recognize the prime
Attempted both and stuck at recovery loop without root. any more ideas? is it possible to flash rom from external sd? or is there a recovery I could fastboot rhat has this feature?
Attempted both and neither work. I need to somehow get usb debugging enabled while in clockwork mod. Or figure out a way to install a rom via external SD card while in CWM. Any more help is appreciated!
birchnick10 said:
Attempted and got error device not found.
I have uninstalled the transformer drivers and also installed the universal drivers as said in other threads.
I assume to use ADB i need usb debugging on for it to read??
My issue is I cant get into any rom so turning on usb debugging is a no go.
Click to expand...
Click to collapse
No adb debugging is needed in cwm. Even without any ROM installed. Recovery is different from Android.
Try to long press power (at least ten seconds) to hard reboot, and see if it changes something in device detection.
Did a hard reset and it boots me back into Recovery.
I was able to get a new rom into the internal SD via the emergency/backup.zip method but after it completes and I do a reboot it just boots right back into recovery again.
Any help please is apprecaited.
$5 bounty for a fix via paypal
Oh joy. This one is a spaghetti western in the making.
Okay. Question first : Does Windows 7 RECOGNISE the device in any way shape or form. To find out if this can be done, you need to power up the device and hold the power and volume down buttons, DO NOT press volume up when it suggests a kernel image. If you get three icons, hit vol down once and up once, then plug the USB cable into the PC and the tablet.
If it sees "Something", you've a chance. Download the naked universal USB driver from the dev forum, install it and have your device pick it up on the windows computer. I'm assuming from your comments that you've GOT a working fastboot and adb so I'm going to skip the instructions on that.
If you do have a something, and it's recognised, hit fastboot -i 0x0b05 reboot, if it reboots of it's own accord at this point, you can confirm you have working ADB and Fastboot access. From there you've a few choices. My personal preference would be to ADB push a rom down -after- doing a rebuild of the recovery image via fastboot (I really recommend TWRP for this bit).
http://forum.xda-developers.com/showthread.php?p=26093546#post26093546 - This post here which I wrote will explain how to flash TWRP from fastboot access, presuming you can get it. Once that step is done, wipe EVERYTHING from TWRP, and I mean the whole nine yards, including /system. Raze the memory down to only things it can't actually nuke. Once that's done, reboot to fastboot protocol, get a ROM pushed via ADB and install from inside TWRP.
That -should- get you back in business. Though judging by the tangle you're in, I make no promises.
ADB wont recognize the device. I have installed and uninstalled the drivers about 5 times.
It wont boot into fastboot - just goes directly into Clockwork Mod recovery. Even while holding power and volume down text comes up that says looking for asus recovery. then says clockwork recovery and boots directly into that.
The only way I can get anything into the internal SD card is with MasterZen88's Emergency script tool that puts any 1 file into the internal SD card as backup.zip
It was unrooted prior to all of this as well.
*cringe*
If ADB isn't working -at all- and it's not using the naked USB drivers to get you any kind of workable access. You're starting to smell very much like a hard brick scenario. I'm honestly not sure if there's a way out of that. A lot of the solutions for unbricking absolutely require that the device is able to talk to the outside world, if it's not and the ADB shell is essentially telling you it's talking to dead air, you're in a world of pain.
It's a long shot but it may be worth speaking to ASUS to see if they are willing to, for a fee, restore your tablet to factory settings. Though I can't imagine that will be cheap or simple. If you are able to get an RMA or a means of getting ASUS to poke it, make sure to take photos. Their techies appear to have the worst case of butterfingers in the world.
Go over Pandaball's suggestion, because that's really the last step I can think of before contacting ASUS
"""I recently updated my TF300T to JellyBean 4.2.1. That worked fine. I then wanted to see if I could root this version. I tried 4-5 different custom recoveries, including multiple TWRP and CWM versions. Although they were able to boot to the custom recovery, they could never mount any of the data on the tablet, so I wasn't able to flash any custom roms or root my device. Anyway, I finally installed the latest CWM for the TF300 on JellyBean (6.0.3.1 or something). I still could not mound any tablet data from the recovery. Although installing any of this on a brand new 4.2.1 was incredibly stupid, it gets worse...
I thought that maybe if I did a "wipe data" on the device I would be able to mount it. I then got stuck in a situation in which the tablet would only boot to CWM recovery. I didn't even press the volume key- it would simply go directly to the recovery. This was useless, to say the least, as I could not flash anything or do anything from this.
I then found a way to actually boot into my transformer- I used my PC and typed "adb reboot-bootloader". This gave me the option to cold boot and get into the tablet like normal. However, any subsequent reboots or power-offs would require PC intervention and a cold boot in order to boot into the tablet. This wasn't convenient, although I admin it is much better than where I am now.
I tried multiple times to flash a new recovery, and the same CWM stays on the system. I cannot for the life of me get this stinkin CWM recovery off my device! I ended up trying to wipe my system again, and now I'm absolutely stuck. I can only boot into recovery if I don't do anything on the PC. I can get into fastboot by using a PC, but that's about it. I can't boot into the system after fastboot, and recovery has no rights to change any files.
I can run commands to write new recovery, system, etc using adb, and it sends the file, "writes" it unrealistically fast, and then just says OK as if it was complete. The screen on the tablet doesn't change at all during this, other than the fact that the blinking box for the Fastboot options becomes solid. I have let it sit there for 10-15 minutes and it simply does nothing. (The last attempt was "fastboot -i 0x0B05 flash system blob" where the blob file was the one from the most recent stock firmware download from ASUS.com.) I then have to manually reboot the tablet using the power button, and the whole cycle starts over again.""" I didn't feel like writing all this out so I'm plagiarizing; kill me if you like. I did exactly what he did and got things working the way he did.
Recently though I wiped my hard drive to start a clean windows 7 from scratch and I can't figure out how to get the drivers installed on my computer. As Asus hasn't published them from what I can find and I haven't gotten the android sdk manager to do anything past flashing cmd prompt for a millionth of a second. I basically just need help with the drivers, so any help would be very appreciated. I haven't found anything so far looking through the forums that has helped by the way. I haven't been able to find any threads with solutions yet...
I used the asus pc sync package for the tf300t from asus's website since the tf300tg did not want to download, in any case that with the new google sdk works for me.
Also I noticed issues using anything but twrp openrecovery-twrp-2.5.0.0-tf300t-4.2.blob when it comes to mounting and backups this is the only one that i tried that worked so far.
I have searched a lot on google and xda and havn't found an answer to my issue. Either I'm searching for the wrong thing or I have a very unique problem.
My basic problem is on two Nabi 2's I can't access the bootloader in order to be able to fastboot TWRP (or any other recovery). It just perpetually hangs.
Both tablets boot just fine. Both tablets are on 1.9.37. Both tablets can be factory wiped via the stock recovery.
Both tablets were rooted via TWRP 2.3.3.0 a few years ago in order to install gapps. I wanted to be able to upgrade the tablets to JB when it came out so I used Nabilablite to "return to stock". I followed all of the prompts and it appeared as though everything worked as desired. I downloaded the OTA update told it to install and never looked at the version again...I just assumed it installed. Handed the tablets back to the kids and everyone was happy. Apparently all I did was flash the stock recovery because they are still rooted and have gapps after several factory resets.
Now (a year later) I have realized I was a dufas and didn't actually effect the change I wanted.
If I hold Vol+ & Pwr buttons it loads to the recovery/boot menu with "boot normally" "fastboot protocol" "recovery kernal" and "forced recovery". If I boot normal, the tablet works fine but I can't update via OTA.
If I choose fastboot protocol it just hangs...for ever...HOW DO I FIX THIS!?!?!
If I choose recovery kernal it loads the stock recovery but still wont install any update OTA or otherwise, even from the sd card.
If I choose forced recovery nothing happens, it also appears to just hang.
If I hold Vol- & Pwr button the nabi logo flashes then the device turns off.
If I hold Vol+ & Vol- & Pwr buttons it appears to be the same as just Vol+ & Pwr.
With the tablet on and fully booted I can see it via ADB. I tried using the adb restart bootloader. The tablet reboots but then just hangs never actually loading the boot loader...
I found http://forum.xda-developers.com/showthread.php?t=2587543. But aicjofs mentions seeing a bootloader issue once before.
Usually when it hangs at the Nabi logo it means you don't have the USB cable plugged in or that the fastboot driver is not installed.(Check device manager and see if fastboot driver is installed/no exclimation point). If that's not the issue then it's the bootloader which I have only seen one person have that issue. Depending on which OTA's you have ran there was an update to a Jellybean bootloader so it's possible. That can be fixed with nvflash or placing the bootloader blob in the staging partition.
Also you can always get recovery back without fastboot in Android by dd'ing the recovery over.
For example if the recovery image is on the internal SD
dd if=/data/media/recovery.img of=/dev/block/platform/sdhci-tegra.3/by-name/SOS
Click to expand...
Click to collapse
I have NO idea what dd'ing the recover over is...
Thank you for any help fixing this.
P.S. I have a 3rd tablet that I also used TWRP 2.3.3.0 on to root and install gapps with. I did NOT use nabilablite on that tablet to return to stock. Yesturday I used fastboot to flash TWRP 2.6(something) to flash a JB OTA update which worked fine. It was also able to download and install every other OTA update all the way to the most recent KK with no problems...
najman9 said:
I have searched a lot on google and xda and havn't found an answer to my issue. Either I'm searching for the wrong thing or I have a very unique problem.
My basic problem is on two Nabi 2's I can't access the bootloader in order to be able to fastboot TWRP (or any other recovery). It just perpetually hangs.
Both tablets boot just fine. Both tablets are on 1.9.37. Both tablets can be factory wiped via the stock recovery.
Both tablets were rooted via TWRP 2.3.3.0 a few years ago in order to install gapps. I wanted to be able to upgrade the tablets to JB when it came out so I used Nabilablite to "return to stock". I followed all of the prompts and it appeared as though everything worked as desired. I downloaded the OTA update told it to install and never looked at the version again...I just assumed it installed. Handed the tablets back to the kids and everyone was happy. Apparently all I did was flash the stock recovery because they are still rooted and have gapps after several factory resets.
Now (a year later) I have realized I was a dufas and didn't actually effect the change I wanted.
If I hold Vol+ & Pwr buttons it loads to the recovery/boot menu with "boot normally" "fastboot protocol" "recovery kernal" and "forced recovery". If I boot normal, the tablet works fine but I can't update via OTA.
If I choose fastboot protocol it just hangs...for ever...HOW DO I FIX THIS!?!?!
If I choose recovery kernal it loads the stock recovery but still wont install any update OTA or otherwise, even from the sd card.
If I choose forced recovery nothing happens, it also appears to just hang.
If I hold Vol- & Pwr button the nabi logo flashes then the device turns off.
If I hold Vol+ & Vol- & Pwr buttons it appears to be the same as just Vol+ & Pwr.
With the tablet on and fully booted I can see it via ADB. I tried using the adb restart bootloader. The tablet reboots but then just hangs never actually loading the boot loader...
I found http://forum.xda-developers.com/showthread.php?t=2587543. But aicjofs mentions seeing a bootloader issue once before.
I have NO idea what dd'ing the recover over is...
Thank you for any help fixing this.
P.S. I have a 3rd tablet that I also used TWRP 2.3.3.0 on to root and install gapps with. I did NOT use nabilablite on that tablet to return to stock. Yesturday I used fastboot to flash TWRP 2.6(something) to flash a JB OTA update which worked fine. It was also able to download and install every other OTA update all the way to the most recent KK with no problems...
Click to expand...
Click to collapse
EDIT: OOOPPS. I didn't see this was in the XDA Assist section. I'm not suppose to answer questions(I was just searching for Nabi questions and didn't notice this was XDA assist), dedicated XDAers just point you in the right direction in this section. Please ask the question again in the Nabi2 section and I'l come help you. http://forum.xda-developers.com/nabi-2
This might help answer some questions http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
If it just hangs at fastboot protocol then the USB connection isn't good or fastboot driver isn't installed most of the time. Can you verify fastboot shows up in device manager?(I know the 3rd tabet worked OK) .
Nabilabite doesn't do anything that should change the bootloader, and fastboot should still work as it did before.
dd'ing recovery over means that you use the root access you have in Android to flash the recovery partition instead of using fastboot. IT's just another way of getting the TWRP recovery on the tablet.
The stock recovery won't install the OTA because when you added Gapps it changed some fies and the OTA sees those files as invalid and will fail.
Forced recovery always looks blank screen. It's waiting for you to give it a bootloader to run(beyond the scope here).
You should be able to get back on track once you have TWRP loaded. It's one of 3 things. Bad USB connection, fastboot driver not installed right, bootloader damage. Check the first 2 issues despite the fact the 3rd tablet had no such problems.
One of the XDA smart guys fixed my error of posting this in the wrong section.
I'm running Windows 7 Ultimate and have installed and re-installed the drivers several times. When the tablet's are fully booted ADB has a good connection and sucessfully sends the command to reboot. So I don't believe there is a driver or USB cable error...
When the tablets hang on the fastboot protocol my computer makes the usb connecting noise but fails to install the drivers...
When I hit forced recovery I hear the unrecognized USB device sound...
These two things make me think I don't have the proper drivers installed...but I don't understand how the driver's work when the tablet is booted but not when trying to access the boot loader.
It appears as though I'm going to have to try the dd method if you are able to point me in that direction please.
EDIT: Now I'm thinking I really DON'T have the fastboot drivers installed. I just plugged the 2nd tablet that hands on the fastboot menu and fastboot failed. I also booted the tablet completly, the adb driver's installed correctly but the fastboot driver's did not...I have installed the 64 bit driver's included with nabilablite. I can't find any actual other downloads. The 15 second ADB installer didn't change anything...
najman9 said:
One of the XDA smart guys fixed my error of posting this in the wrong section.
I'm running Windows 7 Ultimate and have installed and re-installed the drivers several times. When the tablet's are fully booted ADB has a good connection and sucessfully sends the command to reboot. So I don't believe there is a driver or USB cable error...
When the tablets hang on the fastboot protocol my computer makes the usb connecting noise but fails to install the drivers...
When I hit forced recovery I hear the unrecognized USB device sound...
These two things make me think I don't have the proper drivers installed...but I don't understand how the driver's work when the tablet is booted but not when trying to access the boot loader.
It appears as though I'm going to have to try the dd method if you are able to point me in that direction please.
EDIT: Now I'm thinking I really DON'T have the fastboot drivers installed. I just plugged the 2nd tablet that hands on the fastboot menu and fastboot failed. I also booted the tablet completly, the adb driver's installed correctly but the fastboot driver's did not...I have installed the 64 bit driver's included with nabilablite. I can't find any actual other downloads. The 15 second ADB installer didn't change anything...
Click to expand...
Click to collapse
Uninstall those nablablite and try this one. http://forum.xda-developers.com/showpost.php?p=62826514&postcount=2639
Or look at the other options in section 4 here http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
I was trying to flash lg-k350n with LineageOs and make a whole bunch of idiotic deeds, so currently I'm felling like dying is the best option for me.
1. I've used this tutorial: .getdroidtips.com/install-custom-rom-using-twrp-recovery. It clearly says that this ROM is for Android 8.0 Oreo, while mine is Android 6.0 Marshmallow. Nevertheless I've downloaded ROM lineage-15.0-20170913-Unofficial-MT6735-64-bit.zip. For some reason TWRP mentioned here getdroidtips.com/lineage-os-15-lg-k8-8-0-oreo/ did not wok for me but I've googled a bit and found something called TWRP-recovery-for-LG-K8.img which worked (not by fastboot flash TWRP-recovery-for-LG-K8.img since this TWRP appeared to be to big but simply by fastboot boot TWRP-recovery-for-LG-K8.img).
So I just did:i
turn on debugger
turn off oem lock
adb boot bootloader
fastboot boot TWRP-recovery-for-LG-K8.img
Feeling happy that TWRP loaded nicely I had not done any backjup and just wiped system as suggested here: lineageos.org/devices/h990/install. Then I've tried to installl the Android 8..0. ROM with obviously did not work. And I've got left with a TWRP working and then I've put the last needle in my coffin - I've rebooted hoping that some hard reset or recovery will fix things for me.
So now I have a phone which I'm able to put to recovery, but it does not recover anything. The phone just go dead after such a recovery.
I cannot put it into fastboot mode, if I could, I would just run 'fastboot boot TWRP-recovery-for-LG-K8.img' and at least had a chance to google a bit for maybe a vanilla ROM or anything working, which I could've later installer.
I've seen that there is a way to put the phone into download mode when it will download stuff from S/W "LG Bridge", bu I don't have Windows and haven't yet tried in virtualbox.
Is there any way to unbrick the device? Please help an idiot!
Sorry, you have to find a Windows box I'm afraid, LG is only offering Windows software for flashing. But chances are quite good that you are able to revive the telephone that way. I have bricked my phone as well but was able to unbrick it this way:
Go to www.lg.com, choose your language, select download, software and firmware.
Select smartphone, Android smartphones, K-series and your model number. This is only to come to the download site of LG Bridge, I guess it's not really important to choose the precise model!
Download LG Bridge, install and start it.
Let it update itself and the USB drivers and keep the software running.
Switch off the phone, press Volume up and keep holding that button.
Connect the phone with via USB with the PC while still pressing Volume Up. The phone should be recognized by the PC (install USB driver) and by LG Bridge (watch the status line to the left, it should show the phone type and USB)
The phone should automatically switch on and show a download screen (yippee!)
Select the second tab "software update" and then click on "correct update error" in the lower right. It should automatically download the correct firmware from the internet, so this is rather fool proof!
Click through it and this should start the flashing process, at the end the phone will automatically reboot, ask for the PIN, etc.
Unbricked!!!
Above instruction worked for me on a completely demolished phone. Lineage OS, changed FS, root attempted, I almost though that's it, but no, it recovered, thumbs up.
I haven't tried in Virtual Box, so I cannot tell if this is working. But you've got nothing to loose, right, so why not try it?
xor512 said:
I was trying to flash lg-k350n with LineageOs and make a whole bunch of idiotic deeds, so currently I'm felling like dying is the best option for me.
1. I've used this tutorial: .getdroidtips.com/install-custom-rom-using-twrp-recovery. It clearly says that this ROM is for Android 8.0 Oreo, while mine is Android 6.0 Marshmallow. Nevertheless I've downloaded ROM lineage-15.0-20170913-Unofficial-MT6735-64-bit.zip. For some reason TWRP mentioned here getdroidtips.com/lineage-os-15-lg-k8-8-0-oreo/ did not wok for me but I've googled a bit and found something called TWRP-recovery-for-LG-K8.img which worked (not by fastboot flash TWRP-recovery-for-LG-K8.img since this TWRP appeared to be to big but simply by fastboot boot TWRP-recovery-for-LG-K8.img).
So I just did:i
turn on debugger
turn off oem lock
adb boot bootloader
fastboot boot TWRP-recovery-for-LG-K8.img
Feeling happy that TWRP loaded nicely I had not done any backjup and just wiped system as suggested here: lineageos.org/devices/h990/install. Then I've tried to installl the Android 8..0. ROM with obviously did not work. And I've got left with a TWRP working and then I've put the last needle in my coffin - I've rebooted hoping that some hard reset or recovery will fix things for me.
So now I have a phone which I'm able to put to recovery, but it does not recover anything. The phone just go dead after such a recovery.
I cannot put it into fastboot mode, if I could, I would just run 'fastboot boot TWRP-recovery-for-LG-K8.img' and at least had a chance to google a bit for maybe a vanilla ROM or anything working, which I could've later installer.
I've seen that there is a way to put the phone into download mode when it will download stuff from S/W "LG Bridge", bu I don't have Windows and haven't yet tried in virtualbox.
Is there any way to unbrick the device? Please help an idiot!
Click to expand...
Click to collapse
same here, we are two now.
Don Pedro! said:
Sorry, you have to find a Windows box I'm afraid, LG is only offering Windows software for flashing. But chances are quite good that you are able to revive the telephone that way. I have bricked my phone as well but was able to unbrick it this way:
Go to www.lg.com, choose your language, select download, software and firmware.
Select smartphone, Android smartphones, K-series and your model number. This is only to come to the download site of LG Bridge, I guess it's not really important to choose the precise model!
Download LG Bridge, install and start it.
Let it update itself and the USB drivers and keep the software running.
Switch off the phone, press Volume up and keep holding that button.
Connect the phone with via USB with the PC while still pressing Volume Up. The phone should be recognized by the PC (install USB driver) and by LG Bridge (watch the status line to the left, it should show the phone type and USB)
The phone should automatically switch on and show a download screen (yippee!)
Select the second tab "software update" and then click on "correct update error" in the lower right. It should automatically download the correct firmware from the internet, so this is rather fool proof!
Click through it and this should start the flashing process, at the end the phone will automatically reboot, ask for the PIN, etc.
Unbricked!!!
Above instruction worked for me on a completely demolished phone. Lineage OS, changed FS, root attempted, I almost though that's it, but no, it recovered, thumbs up.
I haven't tried in Virtual Box, so I cannot tell if this is working. But you've got nothing to loose, right, so why not try it?
Click to expand...
Click to collapse
your phone cannot be trusted loooooop, cannot goto download and fastboot mode...
If you don't manage to enter download mode you have probably indeed bricked the phone. If what I've written above doesn't work for you I know of no other way to resurrect it, sorry.
This is because you cannot burn TWRP to the Flash plus there's no tool available to bootstrap an LG phone with a completely naked or corrupted Flash. There must be something like that, because a freshly manufactured phone has by definition a naked Flash.
With Samsung phones you have Odin and with it it is possible to burn a software to a completely dead phone. So it is almost impossible to hard brick it. With LG unfortunately it is different. Plus this phone is somehow crippled, it has only a very, very limited amount of Flash. So I would recommend to not care for this phone anymore, it's not worth it, and instead get a current one with a decent amount of memory.
Hi there! I'm hoping someone on XDA Developers can help me sort out a root gone-wrong.
I did my best to follow the guide on XDA. I have an Umidigi A9 Pro with 6gb ram. I was successfully able to get the android tools on PC and was able to unlock the bootloader. I went to the Umidigi website to get the ROM. I think I *might* have grabbed the wrong one. Once I got this zip from the Umidigi website, I unzipped the folder and copied the boot.img that was in that root folder to the device. I then went into Magisk and patched the img. I then copied the patched img to my PC then use the commands on the XDA guide to flash the image to the device, the flash was successful (I think). However the device is now stuck in a boot loop. The device displays the Umidigi OEM logo and the android logo; underneath it says in small text:
Orange State
Your device has been unlocked and can't be trusted
Your device will boot in 5 seconds
after 5 seconds the screen goes black and then comes back with the same screen. This happens continuously. I have tried holding the volume down, the power button, and several combinations of volume up, down, and power. Holding all buttons down makes the screen stay black, however while plugged into the PC the PC still makes the device connected and disconnected sounds off and on. Whenever I release the buttons, it goes right back to the loop. Windows PC plays the device connected and disconnected sound on and off. The command prompt is not able to affect the device. When I run "adb devices" it doesn't display the phone so it doesn't seem that windows is detecting the device.
ROM: https://community.umidigi.com/forum.php?mod=viewthread&tid=22236&extra=page=1
https://www.umidigi.com/page-Download.html
I'm hoping for some help on this one
Thank you!
It should be obvious that when being in a bootloop ADB cannot function: On Android side the ADB daemon gets started and after seconds closed, and this over and over again.
In the simplest explanation, a bootloop describes when your phone is stuck in a loop of rebooting. The term "bootloop" is just a more common way of saying "reboot loop."
Curious if you ever managed to get this figured out? I'm in essentially the same situation, though I was not attempting to flash a ROM. I successfully managed to get TWRP 3.5.2 installed and then I was trying to get Magisk installed.
My phone data was wiped, which honestly I didn't care about, however I must have done something wrong with the Magisk installation as now I have the rebooting issue.
I'm able to use ADB and have been trying to push a ROM to the sdcard folder of the internal storage. ADB says the file has successfully completed, but nothing is on the phone. I fixed the issue of the storage showing up as 0MB by changing from EX4 to EX2 and then changed it back to 4.
Really unsure of how to flash a ROM if I can't get the file to pushed to the phones internal memory though.
Zeidwinder said:
Curious if you ever managed to get this figured out? I'm in essentially the same situation, though I was not attempting to flash a ROM. I successfully managed to get TWRP 3.5.2 installed and then I was trying to get Magisk installed.
My phone data was wiped, which honestly I didn't care about, however I must have done something wrong with the Magisk installation as now I have the rebooting issue.
I'm able to use ADB and have been trying to push a ROM to the sdcard folder of the internal storage. ADB says the file has successfully completed, but nothing is on the phone. I fixed the issue of the storage showing up as 0MB by changing from EX4 to EX2 and then changed it back to 4.
Really unsure of how to flash a ROM if I can't get the file to pushed to the phones internal memory though.
Click to expand...
Click to collapse
I honestly haven't messed with it since. It was a very cheap extra android phone I had laying around. Once it got messed up I pretty much just put it in a drawer and said "maybe another day"