HELP! Cant boot into anything except recovery - Verizon Samsung Galaxy S 4

Hey guys just got a new Verizon S4 that has the bootloader unlocked. The guy I bought it from had CM 10.1 installed. I was wanting to go to the google edition rom or a TW rom. I flashed the google edition rom and it booted fine the first boot. Second boot, it got hung on the "Samsung Galaxy S4" screen. I have wiped caches, reflashed different roms and now everytime I try to boot the phone, it hangs at the same screen. I have no idea what to do. I know I can odin back to stock but I don't want to lose my root and unlocked bootloader (I am assuming I will?) Help?

Did you full wipe? Not just cache. You have to do a full wipe, system and everything. Basically factory reset.
If that doesn't work, you can flash back to stock and re root it, it's really easy.
Sent from my SCH-I545 using Tapatalk 4

JaeKay said:
Did you full wipe? Not just cache. You have to do a full wipe, system and everything. Basically factory reset.
If that doesn't work, you can flash back to stock and re root it, it's really easy.
Sent from my SCH-I545 using Tapatalk 4
Click to expand...
Click to collapse
I did a factory reset. If I flash back to stock I will lose my unlocked bootloarder correct?

I tried flashing another recovery and now I cant even get into recovery. I get the following in red at the top "secure fail: kernel" Then I get a yellow triangle below that that says "system software not authorized by verizon has been found on your phone, yada yada" Am I screwed? I tried flashing cwm advanced edition

I dont think u'll lock the bootloader as long as u dont take the me7 update... factory reset then reroot right after....
Sent from my SCH-I545 using xda premium

whitlecj said:
I tried flashing another recovery and now I cant even get into recovery. I get the following in red at the top "secure fail: kernel" Then I get a yellow triangle below that that says "system software not authorized by verizon has been found on your phone, yada yada" Am I screwed? I tried flashing cwm advanced edition
Click to expand...
Click to collapse
You can't flash a new recovery from inside the GPE port. Since you got the triangle of doom I'm guessing that's what you did. You need to ODIN back to the MDK stock Tar file. I don't know who has it but the download link is on here. Then you need to reroot using the MDK root method, which requires you to download the MD2 bootloader tar file and the MDK boatloader tar file and the motochopper root exploit tool. After you have root, update the binaries. Then power off and reflash back to the MDK (using the .tar file) Once back in MDK you can download a new custom recovery. TWRP or CWM. Boot into recovery and make a full nandroid backup. This way if crap hits the fans again you can reflash your backup. After your backup is done. Download the GPE zip file (I usually put it in my microsd card) then boot back into recovery and reflash the GPE ROM.
Important things to remember.
1.) Don't install the ME7 tar file in ODIN when reflashing
2.) Don't accept the update that OTA
3.) Don't reflash from inside the GPE ported ROM
4.) Don't forget to update the Root binaries from google play after installation

Related

Cant flash any recovery image :(

Hey Guys,
So I was running the google experience rom v3 and I decided to head on over to another rom but forgot to wipe before hand and my phone got a little wonky. I eventually ended up doing a complete Odin factory flash which brought me right back to VRUAMDK, when I went to install the OTA update to VRUAME7 my phone would reboot but would not apply and changes and I would get a notification telling me I cant update. I used an Odin flash to the VRUAME7 stock rom and that worked but for some reason I cant flash any sort of recovery now. Booting into recovery just brings me to download mode. I've tried flashing a recovery with Odin with failures on the write. Did I seriously F&#$ up my Nand? I just want to be able to run a recovery and have my GE S4 back Any help would be majorly appreciated.
cj250mills said:
Hey Guys,
So I was running the google experience rom v3 and I decided to head on over to another rom but forgot to wipe before hand and my phone got a little wonky. I eventually ended up doing a complete Odin factory flash which brought me right back to VRUAMDK, when I went to install the OTA update to VRUAME7 my phone would reboot but would not apply and changes and I would get a notification telling me I cant update. I used an Odin flash to the VRUAME7 stock rom and that worked but for some reason I cant flash any sort of recovery now. Booting into recovery just brings me to download mode. I've tried flashing a recovery with Odin with failures on the write. Did I seriously F&#$ up my Nand? I just want to be able to run a recovery and have my GE S4 back Any help would be majorly appreciated.
Click to expand...
Click to collapse
The VRUAME7 firmware patched the Loki exploit and therefore you can not install a custom recovery. Right now all you can do is root the device also there is no way to go back to the VRUAMDK firmware.
Sent from my SCH-I545 using xda premium
ztkryan said:
The VRUAME7 firmware patched the Loki exploit and therefore you can not install a custom recovery. Right now all you can do is root the device also there is no way to go back to the VRUAMDK firmware.
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Wow, am I really that oblivious? apparently.. any reason why this might not work on VRUAMDK either? pretty sure I tried flashing through goomanager on that and ran into the same issue..

[Q] Screwed up recovery on MK2 phone goes to ODIN downloading screen ?

When I first got my second GS4 (about 6 months ago) I rushed to root it and install a recovery (forgetting that the MK2 build has a locked bootloader) I attempted to flash CWM with ODIN and now if I boot to recovery it goes straight to the ODIN Downloading screen. The phone is still fully functional other than the recovery and it is rooted. Since screwing it up I've been looking for a way to fix this I know that i should have used the LOKI method to flash CWM. Is this something that i could fix by flashing stock firmware? or am I out of luck? Thanks.
Timinator01 said:
When I first got my second GS4 (about 6 months ago) I rushed to root it and install a recovery (forgetting that the MK2 build has a locked bootloader) I attempted to flash CWM with ODIN and now if I boot to recovery it goes straight to the ODIN Downloading screen. The phone is still fully functional other than the recovery and it is rooted. Since screwing it up I've been looking for a way to fix this I know that i should have used the LOKI method to flash CWM. Is this something that i could fix by flashing stock firmware? or am I out of luck? Thanks.
Click to expand...
Click to collapse
If your phone is NOT mdk base...you can not use loki or goo manager or rom manager or twrp. Safestrap only can be used. To clean up the mess mostly requires odin of the clean image of your firmware mk2.
sent by safestrap powered echo v26
Flash the stock recovery IMG in odin
Sent from my SCH-I545 using XDA Free mobile app
I suggest the full wipe method located here. Put in ap slot of odin.
http://forum.xda-developers.com/showthread.php?t=2578209
Thanks Tulsadiver I'll give that method a try ... and Thanks to decaturbob for the warning about LOKI, I must have missed that when I was reading over the thread ... I probably would have screwed up my phone again.
Timinator01 said:
Thanks Tulsadiver I'll give that method a try ... and Thanks to decaturbob for the warning about LOKI, I must have missed that when I was reading over the thread ... I probably would have screwed up my phone again.
Click to expand...
Click to collapse
Believe me are not the first...be patient.
sent by safestrap powered echo v26

[Q] question about upgrading to NC5

I am currently on MJ4 jellybean (rooted) and I want to upgrade to NC5 for the wifi calling. Can I simply use odin V3.09 and install this tar and be done?
Download Android 4.4.2 NC5 Firmware for Sprint Note 3 SM-N900P [LATEST][Wifi-Calling]
Does this keep root or will I have to unroot my phone again after running this tar in odin?
If this is incorrect, can someone please tell me how to upgrade to NC5 from Mj4??? Thanks.
randyreed1971 said:
I am currently on MJ4 jellybean (rooted) and I want to upgrade to NC5 for the wifi calling. Can I simply use odin V3.09 and install this tar and be done?
Download Android 4.4.2 NC5 Firmware for Sprint Note 3 SM-N900P [LATEST][Wifi-Calling]
Does this keep root or will I have to unroot my phone again after running this tar in odin?
If this is incorrect, can someone please tell me how to upgrade to NC5 from Mj4??? Thanks.
Click to expand...
Click to collapse
Here is 1 method : [HOW-TO] Update to 4.4.2 NAB & NC5 w/Root from MJ4 Rooted without triggering Knox 0x1
and this one
[Stock ROM] Odin flashable N900PSPTDNH7 (says NH7 but it has the older tars as well)
jdelano said:
Here is 1 method : [HOW-TO] Update to 4.4.2 NAB & NC5 w/Root from MJ4 Rooted without triggering Knox 0x1
and this one
[Stock ROM] Odin flashable N900PSPTDNH7 (says NH7 but it has the older tars as well)
Click to expand...
Click to collapse
Well, I tried to install recovery first using the TWRP Manager app and when I choose reboot into recovery it will start to reboot and when it says "set Warranty Bit: recovery" (in yellow), it will not do anything. I then downloaded the 2.8 recovery tar file and tried to install it in odin and when I reboot into recovery it will get to the ""set Warranty Bit: recovery" (in yellow and still not do anything. The only way I can reboot my phone from there is to pull the battery, hold the power down, power and home button, then choose reboot phone.
How do I fix this problem??
randyreed1971 said:
Well, I tried to install recovery first using the TWRP Manager app and when I choose reboot into recovery it will start to reboot and when it says "set Warranty Bit: recovery" (in yellow), it will not do anything. I then downloaded the 2.8 recovery tar file and tried to install it in odin and when I reboot into recovery it will get to the ""set Warranty Bit: recovery" (in yellow and still not do anything. The only way I can reboot my phone from there is to pull the battery, hold the power down, power and home button, then choose reboot phone.
How do I fix this problem??
Click to expand...
Click to collapse
So you Odin'd to NAB and took OTA to NC5 or did you go right to NH7?
In any event after Odin'g to stock reboot your phone and let it load 100% stock
Then put SuperSU214.zip to your SD Card
turn the phone off
boot to download mode
Odin Philz Recovery (I prefer that sorry)
don't auto reboot.
when its finished and passed, hold the boot to recovery buttons - the phone will reboot into recovery
flash the supersu214.zip (for root)
reboot phone and let it boot
you now have stock root
good luck
jdelano said:
So you Odin'd to NAB and took OTA to NC5 or did you go right to NH7?
In any event after Odin'g to stock reboot your phone and let it load 100% stock
Then put SuperSU214.zip to your SD Card
turn the phone off
boot to download mode
Odin Philz Recovery (I prefer that sorry)
don't auto reboot.
when its finished and passed, hold the boot to recovery buttons - the phone will reboot into recovery
flash the supersu214.zip (for root)
reboot phone and let it boot
you now have stock root
good luck
Click to expand...
Click to collapse
No, the only thing I have done was try to update TWRP from 2.6.3.7 to TWRP 2.8.......for some reason when I try and update the recovery it will not go into recovery, it simply does nothing after the ""set Warranty Bit: recovery" (in yellow) is displayed.
Do I need to update my TWRP recovery or can I just flash the stock NH7 tar in 3.07 odin?
Can I flash the N900PSPTDNH7 tar file in odin 3.07 with my TWRP 2.6.3.7 recovery and be OK???
randyreed1971 said:
No, the only thing I have done was try to update TWRP from 2.6.3.7 to TWRP 2.8.......for some reason when I try and update the recovery it will not go into recovery, it simply does nothing after the ""set Warranty Bit: recovery" (in yellow) is displayed.
Do I need to update my TWRP recovery or can I just flash the stock NH7 tar in 3.07 odin?
Can I flash the N900PSPTDNH7 tar file in odin 3.07 with my TWRP 2.6.3.7 recovery and be OK???
Click to expand...
Click to collapse
Ah, you can't use the newer recoveries with older firmware/bootloader.
You'll have to just odin NH7, follow the steps I gave you and you'll be back at stock rooted.
It will be a good idea to wipe factory reset though, after booting 100% stock, boot to stock recovery and do that then turn the phone off and start the process of putting NH7 (you really should start 100% fresh because you're moving up 3 upgrades)
jdelano said:
Ah, you can't use the newer recoveries with older firmware/bootloader.
You'll have to just odin NH7, follow the steps I gave you and you'll be back at stock rooted.
It will be a good idea to wipe factory reset though, after booting 100% stock, boot to stock recovery and do that then turn the phone off and start the process of putting NH7 (you really should start 100% fresh because you're moving up 3 upgrades)
Click to expand...
Click to collapse
Thanks, I got it to work. I actually didnt do a wipe (I FORGOT) but when it booted up everything was like I had it before upgrading and its working perfectly.
Now to do a backup and find a good ROM.
randyreed1971 said:
Thanks, I got it to work. I actually didnt do a wipe (I FORGOT) but when it booted up everything was like I had it before upgrading and its working perfectly.
Now to do a backup and find a good ROM.
Click to expand...
Click to collapse
yw, glad to hear that!

I Got an MDK Device. Now What?

I recently purchased an MDK device and I was wondering if anyone could let me know what recoveries I can flash.
You are now able to install any recovery on the s4! Want TWRP? You can get it. CWM, no problem. Heck, safestrap might even work. And you can flash any s4 ROM you want like the gpe ROM, octorom, cyanogenmod. Have fun with mdk! Still need a device with mdk myself XD.
bamige1 said:
You are now able to install any recovery on the s4! Want TWRP? You can get it. CWM, no problem. Heck, safestrap might even work. And you can flash any s4 ROM you want like the gpe ROM, octorom, cyanogenmod. Have fun with mdk! Still need a device with mdk myself XD.
Click to expand...
Click to collapse
I don't know if you can answer this, but when you say any TWRP recovery, do you mean ANY? Are all versions of TWRP loki'd? And how do I install a new custom recovery if I already have one? Do I use recovery tools app? And do I have to remove the other one first? Sorry for the barrage of questions, I'm just not looking to screw anything up on a fresh MDK device.
For TWRP, Just go to the play store and download Goo Manager, and that will install the latest TWRP when you choose to install it. If you need to uninstall a custom recovery, you will need to use odin 3.07 or above and the MDK full wipe .tar file (Im trying to find it for you as of now, will reply when found) and flash the stock mdk firmware so you can use loki/root and install a new recovery and a custom rom.
OK because the device comes with CWM installed. Can I update it through CWM ROM manager? And goomanager is no longer supported as an app. Also, where do I download gapps?
Hey again, found the MDK full wipe tar file. Here it is. http://www.rwilco12.com/downloads.p...Galaxy S4 (Verizon) (SCH-I545)/Stock ROMs/TAR And just so its quicker, here is the loki link for you just so its right here when you get back to stock mdk. http://forum.xda-developers.com/showthread.php?t=2290798 Also, when you use odin, dont forget to put the .tar in the PDA slot (3.07) or the AP slot (3.08 and above) If you need anything else, im usually online so i can help ASAP
bamige1 said:
Hey again, found the MDK full wipe tar file. Here it is. http://www.rwilco12.com/downloads.p...Galaxy S4 (Verizon) (SCH-I545)/Stock ROMs/TAR And just so its quicker, here is the loki link for you just so its right here when you get back to stock mdk. http://forum.xda-developers.com/showthread.php?t=2290798 Also, when you use odin, dont forget to put the .tar in the PDA slot (3.07) or the AP slot (3.08 and above) If you need anything else, im usually online so i can help ASAP
Click to expand...
Click to collapse
I have a no wipe MDK.tar file. What's the difference between full and no wipe? And any ideas for my questions on my last post? Sorry for asking so many. Just don't want to mess anything up.
Full wipe will delete everything, but it will be able to 100% delete any recovery if you dont want, the no wipe will keep data but restore every partition, i think that includes recovery, if you need to keep the data, try the no wipe, and see if recovery is there, if not, you can install CWM from the play store or find a flashable TWRP for odin, depending on preference. And if you want to just keep CWM, i think the CWM app should be able to update it. Also didnt know goomanager wasnt a thing anymore. Havent used a custom recovery in a year or two, stuck with safestrap.
bamige1 said:
Hey again, found the MDK full wipe tar file. Here it is. http://www.rwilco12.com/downloads.p...Galaxy S4 (Verizon) (SCH-I545)/Stock ROMs/TAR And just so its quicker, here is the loki link for you just so its right here when you get back to stock mdk. http://forum.xda-developers.com/showthread.php?t=2290798 Also, when you use odin, dont forget to put the .tar in the PDA slot (3.07) or the AP slot (3.08 and above) If you need anything else, im usually online so i can help ASAP
Click to expand...
Click to collapse
bamige1 said:
Full wipe will delete everything, but it will be able to 100% delete any recovery if you dont want, the no wipe will keep data but restore every partition, i think that includes recovery, if you need to keep the data, try the no wipe, and see if recovery is there, if not, you can install CWM from the play store or find a flashable TWRP for odin, depending on preference. And if you want to just keep CWM, i think the CWM app should be able to update it. Also didnt know goomanager wasnt a thing anymore. Havent used a custom recovery in a year or two, stuck with safestrap.
Click to expand...
Click to collapse
Now can I flash the no wipe or full wipe through CWM? Or just the no wipe? I'm guessing just the no wipe.
I dont believe both can be flashed in CWM, both say to use odin.
bamige1 said:
I dont believe both can be flashed in CWM, both say to use odin.
Click to expand...
Click to collapse
OK makes sense. And where would I get gapps from?
Make sure to keep reading so you don't make the fatal mistake of flashing a locked non-MDK bootloader...
Sent from my SCH-I545 using XDA Free mobile app
Try this http://itvends.com/gapps/gapps-kk-20140606-signed.zip Its a link for Gapps from Cyanogenmod, its the KitKat Gapps.
Hey, hows everything going?
gsciullo said:
I recently purchased an MDK device and I was wondering if anyone could let me know what recoveries I can flash.
Click to expand...
Click to collapse
I just read through the thread and sensed confusion. Use Odin 3.09 (just google it) to flash (in the AP box) The MDK full Wipe tar.md5, that will set the device to stock MDK, then download either CWM (http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.4.4-jfltevzw.img) or TWRP (http://goo.im/devs/s0updev/gooinsideme) and flash one of them with Flashify from the Play Store.
Download the ROM of your choice and place on SD Card and install using your Custom Recovery, use Gapps from here for CM (http://itvends.com/gapps/gapps-kk-20140606-signed.zip), here for AOSP (http://highonandroid.com/android-apps/download-android-4-4-4-gapps/) and Touchwiz ROMs should already contain them because they are licenced to.
npjohnson said:
I just read through the thread and sensed confusion. Use Odin 3.09 (just google it) to flash (in the AP box) The MDK full Wipe tar.md5, that will set the device to stock MDK, then download either CWM (http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.4.4-jfltevzw.img) or TWRP (http://goo.im/devs/s0updev/gooinsideme) and flash one of them with Flashify from the Play Store.
Download the ROM of your choice and place on SD Card and install using your Custom Recovery, use Gapps from here for CM (http://itvends.com/gapps/gapps-kk-20140606-signed.zip), here for AOSP (http://highonandroid.com/android-apps/download-android-4-4-4-gapps/) and Touchwiz ROMs should already contain them because they are licenced to.
Click to expand...
Click to collapse
I currently have CWM recovery installed, is there a way for my to install TWRP without using ODIN to flash the MDK full-wipe? Or is that the only way?
gsciullo17 said:
I currently have CWM recovery installed, is there a way for my to install TWRP without using ODIN to flash the MDK full-wipe? Or is that the only way?
Click to expand...
Click to collapse
Yea, download the twrp img I linked above, and flash it using flashify from the play store. Good luck.
npjohnson said:
Yea, download the twrp img I linked above, and flash it using flashify from the play store. Good luck.
Click to expand...
Click to collapse
Are you saying yes to my question if I can do this without ODIN? Or are you saying yes to "Is that the only way"? I am just not trying to mess my phone up.
gsciullo17 said:
Are you saying yes to my question if I can do this without ODIN? Or are you saying yes to "Is that the only way"? I am just not trying to mess my phone up.
Click to expand...
Click to collapse
No odin needed. Just download and flash via flashify.
Also, this is a bit off of the current conversation, but for some reason my Google Apps aren't updating themselves. I don't have the material design Play Store or any of the very recent updates for the Google Apps. Any ideas?

Sprint Note 3 root problems HELP PLease

i rooted my devce using cwm(n9005-cwm-recovery-6.0.4.7-kk(0125)) and gained super su access.
tried to put new rom on went through the process of backing up which i dont thinhk worked, and wiping the sustem
tried to put on new rom using cwm and got an error on startup
so i tried to go back and start the whole process over again
using odin i tried to flash the phone and FAIL
i am stuck in a loop everytime i start normal or start in cwm i get a message saying firmware upgrade encountered an issue. please select recovery mode in kies and try again
but i can still use ODIN
What can i do
Thanks
I'd use TWRP if I were you and save yourself some headaches. From my understanding, CWM is hit or miss on our beloved Note 3.
https://dl.twrp.me/hltespr/twrp-2.8.6.1-hltespr-4.4.img.tar.html
Sent from my SM-N900P using XDA Free mobile app
Shotty2015 said:
i rooted my devce using cwm(n9005-cwm-recovery-6.0.4.7-kk(0125)) and gained super su access.
tried to put new rom on went through the process of backing up which i dont thinhk worked, and wiping the sustem
tried to put on new rom using cwm and got an error on startup
so i tried to go back and start the whole process over again
using odin i tried to flash the phone and FAIL
i am stuck in a loop everytime i start normal or start in cwm i get a message saying firmware upgrade encountered an issue. please select recovery mode in kies and try again
but i can still use ODIN
What can i do
Thanks
Click to expand...
Click to collapse
First what version of KK where you on when you rooted your device ? Anyway pull battery then reinstall battery. Boot into download mode, then odin flash the version of KK you had before you rooted your phone.
Chances are the device won't boot. DON'T PANIC !!! Happenes all the time, just pull the battery again. Boot into download mode again, and odin flash the stock KK again it should boot the second time.
Once you get it to boot up, check and see what version of KK you are running and make the kernel , modem, and bootloader are the same.
At this point l would odin flash it again to make sure you have a clean install. Now you can root and install a custom recovery. I use TWRP.
IF you have any questions just click rom flashing basics in my signature.
Pull battery boot cold to download mode. From there attempt odin flash of factory tar image. Report back please.
Sent from my 0x1 Note 3...... I love tep
i was originally using the stock 5.0 lollipop i rooted using the method on galaxynote3root. tried re flashing but got a fail again i dont know if im using the right kernel
odin OC5 tar.
odin cfautoroot.
odin twrp.
done. easy peasy.
WOOOP WOOOOOOOP.
It worked. it took 10 tries, but it finally worked
now to root is this the right cfautoroot
CF-Root: 48 514 333
CF-Auto-Root: 29 510 246
This file: 106 225
i just dont want to mess it up again
thanks so much guys
every things good rooted and twrp installed.
Thanks again guys

Categories

Resources