So I had my HTC One rooted and I was using Revolution HD Rom with TWRP recovery. I decided to install rooted 4.3 Rom from http://forum.xda-developers.com/showthread.php?t=2341395 which means that
- Installed Radio from thread i mentioned
- Installed faux kernel
- Installed the ROM
The installation went fine and when I booted, I kept getting com.android.phone error. I read that I have to re-flash the radio. I did but no success and phone kept restarting. I did the whole process couple of times but no success.
The i decided to go back to 4.2 so i decided to install CleanROM which comes with built-in kernel (http://forum.xda-developers.com/showthread.php?t=2253527) ... I mean the ROM.ZIP has kernel built in as wel .. .
So I installed it and when i started my phone, It is stuck in HTC One logo. No matter how many times i try, it is still there.
With clean ROM, I believe I have installed old kernel, now i don't know how to get my phone get back to workign ..
Need HELP
..alee said:
So I had my HTC One rooted and I was using Revolution HD Rom with TWRP recovery. I decided to install rooted 4.3 Rom from http://forum.xda-developers.com/showthread.php?t=2341395 which means that
- Installed Radio from thread i mentioned
- Installed faux kernel
- Installed the ROM
The installation went fine and when I booted, I kept getting com.android.phone error. I read that I have to re-flash the radio. I did but no success and phone kept restarting. I did the whole process couple of times but no success.
The i decided to go back to 4.2 so i decided to install CleanROM which comes with built-in kernel (http://forum.xda-developers.com/showthread.php?t=2253527) ... I mean the ROM.ZIP has kernel built in as wel .. .
So I installed it and when i started my phone, It is stuck in HTC One logo. No matter how many times i try, it is still there.
With clean ROM, I believe I have installed old kernel, now i don't know how to get my phone get back to workign ..
Need HELP
Click to expand...
Click to collapse
You probably just need to clear cache .. did you do a full factory reset going from GPE 4.3 to CleanRom ?
To clear the cache boot the phone to the bootloader (power + Vol down)
plug into the pc and go to your Fastboot folder and open command prompt and type "fastboot erase cache" then "fastboot reboot"
You really have to do a complete wipe/ factory reset when going from one version number to another IE: 4.3 to 4.2.2. You should also note that flashing a kernel has to be last in the line .. the rom you flashed last overwrites the kernel you just flashed.
So the correct order would be:
Factory reset / Wipe
Install Rom
Flash Radio
Flash Kernel ( if you stick with CleanRom skip this step)
clsA said:
You probably just need to clear cache .. did you do a full factory reset going from GPE 4.3 to CleanRom ?
To clear the cache boot the phone to the bootloader (power + Vol down)
plug into the pc and go to your Fastboot folder and open command prompt and type "fastboot erase cache" then "fastboot reboot"
You really have to do a complete wipe/ factory reset when going from one version number to another IE: 4.3 to 4.2.2. You should also note that flashing a kernel has to be last in the line .. the rom you flashed last overwrites the kernel you just flashed.
So the correct order would be:
Factory reset / Wipe
Install Rom
Flash Radio
Flash Kernel ( if you stick with CleanRom skip this step)
Click to expand...
Click to collapse
tried couple of things, didn't work. I ended up downloading viperrom and it worked fine. thanks
Related
Need some help and am not having any luck on the forums.
I have an Hboot 1.5 Evo 3D rooted with the Synergy ROM. I have EXT4 files, and a ziggy kernal.
I have had the ROM or 2 months. I overclocked it to 1.8 GHZ the other day and locked the phone up. I kept trying to reboot and when I did it just locked up. I overcloked in SetCPU, and it was checked "set at boot", so I couldn't get it back down. I kept doing this, tried a factory reset in hboot, and now the only thing the phone does is tries to boot the rom and gets stuck after about 30 seconds.
What can I do? Is this phone fried? I tried to use the command prompt on my computer and can't get anything to communicate with the phone via fastboot USB. Answers needed as I have had a non functioning phone for 4 days. An answer or a link would be greatly appreciated.
Boot into recovery and flash a new rom (or reflash the rom). Make sure you wipe data/cache partitions/dalvik cache before flashing the rom and then wipe the dalvik cache again after flashing the rom.
Theonew said:
Boot into recovery and flash a new rom (or reflash the rom). Make sure you wipe data/cache partitions/dalvik cache before flashing the rom and then wipe the dalvik cache again after flashing the rom.
Click to expand...
Click to collapse
Can't get into clockwork mod recovery to do that. Don't know what the problem is but I am about to just run this thing over and take it to Best Buy.
bgdog86 said:
Can't get into clockwork mod recovery to do that.
Click to expand...
Click to collapse
Reflash ClockworkMod recovery then, via fastboot. Use this: http://forum.xda-developers.com/showthread.php?t=794638.
So I rooted with HTC method with hboot 1.5.
I have lots of roms on it to check the speed, battery life, features of them but there has been a problem with many ROMs (MIUI, ICS alpha, Mik, Infected, Warm) all will act "wonky" after couple of days of using the rom. They will show red lines, slow downs, temporary freezes, battery would drop by 1% every 30 sec.
So, the usual thing to do is restart and BAM! They rom's logo shows up and it freezes there. Do I need a new radio update or RUU or something?
Never encountered anything close and I've been tweaking phones since the Moto Q days!
New radios might help. Are you wiping EVERYTHING before flashing?
We're comin from a pure power source.
How can I flash this new radio? Just install .zip of the file from recovery, correct?
I do "factory reset" on the twrp 2.0 recovery before I install any rom
ninten5 said:
I do "factory reset" on the twrp 2.0 recovery before I install any rom
Click to expand...
Click to collapse
I'm using twrp2 and I do
Factory reset
Wipe cache
Wipe dalvic cache
Wipe system
Factory reset (again)
Flash Rom
Reboot system.
And i never have any bootloops or stuck in HTC white screen or any issues.
Sent From My Optimized R3Dimensions
Yea. Factory reset isn't enough. I encountered that issue when doin restores on me og evo. I had to wipe cache and dalvik to get it to work.
We're comin from a pure power source.
Use cwm older 4 version as recovery.
Fastboot boot recovery.img. make sure you have a copy of it in your adb folder.
Wipe everything and flash rom
OK ill try that.
What about backup and restores, my nAndroid backups don't work
ninten5 said:
So I rooted with HTC method with hboot 1.5.
I have lots of roms on it to check the speed, battery life, features of them but there has been a problem with many ROMs (MIUI, ICS alpha, Mik, Infected, Warm) all will act "wonky" after couple of days of using the rom. They will show red lines, slow downs, temporary freezes, battery would drop by 1% every 30 sec.
So, the usual thing to do is restart and BAM! They rom's logo shows up and it freezes there. Do I need a new radio update or RUU or something?
Never encountered anything close and I've been tweaking phones since the Moto Q days!
Click to expand...
Click to collapse
Either one of two things:
your phone is defective
stop using so many apps for stuff like checking on system statuses. Just install a ROM fresh and leave it for a week with just your base essential apps like email and stuff. If the problem doesnt arise you know all your crap is causing it.
A radio update isnt going to do anything for a system issue as it is just your signal and stuff that the radio firmware would affect.
Sounds like the flash went bad due to not a full wipe or boot.img.
Twrp 2.0 is known to have its own issues.
Update: So I have infected rom installed for a couple of days, installed it using the method mentioned with wiping cache, dalvik cache, system, battery stats and guess WHAT?
It happend again, I would lose touch screen and touch button control, only way to regain control was to close screen by hitting power and waiting a few seconds and pressing it again to open the screen. Got fed up after a while and decided a battery pull, froze of Infected LOGO
Is it the way I flash the rom that is causing issues? I install the zip first with cwm 2.0 then I connect to computer and type "fastboot boot boot.img" to push the boot.img for that rom.
ninten5 said:
Update: So I have infected rom installed for a couple of days, installed it using the method mentioned with wiping cache, dalvik cache, system, battery stats and guess WHAT?
It happend again, I would lose touch screen and touch button control, only way to regain control was to close screen by hitting power and waiting a few seconds and pressing it again to open the screen. Got fed up after a while and decided a battery pull, froze of Infected LOGO
Is it the way I flash the rom that is causing issues? I install the zip first with cwm 2.0 then I connect to computer and type "fastboot boot boot.img" to push the boot.img for that rom.
Click to expand...
Click to collapse
Do this man
Get cwm 4.0 version ok now flash that then leave a copy of it in your adb folder where adb is...
Now make sure debug is on
adb reboot bootloader
fastboot boot recovery.img
Then wipe everything but not your SD card
and flash rom works this way just like the S off users use. You don't have to use flash gui or pull boot img..
So I took out twrp 2.0 recovery and put clockworkmod 5.0
I don't know why but I cant boot into the recovery without connecting my phone and pushing the .img through fastboot
Well at least two things are solved, after a restart the rom doesnt freeze and I dont have to fastboot boot.img for installing a new rom.
ninten5 said:
So I took out twrp 2.0 recovery and put clockworkmod 5.0
I don't know why but I cant boot into the recovery without connecting my phone and pushing the .img through fastboot
Well at least two things are solved, after a restart the rom doesnt freeze and I dont have to fastboot boot.img for installing a new rom.
Click to expand...
Click to collapse
cwm 4 is better for this phone dude. he said 4 not 5.
I have a sch-i500 that is rooted with cwm working.
I am very interested in running liquid smooth v 2.9 found here: http://forum.xda-developers.com/showthread.php?t=2245120
so I did a format, wiped the cache and davlik. when I installed the zip from external sd card the phone immediately gave me a screen for CWM v 6.0.3.3.
I can still navigate and restore old back ups but the phone does not go past the Samsung logo on the boot screen. Any advice is appreciated.
I was previously running stock 2.3.5 E09 if that helps
http://forum.xda-developers.com/showthread.php?t=1026746
seems to be the best way for me to recover from this (looks like I flashed a non voodoo rom without removing voodoo) but I am unable to get the phone into download mode with or without the battery in the phone.
please help......(update) Alright, I am a moron. needed to have a powered usb port. on my way to recovery. thanks for having all this great info in one place.
aircooledbusses said:
so I did a format, wiped the cache and davlik. when I installed the zip from external sd card the phone immediately gave me a screen for CWM v 6.0.3.3.
I can still navigate and restore old back ups but the phone does not go past the Samsung logo on the boot screen. Any advice is appreciated.
I was previously running stock 2.3.5 E09 if that helps
Click to expand...
Click to collapse
Oh so close.
When coming from 2.3.x ROM you will need to flash the rom (liquid: or other 4.2.x) you will need to flash 2 more times...
The 1st flash get you into the new recovery only,,, as you found out.
2nd flash will pop up with an error message about incompatible partition and telling you to re-flash again,,,
So 3rd flash actually installs your new ROM
Then install a current/compatible Google gapps
.
Enjoy
.
Thank you, I am getting closer.
still on the second and third flash of the rom I get a satus 7 error which I think is a bootloader issue.
I have flashed the GBbootloader.tar through odid to no avail and am following Section:4 How to flash any ICS 4.0.x & 4.x.x JellyBean based rom
http://forum.xda-developers.com/showthread.php?t=1238070
anythoughts?
aircooledbusses said:
Thank you, I am getting closer.
still on the second and third flash of the rom I get a satus 7 error which I think is a bootloader issue.
I have flashed the GBbootloader.tar through odid to no avail and am following Section:4 How to flash any ICS 4.0.x & 4.x.x JellyBean based rom
http://forum.xda-developers.com/showthread.php?t=1238070
anythoughts?
Click to expand...
Click to collapse
what does the error say besides status 7?
did you odin the CWM4 fixed for cm7 then install the ROM 3 times?
can you get a pic up for us to see?
just to be sure......using odin, I repartitioned with the pit, and flashed a E03 rom. rebooted the phone fine.
flashed the CWM4 fix for 7 and redid the GB bootloaders as well.
went into recovery and factory reset, wiped cache, and dalvik.
installed liquid-JB-v2.7-Official-fascinatemtd.zip this time first time took me directly to clockwork where I flashed again. prompted with install from sdcard complete. repeated and got same message.
factory reset, wipe, wipe and flashed gapps. Everything seems to have worked this time with the v2.7Official instead of 2.9. I will play with this for just a bit and probably try it again tonight with a fresh downloaded copy of v2.9. I really do appreciate your assistance and help and I would not have gotten this far without the forum.
update:
flawless installation of v2.9 since 2.7 was already installed. (installed via cloclwork mod recovery)
It was most likely an operator error that prevented me from installing 2.9 after E03. But I don't see the benefit of going back to recreate why it didn't work. Thanks again all is good and right.
well I was flashing MIUI V5 UNIVERSAL - v. 3.7.12 for the 3vo and it got stuck in a bootloop. to try and fix it I tried to restore a backup and that rom played a little of the boot animation but then gets stuck in a bootloop. I also tried to wipe/format everything but, that didn't work. If a logcat would help i would appreciate a link on how to do that without being able to boot. I can boot to 4ext recovery. The cause could be that while flashing I selected the file to flash, I selected a file that didn't finish downloading. Thanks in advance for any help
Also if it matters my original rom was negalite blurom.
cdog1213 said:
well I was flashing MIUI V5 UNIVERSAL - v. 3.7.12 for the 3vo and it got stuck in a bootloop. to try and fix it I tried to restore a backup and that rom played a little of the boot animation but then gets stuck in a bootloop. I also tried to wipe/format everything but, that didn't work. If a logcat would help i would appreciate a link on how to do that without being able to boot. I can boot to 4ext recovery. The cause could be that while flashing I selected the file to flash, I selected a file that didn't finish downloading. Thanks in advance for any help
Also if it matters my original rom was negalite blurom.
Click to expand...
Click to collapse
I ran into your same problem today.
At the time my phone was on latest sprint firmware, ICS coolrom (latest rom and kernel) with hboot 1.58 unlocked s-off.
The steps I did preparing to install MIUI was
1) wipe data/factory reset from 4EXT
2) format all (except sdcard)
3) Install MIUI > chose mirage kernal
4) rebooted
after reboot it was stuck at the logo, at least I thought it was, let it sit for about 5 minutes.
Pulled the battery and tried steps 1-4 again.
Kept getting bootloop at that point. Boot splash -> logo -> reboot.
Next I tried flashing the latest mirage kernel from 4ext.
No luck, same issue.
Tried repeating steps 1-4 again.
No luck stuck in bootloop.
At that point I tried to run recovery from a backup I knew was working.
Wiped all data and format all -> selected recovery from 4ext.
Result: still boot loop.
At that point I tried changing bootloader to 1.58.58 jbear. and wiping/formatting all and trying recovery again from known working cool ics backup.
Result: still bootloop.
Switched back to 1.58 bootloader and tried fresh install of CoolICS rom. (I always wipe all data and format all before any rom change.)
Result: still bootloop.
At this point I was getting frustrated but I had an idea that the MIUI install when selecting mirage kernel may have messed up the partition size for the kernel since the mirage kernel states it must be flashed from the flash gui app first to resize the boot partition.
Next I downloaded pacman rom and attempted that install.
result: could not install due to wrong bootloader.
Next I downgraded bootloader to 1.50.50 jbear.
Wiped everything and retried pacman rom.
Install success, before starting the reboot from recovery, I received a message that the boot image has changed and will make a backup/format/flash the new boot image.
upon reboot I was able to successfully boot into pacman rom.
At that point I tried to wipe all again and install CoolICS rom again.
result: bootloop, but probably because of bootloader version. Did not fully test it as at this point I just wanted a working phone again and wanted to try out MIUI.
Rebooted to recovery and wiped everything again.
Installed MIUI using stock kernel option. This time on reboot I let it sit at the rom logo without touching anything. I think it restarted once on its own.
Result: Success. Phone working normally now. such a headache I am just leaving it as is for now.
Jeffjb said:
I ran into your same problem today.
At the time my phone was on latest sprint firmware, ICS coolrom (latest rom and kernel) with hboot 1.58 unlocked s-off.
The steps I did preparing to install MIUI was
1) wipe data/factory reset from 4EXT
2) format all (except sdcard)
3) Install MIUI > chose mirage kernal
4) rebooted
after reboot it was stuck at the logo, at least I thought it was, let it sit for about 5 minutes.
Pulled the battery and tried steps 1-4 again.
Kept getting bootloop at that point. Boot splash -> logo -> reboot.
Next I tried flashing the latest mirage kernel from 4ext.
No luck, same issue.
Tried repeating steps 1-4 again.
No luck stuck in bootloop.
At that point I tried to run recovery from a backup I knew was working.
Wiped all data and format all -> selected recovery from 4ext.
Result: still boot loop.
At that point I tried changing bootloader to 1.58.58 jbear. and wiping/formatting all and trying recovery again from known working cool ics backup.
Result: still bootloop.
Switched back to 1.58 bootloader and tried fresh install of CoolICS rom. (I always wipe all data and format all before any rom change.)
Result: still bootloop.
At this point I was getting frustrated but I had an idea that the MIUI install when selecting mirage kernel may have messed up the partition size for the kernel since the mirage kernel states it must be flashed from the flash gui app first to resize the boot partition.
Next I downloaded pacman rom and attempted that install.
result: could not install due to wrong bootloader.
Next I downgraded bootloader to 1.50.50 jbear.
Wiped everything and retried pacman rom.
Install success, before starting the reboot from recovery, I received a message that the boot image has changed and will make a backup/format/flash the new boot image.
upon reboot I was able to successfully boot into pacman rom.
At that point I tried to wipe all again and install CoolICS rom again.
result: bootloop, but probably because of bootloader version. Did not fully test it as at this point I just wanted a working phone again and wanted to try out MIUI.
Rebooted to recovery and wiped everything again.
Installed MIUI using stock kernel option. This time on reboot I let it sit at the rom logo without touching anything. I think it restarted once on its own.
Result: Success. Phone working normally now. such a headache I am just leaving it as is for now.
Click to expand...
Click to collapse
well I went to go try and boot P.A.C. and my phone just booted normally. So thanks for the help
flashing a new rom for buddy who bought a pre-rooted thunderbolt. the previous version of mikrom was missing play store. when i try to flash anything to it all i get is boot loop. when i boot to recovery i get: cant mount recovery command, recovery log, recovery last log. running clockwork 3.1.0.2
ive tried updating the radio made sure to do full wipe prior to install. when i updated radio i did full wipe, flashed, boot back to recovery, flashed rom, full boot. however it never fully boots.
s-off
hboot - 1.04.2
radio - 1.49.00.0406
well i flashed team win then did full wipe n flash worked fine