Related
hi guys, first post
ive had my rooted galaxy s2 with the latest siyah kernel 3.3.2, i had cwm recover 5 and rom manager
i tried to flash cyanogen mod through rom manager, following the steps it gave me, i downloaded the files through rom manager and went through all the prompts till i clicked agee to go into recovery mode.
once it did that the phone shut off but would not turn on again so i went to turn on manually, it loads the samsung galaxy screen with the yellow triangle but goes straight into a white flashing screen.
Ive tried taking the battery out, leaving it and putting it back in again, still a flashing screen,
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
atifsh said:
check what i9100 you have and download correct cm9.
using cwm format data system cacha sdcard dalvik
flash cm9 using cwm
rommanager doesnt work on GS2
Click to expand...
Click to collapse
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
MistahBungle said:
Try flashing a kernel first, and if that doesn't work, flash a rom in Odin, re-root your phone & restore your backup. But yeah, don't use Rom Manager with a kernel that has CWRecovery. One or the other. Rom Manager has a habit of doing stuff like what's happened to you on SGS2's which also have CWRecovery installed.
Click to expand...
Click to collapse
awesome, I tried flashing the latest siyah kernel, the one that i already had on my phone before the problems, that didn't do anything to get me through, any suggestions on which kernel/rom to flash?
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
atifsh said:
because you are on siyah and im not comfortable with that, please flash a stock kernel or cfroot kernel and format system data partitions after that.
now flash any official stock ICS or GB rom using Odin.
Click to expand...
Click to collapse
ohh sweet baby jesus im i flashed a cf kernel and now im into cwm on 4.0.1.5, can i just normal reboot my phone now?
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
From then on, if you want to flash CM9 nightlies, do it via CWM/CWRecovery, just don't use Rom Manager this time I use CM9 as well & I have it frozen because I use Siyah (which has CWM).
MistahBungle said:
No need to format anything. Given you want to use CM9, I'd recommend you flash CM9 Resurrection Edition in Odin, put the latest CM9 nightly & Gapps on your internal/external SD card then flash that nightly & Gapps in CWM (read the first page of the CM9 discussion thread thoroughly & follow the instructions to the letter. From there you can stick with the CM9 stock kernel or flash whatever other kernel you want to use (provided it's CM9 compatible).
Click to expand...
Click to collapse
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
i still say wipe first, cm9 will come with its own latest cwm that can be used to flash any custom roms after.
flashing via odin version is easy and fool proof as it has everything bundled for correct working of cm9.
If you flash CM9 the CM9 kernel will overwrite/replace your CFRoot kernel, which is fine. As I said in my previous post you can stick with that if you're happy with it, or you can flash any other kernel that's CM9 compatible.
No suggestions/recommendations. Because your experience will not be the same as someone else's using a given rom or kernel. If you want to go down that path, try some kernels to find one you like. To see if a kernel is compatible with CM9, read the the dev thread devoted to the kernel in question.
OK. Given you're back @ square one, Atifsh is right when he says flashing the Resurrection version (Odin version) then flashing Gapps/nightly from there is probably a good way to go for you. Once you've done that, you'll be able to flash CM9 nightlies via CWRecovery. As said previously, read that first page of the CM9 discussion thread/instructions thoroughly before you do anything.
keegan25 said:
alrighty! thanks for the info, is cf kernel compatible with cm9? i want to just have one kernel that'll handle most roms, any suggestions?
ive reloaded my old stable phone version, the version i saved before trying to flash cyanogen mod with rom manager, this version has siyah and stock rom, back to square one *phew*
Click to expand...
Click to collapse
Something similar happened to me too. I flashed stock XWLPG, then siyah 3.3.2 and did a factory reset. After that, got stuck in a flashing white screen after the yellow triangle.
What I did: boot on download mode, flash XWLPG over PC Odin once more, did a full wipe BEFORE flashing siyah and then siyah. Everything went ok this time, but eventually I found out that every time I do a factory reset after siyah that problem would occur.
Regards,
Sent from my GT-I9100 using XDA
keegan25 said:
i have the international 19100T
ahh rats i should have known rom manager does not work, , im just stuck in a white flash screen on boot up, cant get to cwm, although i can get into odin
would reflashing my kernel on odin get me through? everything is back up onto my sd card.
Click to expand...
Click to collapse
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
acbutcher91 said:
exact same problem, except i can't put it into download mode?
i know it's powerbutton vol down but it's not working? any ideas?
Click to expand...
Click to collapse
Power + vol down + home key?
Hello all,
i tried installing the JellyBam ROM last night and things went ugly somehow. I had installed the good old CM10 a weak ago with ClockWorkMod! it was running perfectly except i had antenna/reception problems so i thought i give another rom a shot. followed every step of the guide, booted into recovery and the installed the JellyBam ROM.
After that my phone never loaded pass the Samsung Galaxy S II (with yellow triangle) screen and for some reason i can not load into recovery anymore! loading to download mode works fine. I did some searching on the web and some people where suggesting installing ClockMod once again, but this did not help either!
i was wondering am i doing the right thing or my phone is just dead!
ozeeo said:
Hello all,
i tried installing the JellyBam ROM last night and things went ugly somehow. I had installed the good old CM10 a weak ago with ClockWorkMod! it was running perfectly except i had antenna/reception problems so i thought i give another rom a shot. followed every step of the guide, booted into recovery and the installed the JellyBam ROM.
After that my phone never loaded pass the Samsung Galaxy S II (with yellow triangle) screen and for some reason i can not load into recovery anymore! loading to download mode works fine. I did some searching on the web and some people where suggesting installing ClockMod once again, but this did not help either!
i was wondering am i doing the right thing or my phone is just dead!
Click to expand...
Click to collapse
1) which JB rom u tried to install provide info about it.
2) do u have the backup of ur earlier rom.
3) if so then flash 'Siyah kernel v4.1.5' .tar file from ODIN, then boot to recovery and restore ur bkp and see
Sun90 said:
1) which JB rom u tried to install provide info about it.
2) do u have the backup of ur earlier rom.
3) if so then flash 'Siyah kernel v4.1.5' .tar file from ODIN, then boot to recovery and restore ur bkp and see
Click to expand...
Click to collapse
Thanks for the reply!
1. i tried to install JellyBam.AOKP.20121005-DAILY-i9100G.
2. i do not have any back up! but i can not get into recovery mode so how could this work? unless your talking about a different back up.
ozeeo said:
Thanks for the reply!
1. i tried to install JellyBam.AOKP.20121005-DAILY-i9100G.
2. i do not have any back up! but i can not get into recovery mode so how could this work? unless your talking about a different back up.
Click to expand...
Click to collapse
is ur phone model i9100 or i9100G ?
1.Flash to stock ICS through Odin3 http://forum.xda-developers.com/showthread.php?t=1544487
2.Then flash Siyah again through Odin http://forum.xda-developers.com/showthread.php?t=1555259
3. Flash JellyBam but the i9100 one not the G.(If u got i9100 not i9100G)
4. Fatory reset.
5. Reboot.
5. Enjoy.
6. Thank me :highfive:
Thanks a lot Sourabh007, that worked! and thanks Sun90 for the tip! yea i was really sleepy and made a really stupid mistake of installing i9100G ROM on my international SII (yea i know, dont say anything)!
But i followed through the instructions of Sourabh007 and it worked perfectly! Installed JellyBam AOKP, seems to be a little heavier and slower than CM10. and unfortunately just like CM10 im still having very poor antenna/reception most of the time. so i have to fix that somehow.
BTW im loving the Siyah kernal, going to give the dual boot option a try later.
Ok before we start, I have looked and tried everything I can find so I will post what I have done after I post my issue. (I know I'm new but I've been using this site a lot lately I just never signed up)
Alright.
My S2 gt-i9100 running ICS 4.0.3 XXLPB
I can root it with cf mod, no problem and confirmed that the root is working properly.
I use CWM recovery. Every single time I've tried to flashboot a custome rom, from Res Remix to straight up cm10 to other jelly bean mods, all the "top" mods suggested in articles, though it says successful, It always, always gets stuck on the Galaxy s2 screen with the yellow triangle. It does not go black, it just stays on that screen, I've left it for as long as 2 hours and it does not do anything and does not let me back into recovery mode. (download mode yes)
I have, multiple times, re-installed stock rom, re-rooted etc...
cleared cache and davik cache, factory reset and format system (prior to flashing the custome roms and sometimes right after as some suggest)
I even tried a complete wipe of the sd card, system, then reflashed stock rom. It always works to return to stock rom and to root it, but nothing else. It seems every solution I find on this site, and many others are point to the above things I have tried all with a slight variety. I have tried many different custom roms,
I'm lost what to do next? I can't find any other information, my binary count is up to 18 now and none of it has worked.
Which kernel are you using?
tejasrm said:
Which kernel are you using?
Click to expand...
Click to collapse
I'm sorry, I thought I mentioned all the info I had.
My current kernel version for ICS is 3.0.15-I9100XXLPB
The kernels I have tried when booting res remix are both Dormanx(sp?) and CM10.1, also tried cm10.1 with another rom.
Sorry I added info, not sure which one you wanted
bbnuck said:
I'm sorry, I thought I mentioned all the info I had.
My current kernel version for ICS is 3.0.15-I9100XXLPB
The kernels I have tried when booting res remix are both Dormanx(sp?) and CM10.1, also tried cm10.1 with another rom.
Sorry I added info, not sure which one you wanted
Click to expand...
Click to collapse
1) re- install stock ICS 4.0.3 rom vide ODIn.
2) use the tar file of siyah kernel v4.1.5 or 5.0.1 to root ur phone vide Odin.
3) now use the siyah kernel v4.1.5/5.0.1 recovery to flash any custom rom of ur choice by fallowing the install instruction of the same carefully
Sun90 said:
1) re- install stock ICS 4.0.3 rom vide ODIn.
2) use the tar file of siyah kernel v4.1.5 or 5.0.1 to root ur phone vide Odin.
3) now use the siyah kernel v4.1.5/5.0.1 recovery to flash any custom rom of ur choice by fallowing the install instruction of the same carefully
Click to expand...
Click to collapse
ohh, yes the Siyah kernel, I failed to mention that i tried rooting using the siyah kernel early on and it would get stuck on the boot screen and even ICS wouldn't work. now on the other hand, this was one of my early attempts and i've tried everything else twice so I will try this option again and get back thanks
I have now tried to boot kernel Siyah 5.0.1 twice and it gets stuck on the kernel boot screen after the samsung s2 screen (the one with the yellow triangle) The screen is a ying-yang symbol with pink/purple lighting. I have left it on for 10 minutes and it stays on that screen. I have removed the battery and put it back in and now it doesn't even get past the s2 bootup screen, I left it for a couple minutes, still nothing. Reboot the phone again and now it's in Kernel Panic Upload Mode... Going back to stock rom. I'll try to find a 4.1.5 siyah kernel and try that one and see if it does anything different.
Sun90 said:
1) re- install stock ICS 4.0.3 rom vide ODIn.
2) use the tar file of siyah kernel v4.1.5 or 5.0.1 to root ur phone vide Odin.
3) now use the siyah kernel v4.1.5/5.0.1 recovery to flash any custom rom of ur choice by fallowing the install instruction of the same carefully
Click to expand...
Click to collapse
Alright, after what happened in the previous message, I have download siyah kernel 4.1.5 and have attempted to flash via odin to root my phone. It did not work either, same issue as 5.0.1. back to stock rom/rooted with cf-root
Try dorimanx ver. 7+ tar or zip
Sent from my GT-I9100 using xda premium
stopro said:
Try dorimanx ver. 7+ tar or zip
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Just tried dorimanx version 7.50, gets stuck on the bootlogo screen, similar to what siyah was doing.
edit: Also tried dorimanx 8.1, same thing.
Edit: Tried dorimanx 8.3, flashed through cwm recovery this time, still does the same thing
Mate OK download gskernel viper script download syiah 4+ flash boot should work
Sent from my GT-I9100 using xda premium
stopro said:
Mate OK download gskernel viper script download syiah 4+ flash boot should work
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
hi, i have a problem close to the problem here. i recently soft bricked my phone ,sgs2 gti9100 with jellybean 4.1.2. so i tried installing a custom rom named neatrom. after installation the phone reboots and stays in the flashing android sign. it stays like that until the battery runs out. do you think i should change kernals or flash stock rom?
Najahmas said:
hi, i have a problem close to the problem here. i recently soft bricked my phone ,sgs2 gti9100 with jellybean 4.1.2. so i tried installing a custom rom named neatrom. after installation the phone reboots and stays in the flashing android sign. it stays like that until the battery runs out. do you think i should change kernals or flash stock rom?
Click to expand...
Click to collapse
hi mate sorry for late answer but first instal good stock rom by odin then instal best out there kernel for s2 dorimanx but there is 3 versions of it 8.x for stock 9.x mali v2 mean old jb and 10.x mali v3 for latest jb and kk good luck
Najahmas said:
hi, i have a problem close to the problem here. i recently soft bricked my phone ,sgs2 gti9100 with jellybean 4.1.2. so i tried installing a custom rom named neatrom. after installation the phone reboots and stays in the flashing android sign. it stays like that until the battery runs out. do you think i should change kernals or flash stock rom?
Click to expand...
Click to collapse
And don't forget to go in recovery mode and wipe out the dalvik memory under advanced. After wiping dalvik/clearing user data and formatting your phone, reinstall the rom of your choice (that's compatible with the phone)
you can also install siyah 6 and flash kitkat directly from recovery.
Then it would use kitkats kernel and bootup the rom
thank you guys for your replys. i will try what you suggested and get back to you
[Solved]
I am unable to flash any roms through cwm, and can only do it through odin. Flashing through cwm results in the phone not loading past the boot logo.
I formatted sd card in cwm, thinking it would only restore to factory settings, not knowing it would completely wipe everything.
From then i was unable to even see the boot logo or recovery mode, but luckily download mode still worked.
So i flashed the stock rom through odin, but it still plays up. Now the battery doesn't last more than 1 day, and constantly freezes.
Now whenever i install anything in cwm, as soon as i reboot, it goes to the bootscreen and freezes. I have tried at least 5 different roms and the same story each time, So each time i have to reflash stock rom with odin.
So any ideas to why this is? any help is appreciated. I have tried ultimate kernel wipe cleaner , or whatever it is called as well.
[Solved]
I just reflashed stock ICS in odin, and ticked the 're-partition' box. the repartition file is called " u1_02_20110310_emmc_EXT4.pit ". Now it works good as new and I'm currently running PACman rom on 4.3. gg guys.
Just to check, but you have factory reset after flashing the new ROM from CWM right?
Try these steps :
1. Flash ROMNuke script by hawkerpaul. (it's a ROM nuke, not just a kernel nuke)
2. Flash ROM in CWM.
3. Boot.
I know it sounds simple, but that's got me out of a few odd bootloop /failed flash situations. Give it a go.
Then, if that doesn't work, re-download the ROM which you're attempting to flash & try again.
One more thing, what kernel are you trying to flash the ROM from in CWM? Try a different one, say siyah. I've sometimes seen where a particular kernel won't flash but another will for no apparent reason.
Sent from a galaxy far, far away
Hopper8 said:
Just to check, but you have factory reset after flashing the new ROM from CWM right?
Try these steps :
1. Flash ROMNuke script by hawkerpaul. (it's a ROM nuke, not just a kernel nuke)
2. Flash ROM in CWM.
3. Boot.
I know it sounds simple, but that's got me out of a few odd bootloop /failed flash situations. Give it a go.
Then, if that doesn't work, re-download the ROM which you're attempting to flash & try again.
One more thing, what kernel are you trying to flash the ROM from in CWM? Try a different one, say siyah. I've sometimes seen where a particular kernel won't flash but another will for no apparent reason.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
it was stock ics cwm i think?, also another thing when I install a new rom, when it shows the progress bar, it goes up to 3 quarters then it skips the rest and says update completed (I just tried Romnuke and same story). I have also tried siyah kernel and it just freezes at the siyah kernel instead. Im currently stuck on stock ICS 4.0.2
Not sure what you mean by 'stock ICS CWM'?
And just to make sure, you definitely have an i9100 right? Not a variant, i9100g etc? Just asking as 4.0.2 was never released for i9100, only 4.0.3 and 4.0.4 (stay away from that one)
So now, re-download the ROM which you're attempting to flash, and try again after the ROMNuke script. Does the script run successfully? Or does it have errors /messages which indicate it didn't run successfully?
Sent from a galaxy far, far away
Hopper8 said:
Not sure what you mean by 'stock ICS CWM'?
And just to make sure, you definitely have an i9100 right? Not a variant, i9100g etc? Just asking as 4.0.2 was never released for i9100, only 4.0.3 and 4.0.4 (stay away from that one)
So now, re-download the ROM which you're attempting to flash, and try again after the ROMNuke script. Does the script run successfully? Or does it have errors /messages which indicate it didn't run successfully?
Sent from a galaxy far, far away
Click to expand...
Click to collapse
my bad it is 4.0.3, it is definitely only gt-i9100, and in recover mode it says CWM-based Recover v5.0.2.7
kobe24lebron23jordan said:
my bad it is 4.0.3, it is definitely only gt-i9100, and in recover mode it says CWM-based Recover v5.0.2.7
Click to expand...
Click to collapse
All good. And also good that you have an i9100.
Ok, so have you tried the things I said?
1. Try flashing from a different kernel (your choice, try one other than Siyah)
2. Re-download the ROM & reflash with Nuke script then ROM.
[Solved]
5 months later I found the answer when messing with odin. What you do is tick the 're-partition' box, and then in the 'pit' sections you need the partition file i guess, for the i9100 its called u1_02_20110310_emmc_EXT4.pit . hope this helps anyone else who may have this problem
Hi, i'm new in these things so have a few questions.
Iwould like to flah thecyanogenmod but my galax 2s syas it is not a gt-I9100.
So i read some things about removing the assert line from a script and so on.
Do i need to flah an older rom before the cm11 nightly?
Do i need to flash the kernel first? or just use the latest cwm? (or rom manager/clockword?)
Can i reflash the S2 with an cyanogenmod kitkat version after i flashed it with an other kitkat rom for this device?
(still i did not succed to flash any rom to it)
thanks for any help !
JJSJJS said:
Hi, i'm new in these things so have a few questions.
Iwould like to flah thecyanogenmod but my galax 2s syas it is not a gt-I9100.
So i read some things about removing the assert line from a script and so on.
Do i need to flah an older rom before the cm11 nightly?
Do i need to flash the kernel first? or just use the latest cwm? (or rom manager/clockword?)
Can i reflash the S2 with an cyanogenmod kitkat version after i flashed it with an other kitkat rom for this device?
(still i did not succed to flash any rom to it)
thanks for any help !
Click to expand...
Click to collapse
First of all check if it g version or not.
To best of my understanding you can install it directly as far as you are rooted.
Sent from my GT-I9100 using xda premium
You don't need to flash an older version before KK. You just need KK compatible recovery. Or you can flash a KK compatible kernel, reboot to recovery and flash your KK rom.
Hello, thank you both for your replies.
Finally some clear answers
The model says GT-I9100 and not with g behind it, thanks.
I found some things about the status 7 error and about removing some line in a script in the zip.
So i will try the kitkat recovery (in my understanding this is also the kernel?) and then flash it with kitkat rom.
I would like to flash the one from cyangenmod, but doe it really mather which custom kitkat rom i take? At least they are all without the providers code like Vodafone or others?
Thanks again. I will update the thread if it succeeds or not.
Hi,
so i could not install the latest Recovery_CWM_6.0.4.7_I9100.zip as it gave an error E: signature verification failed.
then i tried recovery-clockwork-touch-5.8.1.5-galaxys2.zip and this works. But with this i can't install CM11. as i get the status 7 error.
So i will try some other versions kitkat compatible.
I also took a look at the kernels section but it is not clear wich one to use for CWM6 as i don't know what XXLSR or DDLS3 means, and which is correct for Netherlands.
Do you have any idea? (i am not allowed to post there yet)
Thanks for your help.
For choice of kernel -
1. Gustavo's - I don't remember the version. Check the op.
2. Dorimanx - you can try 10.43v100.
3. Apollo - 7.0b Cm
They will bring the KK compatible recovery you want on your phone. Then after rebooting to recovery you can flash any custom rom as they are not locked by any carriers.
banjara said:
For choice of kernel -
1. Gustavo's - I don't remember the version. Check the op.
2. Dorimanx - you can try 10.43v100.
3. Apollo - 7.0b Cm
They will bring the KK compatible recovery you want on your phone. Then after rebooting to recovery you can flash any custom rom as they are not locked by any carriers.
Click to expand...
Click to collapse
Thank you very much Banjara !
i'll keep trying, will report if i succeed
oh oh no good.....
JJSJJS said:
Thank you very much Banjara !
i'll keep trying, will report if i succeed
Click to expand...
Click to collapse
oh boy oh boy
i followed this http://forum.xda-developers.com/galaxy-s2/development/kernel-lazing-safe-stock-kernels-t2293576
and now it is stuck on boot screen, can't even reboot in recovery mode to get the back rom back pfffff
what should i do now......even the usb cable aint working, i'm flashing to the external sdcard via an other phone and the replace the sdcard to the galaxy s2
thanks for any help :crying::crying::crying::crying::crying:
JJSJJS said:
oh boy oh boy
i followed this http://forum.xda-developers.com/galaxy-s2/development/kernel-lazing-safe-stock-kernels-t2293576
and now it is stuck on boot screen, can't even reboot in recovery mode to get the back rom back pfffff
what should i do now......even the usb cable aint working, i'm flashing to the external sdcard via an other phone and the replace the sdcard to the galaxy s2
thanks for any help :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you are able to go back to download mode
1. Flash a stock rom via odin
2. Flash a custom kernel via Odin. You might find some in the link you put there or you can search for hirox kernel. Remember, you have to download Odin flash able kernel and follow the op.
3. Once you have custom kernel, reboot to recovery. Flash any of the kernels in clockworkmod mentioned in my previous post.
4. Reboot to recovery. Flash your rom.
If you are unable to go to download mode try all the methods mentioned in the below link to bring it back to normal. It will need patience and perseverance. http://forum.xda-developers.com/galaxy-s2/general/guide-t2345831
Thank you for your patience and your help Banjara.
This forum and it's people are 100 times better the on Gyanomed were totally no support is given...
I will try it and come back, at least the phone able to start in the download mode.
Probably the usb connector has some loose contacts as i can get no contact with pc.
I got this phone from my brother and he told me that it never worked, just loading the battery
So i tried an other cable from an cheap android pad, but also no luck
maybe tommorow, i have another cable from an android stick pc at my job, maybe it will work
else i have to open it to check the connector under a microscope and probably resolder(hotair) it with a lot of flux... what a pitty... :crying:
lucky i have some experience on it, i repaired a lot of qtek phone, some years ago, always that connector broken.
I'm originally an tv(crt,lcd,plasma) repair technician, but now on an other job
Pfew, i managed to rsolder the connector with help of the microscope on my job.
I could even connect to odin. so that's is good progression. i had a wrong kernel downloaded, so it failed.
now i have the correct one and will use Siyah-s2-v6.0b5.tar
But unfortunately the battery is really emptying quickly when it stays in the phone, i don't know why.
So i will have to charge it an then give it another try with this kernel.
The ROM should still be original as i did not flash it before, just the kernel.
The phone is now saying battery empty, can't download.
To be continued...
Jippieeee!
GREAT !!!!
It worked! flashed the kernel Siyah-s2-6.0b5 and it started ! :victory:
Now what is the best way to proceed, there are so many topics on this it is overwhelming.
Should i first flash a Kernel or first a rom?
Can i flash them right after each other? (kernel reboots) so ROM and directly Kernel in one go?
thanks for your help!
{SOLVED}
Ok this is solved, thank you guys and dolls !
i managed to flash the cwm 6++++ and then the OMNI kitkat (latest) and the gAPPs
and it is working ! i am verry happy ! :laugh::laugh::laugh::laugh::laugh:
:thumbup::beer::beer:
one more thing
i noticed there is also another kernel now in the phone.
How to get rid of the yellow exclamation mark?
i saw some footage on youtube how to do it with the correct kernel.
But can i also extract the kernel from the ROM.tar i used and flash it with Odin?
Or is there another way?
thanks for your help. ---> edit
ok found some here: http://forum.xda-developers.com/galaxy-s2/orig-development/30-10-2012-k-la-lp-t1103399
but is it also good enough to unroot your device or are some functionality's then lost when using OMNI- rom ?
Thanks for your help
there arent any funcions lost it just gives your phone informations so that it thinks its all fine and dont displays the yelow horror . Btw i used TWRP KK kernel on my gs2 and installed prerooted rom aosp neatrom 5.8 kk and dont have problems with triangle. Also neatrom 4.1.2 with extended battery life is there if you dont like kitkat =D
Radelos said:
there arent any funcions lost it just gives your phone informations so that it thinks its all fine and dont displays the yelow horror . Btw i used TWRP KK kernel on my gs2 and installed prerooted rom aosp neatrom 5.8 kk and dont have problems with triangle. Also neatrom 4.1.2 with extended battery life is there if you dont like kitkat =D
Click to expand...
Click to collapse
Thanks Radelos, then i will try to unroot it again. And that will be it then.
Now using the OmniKK nightly of 8th of june, it runs very smooth, no issues till now, all is working well. :good:
btw idk what is the exact rom your willing to use but for no triangle would also do an clean install of stock rom, then root with framroot that you can find here on site and then flash KK compatible recovery and ofc kk rom with it. Here is the rom i used, its prerooted and on first boot starts direct into recovery so its for lazy ppl =D factory format data/system then flash TWRP touch recovery and in cwm reboot recovery option. And then just flash rom
Rom
http://uloz.to/x13p4YVr/drhd-base-lpq-re-light-tar
KK TWRP touch recovery
http://uloz.to/xyw9UkTk/kk-kernel-21-04-twrp-zip
Radelos said:
btw idk what is the exact rom your willing to use but for no triangle would also do an clean install of stock rom, then root with framroot that you can find here on site and then flash KK compatible recovery and ofc kk rom with it. Here is the rom i used, its prerooted and on first boot starts direct into recovery so its for lazy ppl =D factory format data/system then flash TWRP touch recovery and in cwm reboot recovery option. And then just flash rom
Rom
http://uloz.to/x13p4YVr/drhd-base-lpq-re-light-tar
KK TWRP touch recovery
http://uloz.to/xyw9UkTk/kk-kernel-21-04-twrp-zip
Click to expand...
Click to collapse
So with this process, will there be no yellow triangle?