When flash was full, HTC titan began freezing at random places, I deleted some pictures/videos/apps, looks okay until during charging it suddenly reboots and now it is stuck at bootloader HTC screen, I did hard reset, same thing, factory reset, one of 3 tries of factory reset, I can get to windows however only basic phone call works, everything else crashes. The other 2 out of 3 hard reset attempts, either stuck at installing apps (during the initial setup phase), or stuck at HTC logo.
Finally out of options, I tried to use RUU (ROMUpdateUtility.exe) with the downloaded original US Cingular ROM (Original named IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE.nbh renamed to ETERIMG.nbh in order to flash), and got same crash/freeze as above. By the way I did verify the SPL bootloader matched the ROM.
Contacted HTC support, they say I have to send it for repair if I want to go that route, anyone know how much they charge? Mine is out of warranty. Only 1.5 years!
Right now it is stuck at installing apps again, and it seems getting harder and harder to get past that stage in order to have basic phone call functionality.
Try to boot phone without any sim card and give feedback
Sent from my GT-I9205 using xda app-developers app
jopa7 said:
Try to boot phone without any sim card and give feedback
Sent from my GT-I9205 using xda app-developers app
Click to expand...
Click to collapse
Hi, thanks for reply. Results are the same as before except it gives warning SIM ERROR when there's no sim card.
sf3000 said:
When flash was full, HTC titan began freezing at random places, I deleted some pictures/videos/apps, looks okay until during charging it suddenly reboots and now it is stuck at bootloader HTC screen, I did hard reset, same thing, factory reset, one of 3 tries of factory reset, I can get to windows however only basic phone call works, everything else crashes. The other 2 out of 3 hard reset attempts, either stuck at installing apps (during the initial setup phase), or stuck at HTC logo.
Finally out of options, I tried to use RUU (ROMUpdateUtility.exe) with the downloaded original US Cingular ROM (Original named IMG_Eternity_Cingular_US_1.10.502.04_Radio_16.23.02.26_A_16.27.00.23_Signed_ETERNITY_RELEASE.nbh renamed to ETERIMG.nbh in order to flash), and got same crash/freeze as above. By the way I did verify the SPL bootloader matched the ROM.
Contacted HTC support, they say I have to send it for repair if I want to go that route, anyone know how much they charge? Mine is out of warranty. Only 1.5 years!
Right now it is stuck at installing apps again, and it seems getting harder and harder to get past that stage in order to have basic phone call functionality.
Click to expand...
Click to collapse
Stop please! You need to tell us what exactly do you mean when your flash is full...your internal memory? It appears by your 2nd paragraph you're attempting to HSPL your device. If you're stuck at the HTC Logo it normally means you're using the wrong radio firmware for the rom; my device for example is HSPL...I will never forget the effort I put into that feat, but the radio had to be changed to version 17 not 16 though you will find roms that will operate on 16, so let's start with what exactly are you trying to do...thanks!
berrywr said:
Stop please! You need to tell us what exactly do you mean when your flash is full...your internal memory? It appears by your 2nd paragraph you're attempting to HSPL your device. If you're stuck at the HTC Logo it normally means you're using the wrong radio firmware for the rom; my device for example is HSPL...I will never forget the effort I put into that feat, but the radio had to be changed to version 17 not 16 though you will find roms that will operate on 16, so let's start with what exactly are you trying to do...thanks!
Click to expand...
Click to collapse
The Titan was untouched, unmodded, fully functional. Then over time ts internal flash drive (16GB) became totally full.
Deleted some pictures/videos from within Zune software, uninstalled some apps and I get back 1GB or 2GB.
Recharged again then during this recharging period, it rebooted, ever since then, it became the state as I described in original post.
Sometimes stuck at HTC logo, sometimes after another factory reset (accessed from vol up + vol down + power HSPL menu),
The radio was 16, and the RUU program indicated it installed the 389(?)MB rom successfully, I made sure I downloaded the original cingular rom that had same radio 16 number.
Just trying to get Titan alive again, not even attempting custom firmware. From what I read on the forum, I will need USB-Y cable + goldcard
to install custom stuff. However I believe the RUU program I used allows flashing of stock ROM.
sf3000 said:
The Titan was untouched, unmodded, fully functional. Then over time ts internal flash drive (16GB) became totally full.
Deleted some pictures/videos from within Zune software, uninstalled some apps and I get back 1GB or 2GB.
Recharged again then during this recharging period, it rebooted, ever since then, it became the state as I described in original post.
Sometimes stuck at HTC logo, sometimes after another factory reset (accessed from vol up + vol down + power HSPL menu),
The radio was 16, and the RUU program indicated it installed the 389(?)MB rom successfully, I made sure I downloaded the original cingular rom that had same radio 16 number.
Just trying to get Titan alive again, not even attempting custom firmware. From what I read on the forum, I will need USB-Y cable + goldcard
to install custom stuff. However I believe the RUU program I used allows flashing of stock ROM.
Click to expand...
Click to collapse
I was going to recommend Goldcard and it works perfect! You're stock so you need a stock ROM. Double check your model #, mine for example are PI39100s. I HSPL'd my Titans via Goldcard. You might want to attempt the HSPL process if you're nuts enough to try it. But be aware you will need the correct debranding ROM to do so. But for your purposes, you need "stock". I was really surprised how easy the Goldcard method is...it picks it up right out the blocks and you follow the prompts.
berrywr said:
I was going to recommend Goldcard and it works perfect! You're stock so you need a stock ROM. Double check your model #, mine for example are PI39100s. I HSPL'd my Titans via Goldcard. You might want to attempt the HSPL process if you're nuts enough to try it. But be aware you will need the correct debranding ROM to do so. But for your purposes, you need "stock". I was really surprised how easy the Goldcard method is...it picks it up right out the blocks and you follow the prompts.
Click to expand...
Click to collapse
The RUU.exe works with stock firmware reflashing already, so when I tried it it was stuck at 4% complete for a minute, then 67% for 30 sec, then 87% for 30 sec, then finally complete 100% successfully, then after reboot, it enters the setup stage and stuck at installing apps again even after 10 minutes. There's something wrong with the phone, so weird, maybe a hammer will do the trick.
this is where i got stock rom (googled htc rom)
http://www.persianhtc.net/index.php?dir=Titan(Eternity)(Bunyip)(Ultimate)/rom/original/nbh/
Maybe I will try another stock rom, IMG_Eternity_Cingular_2.01.502.04_Radio_16.23.03.17_16.27.00.23U_OS_7.10.7740.166.nbh and see what happens.
sf3000 said:
this is where i got stock rom (googled htc rom)
http://www.persianhtc.net/index.php?dir=Titan(Eternity)(Bunyip)(Ultimate)/rom/original/nbh/
Maybe I will try another stock rom, IMG_Eternity_Cingular_2.01.502.04_Radio_16.23.03.17_16.27.00.23U_OS_7.10.7740.166.nbh and see what happens.
Click to expand...
Click to collapse
Bear with me for a moment...I own a HD2 which is a joy to flash Android and Windows Phone or the both of them, WP on NAND and Android on SD. I've had devices dating back to Windows Mobile 6.1 and flashing my Titans is identical to flashing all the rest of them once you're developer/interop unlocked to do so. As the HD2s age, their internal ROM become corrupted so the gurus here came up with NativeSD, now I realize were talking about two different animals here but when you flash a Windows Mobile/Phone operating system you reformat and erase whatever it is to be installed on; it doesn't matter if its micro sd memory cards or internal rom. I don't know if there is an equivalent Task 29 (wipes the memory) for the Titan's internal rom or is it even necessary; it's standard procedure on the HD2 via the HD2 Toolkit. I want you to do me a favor and send me what is on your bootloader screen, specifically the SPL, I'm thinking it's 2.05 but there are some others running around too. It is clear you can flash, but when I'm hung on the HTC logo it's the radio that is wrong, so please double check that the radio is correct. I'm not aware there are any radio 17s out there on stock but I am by no means an expert at all of this. Know this, there is the real possibility that you have a corrupted internal memory and where it is corrupted or fragmented is a big deal. I'm asking myself can the memory be erased before flashing and I don't have that answer. The roms you're using suggest you're not using a Windows Phone 7.8 stock Rom, but neither do I know if there is a stock flashable 7.8 Rom; I have the debrand 7.0s but none of the Mango 7.5s; I only have the flashable custom 7.8s but will look later this evening for one. I realize I may have asked you this before but please let me know what your model number, SPL, radio, and verify one more time if upon completion of the rom install does the phone reboot automatically after initial setup...the language, time, date, you hit next and start installing apps...is it the first install apps or afterwards where you hit next before you get to the start menu for the very first time. If at all possible do you remember inside your settings, under "about" how much memory you had, and how much was available. Thanks!
sf3000 said:
this is where i got stock rom (googled htc rom)
http://www.persianhtc.net/index.php?dir=Titan(Eternity)(Bunyip)(Ultimate)/rom/original/nbh/
Maybe I will try another stock rom, IMG_Eternity_Cingular_2.01.502.04_Radio_16.23.03.17_16.27.00.23U_OS_7.10.7740.166.nbh and see what happens.
Click to expand...
Click to collapse
_________________________________
|
| PI3910
| SPL-2.1.160015.3(133679)
| eMMC SMS 15028MB, FA32
| TOUCH A1(F:81,ID:1,V11,B:F8)
|
| Radio-16.23.03.17
|
| Serial
| APPSBL
|
| IMG CRC
| FACTORY RESET
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is what it looks now after succesfully flashing the IMG_Eternity_Cingular_2.01.502.04_Radio_16.23.03.1 7_16.27.00.23U_OS_7.10.7740.166.nbh
That means it upgraded successfully to a more updated Cingular stock rom, if I can use RUU to flash stock rom again
and again, it means writing internal flash is okay(?), but reading internal flash becomes problematic. I noticed
recently I can't even get to setup screen.
berrywr said:
Bear with me for a moment...I own a HD2 which is a joy to flash Android and Windows Phone or the both of them, WP on NAND and Android on SD. I've had devices dating back to Windows Mobile 6.1 and flashing my Titans is identical to flashing all the rest of them once you're developer/interop unlocked to do so. As the HD2s age, their internal ROM become corrupted so the gurus here came up with NativeSD, now I realize were talking about two different animals here but when you flash a Windows Mobile/Phone operating system you reformat and erase whatever it is to be installed on; it doesn't matter if its micro sd memory cards or internal rom. I don't know if there is an equivalent Task 29 (wipes the memory) for the Titan's internal rom or is it even necessary; it's standard procedure on the HD2 via the HD2 Toolkit. I want you to do me a favor and send me what is on your bootloader screen, specifically the SPL, I'm thinking it's 2.05 but there are some others running around too. It is clear you can flash, but when I'm hung on the HTC logo it's the radio that is wrong, so please double check that the radio is correct. I'm not aware there are any radio 17s out there on stock but I am by no means an expert at all of this. Know this, there is the real possibility that you have a corrupted internal memory and where it is corrupted or fragmented is a big deal. I'm asking myself can the memory be erased before flashing and I don't have that answer. The roms you're using suggest you're not using a Windows Phone 7.8 stock Rom, but neither do I know if there is a stock flashable 7.8 Rom; I have the debrand 7.0s but none of the Mango 7.5s; I only have the flashable custom 7.8s but will look later this evening for one. I realize I may have asked you this before but please let me know what your model number, SPL, radio, and verify one more time if upon completion of the rom install does the phone reboot automatically after initial setup...the language, time, date, you hit next and start installing apps...is it the first install apps or afterwards where you hit next before you get to the start menu for the very first time. If at all possible do you remember inside your settings, under "about" how much memory you had, and how much was available. Thanks!
Click to expand...
Click to collapse
I did double/triple check radio is 16 for my very original stock rom and the roms I downloaded all have radio 16 as part of filename.
Model: PI39100
SPL: Original: 1.10, now is 2.1
Right now can't even get to setup screen now, it used to be 1 out 3 hard resets I can reach that stage, now it always reboots
after it failed to get past Windows logo stage (which happens about 8~20sec after HTC logo and AT&T logo stage)
sf3000 said:
_________________________________
|
| PI3910
| SPL-2.1.160015.3(133679)
| eMMC SMS 15028MB, FA32
| TOUCH A1(F:81,ID:1,V11,B:F8)
|
| Radio-16.23.03.17
|
| Serial
| APPSBL
|
| IMG CRC
| FACTORY RESET
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is what it looks now after succesfully flashing the IMG_Eternity_Cingular_2.01.502.04_Radio_16.23.03.1 7_16.27.00.23U_OS_7.10.7740.166.nbh
That means it upgraded successfully to a more updated Cingular stock rom, if I can use RUU to flash stock rom again
and again, it means writing internal flash is okay(?), but reading internal flash becomes problematic. I noticed
recently I can't even get to setup screen.
I did double/triple check radio is 16 for my very original stock rom and the roms I downloaded all have radio 16 as part of filename.
Model: PI39100
SPL: Original: 1.10, now is 2.1
Right now can't even get to setup screen now, it used to be 1 out 3 hard resets I can reach that stage, now it always reboots
after it failed to get past Windows logo stage (which happens about 8~20sec after HTC logo and AT&T logo stage)
Click to expand...
Click to collapse
My apologies that I haven't replied sooner; I'm a full time college student thus I'm a bit busy. If your SPL is 2.1 then you have not successfully installed the Cingular 1.10 ROM otherwise your SPL would read 1.10 which this ROM and the European 1.09 ROM are used to downgrade the SPL on the Titan for HSPL and custom ROM flashing...which you've made me aware that is not what you're attempting to do but it is one of the steps towards doing just that. I'm going to attach my notes on my HSPL of my device which is extensive. There might be something in it that might help you. But for example my bootloader reads: PI39100...HSPL2.5.160015.3(137079)...eMMC SND 15188MB...CotullaH(F:81, ID:1,V11, B:f8)...double space...Radio-17.5006.08.27. I realize you're not trying to HSPL but if you are able to get your SPL to read 1.10, I think you should try it, the worse that can happen to you is the SPL will read SPL2.5.160015.3 not HSPL2.5.160015.3. I still recommend the Goldcard Method. My notes will be attached as a Word file.
berrywr said:
My apologies that I haven't replied sooner; I'm a full time college student thus I'm a bit busy. If your SPL is 2.1 then you have not successfully installed the Cingular 1.10 ROM otherwise your SPL would read 1.10 which this ROM and the European 1.09 ROM are used to downgrade the SPL on the Titan for HSPL and custom ROM flashing...which you've made me aware that is not what you're attempting to do but it is one of the steps towards doing just that. I'm going to attach my notes on my HSPL of my device which is extensive. There might be something in it that might help you. But for example my bootloader reads: PI39100...HSPL2.5.160015.3(137079)...eMMC SND 15188MB...CotullaH(F:81, ID:1,V11, B:f8)...double space...Radio-17.5006.08.27. I realize you're not trying to HSPL but if you are able to get your SPL to read 1.10, I think you should try it, the worse that can happen to you is the SPL will read SPL2.5.160015.3 not HSPL2.5.160015.3. I still recommend the Goldcard Method. My notes will be attached as a Word file.
Click to expand...
Click to collapse
Mine was SPL 1.1 before any flashing, now it is 2.1 because I flashed a SPL 2.1 Stock ROM.
Let me try to flash it back to SPL 1.1 again. I am not planning to use custom ROM so I don't think I need a gold card for now.
Used same RUU to flash back to HSPL 1.0 from 2.1, anyway it still looks dead to me. It's a loss.
Anyway thanks everyone for the help.
The weird thing is I can flash back and forth between 1.0 and 2.1, meaning internal flash drive has no issue during writing.
Related
Hi Xda Members,
I'm using HTC HD2 for 6 months.
I've installed Hard SPL first. Then i've upgraded my Radio Rom from 2.07 to 2.12. Then I've installed ChuckyRom and later I changed my rom to EnergyRom.
Now, I'm going to send my HTC HD2 to service and I want to send it with factory settings because of warranty issues.
I need to know;
1. How can I change the boot screen to original one? (The first one which seems when I turn on the phone; it shows ChuckyRom's boot screen now.)
2. How can I erase every clue about custom roms after flashing the shipped rom? Is it possible for them to understand that I had flashed a custom rom before?
3. When I press Volume Down + Start Button i see LEOIMG.nbh and other stuff. Is it possible to erase them? (I've removed the LEOIMG.nbh from SD Card already.)
If you help me I'll be grateful.
Tatenen said:
Hi Xda Members,
I'm using HTC HD2 for 6 months.
I've installed Hard SPL first. Then i've upgraded my Radio Rom from 2.07 to 2.12. Then I've installed ChuckyRom and later I changed my rom to EnergyRom.
Now, I'm going to send my HTC HD2 to service and I want to send it with factory settings because of warranty issues.
I need to know;
1. How can I change the boot screen to original one? (The first one which seems when I turn on the phone; it shows ChuckyRom's boot screen now.)
2. How can I erase every clue about custom roms after flashing the shipped rom? Is it possible for them to understand that I had flashed a custom rom before?
3. When I press Volume Down + Start Button i see LEOIMG.nbh and other stuff. Is it possible to erase them? (I've removed the LEOIMG.nbh from SD Card already.)
If you help me I'll be grateful.
Click to expand...
Click to collapse
I am using Energy rom, couple of months ago I sent my phone back for warranty. I just downloaded the latest rom from HTC site. If I remember correctly it changes hard spl and radio, but i'm not sure of that. Perhaps you need to install normal spl with the spl tool.
I know for sure that it also changed my boot screen to stock(with the red Vodafone boot screen for NL).
Hope this'll help you out a bit! Maybe this'll help too: http://forum.xda-developers.com/showthread.php?t=713977
Just flash a stock ROM from SD card. See forum.xda-developers.com/showthread.php?t=609477
Hi,
After months and months of installing custom ROMs, and I even ran Android for few months, I need to take it to service (I broke the screen).
I have tried (not successfully) to install SPL on it using HSPL3 (info got from here http://forum.xda-developers.com/showthread.php?t=609477). After I have opened HSPL3 and clicked first "Next" button, few seconds later it has generated an error. The phone remained in the 4 color screen showing me the HSPL version I have (SPL-1.42.HSPL XE). From here nothing works (hard reset doesn work, it takes to same screen).
PLEASE help. Nothing I read helped. Phone is unusable now.
Thank you in advance.
PS: I admit I am doing something wrong (since I can not fix it any more)...
[LE: I have copied "RUU_signed.nbh" renamed it, opened Bootloader and I was able to install SPL-1.42.0000. But now I am still stuck in same 4 color screen in the beginning... Hard Reset nor Soft reset do not work.]
Try to star in bootloader mode (vol down + power button), connect usb cable and install HSPL 2.08:
http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
dea.cristi said:
Hi,
I did, this is the screen I see (see attached, apologize for the quality).
And also, I need to install stock ROM.
Click to expand...
Click to collapse
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
One more info your sd card has to be a normal one (1G or 2G) not HC
and after that reinstall hspl let me know if it was working
Regards,
Me
icsulescu said:
Install stock rom from sd card:
Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Did you downloaded the rigth stock rom???
i had similar error trying to install a wwe on a portuguese HD2...
Then i downloaded the portuguese stock rom and worked.
I hope you can recover it.
See ya...
S_Phoenix said:
Did you downloaded the rigth stock rom???
Click to expand...
Click to collapse
I have bought the phone from Romania and this is the ROM I downloaded:
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship
dea.cristi said:
Did that and that is the screen I get. I put a 2GB card, copied the .nbh opened bootloader, and the screen above showed.
Any other thoughts?
Click to expand...
Click to collapse
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
tidus18 said:
I remember someone here few months back also accidentally flashed SPL which give similar error (Stuck at OSPL which you cant flash HSPL due to unsupported version. Means you are stuck with SPL which was not intended for your region/product code). If im not mistaken, you may need to try and flash various version of stock roms with different bundled SPLs (steps to lower version). Meaning, the goal is to slowly step down towards the supported SPL version so that you can flash HSPL and then finally use the right Stock ROM to get your original (out of the box) SPL.
Anyone, please correct me if im wrong. Good luck mate.
Click to expand...
Click to collapse
Yep, it seems this is the problem.
Find the first of the stock roms for the country the phone is locked to and flash it.
But try to flash the complete rom and not only the radio.
Try this older rom:
Code:
http://www.htc.com/ro/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Or this one:
http://www.4shared.com/file/236870807/d9482029/RUU_Leo_HTC_WWE_EastEurope_166.html
Or go here and flash older radios:
http://forum.xda-developers.com/showthread.php?t=611787&highlight=serial
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number. This will ensure that you are only allowed to download a ROM that is allowed on your phone. If you get an invalid message, then you need to try another ROM.
You may have a operator locked phone - you can only flash a O2, Vodafone, T-Mobile, etc ROM.
More ROMS
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
fred_up said:
What you need to do is go to HTC's website, for your area, and try and download ROMs with your phone's serial number.
Click to expand...
Click to collapse
Wish I could... If I enter the serial and try to download I always get the message "not available".
JWhipple said:
Just in case you need it, here's an absolutely HUGE collection of original shipped ROMs for the Leo.
http://shipped-roms.com/shipped/Leo/
Click to expand...
Click to collapse
Thanks for your replies. However, I was able to fix it... by mistake.
After seeing that nothing works I connected the phone while it was showing that screen (4 colors) and I have flashed the stock ROM mentioned by me in previous posts using the flashing tool inside the package. Even if the main condition was to have it sync-ed, I have tried anyway and it worked (it is not sync-ed unless it boots up first).
Now it is functional again and ready for service.
Happy ending eventually.
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
gagi75 said:
thanks for link of roms btw how i now what rom is mine my phone is brand not from some network orange t mobile etc....
Click to expand...
Click to collapse
If you don't know from where your device is coming from, with witch operator it is brand; than you can contact HTC.
And share them your S/N thy will be able to communicate you to witch provider your device is branded.
thanks m8 thanks again
unbricked Vibrates 7 times then freeze
so i did this and unbricked my phone but now my phone will Vibrates 7 times and then freeze???? help me plz
Hello there,
I bought my HTC HD2 two weeks ago, and when I received it, it had a ROM of a 3.14 Version with a Radio of 2.15.50
(RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship). The previous buyer told me he had Android Running on SD Card.
When I started "playing" with the phone, I got a lot of Screen Freezes during any app (Internet, Mail, Facebook). Not only did the screen frooze, but also did the no longer start up properly. Either it didnt hang during the Logo, or when entering the PIN. Even during Hardware resets it frooze sometimes.
As the described ROM from above not the "real" supported ROM for THAT HD2 is, I flashed the original 1.72 Version with a Radio of 2.07.51 (RUU_Leo_TMO_DE_1.72.111.4_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship downloaded directly from HTC.com).
I thought, maybe its the ROMs problem. However, now I face the same problems and start to think the problems are hardware related. Am I correct there, or do you guys have any other thoughts?
Could be hardware related indeed.
Did you try to run your device without SD card?
Sometimes, older SIM cards can also cause trouble.
And finally, what SPL is on your device now? You can check this information in the bootloader screen.
tictac0566 said:
Could be hardware related indeed.
Did you try to run your device without SD card?
Sometimes, older SIM cards can also cause trouble.
And finally, what SPL is on your device now? You can check this information in the bootloader screen.
Click to expand...
Click to collapse
I have a SPL-2.08.0000 (not HSPL). I run it without the SD Card aswell, but i got the same issues. Since I still have warranty on the phone, do u think I should make use of it and send it in? but then I want to make sure, that there are no traces on my phone that I installed some Android NAND versions...
SAME PROBLEM IN MY TMOU-HD2
qadeer123 said:
SAME PROBLEM IN MY TMOU-HD2
Click to expand...
Click to collapse
mine is t-mobile, but a GERMAN t-mobile, I'm not having the US-version. but what did u do? did u get a fix?
now my phone is stuck again in the boot logo, which gives me the perfect opportunity to write down all the details:
R 2.07.51.22~2
G 15.32.50.07U
D 1.72.86525
anything wrong with that? I flashed the rom, which i downloaded directly from HTC.com (the only capable for my phone (TMOU GERMANY))
fastscorpion2010 said:
now my phone is stuck again in the boot logo, which gives me the perfect opportunity to write down all the details:
R 2.07.51.22~2
G 15.32.50.07U
D 1.72.86525
anything wrong with that? I flashed the rom, which i downloaded directly from HTC.com (the only capable for my phone (TMOU GERMANY))
Click to expand...
Click to collapse
Well, you do have the older T-Mob ROM, combined with a newer SPL.
Try to flash SPL 1.66 with the program HSPL2.exe before sending it anywhere, then make a hard reset. Re-try again with the SD card out, in the worst case, there might be some buggy data in the application data folder (if there is one).
Well, you do have the older T-Mob ROM, combined with a newer SPL.
Try to flash SPL 1.66 with the program HSPL2.exe before sending it anywhere, then make a hard reset. Re-try again with the SD card out, in the worst case, there might be some buggy data in the application data folder (if there is one).
Click to expand...
Click to collapse
Thank you. with the SPL 1.66 Windows is running smooth again. But what caused all the crashes in the 3.14 version with SPL 2.08 or in Android NAND Versions with 2.08.HSPL ?? I think if I send my phone in for warranty, they tell me everything is fine with the phone....
fastscorpion2010 said:
Thank you. with the SPL 1.66 Windows is running smooth again. But what caused all the crashes in the 3.14 version with SPL 2.08 or in Android NAND Versions with 2.08.HSPL ?? I think if I send my phone in for warranty, they tell me everything is fine with the phone....
Click to expand...
Click to collapse
The official 3.14 ROM shouldn´t run with any other SPL than 3.03.
NAND ROMs require MAGLDR, and this, on the other hand, requires HSPL 2.08. If there was still a different SPL on your device (which should be checked by the tool, as far as I remember, and therefore, I don´t know if that´s possible), you might have to source of problems.
The 2 major sources of problems are a) a wrong Radio ROM or b) a corrupt SD card, in some rarer cases an older SIM card.
If your system and device are running properly now, I think it might be indeed a waste of time to send it to a service center. If you like, it might be worth to give another try with a proper installation: Put HSPL 2.08 on your device, then Radio ROM 2.15.50.04, then MAGLDR 1.13, and then a nice Android NAND build.
No need to ever boot into Windows once you start all that flashing stuff.
tictac0566 said:
The official 3.14 ROM shouldn´t run with any other SPL than 3.03.
NAND ROMs require MAGLDR, and this, on the other hand, requires HSPL 2.08. If there was still a different SPL on your device (which should be checked by the tool, as far as I remember, and therefore, I don´t know if that´s possible), you might have to source of problems.
The 2 major sources of problems are a) a wrong Radio ROM or b) a corrupt SD card, in some rarer cases an older SIM card.
If your system and device are running properly now, I think it might be indeed a waste of time to send it to a service center. If you like, it might be worth to give another try with a proper installation: Put HSPL 2.08 on your device, then Radio ROM 2.15.50.04, then MAGLDR 1.13, and then a nice Android NAND build.
No need to ever boot into Windows once you start all that flashing stuff.
Click to expand...
Click to collapse
I gave it a try, but for some reason I am unable to flash any rom anymore. I tried to flash it via SD card and via the .exe file through the bootloader. Through the .exe file the process only proceeded until 8 or 10% and aborted. Through the SD-Card it only showed the grew screen for a few seconds and returns to bootloader with "Upgrade ROM code error Please try again"
Apperantly I did something wrong, but I dont know what. Ytd I was still able to flash the original stock windows 1.72 rom from sd card, but even that one is not working anymore.
tictac0566 said:
The official 3.14 ROM shouldn´t run with any other SPL than 3.03.
NAND ROMs require MAGLDR, and this, on the other hand, requires HSPL 2.08. If there was still a different SPL on your device (which should be checked by the tool, as far as I remember, and therefore, I don´t know if that´s possible), you might have to source of problems.
The 2 major sources of problems are a) a wrong Radio ROM or b) a corrupt SD card, in some rarer cases an older SIM card.
If your system and device are running properly now, I think it might be indeed a waste of time to send it to a service center. If you like, it might be worth to give another try with a proper installation: Put HSPL 2.08 on your device, then Radio ROM 2.15.50.04, then MAGLDR 1.13, and then a nice Android NAND build.
No need to ever boot into Windows once you start all that flashing stuff.
Click to expand...
Click to collapse
I also tried installing only the radio rom, but that fails somehow as well. I flashed Radio Rom
Leo_RADIO_2.15.50.14
Leo_RADIO_2.14.50.02
Leo_RADIO_2.12.50.02_2
which i found in this forum http://forum.xda-developers.com/showthread.php?t=611787
they flash to 100% but then I get a message on the phone "Software update failed. Please try again" and the computer says "This Update cannot be used for your PDA Phone. Please check your update Utility.
anyone has any idea?
i dont know what to do anymore, the only flashing that works is hspl. i dont want to try magdlr, since the rom before hat a .51 radio, but i cant flash roms or radios....
i need some help, please.
If you tried everything, and only the official 1.72 ROM runs properly, the last remaining tip would be task 29. But I´m afraid, now that we can exclude almost everything, that the service center might be a good idea.
I would re-flash the latest ROM, which doesn´t perform well as you write, and send the device in to get it fixed.
tictac0566 said:
If you tried everything, and only the official 1.72 ROM runs properly, the last remaining tip would be task 29. But I´m afraid, now that we can exclude almost everything, that the service center might be a good idea.
I would re-flash the latest ROM, which doesn´t perform well as you write, and send the device in to get it fixed.
Click to expand...
Click to collapse
what is task 29? I havent heard about it till yet? I will give it a try. Currently I'm trying all combinaitions to at least get 1.72 to get flashed again. This one isnt flashing either right now.
big news:
I have no idea why it worked but it did.
After flashing the entire night with different methods and ROMs and Radios, I almost gave up, and thought my phone is bricked. However, i didnt touch it at all until this afternoon.
First I run HSPL.2.08 again,
then I tried to flash the Stock ROM via SD didn't work.
then I tried to flash the Stock ROM via USB: here it used to stop at 10% and gave me an error.... this time it stopped at 10% for like 30sec and then continued!!!
So now I put SPL.1.66.0000 again to have it in original condition. Can I send it in under warranty like this? Every trace has been removed, correct?
I still don't know what is wrong with the phone. 48h ago, when nothing worked, the only flashing method which did work was via SD. Then I was at branded T-mobile Windows 6.5 on a 1.72 ROM. (Basically exactly where I am now) However, THEN I tried to flash to a higher ROM (3.14) to have a radio of .50 (to flash MAGDLR etc). but this never succedded and I ended up with one flash error after the other.
For a moment I thought my Radio is broken, since I could not flash any Radio. However all the radios i tried to flash were .50 radios. The radio of the current 1.72 ROM is however a .51 version. Does that mean I have some sort of "Radio-Lock" on my phone?
If anyone has any other ideas, please let me know, but I think I dont wanna flash anything until I get the device back from HTC. However, once it get it back, how do I know that I can flash to the higher ROM again?? I am very cautious and distrustful to my phone right now.
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't.
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
Click to expand...
Click to collapse
Sorry to hear your HD2 is not working right now Skellyyy. I am with T-Mobile so I am not familiar with O2 but do they not have an official ROM on their website? Do you have to download your official ROM from HTC? I tried to pull up the o2 website but for some reason it would not let me pull it up. I went to www.o2.co.uk/ and I got this error message.
Error 502 - Bad Request
The server could not resolve your request for uri: http://www.o2.co.uk/
Click to expand...
Click to collapse
The exe is how you run the update utility for that ROM too by the way. Well atleast it is if you are using a computer to flash it. You have to right click on it and click explore to find tbe RUU file.
Also seeing as you have the EU HD2 why not just download the official update from the T-Mobile website and try it?
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Skellyyy said:
Yeah no I don't think they do. I looked on there and they hadn't got it. I think TMO have it on there website is because there's is a different phone then to the EU one.
Click to expand...
Click to collapse
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
Skellyyy said:
Wouldn't downloading that ROM sort of brick my phone? Or would it not as the EU is compatible with all radio's?
Click to expand...
Click to collapse
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
Skellyyy said:
I know the way you run the .exe then the RUU pops up, but HSPL won't flash anything. I've already tried. I know flashing from the SD works as I've flashed an Artemis ROM from it... but still had the screen.
Click to expand...
Click to collapse
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Skellyyy said:
Hey guys, I had this problem like three weeks ago, then got my phone working but this time it won't. What's happening is that when I boot on it just goes to a blank white screen. I have 2.08.HSPL etc. It usually works after a few battery pulls/soft resets but this time it isn't. I've tried running Task 29's, but they're stuck at 0%.
Everything I try do gets stuck at 0%. Well I've tried running a Stock RUU (RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.0 7U_2.05.51.05_2_Ship.exe) and that got stuck at 0% too. I tried downloading my stock ROM off the HTC site but it says "Sorry, this software download is not suitable for your device." Why isn't it? My phones not a TMO HD2? It's a EU Leo bought from o2 Ireland. Can anybody link me to possibly the UK o2 stock ROM?
I downloaded a stock ROM from here but all that comes with the English WWE version is a .exe and not a .nbh.
I also flashed Artemis' custom ROM from SD card and that flashed etc. but when I tried to boot I get the white screen.
Any help appreciated, thanks.
Click to expand...
Click to collapse
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
T-Macgnolia said:
Good point I have not thought about that. The hole thing about the TMOUS HD2 not being able to flash non TMOUS Radios probably does have something to do with it being there on thier website. This is an effort to keep people from getting confused and downloading the wrong ROM and bricking their phone.
No I don't think just downloading the ROM will brick your HD2, you have to flash it for it to even have a chance to brick it ha ha ha ha..........Just kidding I know what you meant, and no I do not think it will brick your pbone cause you have the EU HD2. You might get some preinstalled T-Mobile apps that you can not use but I think this would be the only side effect. But then again I was thinking you could flash it and then try to reflash your regular ROM as I know that the T-Mobile ROM should fix any issue you are haveing with SPL or the ROM. So maybe then you can get HSPL to flash sucessfully.
I also know if you flash the T-Mobile ROM via SD card it overwrites all, but I think this is the case with any SD card flash of any official ROM. The Artemis ROM is a custom ROM so if you are haveings SPL incompatibility issues it would not fix this as it would take an official ROM flashed via SD to fix that.
Click to expand...
Click to collapse
I've downloaded the RUU_Leo_1_5_TMOUS_2.10.531.1_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship .zip
Let's hope it works.
samsamuel said:
stuck at 0% usually means hspl is no longer there.
what does it say by 'spl' in bootloader?
If you have tried to flash a stock rom from sd card at all, , hspl will have gone EVEN IF THE FLASH DIDNT APPEAR TO HAPPEN, hspl will still have gone.
Your phone, if from o2, will always only ever take o2 stock roms, unless hspl is there. HTC website will only let you download o2 roms with that serial.
The .exe file the rom comes as is really a zip file, , right click and 'unzip here or extract here', or rename the file from .exe to .zip, , the file ruu_signed.nbh is inside there. I can't seem to find a way to change it to a .zip or extract it. It's a basic .exe file.
Artemis probably failed because of your radio and/or spl. tell us what it says in spl, and what rom you want to aim for, and we can take it from there.
Click to expand...
Click to collapse
Yeah no, that happened me before and I was only had 2.08.0000 but I'm sure I have 2.08.HSPL now. As I've said, it's happened before, in which all I did was do a soft reset and that worked. Doesn't seem to work now though.
I'm pretty sure MAGLDR is wiped now anyway, as when I plug a USB in while off it doesn't boot up, but just goes to a red LED. Is this normal yeah?
Just tried flashing the ROM I mentioned... the little progress bar showed... then the phone rebooted. Now it's back to SPL.
I don't there's anything I can do now is there? :/
ok, hang on, do you have a tmous, or a regular hd2 from t mobile?
I have a EU Leo. I don't know where it's from as I bought it second hand. The guy said it was bought on o2 Ireland.
Hey SKellyyy not saying I don't beleive you but just do this to confirm you have a DU HD2. I know for positive I have a T-Mobile HD2 as I bought mine brand new from a T-Mobile store. On your HD2 touch Start/Settings/scroll down to About Phone/Hardware Information. This is what mine says.
CPU
Qualcomm (R) 8250B
Speed
1024 MHz
RAM size
576MB
Flash memory size
1024 MB
Data bus
32 bits
Storage size
686.99 MB
Display resolution
480x800
Colors
65536
Bluetooth version
2.1/2.1+EDR
Bluetooth address
38:xx:xx:xx:xx:xx
Compare yours and let us know.
if the send key is white its regular, green its tmous. yours will be regular, from o2.which is why none of those roms you tried worked. only ONLY o2 roms will work unless hspl is there, anmd as soon as you flash any stock rom using sd card, it will remove hspl and then teh flash will fail, but hspl is already gone.
so, to get..
a winmo rom
bootloader - hspl4 - 2.08.hspl (3.03.hspl if you want a 3.14 rom) - bootloader - radio (if needed to update, see the rom thread) - bootloader - flash rom
to prep for nand android
bootloader - hspl4 - 2.08.hspl - bootloader - radio - bootloader - magldr - magldr usb flasher - flash CWM
bootloader -
Lol dude I'm pretty positive as it only has 512MB ROM and it has no T-mo on top and the buttons are white.
I've already tried to flash HSPL again but that was using the second version of the software (can't remember the name) and it failed. It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Where will I get a stock o2 ROM as the HTC website says "this software isn't available for your device"?
Skellyyy said:
It recognized the phone and let me choose 2.08.HSPL but the progress bar just went and went (for over an hour).
Click to expand...
Click to collapse
thats more likely the comp, not the phone. all usual things, reinstall activesync/wmdc, dont use 64bit os if you can help it, firewalls off, etc etc etc. easiest first test is use a different pc.
It was fine flashing CWM on Friday. Currently can't use a different PC, will get one later and try again.
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
hspl is different than flashing roms / cwm.
flashing and sync will work through any old usb port, rarely need to turn off firewalls, whereas hspl is realllly choosy. gotta be a usb socket directly on the motherboard, hates 64bit win, times out before the phone has rebooted if you start it from winmo running, isnt all that happy if you have changed teh usb drivers for that particular port, say for mtty, or android, (each usb port has its own drivers associated with it, thats why swapping usb ports if it fails is always the first step, try them all)
I've tried three different PC's. Two desktops and one laptop, all plugged in to motherboard USB'a but none of them are installing HSPL. They're all just going up and down on the progress bar. Should I try HSPL4? I'm using the HSPL3 program.
No computers are running 64bit btw.
Is there anywhere I can just get the o2 ROM and try flash it?
Yea go to HTC website, support, pick phone, downloads, change dropdown to rom upgrades, operator name is in the title. You can also find them in the official roms thread in rom development section, and elsewhere in various threads.
Keep gour head up!
Skellyyy said:
Thinking if I get this fixed, I'm selling it. Too much sh*t happens with it. It's maybe just my phone but this usually happens everyday and a few battery pulls/soft resets fixes it. That by itself is annoying, but this is even more annoying.
Click to expand...
Click to collapse
Sorry you are having so much trouble out of your HD2. The HD2 is a great device but they are quirky as hell. I sure you will get it fixed, keep your head up man. Oh and don't give up on the HD2 just yet cause just like King Authur's Excalibure, The HD2 is a thing of legend.
Excilcior
Yeah, I'm currently looking to get a new HD2. Decided.
It's just the bootloader doing my head in, found the official ROM I need, but it'll only flash from PC and it's stuck at 0%. I need it as a .nbh so I can install from SD card. Do you know how I can do that if the RUU I downloaded is a .exe?
If you got RUU in .exe file install WinRar right click on the RUU file and choose "open with WinRar" then extract the .nbh file
Hello everyone,
I have a HTC HD2 with 512mb ram on it. I recently was looking up on how to correct a incall volume issue and was told to download clockwork or something like that. As soon as I installed that, Android would no longer boot on my phone. When I try loading Android Nand, it just fails.
I have tried everything from refreshing the HSPL, re-installed the ROM, and re-installed amagldr.
On startup, I get the error Nand kernal failed to startup.
If anyone can give me some step by step guide to either returning the device completely back to windows or on how to fix this issue.
I am so lost right now its ridiculous and now I feel like putting a m-80 to this phone and ending it all.
There are no hd2s with 512 ram,,, 448 regular, 576 tmous.
When you flashed clockwork you wiped whatever was on the phone,,, hope your contacts are backed up!
Solutions...
Flash new android rom
Or
Get tmous 3.14 rom, into bootloader, flash over USB,then hspl4, choose 3.03.0000
Or
Get tmous 3.14 rom, read and follow instructions for SD card flashing.
Nothing you do will recover anything from before, it's all starting over.
have a gold star for flashing something not knowing what its gonna do.
Im not to worried about the data on the phone. This is a backup phone until I get everything straightened out and what not. I learn from doing and I learned what not to do by putting that crap on the phone
Hopefully your method works.
Just wanted to say thanks, I got it all squared away and I also fixed the in-call sound issue with a few tweaks.
Glad to hear it, , happy endings are always good, and if there's a learning curve too, so much the better!