Overclock, shut off - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hello all,
I was watching a movie on my Tab 10.1 running JellyBeanRomICS v8 with Yoda kernel v2.4 overclocked at 1600MHz. Approximately 20 minutes into the movie my tablet turned off. I think it was due to overheating issue because my tablet felt extremely hot. Thankfully, I was able to turn it back on. My question is, is it safe to continue to watch movies while my tablet is overclocked?
If it matters any the movie I was watch is 960MB 1280x536 .mp4.
Also, the reason why I overclocked is because the movie is choppy/laggy when it is in stock speeds.

I wouldn't overclock to that high if it were me. The most our tab can go is 1.4GHz only. Anything higher will be extremely unstable.
Sent from my GT-P7500 using Tapatalk 4

Ditto eushaun99. Overclocking that high not advisable as the tab has tried to warn you by getting hot!
What video player you using? HW or SW? Maybe try another one or other settings to get round lag/stutter...
sent from my still superb Google I/O 7510

stinky73 said:
Ditto eushaun99. Overclocking that high not advisable as the tab has tried to warn you by getting hot!
What video player you using? HW or SW? Maybe try another one or other settings to get round lag/stutter...
sent from my still superb Google I/O 7510
Click to expand...
Click to collapse
I'm using MXPlayer and I believe it was in SW. I guess I won't overclock higher than 1.4. Thanks for your help guys

johnnyree123 said:
I'm using MXPlayer and I believe it was in SW. I guess I won't overclock higher than 1.4. Thanks for your help guys
Click to expand...
Click to collapse
Try HW+. It works fine for me.
Sent from my GT-P7500 using Tapatalk HD

Related

Video Playback Problem using Void Echo

Hi! Have you ever had problems on video playback using void echo? I have experienced problems after playing for say 1min then the whole video will lag and eventually close down. (Note that this is the recorded video from P500)
Any clues? I have not enabled sf and hwacc.
Thanks
Hi, a friend of mine had the same problem you're describing. The video seems to start well, and then the lag comes in and it shuts down. I think this is mainly due to a slow SD card (maybe class 2?). I've been on void echo for a while, and I have a 8 Gb class 4 microSD card. Played video with absolutely no problem at all. Ecxept, but it's a problem related to all roms I think, videos with ac3 audio. With these, the video plays well, but I can't hear anything.
Me too, I use 8gb sandisk class 4 micro sdhc. I don't have the usual unmount problems,only on-the-job video. And I noticed that the video plays fine when I restored my phone to the stock rom. Any clues on this?
Sent from my LG-P500 using XDA App
Can't think of anything then..sorry mate If something comes up my mind I'll let you know...
EDIT: Btw, I'm on exactly the same SDcard you have. Strange thing, for sure...
tobats120 said:
Me too, I use 8gb sandisk class 4 micro sdhc. I don't have the usual unmount problems,only on-the-job video. And I noticed that the video plays fine when I restored my phone to the stock rom. Any clues on this?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
SAME HERE ..i had a nokia bundled card(class4) earlier with but with sandisk microsd sdhc class 4 8gb i m facing same problems with LOL rom.(.havent checked out on stock rom)
PS... USB transfer is slow too...Earlier i had around 5-6MBps for video files now sandisk one gives only 3-4MBps...Regrettin buying it
The problem is VIDEO is staggering ...Not reboot or anything..Just lower FPS dont know why...Files i play are .avi with xvid 624*352 ~1Mbps and audio mp3 128Kbps 48KHz
Same problem for me on #echo.Any solutions?
Sent from my Lg Optimus One using Tapatalk.
Turn off the interactive governor, that is the source of your problems. Set it back to the on-demand governor and you will have no problems at all.
zero7525 said:
Turn off the interactive governor, that is the source of your problems. Set it back to the on-demand governor and you will have no problems at all.
Click to expand...
Click to collapse
tried that didn't help
zero7525 said:
Turn off the interactive governor, that is the source of your problems. Set it back to the on-demand governor and you will have no problems at all.
Click to expand...
Click to collapse
How do I do that?
Sent from my Lg Optimus One using Tapatalk.
root your phone.. INstall Setcpu for root users 2.1.0 and there u go.. just try ondemand scheduling between 600MHz or 245 MHz or u can save more power using conservative between 245 and 600...I use conservative or the phone gets hot (its INDIA)
sarfaraz1989 said:
root your phone.. INstall Setcpu for root users 2.1.0 and there u go.. just try ondemand scheduling between 600MHz or 245 MHz or u can save more power using conservative between 245 and 600...I use conservative or the phone gets hot (its INDIA)
Click to expand...
Click to collapse
void rom it's already rooted and it has setcpu installed.
Sent from my Lg Optimus One using Tapatalk.
Any other suggestions?
Sent from my Lg Optimus One using Tapatalk.
u know u cud always convert videos to lower specs ..Using "any video converter"
same problem here, i'm on andy572's ginger 2.3.2 alpha 3
Try disabling stagefright
I2asta said:
Try disabling stagefright
Click to expand...
Click to collapse
I didn't created stagefright folder in void/settings,so it's disabled.Something else to try?
rosuvladut said:
I didn't created stagefright folder in void/settings,so it's disabled.Something else to try?
Click to expand...
Click to collapse
Yeah try another ROM . If Void echo fails , try something else . Go for the new Nessy , Light ROm which both have 2.2.2 android but Light ROM doesn't have a2sd . You decide which is best for you .
rosuvladut said:
I didn't created stagefright folder in void/settings,so it's disabled.Something else to try?
Click to expand...
Click to collapse
Yeah, I think to that void is the problem. But why do you need video on a phone? I know smartphones but come on you can play games (I've got void myself) and read mail,mp3 player and bla bla....why the need for video?!
Sent from my LG-P500 using XDA!
IrocG said:
Yeah, I think to that void is the problem. But why do you need video on a phone? I know smartphones but come on you can play games (I've got void myself) and read mail,mp3 player and bla bla....why the need for video?!
Sent from my LG-P500 using XDA!
Click to expand...
Click to collapse
Everyone has his needs,personnaly I need to watch youtube videos on my phone.
Sent from my Lg Optimus One using Tapatalk.

Modern Combat 3 Laggy Singleplayer (SGS2)

Hi guys, the game works fine for a couple of mins, until the phone starts heating and well , it starts lagginggggg. Multiplayer works fine, but single player is just killing me. Problems only occur when phone starts to warm up. Anyone facing this issue?
More info : Strafing and scrolling "view" seems to be lagging, as though frame-rate just dropped or something. I've reinstalled and uninstalled, downloaded data and still, the same outcome. Multiplayer is as smooth as
Please tell me this isnt just meeee
im alone?????
Ive only played the first mission. it does not lag or overheat like you mention,although i do notice the frames drop in some areas becoming slightly laggy.online gaming is great.i hate that the game crashes and restarts sometimes in online play
Have some apps running in the background?
I also experience UHT moment when i play gameloft games.. but theres no continuous lag, only stutters on some area..
You may also need to check that your governor wasn't on conservative..
Sent from The Center of The Earth
Got no framerate issue here. Try looking for a newer version.
florexus said:
Got no framerate issue here. Try looking for a newer version.
Click to expand...
Click to collapse
Gorjess said:
Have some apps running in the background?
I also experience UHT moment when i play gameloft games.. but theres no continuous lag, only stutters on some area..
You may also need to check that your governor wasn't on conservative..
Sent from The Center of The Earth
Click to expand...
Click to collapse
djunited said:
Ive only played the first mission. it does not lag or overheat like you mention,although i do notice the frames drop in some areas becoming slightly laggy.online gaming is great.i hate that the game crashes and restarts sometimes in online play
Click to expand...
Click to collapse
Hmm, im on the latest version. 1.0.1. What im getting is the BLURISH effect when scrolling views. Im pretty sure its a framerate drop. Ive got MC3 running alone, no background apps. Its literally killing me. Ive tried 5 different kernels, and Im sure im not overclocking or underclocking the cpu. Im using stock rom though. Would cyanogenmod help improve the gameplay? Any good roms that still preserve the samsung qwerty keyboard?
I have this issue too. I have a Samsung Galaxy SII GT-I9100, Noble Black, 2.3.5, stock ROM, kernel XWKJ1 (also stock), NO ROOT
At some point (fire or many trees or something) the game is lowering the FPS. I didn't noticed that for example on Sensation XL (which has 1.5 singlecore and even higher screen resolution than my phone has) and i didn't saw a single lag.
I made a video about this problem and posted it on youtube here it is:
I suppose this problem is related to my stock ROM or even my stock kernel... something similar is happening with backstab but there it's not that annoying since it's not a FPS game
Chaoshead3 said:
I have this issue too. I have a Samsung Galaxy SII GT-I9100, Noble Black, 2.3.5, stock ROM, kernel XWKJ1 (also stock), NO ROOT
At some point (fire or many trees or something) the game is lowering the FPS. I didn't noticed that for example on Sensation XL (which has 1.5 singlecore and even higher screen resolution than my phone has) and i didn't saw a single lag.
I made a video about this problem and posted it on youtube here it is:
I suppose this problem is related to my stock ROM or even my stock kernel... something similar is happening with backstab but there it's not that annoying since it's not a FPS game
Click to expand...
Click to collapse
YES YES Im not alone. Thats the problem. I wonder if its due to the stock rom...
Got the game no issue here. im rooted on slimrom with siyah kernel, not overclocked but undervolted so it doesnt heat up so much. Fyi shadow gun is a really good game as well
looks like an iphone but powered by android baby!!!!
No issues here.
Well,it even happens on my device,which is overclocked,both the CPU(1600MHz) and the GPU(400MHz).It seems to only happen when there is smoke on the screen.Doesn't happen in any other case.
Feel like flashing a new rom. Gonna get a usb jig first...
Btw, any roms to recommend?
@androidkid:slimrom running touchwiz?
Chaoshead3 said:
I have this issue too. I have a Samsung Galaxy SII GT-I9100, Noble Black, 2.3.5, stock ROM, kernel XWKJ1 (also stock), NO ROOT
At some point (fire or many trees or something) the game is lowering the FPS. I didn't noticed that for example on Sensation XL (which has 1.5 singlecore and even higher screen resolution than my phone has) and i didn't saw a single lag.
I made a video about this problem and posted it on youtube here it is:
I suppose this problem is related to my stock ROM or even my stock kernel... something similar is happening with backstab but there it's not that annoying since it's not a FPS game
Click to expand...
Click to collapse
Because it has another much weaker GPU, therefore it has much lower graphical quality settings. It's like playing on Low and the GSII on very high.
Phistachio said:
Because it has another much weaker GPU, therefore it has much lower graphical quality settings. It's like playing on Low and the GSII on very high.
Click to expand...
Click to collapse
Well,even if it is so,it's unacceptable,as it's definitely a fault on Gameloft's part.The game is,once again like other Gameloft titles,more or less badly coded.It uses too much GPU.I can play ShadowGun with 16x MSAA(Using CF3D) for hours and the phone just gets warm,while I can't play MC3 for nearly as long and the device burns.Before anyone tries to say that it's because MC3 has so super awesome graphics,it's not the cause.Our GPU doesn't overheat,even when overclocked.Excessive heat is only generated by the CPU.So,try playing ShadowGun and MC3 with 500MHz or 800MHz CPU.ShadowGun still plays as awesome as before,while MC3 lags.
We should contact Gameloft me thinks...
tolis626 said:
Well,it even happens on my device,which is overclocked,both the CPU(1600MHz) and the GPU(400MHz).It seems to only happen when there is smoke on the screen.Doesn't happen in any other case.
Click to expand...
Click to collapse
tolis626 said:
Well,even if it is so,it's unacceptable,as it's definitely a fault on Gameloft's part.The game is,once again like other Gameloft titles,more or less badly coded.It uses too much GPU.I can play ShadowGun with 16x MSAA(Using CF3D) for hours and the phone just gets warm,while I can't play MC3 for nearly as long and the device burns.Before anyone tries to say that it's because MC3 has so super awesome graphics,it's not the cause.Our GPU doesn't overheat,even when overclocked.Excessive heat is only generated by the CPU.So,try playing ShadowGun and MC3 with 500MHz or 800MHz CPU.ShadowGun still plays as awesome as before,while MC3 lags.
We should contact Gameloft me thinks...
Click to expand...
Click to collapse
Contacted gameloft 3 weeks ago. Said they would look into the problem. Lets just wait for the net update to roll out
redfreak said:
Contacted gameloft 3 weeks ago. Said they would look into the problem. Lets just wait for the net update to roll out
Click to expand...
Click to collapse
Yeah...Ok,so what's the next best game you said?
Sent from my GT-I9100 using xda premium
Car drive
Try the map where your using a minigun and escaping with a truck/car (dont remember the map name)
the fps drops from stable 60 to under 20 impossible to, win the level through with hard
Hmm which governor are you using? i just know that lulzactive is kinda bad if it comes to gaming. try out some stock governors like ondemand, conservative or performance.
DaGodfather said:
Hmm which governor are you using? i just know that lulzactive is kinda bad if it comes to gaming. try out some stock governors like ondemand, conservative or performance.
Click to expand...
Click to collapse
Tried all, only choice is to run stock rom, like cm7... Btw guys, if I use chainfire and download the game under "Adreno", would it work
tolis626 said:
Yeah...Ok,so what's the next best game you said?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Now play GTA3.

[Q] Rezound hdmi out performance

Well when I got this phone I saw I could use a bluetooth gamepad with it and I was like oh **** hdmi out +emulator +bluetooth gamepad = me happy haha
Unfortunately that is not the case and I was hoping someone could help. Just on the phone emulators and everything else works flawlessly. When I use hdmi out the performance drops to unplayable.
Emulators (even snesoid...) are way too choppy to even play. Shadowgun and reckless getaway are also choppy but kind of 'playable.' There is noticeable lag so it feels like playing in quicksand.
I get the phone is processing two displays but come on even snesoid is unplayable? So here is my question(s):
Can I force the phone to only display the hdmi output, thereby increasing performance? As I understand it this is not possible but just have to ask.
Can I reduce the resolution of the output and maybe make gains there?
If I root and overclock, could I achieve smooth results? And if yes, what speed would be good to try for stability/performance?
Thanks for your time.
Cmon not one reply? This is xda-dev! This isn't that technical of a question I'm shocked not a single person can help...especially with 80+ views...Any help is appreciated.
Im yet to try out my new mhl adapter on any rom but RezRom 1.2 since i dont seem to find the time to. But will post here when i do. Om gonna try the stock newly leaked ruu.
On Rezrom btw, my phone freezes for a bit then reboots whenver i run a video for some reason.
Sent from my HTC Rezound using Tapatalk
You have to remember that when you mirror displays, your phone is having to draw twice the pixels. So yes, that's going to cause serious lag, especially on a game, even if It's just a SNES emulator.
Overclocking will likely help some, but if there's anyway to turn off your phone display, that would be your best option. I don't have an MHL adapter to help, but hopefully I've at least explained the problem.
Sent from my ADR6425LVW using Tapatalk 2
Indeed, the main culprit is having to push both displays. For some reason, I have not found a way to disable the phone screen without turning off the hdmi out. Basically when you put the phone screen to sleep it seems to cut off the hdmi out...
Because the phone performs so well while only using it's own display, can anyone shed some light on how to have hdmi out going and disable the phone screen? I think this would result in smooth hdmi out performance.
I would think if it was able to mirror, it would be able to simply use one or the other. I really want to figure this out
I would think rooting and some ICS would help, since GB is not really using both cores, correct? Overclocking may help, but may make you phone melt if its pushing super hard.
Well actually I'm running the ICS leak now...605.22 or whatever is the end of the version number. It's pretty and runs smoothly. Was there an aspect of ICS you think would help because as far as games go I see no difference between GB and ICS.
What about rooting do you think would help me?
And also, what speeds would be safe to try overclocking?
For safe clock speeds, use something like SetCPU. Start slowly bumping up the clock speed, using it for a bit, and if it's stable, repeat. If it reboots or becomes unstable, lower the clock speed.
Most importantly, don't set the clock speed on boot until you find a stable speed, or you might end up in a boot loop.
Sent from my ADR6425LVW using Tapatalk 2
Thanks for the overclocking advice. Have you tried OCing the rezound? What kind of speed and performance increase have you seen?
Other than OCing I think my best option would be to find a way to turn off the phone display while running hdmi. If this is just simply not supported, could something be modified and added into a rom that allows hdmi out without the phone display?
You may try contacting TeamWin. I know they really helped the Evo4g with mirroring. Now that we have s-off they may be able to help.
Sent from my ADR6425LVW using Tapatalk
Thanks, I've contacted them just now so we'll see what they say.
Has anyone tried any of the oc kernels?
Can anyone comment on how smooth hdmi out performance is with these overclocks applied? The threads have a lot of comments but none deal with that specifically.
What ROM are you running? Did you get the bluetooth gamepad to work properly? I've read that HTC used a different bluetooth stack that doesnt work with gamepads. What gamepad did you use? Thanks.
I'm using the leaked release candidate of ICS for rezound ending in 605.22 I think. The bluetooth gamepad does work. It's a phonejoy. All it does is press keys on a virutal keyboard through bluezIME because even on ICS although gamepads are 'supported' I have yet to see anything besides N64oid actually use a GAMEPAD, not just 'xperia play' style it and use keyboard inputs.
Anyway bluetooth has multiple protocols and the one the PS3 and some other devices use is apparently not supported by HTC (i have not confirmed this) but phonejoy, and your standard bluetooth earpieces etc use a protocol that is widely supported by phones.
Now how about those oc kernels? Anyone try their hdmi out with them and see if it performs any smoother?
twolasrnames said:
I would think rooting and some ICS would help, since GB is not really using both cores, correct? Overclocking may help, but may make you phone melt if its pushing super hard.
Click to expand...
Click to collapse
Wait... What!!?? Can someone confirm that ics does in fact use both cores? Otherwise... ****, and thank you poster for bringing this to my attention..
Sent from my ADR6425LVW using xda premium
AJMetal87 said:
Wait... What!!?? Can someone confirm that ics does in fact use both cores? Otherwise... ****, and thank you poster for bringing this to my attention..
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
One of ICS main points in its changelog is the improved optimization of all the CPU cores.
Sent from my HTC Rezound using Tapatalk
Abu-7abash said:
One of ICS main points in its changelog is the improved optimization of all the CPU cores.
Sent from my HTC Rezound using Tapatalk
Click to expand...
Click to collapse
So... It uses both cores? Or...
Sent from my ADR6425LVW using xda premium
AJMetal87 said:
So... It uses both cores? Or...
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Yes. The ICS framework itself supports multiple cores. HTC used extra code, including the mpdecision file on GB to regulate when to use the second core, which can be hit or miss. ICS should yield better efficiency and performance when it comes to handling the CPU. (Real world use usually shows the more lightweight GB GUI to be snappier, but the phone is plenty powerful enough to run ICS smooth when all wrinkles are ironed out, and when devs get some more code too, i.e. kernel source.)
Ok, back to my thread question haha....
Has anyone tried HDMI out with any of the OC kernels for the rezound? Does it perform better than stock hdmi out?

CPU locked at 800Mhz during 3d Applications

I have noticed that whenever i play heavy 3d games, my cpu only runs at 800 mhz..even though the scaling is from 200-1200 mhz. First i thought it was a problem with a specific game(The dark knight rises), but now i tried Mass effect infiltrator too..same thing happens..
I wouldnt have bothered too much but i get some fps drops..i expect 'smooth as a butter' experience from S2..which i aint getting..while playing 3d games..
Some one might argue that maybe the game requires only 800 mhz to run..but i seriously doubt it..in 3d applications(heavy) , the processor should be used at higher frequencies. Also, i tried scaling my cpu from 1000-1200 mhz, but still while playing games, the cpu goes back to 800 mhz lol..
Please someone explain this and also Try it on your device..do u notice the same results while playing a heavy 3d game?
I tried running stock kernel as well as siyah 3.3.2. getting same results on both.. tried different governers too..but same thing
I am on neatlite rom currently..could it be the rom thats the culprit?
Please someone do help me, i am getting frustrated with my S2 lol..
thanks
aviral1990 said:
I have noticed that whenever i play heavy 3d games, my cpu only runs at 800 mhz..even though the scaling is from 200-1200 mhz. First i thought it was a problem with a specific game(The dark knight rises), but now i tried Mass effect infiltrator too..same thing happens..
I wouldnt have bothered too much but i get some fps drops..i expect 'smooth as a butter' experience from S2..which i aint getting..while playing 3d games..
Some one might argue that maybe the game requires only 800 mhz to run..but i seriously doubt it..in 3d applications(heavy) , the processor should be used at higher frequencies. Also, i tried scaling my cpu from 1000-1200 mhz, but still while playing games, the cpu goes back to 800 mhz lol..
Please someone explain this and also Try it on your device..do u notice the same results while playing a heavy 3d game?
I tried running stock kernel as well as siyah 3.3.2. getting same results on both.. tried different governers too..but same thing
I am on neatlite rom currently..could it be the rom thats the culprit?
Please someone do help me, i am getting frustrated with my S2 lol..
thanks
Click to expand...
Click to collapse
for ur 'Smooth as Butter' experience with 3d gaming, i would suggest u to flash a stock official ICS firmware and then see for the same
It would be really great if anyone could just verify it on their device too? Just run some good heavy 3d game..and look at the cpu usage..would be a lot appreciated
thanks again
COmeon anyone?? Please reply and let me know how is the game and cpu behaviour in your devices..am really worried coz of this issue...
Why don't you use apps like setcpu and clock your processor at 1200mhz max and say 1000mhz min?
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
UltimateAnas said:
Why don't you use apps like setcpu and clock your processor at 1200mhz max and say 1000mhz min?
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
Click to expand...
Click to collapse
If you noticed my post properly...i did try scaling from 1000-1200..but still the processor goes down to 800 mhz...
It only happens with heavy 3d games( which ironically require the processor the most)
2d games run at 1200 mhz but not the 3d ones lol..:|
Sorry! Try using chainfire's 3D app for the S2, install the drivers and see what happens then?
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
It could be due to smooth scaling setting bug from earlier siyah kernel, or throttling due to cpu temperature.
Try flash the latest siyah kernel and set smooth scaling level to 1200mhz.
i have set smooth scaling to 1200 mhz.. and yeh i guess it could be the throtling issue but why is it happening?
I mean i can run a 2d game like mutant roadkill on 1200mhz but when i try to run heavy 3d games..they just run at 800 mhz..
I did read bout this throttling issue to 800mhz but what can i do to avoid it? The phone doesnt get too hot either though..
Hi I'm running at 1600mhz on my galaxy note (stock is 1400) everything is running damn fast thumbs up.... But every single time I load a game which contains heavy 3d graphics then it goes down to 800mhz I just can't find a solution. Anyway running smoothly at 1600 just as long I don't play games.
Sent from my GT-N7000 using xda premium
dkc1976 said:
Hi I'm running at 1600mhz on my galaxy note (stock is 1400) everything is running damn fast thumbs up.... But every single time I load a game which contains heavy 3d graphics then it goes down to 800mhz I just can't find a solution. Anyway running smoothly at 1600 just as long I don't play games.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
wrong thread and wrong forum my friend this is for s2
also, perhaps you should use setCPU to check some clock settings
I just tried infiltrator, and my device uses highest 1200mhz normally, so i guess it must be kernel/rom related. I'm running rr 2.6.1 with latest dorimanx 5.67 kernel. It might be something about neat rom that prevents your device from using max clock, since neat rom is very battery friendly, but i'm not sure... would be nice if someone using the same rom as you could try and confirm.

Bad performance with Rockstar games?

Hey
Does anyone have performance problems like lagging or frame drops while playing Rockstar Games (GTA 3, Max Payne...)?
I noticed it when I moved to JB on my TF201. Whole system is a lot faster tan ICS but GTA 3 is really lagging. On ICS it was really smooth and I played it a lot. I tried different ROMs, different kernels, wipe device etc. Can someone help me?
Ya gaming on JB took a hit. Too bad since this was supposed to be a powerful gaming tab
Sent from my Transformer Prime TF201 using XDA Premium HD app
zdenko1 said:
Hey
Does anyone have performance problems like lagging or frame drops while playing Rockstar Games (GTA 3, Max Payne...)?
I noticed it when I moved to JB on my TF201. Whole system is a lot faster tan ICS but GTA 3 is really lagging. On ICS it was really smooth and I played it a lot. I tried different ROMs, different kernels, wipe device etc. Can someone help me?
Click to expand...
Click to collapse
No troubles at all playing gta3 on my prime.
What ROM are you using? Could you please post some video of you playing it? I would like to see framerate and things like that. Thanks.
zdenko1 said:
What ROM are you using? Could you please post some video of you playing it? I would like to see framerate and things like that. Thanks.
Click to expand...
Click to collapse
Androwook 1.51 is the way to go!
Solved almost all my gaming problems!! Very smoother
I am using Androwook 1.51 but performance is still not good.
zdenko1 said:
I am using Androwook 1.51 but performance is still not good.
Click to expand...
Click to collapse
It does have some lag here and there if I am not in performance mode.
ahh i just posted similar thread on GTA [Q] Grand Theft Auto III game play lag
i get lag, but have to say graphics are stunning
Well guys, I managed to get it working by NVflashing ICS to my tablet. It is really faster than on JB. Thanks for help.
could you tell me what guide did you follow? also is it a lot of hassle to it?
EA says its a driver problem
Sent from my SAMSUNG-SGH-I727 using xda premium
i finally unlocked prime, installed androwook, great.
but i was still having lag playing GTA3, i then uninstalled Apex Launcher and had no problems after, i been playing the game since yesterday and no major lag, occasional but very little, hardly noticeable.
Its now nothing like it was before and running on max display settings

Categories

Resources