So until maybe a day or two ago, I was fine using MTP on my HTC ONE, but today I went to use it, and apparently the device isn't recognized. I have tried installing HTC Sync Manager, as well as updating the driver using both USB MTP and HTC MTP drivers, and also reinstalling the driver. However when I do anything I get a timeout error. Does anyone know what the problem might be?
Thank You
Related
Hey guys,
i have a little annoying problem with the USB cable for the HD.
since yesterday, it wont respond.
im getting thos messages:
http://img29.imageshack.us/my.php?image=capturenwk.jpg
http://img20.imageshack.us/my.php?image=capture3chj.jpg
i cant Sync between any files and that sucks..
anyone knows how to solve this problem? the USB cable only charging my device and with now sync.
IM USING WINDOWS 7.
can that be any related?
the system updated last night and since then it happened
TNX for the help..!
BTW, i tried RESET the comp, the HD, and nothing changed.
USB Device Not Recognized
was this working before? you say you are using windows 7
is that a new install and now you cant connect to your phone?
you can removing the updated drivers that was installed, this could put things right for you.
try removing activesync and do a fresh install of activesync and if that does not help remove usb drivers and re-install them with out connecting your hd.
almost every time i have had my pdas or phone not being able to connect to activesync it has been software or drive related.
hope this help and you get is sorted
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
espy1988 said:
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
Click to expand...
Click to collapse
I have the same problem on my PC. I would plug in the phone and my mouse would stop working. No tethering app installed or anything.
Anyway, I just tried the ports on the back of the PC and those worked. Try a port closer to the MB
I've tried all my ports. It's still not recognized.
Check the cable and power source. Be sure cable is with good quality. I hade the same issue. I fixed it with original HTC cable and back panel USB from my deskop computer. Front USB of desktop computers often are not enough to power that consumption.
After updating to Froyo it started working again. Thanks though. I still have no clue what caused it.
Bumping to confirm, I found this thread after getting the same error. I had tried several of the USB ports on my computer but after reading this tried the 2 I hadn't yet, they both worked. Not sure why only those work now, but they do work.
Hope this helps someone.
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Vibrant UnBrickable Mod
The same thing is happening to my Vibrant. Tried Rooting and installing various ROMs and it is still "Not Recognized". Tried all ports on all PCs (4) and Laptops (1) and non of them work. espy1988, how did you upgrade to Froyo 2.2 if you could not connect to PC and Kies? This used to work without an issue.
Thanks
Tombias said:
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Click to expand...
Click to collapse
Like said above u might need to be debricked.
seems like ur phone is hard bricked.
---------- Post added at 04:33 AM ---------- Previous post was at 04:26 AM ----------
have u tried Odin back to stock using Odin or hemidal ?
I have the same problem now. I have had my Vibrant for over a year never with an issue. I have Odined it back to JFD dozens of times but now it will not recognize the usb device.
I have GB bootloaders, but never a problem before. When changing Roms I usually Odin back to JFD first and start clean.
My problem started with the phone getting stuck in landscape mode. I was running a 2.3.4 GB rom Sensation. I reflashed a few times but whenever a restored anything from Titanium it would revert back to landscape only. I decided to go back to a 2.2 rom and plugged in the phone to Odin and it was not recognized, also not as a mass storage device, no go. I used Samba to copy a 2.2 rom, Trigger, to the phone and flashed from there. The phone is good now except the computer still won't recognize it. I can use Samba to access the SDCard but I hate not being able to use Odin if things go south. Tried all usb ports and a new cable, no go. Really wierd.
Looking for suggestions......
If you're still under warranty claim it & send it.
Had same problem. There is no fix short of replacing USB port.
I found my problem. It was dirty/corroded usb port. I carefully cleaned it out (took a few times) and it's all functioning again. I also cleaned the contacts on my original usb cord and it is working again also.
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
jnusz said:
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
Click to expand...
Click to collapse
Have you tried installing the installing/re-installing the Samsung drivers (LINK), using another USB cable, or even another computer? I just want to make sure you've tried it all before attempting to do a hardware mod.
Anyhow, you can find a link to the unbrickable mod and other hardware mods in the "Official XDA Vibrant Bible Thread", under the "MODS/SCRIPTS" section (LINK).
Mine is the cable btw. My wife has a GSII and I was able to use her cable.
Ok so im trying to connect the phone USB but it gives me only options like im connecting a camera photo and scan in windows lol? how do u access the phone so that you can transfer files i dont understand, never had a problem connecting a phone this way before.
I had this problem too.
I'm using XP and I had to install a driver for windows called MTP I think it was.
Once I restarted it worked. Make sure it is in MTP mode when plugged in via USB.
Probably worth trying
EDIT: Just realised I think what actually fixed it was installing the Samsung USB Driver for Mobile Phones (I installed 1.4.8.0 which I think was the latest)
Google it and download should do the trick
Thanks that did the trick installing USB drivers, i found them from here if anyone else has the same problem.
http://forum.xda-developers.com/showthread.php?t=961956&page=19
Just connected my s3 to a W7x64 laptop. The device driver software wont install. Samsung mobile MTP device driver installation failed. Any ideas why and how to rectify it? Using original windows and USB cable.
flamingskull said:
Just connected my s3 to a W7x64 laptop. The device driver software wont install. Samsung mobile MTP device driver installation failed. Any ideas why and how to rectify it? Using original windows and USB cable.
Click to expand...
Click to collapse
Anybody?
No help?
Sent from my GT-I9300 using xda app-developers app
same here
I tried the same thing earlier today and had the same result. My plan is to download kies from samsung which should have the drivers in the install package
Yup - installing Kies should fix this as it comes with the correct drivers (I also had this problem previously).
Olywa
install the driver package or kies or use windows update to get the drivers
Yeah..
I ran into same problem today.
Here is what I did to get it work. Uninstall Kies (include USB driver), Re_install Kies, update to the latest version. On the phone, untick USB debugging, reboot it. Plug it to PC, it will detect and installing drivers and voila...you can tick USB debugging if you want :good:
Try removing the sim card and then connecting the phone to the pc, if it works the sim card is bad. I just fixed my mtp issues on my s3 with this method
I have finally got mine installed.
Was a question of which USB port to use. Had to run off the mainboard to install having un-installed the previous attempt.
Once installed It is quite happy connecting to my monitor hub.
Now I need to get Kies installed as at present it won't!
I will note that I am on Windows 7 Premium 64bit and it is a new installation - so there is a lot of Windows Updates going on every reboot. The sensible thing is of course to wait for Windows to stabilise before installing too much stuff.
After a firmware update....I was experiencing the same old MTP failure thing and having issues with Kies. The only way I could fix it was to reset the phone! And it worked....so back up and reset?
had this problem just yesterday, steps I did was enable step 1 -usb debugging, rebooted phone -didn't work
step 2 - reinstall kies driver -didn't work
also make sure to use original usb cable supplied, I found there are issues with after market ones.
lastly found out since I am using a usb hub, I tried to connect the original usb cable into the usb jack direct, did step 1 and 2 , finally it work
question is does mtp required the same usb port to connect everytime?
Had the same issue today. All drivers installed, but the MTP failed.
Thanks for the advice on wiping and rebooting. That seemed to work for me. After that, the MTP driver installed just fine.
Hey I just found that ever time the usb MPT driver failed on laptop I would get a message "MPT disabled by security policy". ok this is not theexact message but something similar since I dont get this message now
All I did was to delete my corporate exchange email...they install some ****ty security policy. So if you guys are connecting to some corporate networks/exchange or downloaded some app that restricts security policy it might be preventing MPT installation. That would explain why resetting would work for some users.
Also the carriers may be pushing some security policy, mine does for internet sharing. so may be remove the sim card and then try installing the drivers.
Just my 2 cents. Also please pardon the spelling and grammar, its late Friday, have been working on this for over 5 hours and had a few beers.
Cheers All.
dkotagi said:
Hey I just found that ever time the usb MPT driver failed on laptop I would get a message "MPT disabled by security policy". ok this is not theexact message but something similar since I dont get this message now
All I did was to delete my corporate exchange email...they install some ****ty security policy. So if you guys are connecting to some corporate networks/exchange or downloaded some app that restricts security policy it might be preventing MPT installation. That would explain why resetting would work for some users.
Also the carriers may be pushing some security policy, mine does for internet sharing. so may be remove the sim card and then try installing the drivers.
Just my 2 cents. Also please pardon the spelling and grammar, its late Friday, have been working on this for over 5 hours and had a few beers.
Cheers All.
Click to expand...
Click to collapse
Thanks a lot Man... worked for me once i removed the exchange account settings.
The phone and cables are good as I can get HTC Sync to work on my old PC and this one worked just a few weeks ago and I can even get it to work in a VMware session. But for whatever reason the phone just keeps showing up as Unknown and is put under Other devices as “Android phone”. On the other PC and in the VMware it is added as "My HTC" under Android USB Devices in Device Manager.
I’ve tried a bunch of uninstalling and rebooting and so on but something on my new Windows 7 PC is stuck when connecting the phone. It thinks it has no driver for it but it does. If I try and point any of the HTC INF files Windows just says they are not for this device.
Help!
Thanks.
Tanquen said:
The phone and cables are good as I can get HTC Sync to work on my old PC and this one worked just a few weeks ago and I can even get it to work in a VMware session. But for whatever reason the phone just keeps showing up as Unknown and is put under Other devices as “Android phone”. On the other PC and in the VMware it is added as "My HTC" under Android USB Devices in Device Manager.
I’ve tried a bunch of uninstalling and rebooting and so on but something on my new Windows 7 PC is stuck when connecting the phone. It thinks it has no driver for it but it does. If I try and point any of the HTC INF files Windows just says they are not for this device.
Help!
Thanks.
Click to expand...
Click to collapse
make sure you have the correct drivers for you phone, if you using the latest version download and install an lder version of the drivers then try to connect
That’s the thing though. The drivers were just fine a few weeks ago. The same drivers work on another PC with this phone and they work now on this same PC in a VMware session. There is something stuck in my Windows host install that no longer allows any new devices to be installed. Like one of the fixes I found on line was to remover your USB hubs and let Windows find and install them again but then they could not be installed and were added to the Other devices. I had no mouse or keyboard. I had to run a system restore under the F8 options on boot up. Unfortunately I don’t have a restore point older than the issue. Even if I unplug my working mouse and put it in a different USB port it too is added to Other devices and no longer functions. I just get messages about it being an unknown device and that no drivers can be found.