Ringing alarm: how to have an endless ringing ?
I re use my HD2, but the ringind alarm is too short , repeat ring only 3 times and after stop. It's much
too short to wake up in the morning !!!!!
- how to have an endless ringing ? (like Android) without install another software,
just using WM 6.5 alarm ?. Tweak ?, edit registry ?,
Thx for your help
Sko
I have WM6.5.5 NRG & works for me, have repeat option if do alarm via clack & alarm from settings CPL
Have a look at registry below:
Below is an example to enable the Alarm Reminder + Vibrate:
HKEY_CURRENT_USER\ControlPanel\Notifications\{15F1 1F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Delete or set the DWORD: AvailableOptions = 0
Create the DWORD: Options
Set the DWORD: Options = 1073741843
Reboot
Below are various Options values:
All Unchecked = 1073741824
Play Sound = 1073741825
Play Sound + Repeat = 1073741841
Play Sound + Repeat + Display Message = 1073741849
Play Sound + Repeat + Display Message + Flash Light = 1073741853
Play Sound + Repeat + Display Message + Flash Light + Vibrate = 1073741855
Play Sound + Repeat + Display Message + Vibrate = 1073741851
Play Sound + Repeat + Flash Light = 1073741845
Play Sound + Repeat + Flash Light + Vibrate = 1073741847
Play Sound + Repeat + Vibrate = 1073741843
Play Sound + Display Message = 1073741833
Play Sound + Display Message + Flash Light = 1073741837
Play Sound + Display Message + Flash Light + Vibrate = 1073741839
Play Sound + Display Message + Vibrate = 1073741835
Play Sound + Flash Light = 1073741829
Play Sound + Flash Light + Vibrate = 1073741831
Play Sound + Vibrate = 1073741827
Display Message = 1073741832
Display Message + Flash Light = 1073741836
Display Message + Vibrate = 1073741834
Display Message + Flash Light + Vibrate = 1073741838
Flash Light = 1073741828
Flash Light + Vibrate = 1073741830
Vibrate = 1073741826
Alarm bugfix
[HKEY_CURRENT_USER\ControlPanel\Notifications]
"MuteSoundOnClose"=dword:0
[HKEY_CURRENT_USER\ControlPanel\Notifications]
"AlertInterrupt"=dword:0
Another option is a customised tone made from original but looped for say 4 minutes & save in WAV format, not as elegant as registry fix !
I mainly use an old version of G-alarm as like its settings & faultless performance & integration into Windows standard alarms.
Mister B said:
I have WM6.5.5 NRG & works for me, have repeat option if do alarm via clack & alarm from settings CPL
Have a look at registry below:
Below is an example to enable the Alarm Reminder + Vibrate:
HKEY_CURRENT_USER\ControlPanel\Notifications\{15F1 1F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Delete or set the DWORD: AvailableOptions = 0
Create the DWORD: Options
Set the DWORD: Options = 1073741843
Reboot
Below are various Options values:
All Unchecked = 1073741824
Play Sound = 1073741825
Play Sound + Repeat = 1073741841
Play Sound + Repeat + Display Message = 1073741849
Play Sound + Repeat + Display Message + Flash Light = 1073741853
Play Sound + Repeat + Display Message + Flash Light + Vibrate = 1073741855
Play Sound + Repeat + Display Message + Vibrate = 1073741851
Play Sound + Repeat + Flash Light = 1073741845
Play Sound + Repeat + Flash Light + Vibrate = 1073741847
Play Sound + Repeat + Vibrate = 1073741843
Play Sound + Display Message = 1073741833
Play Sound + Display Message + Flash Light = 1073741837
Play Sound + Display Message + Flash Light + Vibrate = 1073741839
Play Sound + Display Message + Vibrate = 1073741835
Play Sound + Flash Light = 1073741829
Play Sound + Flash Light + Vibrate = 1073741831
Play Sound + Vibrate = 1073741827
Display Message = 1073741832
Display Message + Flash Light = 1073741836
Display Message + Vibrate = 1073741834
Display Message + Flash Light + Vibrate = 1073741838
Flash Light = 1073741828
Flash Light + Vibrate = 1073741830
Vibrate = 1073741826
Alarm bugfix
[HKEY_CURRENT_USER\ControlPanel\Notifications]
"MuteSoundOnClose"=dword:0
[HKEY_CURRENT_USER\ControlPanel\Notifications]
"AlertInterrupt"=dword:0
Another option is a customised tone made from original but looped for say 4 minutes & save in WAV format, not as elegant as registry fix !
I mainly use an old version of G-alarm as like its settings & faultless performance & integration into Windows standard alarms.
Click to expand...
Click to collapse
Thx for your help Mister B
But I d'nt understand what is " clack & alarm " (software ?) and " CPL " (courant porteur ligne in French : connect 2 box via 110/220V).
To make it simple : I must just modify registry
HKEY_CURRENT_USER\ControlPanel\Notifications\{15F1 1F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Delete or set the DWORD: AvailableOptions = 0
Create the DWORD: Options
Set the DWORD: Options = 1073741841
Reboot
to have Play Sound + Repeat endless (1073741841) ringing alarm ?
Only do this ? , not install any other software ( clack & alarm ) ?
Tell me and after I do this
Thx , Sko
sko95fr said:
Thx for your help Mister B
But I d'nt understand what is " clack & alarm " (software ?) and " CPL " (courant porteur ligne in French : connect 2 box via 110/220V).
To make it simple : I must just modify registry
HKEY_CURRENT_USER\ControlPanel\Notifications\{15F1 1F90-8A5F-454c-89FC-BA9B7AAB0CAD}
Delete or set the DWORD: AvailableOptions = 0
Create the DWORD: Options
Set the DWORD: Options = 1073741841
Reboot
to have Play Sound + Repeat endless (1073741841) ringing alarm ?
Only do this ? , not install any other software ( clack & alarm ) ?
Tell me and after I do this
Thx , Sko
Click to expand...
Click to collapse
Clock & Alarm is the default Windows alarm found in Settings Control Panel (CPL)
When you go to alarm via this route you should see an option for repeat that may or may not resolve your problem.
If it does not resolve problem try adding registry as in your reply & see if you get result you are after. the new settings for alarm notifications will be found in Sounds & notifications Control Panel .
I do it and NOT WORK .....
By defaut , at this location I have :
Default = Rappels
AvailableOptions = 15
Options = 5
Duration = 5
Wave = \Windows\Alert-Solft.wma
I delete AvailableOptions= 15, put Options= 1073741841 , Reboot HTC HD2 , not work : play only 3 time sound
I try Duration= 0 , same , I delete Duration , same ..... play only 3 time sound
I THINK YOUR LOCATION IS BAD :
Defaut= Rappel (Reminber) and Wave = Alert-Solft.wma NOT SNOOZE like clock alarm : SO, THIS LOCATION IS BAD,
this location is for Reminber , NOT CLOCK ALARM !!!!!!!!!!
Only other registry I see linked to alarm is:
HKEY_CURRENT_USER>ControlPanel>Sounds>Clock
On WM6 we could add an extra String Value here to create looping alarm clock.
go to: HKEY_CURRENT_USER>ControlPanel>Sounds>Clock
Right click: New>String Value
Enter Value Name: Script
Enter Value Data (for no vibrate): apr
or
Value Data (with vibrate): av0pr
If you want to add a delay between each ring add 'w(delay)' before the r(repeat), for example: av0pw3r would have a vibrating alarm with a 3 second wait before looping the ringtone
Delete the 'Script' value to revert back to the normal alarm ring.
You can look into this but I don't think it works on later WM6.1 onward builds.
If no good only option is custom longer alarm sound files unless can find some way of customising the repeat count beyond current 3x repeat :-/ I will update post if find anything that seems relevant ...
do this, D'NT WORK ...
HKEY_CURRENT_USER>ControlPanel>Sounds>Clock
String Value
Enter Value Name: Script
Enter Value Data : apr
Always play sound Alarm-Snooze.wma 3 time and stop after ......
The guy at Microsoft that do this Alarm is really an idiot : just ring 3 time !!!!!!!!
Yes not a smart setup & not easy work around on some later wm6.x builds.
making the ring tone custom with extended length could for example make it ring for 15 minutes if ring file has a run time of 5 minutes.
Would be ideal to find a hack for the amount of repeats but I not see one & most people went to other alarm options so work on WM alarm got a bit thin ...
I search Alarm-Snooze.wma in registry (I use it for sound alarm) and find it at this location :
HKLM\Software\Microsoft\Clock\0 and 1 and 2
3 directory for 3 alarm in HD2. But I d'nt find a key for longer.
There is Len_AlarmSnd = 12. Perhaps is Lenght_AlarmSound ?.I try to put 0 but after each power Off,
I have always 12 for this key .... So .....
I think the Len_AlarmSnd & Len_AlarmText relate to character count of displayed name of alarm & sound.
AlarmOneTime key looks more interesting !!!
Mister B said:
I think the Len_AlarmSnd & Len_AlarmText relate to character count of displayed name of alarm & sound.
AlarmOneTime key looks more interesting !!!
Click to expand...
Click to collapse
AlarmOneTime : Binary key value=00 00 00 00 00 .....
Mister B " I have WM6.5.5 NRG & works for me, have repeat option if do alarm via clack & alarm from settings CPL ",
u have really repeat option, never never repeat me and I do all yours tips ..... ???
If anyone still searching for an answer (i sure was) and you have wm65, you can check AutoSnoozeMins at
HKCU\ControlPanel\Notifications\Reminders\AutoSnooze\AutoSnoozeMins
it's default value is 2
which means that reminder will be snoozed after 2 minutes.
And
HKCU\ControlPanel\Notifications\Sounds\Repeat
it's default value is 0
And it means that sound will be repeated.
Related
Hi everybody!
I have an HTC Touch Pro from Bell and for some reason it has stopped notifying me by sound or vibrate that i have recieved an email. Text messages work, alerts of meetings work, everything works except mail.
I also do not get an icon in the top bar telling me there is a new email alert.
I have one account set up, but it is not set up as the "Outlook E-mail" account.
All notification settings are set as on.
I'm stumped. I also checked all the "tweak" apps i have in stalled and none of them have a feature to turn of mail notification.
If you have any ideas I would love to hear from you! PLEASE!!! It's driving me batty!!!
Solved
2 thanks,
one to davidk at ppcmobility forums for posting this
http://www.ppcmobility.com/forums/showthread.php?t=675
and one to whoever posted it here!
Thanks!
Navigate to HKCU\ControlPanel\Notifications\A877D65A
Quoting from XDA now:
The values in these keys will determine what options are available (AvailableOptions) and which options are selected (Options).
The values relate to the following (in the order on the Notifications tab):
1 = Play Sound
16 = Repeat
8 = Display message on screen
4 = Flash light for ...
2 = Vibrate
Add the numbers of the notifications you desire. So if you wanted all of them selected you would put 31 in the Options key. If you only wanted a message and vibrate you would put 10.
Next step.
AvailableOptions determine which boxes are available and which are grayed out. (we will leave out Repeat until later). Options determines which are selected, and yes you can select something in Options that is not selected in AvailableOptions, it will appear as a grayed out check box that is selected.
So if AvailableOptions is set to 10 only the Display message on screen and Vibrate check boxes will be available, the rest will be grayed out. If the Options value is 14, the Play Sound will be grayed out, unselected; the Display message will be available and selected; the Flash light will be grayed out, but selected and 5 min (Duration key = 5); Vibrate will be available and selected.
So set the options you want to select and unselect using the Available Options key and use the Options key to specify which are selected. Changing the selection in the Notifications tab will change the value of the Options key, but will not change the AvailableOpions key.
The only values accepted for either are 1-15, 17, 19, 21, 23, 25, 27, 29, 31
Is is because you can't have Repeat (16) without Play sound (1), that's why there are numbers missing. I tested putting 16 in AvailableOptions and 31 in Options and all boxes were selected, but grayed out.
Does anyone know the reg hack or update to enable repeating alarm on tasks and appointments?
I use agenda one but the alarm only sounds once
I don't really want to install battery pack pro as I don't need all the other features.
Cheers
Kenny
This should work:
Use a registry editor, go to:
HKEY_CURRENT_USER>ControlPanel>Sounds>Clock
Select 'Values'
Then select Menu>New Value>String
Value Name: Script
Value Data (for no vibrate): apr
or
Value Data (with vibrate): av0pr
If you want to add a delay between each ring add 'w(delay)' before the r(repeat), for example:
av0pw3r would have a vibrating alarm with a 3 second wait before looping the ringtone (both wav or midi)
If you want to revert back to the normal alarm ring then simply delete the 'Script' value.
Click to expand...
Click to collapse
Hi Davi - is that reg edit definately for tasks?
I've added the entry but it's had no affect - a task with a reminder alarms once and then never again
Kenny
I Got this to work on the alarm but if I went to change the time it would reset the data value to p
Please tell me what conclusion to drive from my battery stats here....
I have already upgraded the firmware and now my sgs3 which is uprooted show show good stats mot the issue which came with some s3s if reporting. Cells standby more than 10 percent...
But still can this standby battery usage value of sgs3 be normal on 3 g or is my device draining battery
Sent from my GT-I9300 using Tapatalk 2
Did you have calibrate your device?
When not, turn your phone off and charge it when it's off. And then you can use it with better battery performance.
If that isn't helping, you must modify your phone.
Turn the brightness lower, because the screen is very big.
Try to turn off the auto sync
Turn off the gps
Download an app killer.
Search on google for more , or call samsung with your problem.
------------------------------------And please press the "Thanks" button if you found this very helpful.
------------------------------------New on xda, but not new on Android Sorry for my bad English, i'm Dutch
Donate if my post/reply was very helpful.
I'm saving for a new device https://www.paypal.com/cgi-bin/websc...=2T3CLL6G5VRD4
Sent from my LG-P990 using xda app-developers app
Actually I think thats normal depending on your usage of the device
This is my battery status
I usually use wireless not 3g and rarely play games
Reo0o said:
Actually I think thats normal depending on your usage of the device
This is my battery status
I usually use wireless not 3g and rarely play games
Click to expand...
Click to collapse
looks like very high usage to me. :S
i get 48 hours out of my phone between charges. i can get teh settings i use if you so wish to try them?
might be worth a try
leekeene said:
looks like very high usage to me. :S
i get 48 hours out of my phone between charges. i can get teh settings i use if you so wish to try them?
might be worth a try
Click to expand...
Click to collapse
This will be nice my friend
By the way I get about 48 hours too but only if I decrease my wifi usage
Reo0o said:
This will be nice my friend
By the way I get about 48 hours too but only if I decrease my wifi usage
Click to expand...
Click to collapse
sorry for delay
here are my settings
Starting point
Weather Widget on front screen.
- click to open -> Menu -> Setting -> Auto refresh = Every 3 hours
Then go to "Settings" (the lines in read are the Titles seen on the MAIN Settings screen most of which you can go in to and change more settings)
Wifi - Off when not in use
click on the word Wifi to bring up the wifi's available and in the bottom right select ADVANCED. you want to change the "Keep wifi on during sleep" to "Only when Plugged in"
Bluetooth - Off when not in use.
Data Usage
Mobile Data = On
More Settings
Flight Mode - Off Obviously
S Beam = Off
Wifi Direct - Off
Near By device ->
Switched Off
Mobile Networks ->
Use Packet Date = On
Data Roaming = Off
Sound (scroll Down to System)
Keytones = On
touch sound = On
Screen Lock Sound = On
Haptic Feedback = Off
Autp Haptic = Off
Display
Brightness - Open -> set to auto
Screen time out - After 30 Seconds
Smart Stay = On
Auto Rotate = On
Touch Key Light Duration = 1.5 Seconds
Screen Mode = Standard
Auto Adjust Screen Power = On
Display Battery Percentage = On
Wall Papers
Use a normal wall paper not a LIVE one
LED Indicator
Charging = On
Low Power = Off
Missed Event = On
Motion
Motion Activition = On
Direct Call = On
smart Alert = On
Tap to Top = Off
Tilt to Zoon = Off
Pan to Move Icon = Off
Pan to Browse Images = Off
Shake to Update = On
Turn Over to Mute = On
Palm Swipe to Capture = On
Palm Touch to Mute = On
Power saving
CPU power Saving = On
Screen Power saving = On
Background colour = On
Turn off Haptic Feedback = On
Accounts and Sync
General toggle at top - ON
Dropbox - No Sync
Google mail = Sync Then Open the option to display more
Sync Calendar = On
Sync Chrome = On
Sync Contact = On
Sync Gmail = On
Sync Google Phot = Off
Sync Google Play Books = On
Sync Google Play Movies = Off
Sync Google + = On
Sync Instant Upload = Off
Sync Internet = On
Sync Picasa Web Albums = Off
Facebook - Sync
Samsung account - No Sync
Skype - No sync
If you use Drop Box go in to the setting here and turn Upload using = WIFI ONLY
Location Services
Use Wireless Network = On
Use GPS = On
Use Sensor Aiding = Off (wasnt to sure what this was so left it off)
Location and Google Search = On
Security
Screen Lock = Pattern
With Swipe Lock = On
Lock Screen Option ->
Shortcuts = On
Information ticker = Off
Camera Quick Access = On (Might aswell switch this off as i cant work out how to get by the Pattern Recognition for the camera to auto start)
Clock = On
Dual Clock = Off
Weather = On
Ripple Effect = On
Help text = On
Wake up in Samsung unlock = Off
Make Patterns Visable = On
Lock Auto = 5 Seconds
Lock Instantly on power key = On
Vibrate on Screen Tap = Off
Language and Input
Default = Samsung Keyboard
google voice type = Off
Samsung Keyboard = On -> in to Settings
Predictive text = On
continuous input = Off
Keyboard Swipe = On
Handwritting = On
Voice Input = GRAYED OUT
Auto Caps = On
Auto Punctuation = On
Character Preview = On
Key Tap vibration = On
Key Tap sunbd = On
Voice Commands for Apps = Off
Acccessibility
Auto Rotate = On
Speak Passwords = Off
Screen Timeout = 30 Seconds
Lock Ato = 5 Seconds
Talk Back = Off
Install Webscript = Not Alloweed
Negative colours = Off
Developer mode
Made some changes in here to speed up the phone a little and save some battery
Under User Interface
Window Animation Scale = 0.5x
Transition Animation scale = 0.5x
Under Apps
Limit Background Processes = 4
Protected App : LINE & Whatsapp [ON]
Networked App : LINE & Whatsapp [ Mobile Data & WiFi ]
Managed App : LINE & Whatsapp : Show Notification [ON]
Lock Screen Style : Bazaar (Magazine Unlock)
Possibility 1)
Dont close the Apps after using it , and remain it in the background.
Dun clear those apps (in this case Whatsapp & LINE) from background. When you use the "square button" , leave those apps on.
Possibility 2)
*I realized that this only happens when in Vibrate Mode & Silent mode"
*Normal mode - Msg sent in , lock screen pop up with notification*
*Vibrate mode - Msg sent in , nothing pop up in lock screen , go into the apps , then the msg starts coming in*
*Silent mode - Msg sent in , nothing pop up in lock screen , go into the apps , then the msg starts coming in*
Anyone is having the same issue ?
Please help I am a new member here, I need the code blocks for
Hello guys I am a newbie here and also in android programming, I am using Sketchware app to build my first app,
This is my project. it's only a try to make my own app (even similar app is available).
My app is to perform functions like:
1) show the current battery percentage (Save the current battery percentage value in a number variable p
(range 1-100))
2) Read minimum value and maximum value in edittext1 & edittext2 respectively
(Don't know how to convert it into a number variable)
Read a minimum value (as a number) (range1-35)
Set two buttons
1 ) to set alarm
2) to stop alarm
Remainder need to be work as follows as possible:
When the user opens the app
1)The current battery percentage is showned (variable p)
2) the user sets two values as min and Max (say 20 as min
& 80 as max)
3 ) user set the alarm by clicking the 'set alarm button'
(Toast messege:" alarm set successfully")
NB:-AND CLOSE The app and CLEAR the app from RECENT APPS LIST
ACTION:
When the percentage p
Is getting down and reaches 20 : the app should popup & the phone should make a sound with a message ( "please charge the phone" ).
Then we plugged it in charging
After some time the percentage p
Is reaches 80 : the app should popup & the phone should make a sound with a message ( "please STOP charging the phone" ).
When both this happens user can disable the notification remainder by the second button to stop alarm.
This is a request please don't kill me with huge jargons
My app's name is. Battery remainder