Can anyone here with the same phone create a recovery or guide me to fix this phone please? I used sp flash tool to root my phone. But something went wrong.And m sorry admin my intention is not to spam here m just freaked out and posted the same in another section/topic. I hope m posting on the right place this time. Please anybody with the solution help me out fix my phone.
Factory Reset of Lava Iris 402 / 356 through android system recovery 3e
immanrens said:
Can anyone here with the same phone create a recovery or guide me to fix this phone please? I used sp flash tool to root my phone. But something went wrong.And m sorry admin my intention is not to spam here m just freaked out and posted the same in another section/topic. I hope m posting on the right place this time. Please anybody with the solution help me out fix my phone.
Click to expand...
Click to collapse
Try this. After switching of Lava Iris 356 / 402, press power button and volume up simultaneously for say 5 seconds. It will boot to android recovery 3e.
Volume up button is for selection and volume down is for moving down.
By pressing volume down go to factory reset then select it with volume up. In the next page select yes. Then go to previous page and select reboot.
Hope your phone works now.
Can`t switch o LAVA Iris 356
:crying:
I had rooted my LAVA Iris 356 with framaroot 1.5.3 ad had installed some apps that ca be used only after rooting ad then my device switched off and when I turned it on it displayed LAVA logo and then the iris logo and it does not go ahead after that. Can anyone help me in this situation ?
If anyone has an idea about it then please e-mail me at [email protected] or please reply on this page. I don`t want to lose my phone which I had bought with my pocket money. If you have any answer then please reply.........!!
---------- Post added at 02:45 PM ---------- Previous post was at 02:39 PM ----------
Can you please try for me also. Please
I rooted my phone and installed some apps then suddenly, it turned off and now I couldn`t switch it on.
Details on how to flash lava iris 402 / 356 stock ROM available at " Guide lava iris 402 / 356 increase ram and internal memory " post. Search for the same in xda. Once software downloaded phone can be revived in 20 minutes. If you have any further doubts ask.
Sent from my IRIS402
Lava iris 402 is displaying only lava logo
Hello i am new to this pls help me how to solve this problem... My lava iris402 s displaying oly lava logo n offing again lava logo displays. I was rooted my phone actually and it was displaying mount not found later some apps i installed it was asking to reboot so i started reboot den this problem was started after this i wiped factory reset n wiped cache partition also den rebooted but problem not solved. Pls pls pls help me anyone... Thanks
Shankarak said:
Hello i am new to this pls help me how to solve this problem... My lava iris402 s displaying oly lava logo n offing again lava logo displays. I was rooted my phone actually and it was displaying mount not found later some apps i installed it was asking to reboot so i started reboot den this problem was started after this i wiped factory reset n wiped cache partition also den rebooted but problem not solved. Pls pls pls help me anyone... Thanks
Click to expand...
Click to collapse
The persons who have uploaded lava 402 original ROM seem to have deleted it. You remove the SD card and restart the phone it might work. If this not works visit nearest lava service centre they will reinstall software within minutes (They might charge if you say you rooted the phone).
Related
hi there! please help me to unbrick my alcatel 918n.. it is already rooted , i've use link2sd and accidentally move the apps.lib// to sd card. the phone hanged and when i try to reboot it android icon and an exclamation point only appearing. try to reset to factory mode and wipe all user data then reboot the phone, still nothing happens. is there any way i can unbrick it? please help me...thanks in advance!
do you have a backup of the system image? there could be a way to restore your phone using the smart phone flash tool.
pyro25 said:
hi there! please help me to unbrick my alcatel 918n.. it is already rooted , i've use link2sd and accidentally move the apps.lib// to sd card. the phone hanged and when i try to reboot it android icon and an exclamation point only appearing. try to reset to factory mode and wipe all user data then reboot the phone, still nothing happens. is there any way i can unbrick it? please help me...thanks in advance!
Click to expand...
Click to collapse
Theres still a chance on how you can unbricked it. Try to follow my instructions here http://forum.xda-developers.com/showthread.php?t=1612233. And if it does boot next thing you must do is to instal a recovery so that your phone can be easily flashed again when something happend.
Sent from my HTC Glacier using xda premium
Restore Factory Defaul
Hello Sir if dont have backup in your recovery ROM., just go to this website, and install the software "One touch alcatel upgrade" just follow the procedure..
how to install source code in alcatel 918n
hello sir,
i have alcatel 918n cell phone.
i just format nand flash. my phone is still not wotking.
i'm downloading source code for alcatel918n but i don't know how to instal it in my cellphone...
please help me...how can i use this source code..
or have another way to flash my phone.
olease help me
Hi,
I am newbie to this forum and also this is my first smartphone...but if given instructions i can definately follow....I have got this new micromax ninja 4 which is great phone but due to ram constraints on the phone i rooted it yesterday and to clear the phone i removed couple of micromax applications after that phone doesnt recognise the sim card and keep getting message like dialer storage stopped responding core.android stopped respnding.....things i have tried to fix....
done factory reset from recovery console..wiped cache as well nogo...removed root uninstaller as well still the same...please help in installing factory image of the phone so i wud root it again and wud delete cautiously...any suggestion or help wud be appreciated...
Regards
Sandeep
phone struck at boot logo...need help
wsminsandeeppa said:
Hi,
I am newbie to this forum and also this is my first smartphone...but if given instructions i can definately follow....I have got this new micromax ninja 4 which is great phone but due to ram constraints on the phone i rooted it yesterday and to clear the phone i removed couple of micromax applications after that phone doesnt recognise the sim card and keep getting message like dialer storage stopped responding core.android stopped respnding.....things i have tried to fix....
done factory reset from recovery console..wiped cache as well nogo...removed root uninstaller as well still the same...please help in installing factory image of the phone so i wud root it again and wud delete cautiously...any suggestion or help wud be appreciated...
Regards
Sandeep
Click to expand...
Click to collapse
hi sandeep,
i am also new here,learnt that you usedrecovery console in this handset....can you please explain me how to take the phone to recovery console....my phone is struck at boot logo...so need to take it to recory console....i would be at a great relief if i can take the phone to recory console....awaitng yours reply....
thanks in advance
Hi sure just shut down the phone n then press the volume up key n power on button together til u see first screen n it will go to recovery console
How to flash stock A87 ROM
Only in case you bricked your phone
Incase if you bricked your phone or made some serious changes and cant revert back or some kind of malfunction happened and you’re worried, no need to worry from now on. We have stock a87 rom which is the original os shipped with Micromax devices.
Just download this file and copy it to sdcard
Then turn off ur phone.
Now press up volume + power button until u see micromax logo.
Then u will enter the recovery mode ,there by using the volume rocker select the apply update.
From the sdcard and press power button ,now select yes and press power button again.
After sometime you will see successful message.
Now select reboot.
Thats all your phone is back to stock rom shipped from micromax.
Download stock a87
Just Copy Paste This link (Sorry I Cant Paste the Link Hear Because I am also new to this form so download attatchment)
Dear All,
I have started this thread:
Link
Kindly contribute, share and explain.
We can help and built a community like I have done for Karbonn & Spice mobiles.
Without help from all members its not possible.
Thanks for reading.
amigo83 said:
hi sandeep,
i am also new here,learnt that you usedrecovery console in this handset....can you please explain me how to take the phone to recovery console....my phone is struck at boot logo...so need to take it to recory console....i would be at a great relief if i can take the phone to recory console....awaitng yours reply....
thanks in advance
Click to expand...
Click to collapse
whats the phone's chipset?
Hello thanks for dropping by on my thread.
Please do help me to unbrick my tablet it's Kata T2 (Fish Tablet).
I've been reading through google for 5hours unfortunately didn't had any best results.
So maybe someone here or if there are any alternative steps to unbrick my tablet that you would recommend. Please do give advice or suggestion.
The problem is I have a "lying android with red triangle logo".
Tried to wipe data & wipe cache and everytime I do a reboot the fish logo appear (default logo) and proceed again to the lying android logo. Could you help me what to do?
If you're asking for a "backup" thing. the answer is NO.I don't have those.. And you might ask for the stock ROM too .. the answer is NO..
So please help me with this.. Thanks!..
same here
i also have a problem with kata t2. i rooted it with vroot then after it rebooted. the logo comes out but after that the screen goes to black. i know its turned on because i can see the light in the lcd but the problem is it wont reboot normally. i have tried to go to recovery mode data erased it to factory setting even deleted the cache but the problem still remains it wont boot normally and stays in black screen. if somebody would help us it will greatly appreciated. :good:
PS: i ask them if they can provide a stock firmware and the answer is they cant. any tips on how can i get it to boot back to normal? the stock firmware by the way is 4.1.1 jellybean... Happy new year
just return go to the nearest service center... i have also bricked mine and said to the technician some lies (virus) . trust me they dont know that you bricked it becauese of rooting it... maybe they just dont care..
Join the Kata T2 group in facebook.. they might help you there..
hey i found a new way to unbrick your kata t2. havnt tried it yet but try it!
1. turn off your kata t2
2. press power button and volume down until kata logo (fish) comes out
3. press again power button and volume down you will see the android logo with exclamation point
4. press power button and volume UP and you will go to recovery.... there you would find recover system from back up. click on it.
Just a suggestion ^_^
hi this is the only place where i could find some help so i want to ask ....i rooted my phone .....i did clockworkmod recovery ......i wanted to install android kitkat by cyanokat ...and ...i followed every steps correctly while flashing new rom ... but at last.... while the process was going to end ....i without of knowledge took of the battery ......then then i pressed the power key the bootloader is blank and with vol- and power keys i could access only fastboot screen..... i am so worrying about it ...and need a way i could reset it to stock rom ....... .....guys i dont know what to do next i googled many things to reset but none helped ..... you are my last hope guys ....pls help...any little help is my pleasure
sachin mensi said:
hi this is the only place where i could find some help so i want to ask ....i rooted my phone .....i did clockworkmod recovery ......i wanted to install android kitkat by cyanokat ...and ...i followed every steps correctly while flashing new rom ... but at last.... while the process was going to end ....i without of knowledge took of the battery ......then then i pressed the power key the bootloader is blank and with vol- and power keys i could access only fastboot screen..... i am so worrying about it ...and need a way i could reset it to stock rom ....... .....guys i dont know what to do next i googled many things to reset but none helped ..... you are my last hope guys ....pls help...any little help is my pleasure
Click to expand...
Click to collapse
do you have the stock backup? if you do then you could flash the files via fastboot. else, just use SP flash tool
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
I had the same problem , and I fixed it.
When you install the TWRP for some reason the data partition get corrupted to resolve this you need to do the following :
---- before you do any thing capture the following information and keep it ----
IMEI , Barcode, Modem Version, Bluetooth MAC , WIFI MAC address
IMEI, barcode and Modem Version details can be found in the factory mode:
- switch your phone off
- Press power button and volume down -- you will boot into factory mode
- from the menu select version ( scroll using volume down button ) click power button
you should see BB chip details, MS Board, etc
note down the following into a paper or to your computer and keep it ( in my case it was useful when I changed the rom)
1- IMEI numbers
2- Modem Version ( Baseband version)
3- barcode number ( I found this info only in this menu)
for the (Bluetooth and WIFI) MAC address you need to boot into your phone and go to settings , scroll down to About phone ( in my case I need to click to More) , then click on Status
you will found ( also you can found the IMEI information it should match what you capture above)
1- Bluetooth MAC address
2- WIFI MAC address
now you have everything you need to format your mobile in case that was needed.
---- Note the following steps will wipe your contacts and reset the phone settings, data on your SD card should not be effected -------------
To root your mobile do the following:
1- install TWRP using SP_Flash
2- copy SuperSU to your SD card
3- reboot to recovery (into TWRP)
if you install SuperSU, now you should notice that it didn't complete and there are some errors for that you need to fix the data partition before install SuperSU
4- click wipe, click Advanced Wipe
5 - select Data and Click on "Repair or Change File System"
if its corrupted the size should be 0 to fix it continue step 6
6- Click change File system and change it to EXT4
7- Wipe to Change it should format the partition for you
when complete check the size of the partition is not 0
if its still 0 " Click Repair File System" in menu of step 5
now you are ready to install SuperSU
Lava iris r1s
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Rooting or TWRP for LAVA R1s
Please help me to root Lava R1s model .. tried with kingoroot and other once click root apps all failed .. kindly give working link for TWRP recovery for LAVA R1s , not able to find in the internet.
Lava r1 s, add stock rom
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Renojjv said:
Hi,
I couldn't figure out where to ask this query since I couldn't find anything regarding my phone. I own a Lava_R1s with StarOS V3.3 with Android Version 6.0. This is a phone available specifically in the U.A.E market since its made without camera and GPS so that it can be used in the oil field.
I tried to root the phone and now its soft bricked. I can enter fastboot mode and recovery mode (TWRP) but every time i try to switch on the phone it keeps going into a loop of the "Lava Powered by android" and switches off and then continues to keep doing that.
Here is what i did.
1. I used fastboot to unlock the OEM.
2. Then I flashed TWRP as recovery for the mobile.
3. After that i installed SuperSU zip file.
After all these steps my phone refuses to start up. It just comes to the LAVA powered by android screen and stays on that screen till i press the power button.
Further more I tried flashing the boot and system with Stock ROM files downloaded from needrom.com. That hasn't helped. In fact the looping of the initial screen started after flashing boot and system files (I used img files for Lava R1 Lite since those where the only ones i could find).
Would be really grateful if anyone could provide me a solution for this issue.
Another thing is that a lot of my colleagues have the same phone, so if there is anyway to extract the rom from their phone and install on mine without actually rooting their device it would also work for me i guess.
Renojjv
Click to expand...
Click to collapse
Custom rom required for lava r1s non camera
vsingh1611 said:
Hi bro I also have lava r1 s without camera,
I want to reinstall stock rom as I am tried of add on this phone,
Can you plz provide a link for stock rom and resolution to these adds
Vijay
Click to expand...
Click to collapse
HELLO TEAM,
PLEASE SEND ME THE CUSTOM ROM FOR LAVA R1s+ NON CAMERA ANDROID PHONE. AND ALSO PLEASE TELL ME THE STEPS HOW TO FLASH THE CUSTOM ROM. FROM THE ABOVE I JUST SEE THE STEPS TO INSTALL THE ROM,BUT NO ONE HAS SEND THE PROPER CUSTOM ROM LINK FOR LAVA R1s NON CAMERA PHONE. KINDLY REPLY FOR THE SAME.
software update error lava r1s
Renojjv said:
SO i flashed my phone using SP_Flash_Tool with Stock ROM for Lava R1 and its working now. but i still cant root the phone. If anyone can figure out that, please let me know.
Click to expand...
Click to collapse
Please tell me how to troubleshoot my software update error in my LAVA R1s non camera Android phone. The software update notification keeps on popping up. And when I click on the notification update then I get the following error saying " Not enough memory. Update needs atleast (109.82mb)". I even have hard resetted the phone but I still get the same update error later on once it gets completely resetted. As soon as it gets connected to internet data connectivity I get the pop ups for software update. How do I get rid of the same.
root lava r1
Hello...
U can try magisk manager method.
It is worked in my lava r1 2gb ram device.
Take patched boot file from magisk manager and flash it via sp flash tool.
coolmanrakesh said:
I like to install leneage or unicorn os on lava iris r 1s. Can anybody help me ... I cant find any files for rooting and installing twrp.. please help
Click to expand...
Click to collapse
I have build ressurection remix nougat. You can try it.
https://forum.xda-developers.com/android/development/lava-r1s-camera-gps-ressurection-remix-t4145507