[Q] Installing Sensai 3.5.0 - HTC EVO 3D

I Am Trying To Install Sensai Rom On My (Unlocked"htcdev.com" with Revolutionary CWM installed , HBOOT 1.53.0007 , 4.0.3 ICS , Not-Rooted , S-On , GSM Evo 3D) And I Follow Instructions .. I Did Choose Full Wipe In Aroma Then After installing done , I Reboot The Phone And Its Stucked On "HTC ,Quietly Brilliant" Logo With A Black Background (Maybe Its Call Bootloop ?!) ... What Should I Do Plz Help

Extract the boot.img from your custom ROM.zip and put it your platform-tools folder on your PC. Switch on your phone in bootloader->fastboot mode. Open command prompt and type: fastboot flash boot boot.img and see. Or reinstall the rom after flashing the boot.img.
Sent from my P5100 Samsung Galaxy Note 8

Thx
dr.faramroze said:
Extract the boot.img from your custom ROM.zip and put it your platform-tools folder on your PC. Switch on your phone in bootloader->fastboot mode. Open command prompt and type: fastboot flash boot boot.img and see. Or reinstall the rom after flashing the boot.img.
Sent from my P5100 Samsung Galaxy Note 8
Click to expand...
Click to collapse
Thank You Very Much ... It Worked Fine
:good:

Related

plz help

after install rom ,the device is rebooting always like that
hboot-1.94.0012 s-on gsm
RUU_Shooter_U_HTC_ARA_1.24.415.6_Radio_10.59.9020.00_10.15.9020.06_M_release_220917_signed
We need a lot more info. What hboot? What rom? Cdma or gsm evo? What recovery? Did you do a full wipe?
We're comin from a pure power source.
From and educated guess I would say you are S-On and failed to flash the kernel via "fastboot flash boot boot.img" in fastboot mode.
as-mol said:
after install rom ,the device is rebooting always like that
Click to expand...
Click to collapse
I guess you are htc unlocked and havent flashed the kernel seperately via fastboot.........or you havent wiped the previous rom.
bootloop
and also need to know what custom recovery you installed sounds like you lost your Boot.IMG if so you will need to exract it from the zip folder of the rom that you have install and then go to that folder and scrool down until you come to the Boot.IMG and copy and past it in same floder that you used to install your su file using command promts and typ fastboot flash boot boot.img

how do I flash gsmfix.zip in my rezound?

from
http://forum.xda-developers.com/showthread.php?p=26199933
I already dl the gsmfix.zip file but I don't know how to flash it.
thx
gabox99 said:
from
http://forum.xda-developers.com/showthread.php?p=26199933
I already dl the gsmfix.zip file but I don't know how to flash it.
thx
Click to expand...
Click to collapse
Flash in recovery. You need Amon Ra installed or any other recovery like TWRP or CWM. Boot into recovery and choose zip from SD.
zac41189 said:
Flash in recovery. You need Amon Ra installed or any other recovery like TWRP or CWM. Boot into recovery and choose zip from SD.
Click to expand...
Click to collapse
thx
now the phone gets stuck in the
white screen
with the words
htc one
p.d.
my ROM is BAMF-33112-RELEASE-KEYS.zip
don't flash gsmfix.zip there. that is only for sense 4 ROM developed by Joel.
On the same page of download link you can find stockgsmfix.zip, try to flash that as bamf-33112-release-keys.zip is based on sense 3.6. hope this helps you!
kancherlapraneeth said:
don't flash gsmfix.zip there. that is only for sense 4 ROM developed by Joel.
On the same page of download link you can find stockgsmfix.zip, try to flash that as bamf-33112-release-keys.zip is based on sense 3.6. hope this helps you!
Click to expand...
Click to collapse
I flash stockgsmfix.zip and the phone still gets stuck in the white screen
with the words htc one
It should work. anyway you are running BAMF sense 3.6 ROM right?
IF that is the case , do clean wipe, flash ROM again, change below values in /system/build.prop file using any editor and reboot once( better do factory reset )
ro.config.lte=false
ro.telephony.default_network=3
kancherlapraneeth said:
It should work. anyway you are running BAMF sense 3.6 ROM right?
IF that is the case , do clean wipe, flash ROM again, change below values in /system/build.prop file using any editor and reboot once( better do factory reset )
ro.config.lte=false
ro.telephony.default_network=3
Click to expand...
Click to collapse
ro.config.lte=false
ro.telephony.default_network=3
I made those changes inside the BAMF-33112-RELEASE-KEYS.zip file and save it
I did the steps and the same, gets stuck after reboot
in the white htc screen.
were you able to boot atleast once? if you are s-on you need extract boot.img (kernel) and need to flash it via fastboot usb ( fastboot flash boot boot.img)
below are steps
- extract boot.img from your downloaded zip file
- place it in android-sdk/platform tools folder- you will have fastboot executable there ( need to have android sdk and HTC driver installed on your pc)
- open command prompt ( right click on cmd -> run ad admin) and navigate to platform-tools folder
- reboot your phone to booltloader and select fastboot
- run command "fastboot flash boot boot.img"
- reboot the phone
If a flashable boot,img is provided in BAMF thread you can just flash it via bootloader
kancherlapraneeth said:
were you able to boot atleast once? if you are s-on you need extract boot.img (kernel) and need to flash it via fastboot usb ( fastboot flash boot boot.img)
below are steps
- extract boot.img from your downloaded zip file
- place it in android-sdk/platform tools folder- you will have fastboot executable there ( need to have android sdk and HTC driver installed on your pc)
- open command prompt ( right click on cmd -> run ad admin) and navigate to platform-tools folder
- reboot your phone to booltloader and select fastboot
- run command "fastboot flash boot boot.img"
- reboot the phone
If a flashable boot,img is provided in BAMF thread you can just flash it via bootloader
Click to expand...
Click to collapse
I extract boot.img from PH98IMGnewfirmwarepeople.zip
I did it and the same, it gets stuck in white HTC screen.
Extract boot.img from your downloaded rom zip file and flash
Sent from my PI86100 using Board Express
gabox99 said:
I extract boot.img from PH98IMGnewfirmwarepeople.zip
I did it and the same, it gets stuck in white HTC screen.
Click to expand...
Click to collapse
the issue is with the STOCKGSMFIX.zip, it seems doesn't work with
BAMF-33112-RELEASE-KEYS ROM
dont flash that. just change the build.prop values and flash ROM and boot.img. that should be good enough!
kancherlapraneeth said:
dont flash that. just change the build.prop values and flash ROM and boot.img. that should be good enough!
Click to expand...
Click to collapse
Finally!
It works!
I can send SMS!
thank you!

Install custom rom (s-on)

i am noob here, so i need a little help.
after reading many guides and watching videos, i rooted my htc evo 3d gsm using htcdev method.
flashed clockworldmod recovery v 5.0.2.0
installed supersu v1.30
now my phone is unlocked with s-on
i did a nandroid backup
tried to install a custom rom by wipping all 3 datas
installed this rom
http://forum.xda-developers.com/showthread.php?t=2161968
but nothing happened.
i m still running the stock rom.
I found these instructions but couldnt understand them
Code:
- Extract boot.img from zip and put into your folden when you have fastboot.
- Put rom into sd
- Full wipe from recovery
- Flash rom
- Flash boot.img with an erase cache before and after boot flash
can anyone help me plz
thanx in advance
The easiest method available is to flash 4EXT recovery and turn on smartflash in options. this way you wont need to flash boot.img every time you install a rom.
If you still want to know what that guy was trying to say then read on.
during unlocking you must have used adb.exe and fastboot.exe files. you need to extract boot.img file from your ROM zip and put it in the folder where adb and fastboot files are located.
after that open cmd and navigate to that folder. then connect your phone in fastboot mode (turn off phone and hold power+vol down to boot into bootloader and select fastboot from menu)
the phone should now show "FASTBOOT USB". now enter this command in cmd without the inverted commas: "fastboot flash boot boot.img"
it should something like sending and write OK in cmd
then reboot phone.
P.S. that rom is very similar to stock rom with little visual differences. check in settings>about phone>software number.. if it shows skydragon3D then your rom flashed correctly
thank you so much man

[Q] Help installing a new rom

Hi,
I'm currently using a EVO 3D with android 4.0.3
I wanted to install a new rom, but everything i tried didn't work.
My phone is unlocked, s-on with HBOOT-1.53.0007, and i can't get into recovery
Even tried to flash a new recovery (CWM and 4ext) with fastboot, but it doesn't work
Can someone please help me
Speedy82 said:
Hi,
I'm currently using a EVO 3D with android 4.0.3
I wanted to install a new rom, but everything i tried didn't work.
My phone is unlocked, s-on with HBOOT-1.53.0007, and i can't get into recovery
Even tried to flash a new recovery (CWM and 4ext) with fastboot, but it doesn't work
Can someone please help me
Click to expand...
Click to collapse
Go Here : http://androidforums.com/3892643-post2.html
I am Also using evo 3d with android 4.0.3 , unlocked , S-On , HBOOT : 1.53.0007
I Successfully flashed recovery but i cant install Custom Roms !!! I Dont know why.
Extract the boot.img from your new custom ROM.zip and put it in your adb platform tools folder, Switch on the phone in fastboot, type the command "fastboot flash boot boot.img" and install the new rom. Again goto fastboot and flash the boot.img again.
Sent from my P5100 Samsung Galaxy Note 8
dr.faramroze said:
Extract the boot.img from your new custom ROM.zip and put it in your adb platform tools folder, Switch on the phone in fastboot, type the command "fastboot flash boot boot.img" and install the new rom. Again goto fastboot and flash the boot.img again.
Sent from my P5100 Samsung Galaxy Note 8
Click to expand...
Click to collapse
Can i flash the kernel (boot.img) without S-off or root ? I Only Unlocked it and flashed CWM ... If I flashed boot.img My Device won't be bricked ?
Dear, it is for those who are on S-ON, you don't need to extract boot and flash it in fastboot if you were S-OFF. Use latest 4ext recovery.
Sent from my P5100 Samsung Galaxy Note 8
How can I install the new rom when I can't get into recovery. my phone just keeps rebooting or gives a black screen
Even when i try to flash a new recovery like 4ext or CWM I can't get the phone to boot to recovery

[Help Me Pls] How to Back to Stock WITHOUT RUU / NANDROID

My International HOX+ (ENRC2B)
Bootloader unlocked
CWM Recovery installed
Stocked, Rooted
CID HTC_058
Got notified of 4.2.2 Sense 5 Official update.
So I flashed that download update zip file in Download folder via CWM, my bad.
I can't find any matched RUU nor I have any Nandroid backup.
How can I revert my phone back to stock?...
Will that update zip file contain stock boot and recovert .img files?
If so, how can I draw this file via ADB?
Pls help me.
Sent from my C6602 using Tapatalk 4
RE
zeyarwynntun said:
My International HOX+ (ENRC2B)
Bootloader unlocked
CWM Recovery installed
Stocked, Rooted
CID HTC_058
Got notified of 4.2.2 Sense 5 Official update.
So I flashed that download update zip file in Download folder via CWM, my bad.
I can't find any matched RUU nor I have any Nandroid backup.
How can I revert my phone back to stock?...
Will that update zip file contain stock boot and recovert .img files?
If so, how can I draw this file via ADB?
Pls help me.
Sent from my C6602 using Tapatalk 4
Click to expand...
Click to collapse
Hello, what exactly is the problem you are facing? what is the status of the device? Are you stuck in a bootloop? Can you enter bootloader and fastboot?
For that update you have to install Stock Recovery ...
JoHnGr0n3 said:
Hello, what exactly is the problem you are facing? what is the status of the device? Are you stuck in a bootloop? Can you enter bootloader and fastboot?
Click to expand...
Click to collapse
Stuck and Bootloop :[
Notechis said:
For that update you have to install Stock Recovery ...
Click to expand...
Click to collapse
Forgive me.
Pls tell me, Stock Recovery needs to be specific for CID / Firmware version / Region / HBoot ?
zeyarwynntun said:
Forgive me.
Pls tell me, Stock Recovery needs to be specific for CID / Firmware version / Region / HBoot ?
Click to expand...
Click to collapse
If you can access your phone via fastboot then you can revive it pretty quick.
If you cannot, then...... no need to say it
here are the steps to follow if you can use fastboot:
first of all you should prepare your files; you need the drivers for the device, adb and fastboot executable files, a ROM of your choice with the proper boot.img. Once you got those put them in one folder and proceed.
enter bootloader mode (volume down + power)
select fastboot mode
plug your usb cable to your PC
open a cmd window and navigate to your fastboot directory and execute this command: fastboot flash boot boot.img
now you should push a downloaded ROM to your internal sdcard with this command: adb push *here your ROM name.rar or .zip* storage/sdcard0/
if you get an error of not copying, the add a folder for example storage/sdcard0/Download/ or storage/sdcard0/DCIM/
then you can enter recovery and flash your ROM, you should do a wipe and install, then wipe cache and then reboot.
This should put your phone to work with whatever ROM you install, then to get to stock is another process which includes relocking the bootloader.
Please update so I can give you any more help.
NOTE: any rom you download should be compatible with your CID, check it via fastboot with this command: fastboot getvar cid. Also try to download ARHD from mike1986, in his thread you can find compatible CID. If not try to look for a rom compatible with your CID
Hello JoHnGr0n3,
i have same problem.
in phone was stock ROM, unlock bootloader, TWRP 2.6.1.0 (no nandroid backup )
After installing the official update 4.2.2. cant reboot system only white screen with HTC logo
i tried flash Revolution ROM with yours tutorial...
flash via fastboot
boot.img copied and flashed - OK
but i cant copied any file to "SD" card i used command: adb push Revolution.zip storage/sdcard0/DCIM and wrote me: error device not found
any ideas how to copy ROM on storage?
ENRC2B_U
CID: 032
HBOOT: 1.35
Im sorry for my bad English
If you have a zip (rom) file on your pc you can ADB sideload it. and pull out the boot.img of the rom. install the rom. read the fourth post of this
http://forum.xda-developers.com/showthread.php?t=2066390 Threat
I hope it works!
Correct me if i'm wrong!
THX
@hellboysz
Many thanks :victory:
this is working http://forum.xda-developers.com/showpost.php?p=35897893&postcount=4 :good:

Categories

Resources