Related
Request:
Guys i would need a little favour.
As you may know im 17 years old.
Next year in august my class is going on school trip.
We dont know destination yet but it will probably be Czech Prague.
We would stay there around a week.
It would cost around 450euros + i need some money to spend 150euros.
Why am I asking for donations?
I would really want to go but i dont want my family to spend that kind of money but they cant even afford it.
My rom is one of most downloaded in this section and manny people use my UNLIMITED™tweaks and UNLIMITED™BOOST and i think i would deserve to get some help from you.
Every donation is helpful and I hope you will make this trip possible for me.
Click to expand...
Click to collapse
Hey guys here aret build.prop tweaks which i use in my roms
It will give you big boost
PROCEDURE:
*DELETE EVERYTHING AFTER # ADDITIONAL_BUILD_PROPERTIES INCLUDING IT AND REPLACE WITH THIS ONE CAUSE OF DOUBLE LINES - FOR XPERIA MDPI DEVICES
*FOR ALL OTHER DEVICES COPY FROM ## UNLIMITED™TWEAKS ##
A)
1. Open "Root Explorer" and click the R/W
2. Go to /system/build.prop.
3. Backup yout current build.prop.
4. Long-press on Build.Prop and you’ll see a pop up.
5. Text Editor.
6. Type in those few line of words below into the last line of the text then save.
7.reboot and enjoy
B)
1. Open "Root Explorer" and click R/W
2. Go to /system and copy build.prop to your sd card
3. Copy build.prop to your pc
4. Copy tweaks to your build.prop
5. Move build.prop again to /system and change permission
HERE ARE MINE UNLIMITED™TWEAKS
#
# ADDITIONAL_BUILD_PROPERTIES
#
drm.service.enabled=true
keyguard.no_require_sim=true
net.bt.name=Android
persist.sys.usb.config=mass_storage,adb
ro.com.google.clientidbase=android-sonyericsson
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.google.gmsversion=4.0_r1
ro.drm.active.num=4
ro.drm.active.0=semc,1
ro.drm.active.1=cmla,0
ro.drm.active.2=viaccess,0
ro.drm.active.3=marlin,1
ro.product-res-path=framework/SemcGenericUxpRes.apk
ro.setupwizard.mode=DISABLED
ro.sf.lcd_density=160
ro.semc.xloud.supported=true
ro.usb.pid_suffix=14F
######################
## UNLIMITED™TWEAKS ##
######################
##EXPLANATION
# lines starting with "##" are group titles
# lines starting with "#" are not working on ICS+ or they are cyanogenmod specific if your on GB/cyanogenmod its suggested to remove "#"
## System Tweaks
#debug.sf.nobootanimation=1 # disable bootanimation [to active remove "#"]
dev.bootcomplete=0 # faster booting
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
#ro.HOME_APP_ADJ=1 #no effect in ICS +
ro.mot.eri.losalert.delay=1000
ro.ril.enable.amr.wideband=1
touch.presure.scale=0.001 # better touchscreen sensitivity
## Miscellaneous Tweaks
com.qc.hardware=1 # qualcomm
debug.qctwa.preservebuf=1 # qualcomm
debug.qctwa.statusbar=1 # qualcomm
debug.qc.hardware=true # qualcomm
persist.sys.shutdown.mode = hibernate
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
ro.telephony.sms_segment_size=160
pm.sleep_mode=1
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=75
ro.mot.buttonlight.timeout=1
wifi.supplicant_scan_interval=180
## Signal Tweaks
persist.cust.tel.eons=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
ro.ril.set.mtu1472=1
ro.use_data_netmgrd=true
## Wireless Speed Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
## Makes streaming videos stream faster
media.stagefright.enable-http=true
media.stagefright.enable-meta=true
media.stagefright.enable-player=true
media.stagefright.enable-record=true
media.stagefright.enable-scan=true
## Website Bypass
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
## Graphics Enhancement
#ro.media.dec.jpeg.memcap=20000000 #no effect
ro.media.enc.hprof.vid.bps=8000000 # raise JPG quality to 100%
ro.media.enc.jpeg.quality=100
ro.media.enc.hprof.vid.fps=75
#video.accelerate.hw=1 #no effect on ICS +
## Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
## Scrolling Responsiveness
persist.cust.tel.eons=1
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
windowsmgr.max_events_per_sec=90
## Power Saving Tweaks
#pm.sleep_mode=1 # no effect in ICS +
power_supply.wakeup=enable
proximity_incall=enable
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=1
ro.config.hw_quickpoweron=true
ro.ril.disable.power.collapse=1
ro.ril.sensor.sleep.control=1 # sensor sleep control
usb_wakeup=enable
## Dialing Tweaks
mot.proximity.delay=25
ro.lge.proximity.delay=25
ro.telephony.call_ring.delay=0 # Decrease dialing out delay
## DalvikVM
dalvik.vm.dexopt-data-only=1dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.execution-mode=int:fast
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m # VM Heapsize, higher ram=higher value
dalvik.vm.heapstartsize=5m
dalvik.vm.jmiopts=forcecopy
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.verify-bytecode=false
## Disable Logers (safe battery + performance gain)
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
## Performance
debug.composition.type=gpu
debug.egl.profiler=1 # Enable egl profiler
debug.egl.hw=1
debug.enabletr=true
debug.gr.swapinterval=1
debug.kill_allocating_task=0
#Debug.performance.tuning=1 #no effect on ICS +
debug.qctwa.preservebuf=1
debug.sf.hw=1 # render UI with GPU
dev.pm.dyn_samplingrate=1
ENFORCE_PROCESS_LIMIT=false
hw3d.force=1
#persist.sys.purgeable_assets=1 #cyanogenmod specific
#persist.sys.use_dithering=0 #cyanogenmod specific # when [1] performance are lower but image quality is better
persist.sys.use_16bpp_alpha=1
persist.sampling_profiler=0
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
persist.sys.NV_FPSLIMIT=60
persist.sys.ui.hw=1
#profiler.force_disable_err_rpt=1 # htc specific
#profiler.force_disable_ulog=1 #no effect in ICS +
ro.config.disable.hw_accel=false
ro.debuggable=1
ro.fb.mode=1
ro.kernel.android.checkjni=0
ro.min_pointer_dur=8
ro.min_pointer_dur=1
ro.secure=0
ro.sf.compbypass.enable=1
ro.vold.umsdirtyratio=20
ro.wmt.blcr.enable=0 # Disable the zygote loader
Click to expand...
Click to collapse
Thanks bro, anyone tested the last two? They really give much of a boost? I'm going to flash stock soon so I'll test them then.
Cheers,
Evil.
evilbarcode said:
Thanks bro, anyone tested the last two? They really give much of a boost? I'm going to flash stock soon so I'll test them then.
Cheers,
Evil.
Click to expand...
Click to collapse
Please be quick.
Sent from my Xperia Live with Walkman using Tapatalk
XperianPro said:
Please be quick.
Sent from my Xperia Live with Walkman using Tapatalk
Click to expand...
Click to collapse
Sorry waiting for my battery to charge, before i flash, forgot to charge it last night. Should be done within 30 min hopefully. I'll post back soon.
Cheers,
Evil.
What's the downside of forcing GPU to render UI?
Why isn't this default for all android?
evilbarcode said:
Thanks bro, anyone tested the last two? They really give much of a boost? I'm going to flash stock soon so I'll test them then.
Cheers,
Evil.
Click to expand...
Click to collapse
well everything is much smoother
i tested it
but now i need to see how it affects on battery
_________________
EDIT:
im using minicmsandwich by kamarush
and when i play temple run i get lag now and then
but with this nothing
and it opens preety faster
Here's my build.prop ss.
Any missing tweak?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: what the heck the pict didn't show
Sent from my Nokia 3310
These are my build.prop tweaks. I use them on every ROM I flash...
I thought I might share....
Code:
persist.sys.shutdown.mode=hibernate
debug.sf.nobootanimation=0
ro.kernel.android.checkjni=0
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
mot.proximity.delay=25
ro.lge.proximity.delay=25
ro.mot.eri.losalert.delay=1000
debug.sf.hw=1
video.accelerate.hw=1
windowsmgr.max_events_per_sec=300
wifi.supplicant_scan_interval=1200
pm.sleep_mode=1
ro.ril.disable.power.collapse=1
persist.adb.notify=0
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
persist.sys.use_dithering=0
logcat.live=disable
report on battery life...
my battery lasted preety much same as usual with my usual use
i modded my build.prop with yours and i can definetly see a difference.
phone is more responsive and faster, although scrolling is as it was before.
using CyanogenTimescape
will post soon about the battery usage
Excuse me but I´m intrested in trying all these tweaks and I´m wondering if there is an easy way to to edit the build.prop. What I meen is if there´s a way to edit all lines att the same time through a program?
Thanks in advance
Any tweak for turning screen on by volume rockers?
Sent from my WT19i via XDA Developers app
gualm2 said:
Excuse me but I´m intrested in trying all these tweaks and I´m wondering if there is an easy way to to edit the build.prop. What I meen is if there´s a way to edit all lines att the same time through a program?
Thanks in advance
Click to expand...
Click to collapse
u can try adb mask controler (dont know if it works on our phones)
or u can do this
1.copy build.prop from /system to your /sdcard
2.copy to your computer and copy this tweaks
3.copy your new build.prop to first directory when u open root explorer or root browser and such and paste it there
4.change permission
5.cut it to /system and replace old build.prop
*sry if i explained bad xD
hsrbnr said:
Any tweak for turning screen on by volume rockers?
Sent from my WT19i via XDA Developers app
Click to expand...
Click to collapse
there is some file where u can do that
its just that i cant remember where it is :S
Battery use is actually lower!
:thumbup::thumbup:
Sent from my WT19i using potato
Yeah itsseems good but will they work on xperia neo v?
I´ve noticed that some of these tweaks allready in my build.prop if i rewrite them at the end of my build.prop will they cause any conflicts?
Example:
I´ve noticed the VM heapsize is set to 128m originally but att the end I´ve written that I want it to be 64m, will this cause any conflicts?
I´ve also noticed that some are exactlly the same, what will this cause?
gualm2 said:
I´ve noticed that some of these tweaks allready in my build.prop if i rewrite them at the end of my build.prop will they cause any conflicts?
Example:
I´ve noticed the VM heapsize is set to 128m originally but att the end I´ve written that I want it to be 64m, will this cause any conflicts?
I´ve also noticed that some are exactlly the same, what will this cause?
Click to expand...
Click to collapse
delete the one with 64
and yes they will work on neo v
Hi,
swimon said:
What's the downside of forcing GPU to render UI?
Click to expand...
Click to collapse
That's available in any Sony Xperia stock ICS 4.0x
Go in [Settings] -> [Developer options]
Activate [Force GPU rendering]
swimon said:
Why isn't this default for all android?
Click to expand...
Click to collapse
GPU consume more battery.
Regards.
Sekhen.
mv_style said:
there is some file where u can do that
its just that i cant remember where it is :S
Click to expand...
Click to collapse
Please, can you tell me. I'm on LWW gb 2.3.4
Sent from my WT19i using xda app-developers app
Hello all from research and test o my rom dev discovered this and want share it with all can help ^^
The following lines in the build.prop file can be added and edited to change several properties in your device:
Warning USE only unix formatting compatible editors like Notepad++
debug.sf.hw = 1
Render UI with GPU (relieves pressure on CPU)
dalvik.vm.heapsize = 32m
Set size of Dalvik VM heap (how much RAM each instance of the VM is allowed); depending on how much RAM that is available to a device, this can be increased.
persist.adb.notify = 0
Stop debugging icon from appearing in status bar
windowsmgr.max_events_per_sec = 120
Increase to improve scrolling response
persist.sys.use_dithering = 0
Do not use surface dithering (surface dithering improves image quality)
debug.sf.nobootanimation = 1
Disable boot animation
ro.HOME_APP_ADJ = 1
force home launcher into memory
ro.sf.lcd_density = 240
Set screen density; change according to your device or what suits you, a lower value will display more but may be too small to use on a device with a smaller screen. Also note that changing the pixel density will make some applications in the new market ‘incompatible with your device’.
mot.proximity.delay = 150
Lower to fix black screen after calls issue
ro.telephony.call_ring.delay = 0
Decrease dialling out delay
ro.gsm.2nd_data_retry_config = max/_retries=3, 2000, 2000, 2000
Change MMS APN retry timer from 5s to 2s
wifi.supplicant_scan_interval = 120
ro.ril.disable.power.collapse = 0
pm.sleep_mode = 1
Increase battery saving potential
ro.com.android.dataroaming=true
Enables data-roaming by default in the build
ro.com.android.dateformat=dd-MM-yyyy
Changes default date format to day-month-year
ro.config.alarm_alert=*.ogg
ro.config.ringtone=*.ogg
ro.config.notification_sound=*.ogg
Changes the default sounds for each item. Must correlate to ogg files available in /system/media/audio/
ro.build.display.id=NAMEOFROM
In Settings>About Phone, it lists the name of the build number. This is where you set it.
ro.product.locale.language=en
ro.product.locale.region=GB
Sets the default region and language. You must have the correct letter combo, and the language must be available for this to work.
video.accelerate.hw=1 or 0
Whether to use hardware acceleration to render videos, doesn’t work on all devices
Click to expand...
Click to collapse
Nice work mate Will help new developers greatly Keep it up
Ps; Make sure to mention on your thread to use only unix formatting compatible editors like Notepad++ and not WordPad ;D
Cheers
Part II
# System Tweaks
ro.HOME_APP_ADJ=1
ro.mot.eri.losalert.delay=1000
ro.config.hw_fast_dormancy=1
ro.ril.enable.amr.wideband=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Miscellaneous Tweaks
persist.sys.purgeable_assets=1
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
debug.qctwa.statusbar=1
debug.qctwa.preservebuf=1
debug.qc.hardware=true
com.qc.hardware=true
ro.telephony.sms_segment_size=160
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
ro.config.hw_fast_dormancy=1
persist.sys.shutdown.mode = hibernate
ro.config.hw_power_saving=true
ro.media.enc.hprof.vid.fps=65
ro.mot.buttonlight.timeout=1
# Signal Tweaks
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
persist.cust.tel.eons=1
# Wireless Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.ipv4.tcp_ecn=0
net.ipv4.route.flush=1
net.ipv4.tcp_rfc1337=1
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_fack=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_wmem=4096 39000 187000
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_moderate_rcvbuf=1
# Makes streaming videos stream faster
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=true
# Website Bypass
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# Graphics Enhancement
debug.performance.tuning=1
video.accelerate.hw=1
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Disables data sent and logging
ro.config.nocheckin=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Scrolling Responsiveness
windowsmgr.max_events_per_sec=120
persist.cust.tel.eons=1
# Power Saving Tweaks
ro.ril.disable.power.collapse=1
pm.sleep_mode=1
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# DalvikVM
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.dexopt-data-only=1dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.jmiopts=forcecopy
# Performance---> gpu cpu tunning
debug.composition.type=gpu
debug.composition.type=cpu
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Debug.performance.tuning=1
debug.egl.profiler=1
debug.egl.hw=1
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.min_pointer_dur=8
debug.kill_allocating_task=0
persist.sys.ui.hw=1
ro.debuggable=1
ro.config.disable.hw_accel=false
ro.kernel.android.checkjni=0
persist.sys.purgeable_assets=0
persist.sys.use_dithering=0
ro.secure=0
ro.min_pointer_dur=1
# Sound---> sound quality
af.resampler.quality=255
af.resample=48000
# Hwui----> hardwae ui cache
ro.hwui.text_cache_width=2048
Click to expand...
Click to collapse
Brilliant!!
you can aply him
1. With a root explorer(I prefer ES file explorer), copy /system/build.prop to the root of the internal sdcard (/mnt/sdcard).
2. Connect phone to computer and copy the file on your computer.
3. With Notepad++, open build.prop and edit it. Be careful as some of the parameters already exist. Just change their values.
4. Save and copy the file back to your phone's root.
5. Overwrite /system/build.prop with the edited file.
6. Make sure that the permissions are still rw-r--r--:
7. Reboot into recovery and wipe cache and dalvik cache.
8. New values should be applied now.
9. Enjoy
Click to expand...
Click to collapse
and you can mix this with some other solution like this ---->
Optimize Tool Box 15 powerful functions
Click to expand...
Click to collapse
How to add more language support ?
yes you can add more language to your android device how to make this ?
1- download needed language you can use any (font) from any rom you need
2- flash it with CWM or copie him with root tool like root explorer
3- go into build.prop and find this line
Code:
#Default values/Locales for the hiding languages feature
ro.product.locale.excluded=EN_FR_XXXXXXXX
just add "#" like this
Code:
#Default values/Locales for the hiding languages feature
#ro.product.locale.excluded=ar_EG ar_IL fa_IR iw_IL
Click to expand...
Click to collapse
that all here result when you reboot
This is my first post in the android development section. Hope you guys like it.
FEATURES :
* Better Battery
- Deep Sleep Mode
- Scans WiFi Less Frequently (Saves Battery)
* Image Quality Increased
* Streams Video Faster
* Better Touch Response
* Faster Reboot
* Instant Call
- No Delay In Receiving/Making Calls
* Faster Launcher
- No/Very Little Lag
- Forces Launcher Into Memory
* Fixes FC Issues With Some Apps
* Fixes “Black Screen” Issue After Call
- Screen Appears Almost Instantly After Pulling Phone Away From Face
* Audio & Video Quality Increased
* Signal Tweaks
* Download & Upload Speed Increased
* Dalvic VM Tweaks
* Loads App Faster
* Frees More RAM
* Overall Performance Increased
And Many More ...
Instructions :
1) Copy the build.prop from /system to your SD card, transfer it to your computer, open it with notepad ++.
2) Add the following lines to it :
#
ADDITIONAL_BUILD_PROPERTIES
#
debug.performance.tuning=1
debug.sf.hw=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition. type =gpu
# Faster Streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Better Image & Audio Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Net Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Google DNS
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.ril.fast.dormancy.rule=0
# Frees More RAM
persist.sys.purgeable_assets=1
# Signal Tweaks
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.hsupa.category=6
# Fast Reboot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Lock App In Memory
sys.keep_app_1=enter the package name of the app.
# Other Tweaks
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.mot.eri.losalert.delay=1000
dalvik.vm.execution-mode=int:jit
ro.config.hwfeature_wakeupkey=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
persist.adb.notify=0
vm.stat_interval=1
persist.android.strictmode=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true;
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
#
# Experimental Tweaks
#
#touch.presure.scale=0.001
#ro.min_pointer_dur=8
#ro.media.enc.hprof.vid.fps=65
# No BootAnimation For Faster Reboot - Remove # Below To Enable
#debug.sf.nobootanimation=1
# May Improve Pictures - Remove # Below To Enable
#ro.media.cam.preview.fps=0
3) Save the file & close.
4) Transfer the edited build.prop to your SD card.
5) Using root explorer, move it to /system, set permissions to rw--r-r-.
6) Reboot into recovery, wipe dalvic cache & reboot.
Done !
Note :
1) There are some experimental tweaks. To enable them, remove the # from the starting of the lines as stated.
2) DO NOT DELETE THE #AT THE LINE, EXPERIMENTAL TWEAKS.
3) There is a line that allows you to lock the launcher in memory. Enter the package name of the app/launcher you wanna lock there.
For example, the package name for Trebuchet is, com.cyanogenmod.trebuchet
4) If the line,
#
ADDITIONAL_BUILD_PROPERTIES
#
is already present in your original build.prop, just copy all the lines below it, other than it & paste them & follow the steps stated above.
Tested & working on CM10.1 beta7 by Wayland_ace !
Credits :
1) TopDroid for his original work.
2) Venomous Viper 119 ( me ) for sharing it here
If you want to use this in your ROM, don't even take my permission ! Just give credits to the right person, that's enough ! I'm just sharing it here !
Sent from my GT-S5830 using xda premium
There might be some flaws in the lines as these tweaks weren't made for ace remotely. I just tested & they worked. So I shared. Any corrections, I'm always happy to be noticed
Sent from my GT-S5830 using xda premium
why wont it work on other based roms like CM 7.2? lot of my stuff on CM 7.2 looks like that. just asking...
for proximity
mot. and lge. are for LG phones and motorola phones
they wont work
just a suggest
and all
ro.mot
ro.lge lines do not work
also the ril.htcmask wont have any affect
Sent from my S500 using xda app-developers app
benna said:
why wont it work on other based roms like CM 7.2? lot of my stuff on CM 7.2 looks like that. just asking...
Click to expand...
Click to collapse
You can give it a try. If it works then, great !
SpaceCaker said:
for proximity
mot. and lge. are for LG phones and motorola phones
they wont work
just a suggest
and all
ro.mot
ro.lge lines do not work
also the ril.htcmask wont have any affect
Thanks for your valuable suggestion ! Currently I've removed those lines from op. Can you please help me with the correct lines ?
Sent from my S500 using xda app-developers app
Click to expand...
Click to collapse
Sent from my GT-S5830 using xda premium
Anyone tried the tweaks on other builds ? If yes, please report what changes have you noticed.
Sent from my GT-S5830 using xda premium
Since this is a share, shouldn't this thread be in the general section?
Code:
# DalvikVM tweaks
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-data-only=1
Xr01d_GT said:
Since this is a share, shouldn't this thread be in the general section?
Code:
# DalvikVM tweaks
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.heapsize=64m
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.dexopt-data-only=1
dalvik.vm.dexopt-data-only=1
Click to expand...
Click to collapse
As far as I know, only discussion threads & query threads for roms are posted in the general section (correct me if I'm wrong) . And these tweaks aren't purely shared, I had to remove some lines & make some adjustments to make them easily equipping/usable .
Sent from my GT-S5830 using xda premium
I am using all of these above and I fell sigificant improvement. Why all of these are not applied to ROMs? I used a bit of wifi, 2G, 3G, texts and a few calls and there is still 49% since 9a.m. uncharge. and the awake after sleep is boosted. I am really suprised with that and also worried why nobody comments and test???
Czepek said:
I am using all of these above and I fell sigificant improvement. Why all of these are not applied to ROMs? I used a bit of wifi, 2G, 3G, texts and a few calls and there is still 49% since 9a.m. uncharge. and the awake after sleep is boosted. I am really suprised with that and also worried why nobody comments and test???
Click to expand...
Click to collapse
First... I'm back on xda after a long time. Happy to be back . Well, many threads go down due to lack of scope like this here. Can't help
Sent from my GT-S5830 using xda premium
thx dude
koQQen said:
thx dude
Click to expand...
Click to collapse
If you really wanna say so, hit the button !
Sent from my GT-S5830 using xda premium
The suggested build.prop seems to be working really well for my Galaxy S2 i9100 with Dirty Unicorns rom 4.4. I was experiencing some really annoying delays and freezes with my phone, but after applying the new build.prop everything is working pretty much flawlessly! Big thanks to the author!
I just bricked my phone either i wasnt doing it properly or something btw does this work with the ace s5380i and if so can u make a video tutorial please.
Thanks in advance.
JAMDIZZY said:
I just bricked my phone either i wasnt doing it properly or something btw does this work with the ace s5380i and if so can u make a video tutorial please.
Thanks in advance.
Click to expand...
Click to collapse
The tweaks should work with ace-i. I'm sorry but I don't own the ace anymore, so no video tutorials
script replacement or edit to existing ?
hi,.
i've post few questions about tweaking build.prop here
http://forum.xda-developers.com/showthread.php?t=2351849&page=3#post59443281
would you mind to give some inputs to best settings and tweak suggestions
thanks
---------- Post added at 02:47 AM ---------- Previous post was at 02:03 AM ----------
which one should be the value of no boot ?
debug.sf.nobootanimation=0
or
debug.sf.nobootanimation=1
the boot of cyanogen initials its work and all developer should have initials boot right,.
for me in counts around 60 circulation before the home screen appears, is it normal ?
---------- Post added at 03:15 AM ---------- Previous post was at 02:47 AM ----------
I cant see the difference,.
which one should be picked and used for my solana ?
your script as following:
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
Top Droid as following:
persist.sys.use.dithering=1
Improves Screen Quality At The Cost Of Performance
---------- Post added at 03:40 AM ---------- Previous post was at 03:15 AM ----------
your value are the same with my build.prop from existing cm10.1 nightly solana
windowsmgr.max_events_per_sec=90
while topdroid values are:
windowsmgr.max_events_per_sec=275
your edit means no tweak for my solana, but is it best to increase the wait time into 275 ?
what do you suggest,.
Cm 10.1 not booting
Venomous Viper 119 said:
This is my first post in the android development section. Hope you guys like it.
FEATURES :
* Better Battery
- Deep Sleep Mode
- Scans WiFi Less Frequently (Saves Battery)
* Image Quality Increased
* Streams Video Faster
* Better Touch Response
* Faster Reboot
* Instant Call
- No Delay In Receiving/Making Calls
* Faster Launcher
- No/Very Little Lag
- Forces Launcher Into Memory
* Fixes FC Issues With Some Apps
* Fixes “Black Screen” Issue After Call
- Screen Appears Almost Instantly After Pulling Phone Away From Face
* Audio & Video Quality Increased
* Signal Tweaks
* Download & Upload Speed Increased
* Dalvic VM Tweaks
* Loads App Faster
* Frees More RAM
* Overall Performance Increased
And Many More ...
Instructions :
1) Copy the build.prop from /system to your SD card, transfer it to your computer, open it with notepad ++.
2) Add the following lines to it :
#
ADDITIONAL_BUILD_PROPERTIES
#
debug.performance.tuning=1
debug.sf.hw=1
video.accelerate.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition. type =gpu
# Faster Streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-record=false
# Better Image & Audio Quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.jpeg.quality=100
# Net Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Google DNS
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
ro.ril.fast.dormancy.rule=0
# Frees More RAM
persist.sys.purgeable_assets=1
# Signal Tweaks
ro.ril.enable.amr.wideband=1
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=8
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.hsupa.category=6
# Fast Reboot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Lock App In Memory
sys.keep_app_1=enter the package name of the app.
# Other Tweaks
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.mot.eri.losalert.delay=1000
dalvik.vm.execution-mode=int:jit
ro.config.hwfeature_wakeupkey=0
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
persist.adb.notify=0
vm.stat_interval=1
persist.android.strictmode=0
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true;
# Improves Camera & Video Results
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=true
#
# Experimental Tweaks
#
#touch.presure.scale=0.001
#ro.min_pointer_dur=8
#ro.media.enc.hprof.vid.fps=65
# No BootAnimation For Faster Reboot - Remove # Below To Enable
#debug.sf.nobootanimation=1
# May Improve Pictures - Remove # Below To Enable
#ro.media.cam.preview.fps=0
3) Save the file & close.
4) Transfer the edited build.prop to your SD card.
5) Using root explorer, move it to /system, set permissions to rw--r-r-.
6) Reboot into recovery, wipe dalvic cache & reboot.
Done !
Note :
1) There are some experimental tweaks. To enable them, remove the # from the starting of the lines as stated.
2) DO NOT DELETE THE #AT THE LINE, EXPERIMENTAL TWEAKS.
3) There is a line that allows you to lock the launcher in memory. Enter the package name of the app/launcher you wanna lock there.
For example, the package name for Trebuchet is, com.cyanogenmod.trebuchet
4) If the line,
#
ADDITIONAL_BUILD_PROPERTIES
#
is already present in your original build.prop, just copy all the lines below it, other than it & paste them & follow the steps stated above.
Tested & working on CM10.1 beta7 by Wayland_ace !
Credits :
1) TopDroid for his original work.
2) Venomous Viper 119 ( me ) for sharing it here
If you want to use this in your ROM, don't even take my permission ! Just give credits to the right person, that's enough ! I'm just sharing it here !
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
i did your tweek on cm 10.1 p3100 but unfortunately i am stuck at boot
jspdjanggo said:
hi,.
i've post few questions about tweaking build.prop here
http://forum.xda-developers.com/showthread.php?t=2351849&page=3#post59443281
would you mind to give some inputs to best settings and tweak suggestions
thanks
---------- Post added at 02:47 AM ---------- Previous post was at 02:03 AM ----------
which one should be the value of no boot ?
debug.sf.nobootanimation=0
or
debug.sf.nobootanimation=1
the boot of cyanogen initials its work and all developer should have initials boot right,.
for me in counts around 60 circulation before the home screen appears, is it normal ?
---------- Post added at 03:15 AM ---------- Previous post was at 02:47 AM ----------
I cant see the difference,.
which one should be picked and used for my solana ?
your script as following:
# Enable Surface Dithering Which Will Raise Image Quality At The Cost Of Performances - 1=ON;0=OFF
persist.sys.use_dithering=0
Top Droid as following:
persist.sys.use.dithering=1
Improves Screen Quality At The Cost Of Performance
---------- Post added at 03:40 AM ---------- Previous post was at 03:15 AM ----------
your value are the same with my build.prop from existing cm10.1 nightly solana
windowsmgr.max_events_per_sec=90
while topdroid values are:
windowsmgr.max_events_per_sec=275
your edit means no tweak for my solana, but is it best to increase the wait time into 275 ?
what do you suggest,.
Click to expand...
Click to collapse
If the lines are same as in you ROM's default build.prop, just delete the ones from my tweaks. The no boot animation line just disables the boot animation on startup. In other words, you don't see the boot animation. This line has nothing to do with the boot time. The boot time depends on your apps and settings.
Sent from my Nexus 5 using Tapatalk
applesaw said:
i did your tweek on cm 10.1 p3100 but unfortunately i am stuck at boot
Click to expand...
Click to collapse
Some lines must be conflicting. Just delete them and you'll be good to go!
Sent from my Nexus 5 using Tapatalk
With permission from @ cr3pt .... Thanks
CrystalPa2.0:
Inside:
- Android 4.4.2
- Based on latest AOSPA 4.x
- Slim version
- AOSP skin
- Rom function:
* Own rom settings
* Option for enable navigation bar
* Option for disable bootanimation (Faster boot)
* New battery style
* Information about partition
* Information about CPU
* Options for set Clock and Date
* HALO from PA 3.x
Chanelog
version 1.0
- Latest AOSPA 4
- Added HALO
- New animation qs
- Added BatteryBar
- Added settings for clock and date
- Added option for enable navbar (not work = just wait for fix in next update)
- Added information about partition
- Added option for enable high gfx
- Added option for disable bootanimation
- Changed DPI to 140
- Added information about processor
version 2.0
- Tab settings - like in sgs3
- The real dark crystal - ported from slim
- Many changes in system design - kitkat
- Launcher settings
- Update sources from AOSPA
- Updated kernel
* KGSL 2.7 (from THLG)
* added undervolt
* SWAP
Chanelog
version 2.1
+Viper4Andrid Fx
+AOSPmusic
+OmniSwitch
New system/lib
New busybox
New zapaling
New inid.d por AOSP_vanir
New gapps!!
The sms app been deleted, download hangouts.
Chanelog
Version 3.0
- Added OmniSwitch i SlimRecent
- Possible change with OmniSwitch i SlimRecent
- Added Listview animation
- Added PIE
- Update sources (AOSPA-legacy)
- Removed HALO
- Few other changes inside sources
- New settings in CrystalPA - better look
- Fixed bug localization settings
Chanelog
Version 3.1
New Dark Crystal ( DarkGlas)
Roboto Condensed Fonts (for Caliban)
Black Matrix Bootanimation (for Caliban)
Tun.ko,frandom.ko and openvpn binary added
zRam enabled
+Bin
+Lib
+Xbin
+bionic_and_dalvik
Added trebuchet with app drawer icon Nexus
ICS background
- Removed apk MMS
Added hangouts.
Better sound and enhanced
New Viper4Adroid Fx (Nice, nice....)
Speaker Profiles and response to Viper4andrid Fx (only passed to the sd)
And much more!
Rom:
https://mega.co.nz/#!J4tBzAIT!6nbJAV_jlsJCoAEwjGtUCJH7wz1LFFRmJD0TGhmJYgQ
Kerne+OC
https://mega.co.nz/#!VpFHABTb!FeKA8qhXF3TfoPftbs1o6QQybd2MuHQ71X5sAR-PR3I
Current-Minimalist-DHO-GAPPs
https://mega.co.nz/#!x0VFWYxQ!HQOrtQuzpjBkwoFNv95hwlYlp8d8yBnUi3CIjgtaYpo
Estra for Viper4android Fx
https://mega.co.nz/#!Yx1ykCCI!fVZBgZvd57koQ1PZKYxvLbBq_OcOamPecxpwR0TM-bo
FIX Dialer
https://mega.co.nz/#!E8FSnY5b!FwEJG4CI23pam7Y2yLq7uOCWAwv1Nn7q7giDaBDCt6w
Enjoy it
hm good idea,but cr3pt have do it for l5 since 2 days or so,but 2 are better than one.maybe you added things or solved lil bugs or something,is mms/sms apk and accesebility settings issue solved in this rom?
does this oc kernel work without issues for you on this rom?
This is already installed on multiple devices and everything just right accesebility theme settings still fails, Llos sms me yet nobody complained facebook group and the kernel going great
Caliban you and I have to talk very seriously hahaha no joke but there to improve carbon rom
i know this bro,next one will be much better.so i rename it because im working currently on invert the whole rom to black,most bugs are solved,except statusbar trans and root issue,i have used every build as my daily rom and haved non of the posted bugs except with root.
Well if you feel like we can merge this with your rom as I miss?
what merging with my rom?
-CALIBAN666- said:
what merging with my rom?
Click to expand...
Click to collapse
if your crystalpa with mine, try and really draw you a smile, new bin, new lib, xbin new sound a blast ....
i use some files from it but not all is working,because its paranoid they have differences,the most bugs i have solved with files from latest cm11 r4 nightly from a completely other phone,like gps,dsp,bluetooth etc
---------- Post added at 02:20 AM ---------- Previous post was at 02:18 AM ----------
the buildprop tweaks are the same as from old vanir build,i use this to since long time and its cool
-CALIBAN666- said:
i use some files from it but not all is working,because its paranoid they have differences,the most bugs i have solved with files from latest cm11 r4 nightly from a completely other phone,like gps,dsp,bluetooth etc
---------- Post added at 02:20 AM ---------- Previous post was at 02:18 AM ----------
the buildprop tweaks are the same as from old vanir build,i use this to since long time and its cool
Click to expand...
Click to collapse
So what I did is good about vanir hahaha I do not put that I see that is not working ... I will proado your roms and I get 3800 in AnTuTu v3.3 and have no proado and soar to 4500 .. . tines that I look
the buildprop tweaks are great,but antutu score says nothing,because sometimes you get low score with an great device like nexus 4 (haved it many times)and than with a low specdevice you become the highscores,so its useless to look on antutu score,for such things its better to use quadrant,its more professional benchmark,not like antutu.
and i dont know,but i think the most peeps dont know about a real benchmark which need time for stresstests,stabillitytests etc.such benchmarks cone need hours.antutu is only for show others hey look my phone gots 1000000 points,so what mine have only 50000 but its much smoother,true storys,no joke.
-CALIBAN666- said:
the buildprop tweaks are great,but antutu score says nothing,because sometimes you get low score with an great device like nexus 4 (haved it many times)and than with a low specdevice you become the highscores,so its useless to look on antutu score,for such things its better to use quadrant,its more professional benchmark,not like antutu.
and i dont know,but i think the most peeps dont know about a real benchmark which need time for stresstests,stabillitytests etc.such benchmarks cone need hours.antutu is only for show others hey look my phone gots 1000000 points,so what mine have only 50000 but its much smoother,true storys,no joke.
Click to expand...
Click to collapse
I appreciate this information that I ignored on AnTuTu
Check out my build.prop
begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KVT49L
ro.build.display.id=pa_e610-userdebug 4.4.2 KVT49L eng.zodex.20140320.193014 test-keys
ro.build.version.incremental=eng.zodex.20140320.193014
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=czw, 20 mar 2014, 19:33:18 CET
ro.build.date.utc=1395340398
ro.build.type=userdebug
ro.build.user=zodex
ro.build.host=zodex-G41MT-D3
ro.build.tags=test-keys
ro.product.brand=lge
ro.product.name=u0_open_eu
ro.product.board=e610
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=es
ro.product.locale.region=ES
ro.wifi.channels=
ro.board.platform=msm7x27a
# ro.build.product is obsolete; use ro.product.device
ro.build.product=e610
ro.product.model=LG-E610
ro.product.device=e610
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=u0_open_eu-user 4.0.3 IML74K lge610-V10a.20120418.144808 release-keys
ro.build.fingerprint=lge/u0_open_eu/u0:4.0.3/IML74K/lge610-V10a.20120418.144808:user/release-keys
ro.build.characteristics=phone
# end build properties
#
# from device/lge/e610/system.prop
#
#
# system.prop for e610
#
persist.sys.root_access=3
ro.ksm.default=1
ro.ext4fs=1
ro.sf.lcd_density=140
ro.crystalpa.version= FULL 1.0
persist.service.swiqi3.enable=1
ro.service.swiqi3.supported=true
persist.service.swiqi.enable=1
ro.service.swiqi.supported=true
persist.audio.handset.mic.type=digital
persist.audio.dualmic.config=endfire
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=false
af.resampler.quality=255
audio.offload.buffer.size.kb=32
audio.offload.gapless.enabled=false
av.offload.enable=true
persist.radio.mode_pref_nv10=1
media.aac_51_output_enabled=true
debug.egl.recordable.rgba8888=1
ro.qc.sensors.wl_dis=true
persist.radio.custom_ecc=1
ro.input.noresample=1
persist.sys.dun.override=0
# Qualcomm specific tweaks. Might cause reboot on other.
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Render UI with GPU and GPU tweaks
debug.composition.type=gpu
debug.egl.hw=1
debug.sf.hw=1
ro.sf.compbypass.enable=0
# Enable harware egl profile
debug.egl.profiler=1
# Enable tile rendering
debug.enabletr=true
persist.sys.composition.type=gpu
# 16BIT transparency, Smother Scrolling
persist.sys.use_16bpp_alpha=1
# 3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
# Device supports EHRPD
ro.config.ehrpd=true
# System prop for tethering denied
ro.tether.denied=false
# Possible screen glitch fix
debug.gr.numframebuffers=3
# Disable debugging notify icon on statusbar
persist.adb.notify=0
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# Graphic Optimization
ro.min_pointer_dur=1
# Graphic Tweaks
ro.product.gpu.driver=1
debug.gr.swapinterval=0
# Phone will not wake up from hitting the volume rocker
ro.config.hwfeature_wakeupkey=0
# Unlock phone by menu key
ro.config.hw_menu_unlockscreen=false
# Save power while phone is in sleep mode
ro.ril.disable.power.collapse=1
# Ringtone rings without delay
ro.telephony.call_ring.delay=0
# The wifi scan interval in seconds so you can use a lower or higher value.
wifi.supplicant_scan_interval=180
# Better scrolling responsiveness
windowsmgr.max_events_per_sec=390
ro.max.fling_velocity=22000
ro.min.fling_velocity=10000
# Better Touch Responsiveness
touch.presure.scale=0.001
# Support for ipv4 and ipv6
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
# Faster boot
persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
# Better battery life
ro.config.hw_fast_dormancy=1
ro.config.hw_power_saving=true
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Battery Tweaks
pm.sleep_mode=1
# Enable 16 BIT
debug.fb.rgb565=1
# VM tweak
ro.vold.umsdirtyratio=20
# Disable Zygote loader
ro.wmt.blcr.enable=0
ro.zygote.disable_gl_preload=true
# Better in call voice quality
ro.ril.enable.amr.wideband=1
# Fix some application issues/Disable kernel error logging
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Disables data sent and logging.
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
ro.config.nocheckin=1
# Enable surface dithering
persist.sys.use_dithering=0
# Allow purging of assets
persist.sys.purgeable_assets=0
# Force launcher into memory
ro.HOME_APP_ADJ=1
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
dev.pm.dyn_samplingrate=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
persist.sys.ui.hw=1
video.accelerate.hw=1
# FPs Booster
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Ram Tweaks
persist.sys.purgeable_assets=1
# Net Speed Tweaks
net.tcp.buffersize.default=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,16384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
# Google DNS
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
# DalvikVM
dalvik.vm.dexopt-data-only=1
dalvik.vm.debug.alloc=0
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=128m
dalvik.vm.heaptargetutilization=0.25
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=2m
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.jniopts=forcecopy
dalvik.vm.jit.codecachesize=0
dalvik.vm.checkjni=false
dalvik.vm.execution-mode=int:jit
dalvik.vm.verify-bytecode=false
dalvik.gc.type=precise
persist.sys.dalvik.vm.lib=libdvm.so
lpa.decode=false
lpa.use-stagefright=false
debug.camcorder.disablemeta=1
persist.sys.force_hw_ui=true
ro.hwui.disable_scissor_opt=false
ro.hwui.texture_cache_size=10
ro.hwui.layer_cache_size=8
ro.hwui.gradient_cache_size=0.5
ro.hwui.patch_cache_size=128
ro.hwui.path_cache_size=2
ro.hwui.shape_cache_size=0.5
ro.hwui.drop_shadow_cache_size=1
ro.hwui.fbo_cache_size=8
ro.hwui.r_buffer_cache_size=2
ro.hwui.texture_cache_flush_rate=0.6
ro.hwui.text_small_cache_width=800
ro.hwui.text_small_cache_height=256
ro.hwui.text_large_cache_width=1200
ro.hwui.text_large_cache_height=512
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.google.clientidbase=android-google
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Titania.ogg
ro.config.notification_sound=Tethys.ogg
ro.config.alarm_alert=Osmium.ogg
ro.build.selinux=1
ro.pa.device=e610
persist.sys.dun.override=0
ro.modversion=4.2-BETA1-20140320
ro.pa.version=4.2-BETA1
ro.com.android.dataroaming=false
ro.carrier=unknown
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
persist.radio.apm_sim_not_pwdn=1
ro.telephony.call_ring.multiple=0
ro.telephony.ril_class=LGEQualcommUiccRIL
ro.telephony.ril.v3=qcomdsds
ro.telephony.default_network=0
telephony.lteOnGsmDevice=0
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d/dev/smd0
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
ro.opengles.version=131072
hwui.render_dirty_regions=false
wifi.interface=wlan0
persist.service.adb.enable=1
ro.fuse_sdcard=true
debug.gralloc.map_fb_memory=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=false
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
persist.webview.provider=classic
ro.soundrecorder.default_wav2ch=true
ro.cwm.forbid_format=/persist-lg,/mpt
ro.cwm.forbid_mount=/persist-lg,/mpt
ro.debuggable=1
net.bt.name=Android
i know i have downloaded,lol
-CALIBAN666- said:
i know i have downloaded,lol
Click to expand...
Click to collapse
ops have seen a failure to my build.prop, clears the fields 188 and 189
# Allow purging of assets
persist.sys.purgeable_assets=0
The dialer app has some issues, the incoming call can not be rejected and the outgoing call can not be cut.
Abhijeetsinghvsf said:
The dialer app has some issues, the incoming call can not be rejected and the outgoing call can not be cut.
Click to expand...
Click to collapse
If you have already corrected the error in the next few hours new build!
New buid 2.1
(PORT)[ROM] CrystalPA 2.1 for E610 [Android 4.4.2][KVT49L]
:victory:
Wow, really great ROM, fast, smooth. Just that I can't access accessibility in settings, when I press it, it fc. Also YouTube HD playback, doesn't reproduce correctly, it "lags". Otherwise I really like this ROM, Thanks
Enviado desde mi LG-E610 mediante Tapatalk
Just For Rooted Devices
The best build.prop tweak for Grand Prime 4.4.4 ( Fully tested on (530H-DV))
Before doing anything plz backup your main build.prop located in root/system/build.prop
Here is some Enhancements:
1. Supreme Battery life (even more in idle)
2. Smoother experience
3. 3G Speed hacks (new)
If u faced any problem please change "ro.ril.hsdpa.category=24" to "ro.ril.hsdpa.category=20"
4. Google DNS
5. Better Microphone
6. More Ram
7. Better signal reception
8. Wireless Tweaks
9. Smoother video streaming and tweak media
10. Increase the Antutu Score (new)
11. Faster Boot-Animation FPS (new)
12. Better call voice quality (new)
13. Game tweaks
14. Qualcomm Tweaks
15. Multi Users (Enabled) (new)
U can Use Root Explorer app to edit your build.prop
Remember to set the permission to rw-r-r after editing
These tweaks are fully operational for my phone (530H-DV)
Please always pay attention to risk of soft bricking
If anything goes wrong use your backup Build.prop to get the default settings
#Method 2 : Manually Editing (much more safer for inexperienced users ) RECOMMENDED
Version 2
Update date : 13 July 2015
Working SM-G530H
adblocker said:
Here we go...
The best build.prop tweak for Grand Prime 4.4.4 ( Fully tested on (530H-DV))
Before doing anything plz backup your main build.prop located in root/system/build.prop
here is some changes:
1. Supreme Battery life (even more in idle)
2. Smoother experience
3. 3G Speed hacks
4. Google DNS
5. Better Microphone
6. More Ram
7. Better signal reception
8. Wireless Tweaks
9. Smoother video streaming and tweak media
10. more...
U can Use ( Root Explorer )app to edit your build.prop
Remember to set the permission to rw-r-r
These tweaks are fully operational for my phone (530H-DV)
Please always pay attention to risk of soft bricking
If anything goes wrong use your backup Build.prop to get the default settings
Click to expand...
Click to collapse
How to use this mate? in detailed please
Mr.IDK said:
How to use this mate? in detailed please
Click to expand...
Click to collapse
-Just download the link.
-Copy original build.prop using rootex root/system and paste to your sdcard for backup.
-put the build.prop you download and push into root/system
-change permission to rw-r--r--
-reboot your device
Sent from my SM-G530H using XDA Free mobile app
any way to activate USB OTG on Grand Prime ?
shahi.persian said:
any way to activate USB OTG on Grand Prime ?
Click to expand...
Click to collapse
That's a hardware limitation.
Bruh... it works.
shahi.persian said:
any way to activate USB OTG on Grand Prime ?
Click to expand...
Click to collapse
Grand Prime (All Models) Doesn't support OTG since it can't bring power for external USB devices So it cant be a USB Host ... its just a USB Client .
Hardware doing it doesn't exits on Mainboard
However I put a option for it and it s ON in build.prop Just for you
deyene said:
-Just download the link.
-Copy original build.prop using rootex root/system and paste to your sdcard for backup.
-put the build.prop you download and push into root/system
-change permission to rw-r--r--
-reboot your device
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
Thanks mate... but what is the build.prop anyways?
where do I locate that?
haha sorry for the question, I want to know more than a simple tutorial.
Mr.IDK said:
Thanks mate... but what is the build.prop anyways?
where do I locate that?
haha sorry for the question, I want to know more than a simple tutorial.
Click to expand...
Click to collapse
Open your root explorer, open the system folder. and u will see build.prop
Sent from my SM-G530H using XDA Free mobile app
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
KM_exeryon said:
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
Click to expand...
Click to collapse
Did you made a nandroid backup? If not, factory reset from recovery, if that doesn't help, flash stock rom.
KM_exeryon said:
HELP MY UNIT GOT SOFTBRICKED. WHAT SHOULD I DO????????:crying::crying::crying:
Click to expand...
Click to collapse
Sorry for it ...I think you didn't change the permission to rw-r-r but don't worry
Just put your backup build.prop in the system folder in the file I attached .Try the 1st one and reboot.
if it doesn't work try the second
flash it with custom recovery.\
if it doesn't work try the second
tell me about it . If they don't work we have more options don't worry.
Has anyone already comproved that the tweaks works? and improves the general performance?
what is post newer? post#1 or post#13?
post #13 is for fixing permission?
Sent from my SM-N9005 using Tapatalk
roozbeh158 said:
what is post newer? post#1 or post#13?
post #13 is for fixing permission?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
nope the last post is for recovery the default build.prop
adblocker said:
Sorry for it ...I think you didn't change the permission to rw-r-r but don't worry
Just put your backup build.prop in the system folder in the file I attached .Try the 1st one and reboot.
if it doesn't work try the second
flash it with custom recovery.\
if it doesn't work try the second
tell me about it . If they don't work we have more options don't worry.
Click to expand...
Click to collapse
my unit is fine now. what i did was i flashed my unit via odin and now i'm thinking if i still try to modify my unit using your build.prop.
i just want to ask if your modified "build.prop" is applicable to ALL grandprime firmwares?? another thing is that i want to suggest that in your tutorial please include the troubleshooting of our unit in case of failure. I made back-up the last time i try but i don't know how to use when my unit was bricked. BTW thanks for your thread.
Manually Editing (More Safer)
For rooted Devices onlyIts totally Working on 530H-DV other devices ? U tell me
Here is some tips:
Install RootExplorer
Backup your build.prop located in root/system/build.prop
copy it to your computer
open your default build.prop with notepad++
Find this : " ro.pip.gated=0 "
as you see it s the last line . please copy these lines to it Just below the " ro.pip.gated=0 "
#ADD
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
#thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
pm.sleep_mode=1
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.performance.tuning=1
debug.egl.profiler=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=20
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=5
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
persist.audio.lowlatency.rec=false
audio.gapless.playback.disable=true
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
Minimum brightness of your screen
ro.lcd_min_brightness=2
# Saves some battery without reducing performances
proximity_incall=enable
usb_wakeup=enable
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
#For usb storage
ro.usb_host=1
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=c2d
# Hardware Acceleration Enabled
video.accelerate.hw=1
# Enable 16bit Transparency
persist.sys.use_16bpp_alpha=1
# Multi Users
fw.max_users=10
fw.show_multiuserui=1
#done
save it and replace it with the default one.
Remmeber to set the permission to rw-r-r (all reads checked all execute unchecked just the first
write checked) or set it to 0644 with RootExplorer (IF YOU DO NOT DO THAT YOUR DEVICE GONNA BRICK)
reboot . If anything goes wrong try to use your default build.prop that u've backed up
adblocker said:
Its totally Working on 530H-DV other devices ? U tell me
Here is some tips:
Backup your build.prop.
open your default build.prop with notepad++
Find this : " ro.pip.gated=0 "
as you see it s the last line . please copy these lines to it Just below the " ro.pip.gated=0 "
#ADD
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
#thereassaad TWEAKS
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Reduce dial-out time
ring.delay=0
# Other Tweaks:
ro.config.combined_signal=true
pm.sleep_mode=1
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Tether/Hotspot Tweak
ro.tether.denied=false
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
security.mdpp=None
security.mdpp.result=None
wlan.wfd.hdcp=disable
# Wireless Tweaks
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_wmem=4096 39000 18700
wifi.supplicant_scan_interval=220
net.ipv4.tcp_window_scaling=1
# Video Acceleration Enabled And HW debugging
video.accelerate.hw=1
debug.performance.tuning=1
debug.egl.profiler=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# 3G signal and speed tweaks
ro.ril.hsxpa=2
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=7
ro.ril.hsdpa.category=20
ro.ril.enable.a52=1
ro.ril.set.mtu1472=1
persist.data_netmgrd_mtu=1482
persist.data_netmgrd_nint=8
ro.ril.enable.dtm=1
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
ro.ril.enable.gea3=1
ro.ril.enable.fd.plmn.prefix=23402,23410,23411
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.enc.hprof.vid.fps=65
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# Better Telephony Settings
ro.config.vc_call_vol_steps=5
# Audio Tweaks
persist.audio.fluence.mode=endfire
persist.audio.hp=true
persist.audio.vr.enable=false
persist.audio.handset.mic=analog
persist.audio.lowlatency.rec=false
audio.gapless.playback.disable=true
# For SD storage insert notification sound
persist.service.mount.playsnd=0
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
Minimum brightness of your screen
ro.lcd_min_brightness=2
# Saves some battery without reducing performances
proximity_incall=enable
usb_wakeup=enable
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
#For usb storage
ro.usb_host=1
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
#done
save it and replace it with the default one.
Remmeber to set the permission to rw-r-r (all reads checked all execute unchecked just the first
write checked) or set it to 0644 with RootExplorer
and reboot . If anything goes wrong try to use your default setting
Click to expand...
Click to collapse
FINALLY MY PHONE STARTS AFTER EDITING MY BUILD.PROP.. as of now my unit is under observation for the changes. Thank you sir. :good::good:
deyene said:
Open your root explorer, open the system folder. and u will see build.prop
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
Thanks I'm just a bit noob of this build.prop and It took me 10mins to look for permission to rw-r-r that he's talking about...
anyways before I paste the file or the text... will It be compatible with my firmware because It's for G530HXCU1AOE2 and my phone is G530HXCU1AOA2... should I replace that name?
---------- Post added at 03:17 PM ---------- Previous post was at 03:03 PM ----------
My root browser is crushing after I save it to rw-r-r and I can't edit the text or paste the file... It's always failed
---------- Post added at 03:34 PM ---------- Previous post was at 03:17 PM ----------
My build.prop is now empty after I paste the modified build.prop but I don't find any problems... why is that?