Hi everyone.
i rooted my phone with this guide which installed a based CWM recovery on my phone with Siyah-s2-v6.0b4.tar using Odin.
Now i want to run a touch CWM recovery but no matter how i tried- no way worked and i always get the based CWM recovery again.
I tried ROM manager and RECOVERY tools but none of these actually worked (although i got success messages).
I also tried to download the recovery file from the official site of CWM, but when i tried to copy it to my sd card an error message popped out saying copy can't be done and the device is not connected or working or something.. i can copy other zip files without any problem.
can anyone help?
thanks.
1) Do not use Rom Manager with the SGS2. It will break recovery and/or cause bootloops eventually. It may even brick your phone. You don't need it.
2) Any recovery flashed independently of the kernel on the SGS2 will only persist until the next reboot, which is why what you're trying isn't working. If you want a touch version of CWM, flash/run a kernel which has this. Which kernels ? Read the kernel threads in the development section (I don't use PhilZ on my SGS2, but his comes to mind as I use it on my I9505).
heywebi
MistahBungle said:
1) Do not use Rom Manager with the SGS2. It will break recovery and/or cause bootloops eventually. It may even brick your phone. You don't need it.
2) Any recovery flashed independently of the kernel on the SGS2 will only persist until the next reboot, which is why what you're trying isn't working. If you want a touch version of CWM, flash/run a kernel which has this. Which kernels ? Read the kernel threads in the development section (I don't use PhilZ on my SGS2, but his comes to mind as I use it on my I9505).
Click to expand...
Click to collapse
thank you very much! i'm relieved i didn't brick my phone, that could have been a mess..
flashing kernels is like regular flashing? just installing the zip file? do i need to wipe any data or cache or something?
thanks for your response.
Follow the flashing instructions for the kernel in question to the letter (always on the first page of the kernel thread, always very clear/precise/easy to follow).
MistahBungle said:
.... I use it on my I9505).
Click to expand...
Click to collapse
In that case, great to still see you in the s2 forums
Sent from a galaxy far, far away
Related
Hey everyone,
First of all, i apologize if any of what i'm asking here is stuff that has been covered before. I have been searching myself for answers for the last several days and have found plenty of good info, but i am new to android and i think i need to ask some question to help get a base level understanding of what i need to do. I am a bit nervous about bricking my phone so i maybe haven't been as adventurous trying to get everything running as god intended.
Firstly, i have used and understand Odin, using it to flash roms and such. I have rooted the phone and installed ROM Manager and clockworkmod 4.0.1.5 on the phone, but when i boot into recovery mode, it is still on the android recovery 3e and i cannot do the update.zip, I get signature verification failed. Now i KNOW this is cause of the android recovery 3e, and i have found this issue has been encountered plenty before, but my confusion is in some of the solutions i have found. Mainly the terminology and how the steps directly apply to the phone. For example, I found on another forum thread :
1- Copy the Zimage from your rooted kernel and paste it to SD card of your phone.
2- Flash the Stock kernel via Odin to get rid of Yellow triangle.
3- Flash the Zip file (Zimage) via CWM which you've already pasted in Step 1.
i don't really understand what the zimage is. Why do i need it, what IS it frankly? Where do i get it or a stock kernel for my phone. Does versioning matter much? i read that for the most part the kernels are almost identical to each other, and the fact all i really need is for the android recovery mode to be 2e or whatever it is (so it will not do the signature check on the update.zip file), that i don't really need to pay much attention to the actual kernel version.
What i really need i guess is for someone to break it down for me and either explain the steps or give me a detailed step by step on how to get clockworkmod recovery working so i can proceed with the cyanogen mod running on phone (not enjoying touchwiz at all).
Again, sorry if i am giving anyone spasms at my noobish-ness, but i have been searching for my answers for a day or two now and i haven't been able to find anything that really tells me what i need to know.
Phone : GT-I9100M
Android : 2.3.3
Kernal : 2.6.35.7-I9100XWKDD-CL
Build : GINGERBREAD.UGKG2
Thanks
riccochet said:
Hey everyone,
clockworkmod 4.0.1.5 on the phone, but when i boot into recovery mode, it is still on the android recovery 3e
That means you have not installed it flash CWM and \Root from here .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Beware of following instructions from a separate rom to the one you are flashing .
1- Copy the Zimage from your rooted kernel and paste it to SD card of your phone.
2- Flash the Stock kernel via Odin to get rid of Yellow triangle.
3- Flash the Zip file (Zimage) via CWM which you've already pasted in Step 1.
i don't really understand what the zimage is.
ZImage is the kernel .
Why do i need it, what IS it frankly? Where do i get it or a stock kernel for my phone. Does versioning matter much? i read that for the most part the kernels are almost identical to each other, and the fact all i really need is for the android recovery mode to be 2e or whatever it is (so it will not do the signature check on the update.zip file), that i don't really need to pay much attention to the actual kernel version.
You are confusing yourself .
Flash correct CWM from above link .
Choose the custom rom and follow the instructions posted for that rom .
CyanogenMod as the man says
Warning : Not for new users, flash this build only if you know what you are doing !!!
#Followed by his install instructions ~~~
jje
Click to expand...
Click to collapse
Thanks for the reply. I have been doing more reading and i think i am understanding the rooting process a bit better.
I looked at the link you posted (thanks for that, i saw the forum post for the i9000 but i never could find the i9100 post for some reason) and i DO have another question after reading through a good chunk of the posts on it.
There is no CF Root for my kernel, but the reply that was made to someone else with my kernel version was :
"Flash the Stock 2.3.4 ROM (XXKG5, XXKG6 or XXKG7) and root with CF-Root-XXKG6."
I understand that process and how it works but i thought you were only supposed to flash roms based on your firmware version? My KDD kernel version is running on 2.3.3
Will this cause any issues if i flash the stock 2.3.4 ROM?
Download cm7 zip for the newest nightly.
Copy it to internal sd card.
Flash any cf root kernel
Boot into recovery
Wipe data and cache, you will lose all your data on your phone, so backup sms (I recommend sms backup +), also you will lose App data so you might want to back that up first using something like titanium backup.
Wipe dalvik cache (under advanced)
Chose install zip from sd card
Select the cm7 zip
Reboot
If you get stuck at the boot screen go back into recovery and flash the zip again
Sent from my GT-I9100 using XDA Premium App
Thanks Veyka.
I think i'm ok with the CM7 install process. I am probably going to wait until i really feel like i understand the whole process from front to back before i start messing with that though.
I can't get to that point yet however since i haven't been able to get CWM recovery working yet. I have the Android Recovery 3e, which will not install from zip files that aren't digitally signed.
So i'm trying to get CF Root installed and working, however, as mentioned in my previous post there is no CF Root for my kernel. I would like it clarified if it is ok for me to flash to a 2.3.4 stock ROM (i'm running 2.3.3) and then use a CF root for a the new ROM.
I was under the impression that this was not a good idea.
If i should not be doing this, is there a recommended way to upgrade my firmware to 2.3.4 so i can use a newer CF Root?
Thanks
Pick a new stock rom, I would go for kg6, flash it via odin.
Then flash the kg6 CF root kernel via odin and you will have cwm recovery.
Don't put the pit into odin and don't tick repartition or update bootloader.
There is a good thread with all the info you need on flashing stock roms with odin and a list of all avaliable roms.
Sent from my GT-I9100 using XDA Premium App
Thanks for all the help. I was able to make sense of the process (which is actually quite simple, just needed to put it all together in my head to make sense) and get everything done.
Appreciate all the help!
veyka said:
Download cm7 zip for the newest nightly.
Copy it to internal sd card.
Flash any cf root kernel
Boot into recovery
Wipe data and cache, you will lose all your data on your phone, so backup sms (I recommend sms backup +), also you will lose App data so you might want to back that up first using something like titanium backup.
Wipe dalvik cache (under advanced)
Chose install zip from sd card
Select the cm7 zip
Reboot
If you get stuck at the boot screen go back into recovery and flash the zip again
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Hi,
I have rooted my phone using the quick root guide found here and therefore I have my stock kernel back w/ root. Do I need to install a cf root kernel?
Also, when the new ROM gets flashed how does one recover the apps and data lost?
NABNAP said:
Hi,
I have rooted my phone using the quick root guide found here and therefore I have my stock kernel back w/ root. Do I need to install a cf root kernel?
Also, when the new ROM gets flashed how does one recover the apps and data lost?
Click to expand...
Click to collapse
Use Titanium Backup PRO for your app. You can backup all of them then restore on any rom.
Is there anything that Titanium Backup doesn't back up for which I need to use another application?
Thanks.
NABNAP said:
Is there anything that Titanium Backup doesn't back up for which I need to use another application?
Thanks.
Click to expand...
Click to collapse
sms.. use another app to backup your sms.. for example sms backup as mentioned before..
OK, I know this has been asked before but I can't actually find a working answer! Installed rom manager last night, didn't work I assume because of 3e recovery. Installed latest FW for SII and loaded CF-Root - still didn't work. Re-flashed (I assume that was OK?) with speedmod - still doesn't work. Is there a working solution to get rom manager working?
Sorry, I'm not an expert so it may well have been answered but I didn't understand the solution
IIRC Rom Manager needs CWM recovery.
So flash a kernel that contains the CWM recovery instead of the original (3e) one.
Like, for example, CF-Root (CF-Root doesn't work with Rom manager), my one (v sig v - but not sure if it works, never tried, would be cool if you could and tell me ) or the CWM kernel from the CWM-initramfs-template thread in the dev section.
//EDIT
a few corrections
It does indeed need CWM recovery. Installed CF-Root but as you say, it doesn't work. Also tried speedmod but that doesn't seem to do much either!
Now, if I flash with yours for example, can I literally just flash over what I have now? I did that this morning with CF->Speedmod and my phone has already crashed once. Or is there a correct way to re-flash, such as putting the phone back to stock first?
I **think** its working as your kernel allowed me to turn off image verification and so ROM Managers update.zip seemed to install OK. Backup started anyway.
So.... the phone rebooted after backup by itself, is that normal? And, I assumed the backup would be on the SD card - it appears to be on the phone though under \clockworkmod\backup\ - is that right? Is that everything on the phone backed up (apps, settings, layout)? Can I restore that if I trash the phone completely?
Edit: OK, don't think its worked. When I reboot its still trying to install update.zip and failing :-(
Yeah like other posters have said, you'll need to flash a CWM kernel. chainfires kernels have CWM so I'd guess you're not actually flashing the kernel..
m4rshall said:
Yeah like other posters have said, you'll need to flash a CWM kernel. chainfires kernels have CWM so I'd guess you're not actually flashing the kernel..
Click to expand...
Click to collapse
Its just finding a good one that works well!
rendez2k said:
Its just finding a good one that works well!
Click to expand...
Click to collapse
Any works>> well start with the last one if not working you are doing something wrong.
jje
JJEgan said:
Any works>> well start with the last one if not working you are doing something wrong.
jje
Click to expand...
Click to collapse
OK, put Hellcats kernel back on, didn't try and install any updates from Rom Manager and just got it to download a new rom. Rebooted phone and it instantly fails to install. Select install from zip, turn of verification and it worked!
Now, I see some features such as BLN support have now gone, I assume because the rom updated the kernel - can I now reflash the Hellcats kernal or could that screw the rom up?
To use rom manager flash this kernel
As it wont work with chainfires tweaked clockworkmod recovery in CF-root.
BLN is a kernel thing, if you want BLN use a BLN kernel, for example Ninphetamine (mysig) and use the CWM manager app you can find if you search the forum.
ROM manager will ONLY work with codeworx's kernel and that doesnt have BLN etc.
Thanks veyka - I'm a bit confused what Rom Manager is actually is doing (or needs to be able to do) now. Is it just trying to install a modified CWM?
As I say, using Hellcats kernel which has CWM built in already, I was able to use Rom Manager to download a new rom then manually install with CWM. So I'm not sure what Rom Manager 'working' would actually add to that?
And as per my question a few posts up, now I have a new rom installed (TK-Rom for now), can I happily change the kernel and have no issues?
Hello everybody,
First I'd like to thank to community for the hard work. I v read a countless amount of pages of this forum and I can't even imagine the time people spent helping on issues or writing tutorials.
So thank you if you re up to spend few minutes on my specific case (and sorry for the bad english).
Here is my device and the different version of kernel ...
1/ Rooting my device (tutorial in french translated from xda)
http://www.cnetfrance.fr/produits/guide-rooter-son-galaxy-s2-39763841.htm
S-Root version used: http://forum.xda-developers.com/showthread.php?t=1125414
Everything went pretty well when I rooted the GS2. I got the Superuser app so i figure it's ok.
I just used a modified kernel found on xda who was corresponding the my base band version (just the PDA in Odin).
2/ Installing a new ROM (Cyanogenmod by Rom Manager)
I followed : http://www.redmondpie.com/install-cm7-on-galaxy-s2-using-rom-manager-how-to-tutorial/ and http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_II:_Full_Update_Guide (official guide) using Rom Manager premium.
When i tried to reboot in Recovery (manually or with Rom Manager), i can't find the "Install the zip" option, I have 4 available: "Update from the zip", the 2 wiping/delete options and the reboot.
So obviously if i try to wipe files, wipe the cache then to update with the zip I have the following Error:
E: failed to verify whole-file signature
Do you have any idea what went wrong in the process ?
Should i flash the phone withOdin and change my base band version to another one ?
For info, I did the Permission Fix option in Rom Manager too. Didnt help.
Thanks a lot.
U need clockworkmod instaled first..
Sent from my GT-S5570 using xda premium
sgt_ray said:
Do you have any idea what went wrong in the process ?
Click to expand...
Click to collapse
You didn't install ClockworkMod Recovery.
Thanks for theses answers but I think I installed it with Rom Manager and i flashed it to the last version.
(joined file 1 : cwm rom manager.jpg)
When i reboot in recovery mode here is the only options available (and it's the problem i pointed out) :
(joined file 2 : 20111125_13221022.jpg)
Maybe a problem with my SD card ?
sgt_ray said:
but I think I installed it with Rom Manager and i flashed it to the last version.
Click to expand...
Click to collapse
As we've already said, you haven't installed CWM Recovery. You see at the top of your second photo where it says "Android system recovery (3e)"? That's stock recovery.
you can't install CWM recovery thru ROM manager.
just flash the CF Root Kernel for KI4 thru ODIN , you will have CWM recovery.
Hmm I understand about the CWM version I'm booting with, but as you can see on the first capture, my kernel version is a modified one i got after using Odin (puting this Kernel : GT-I9100_XXKI4_insecure.tar from http://forum.xda-developers.com/showthread.php?t=1101671).
I got the root access by S2 Root.
Ok I think I installed only the Kernel and not CF Root available here : http://forum.xda-developers.com/showthread.php?t=1103399
I ll try to redo Odin and stuff and let you know if I'm still alive.
So it's not great right now. I have installed CF Root with Odin, so I had CWM on my phone (I could see the application). Then after reboot with CWM Recovery and installing Cyanogenmod, the phone doesnt want to start anymore.....
I tried to apply the insecure kernel again with Odin but still impossible to download. I'm stuck on the screen with the yellow sign and written Galaxy S2.
HALP !!
I just tried to put back the official firware version : http://forum.xda-developers.com/showthread.php?t=1075278 and put it in my phone with Odin.
Ok, I dont have the yellow sign anywore but the phone is still stuck on the boot screen (where it's written Samsung GALAXY s II)...
What should I try ?
I'm still able to boot with CWM recovery but I didn't make any backup and nothing work.
Do you think the phone is dead ?
5 posts in a row?
So, just to clarify, you've tried to install CM7, which amongst other things tells you to do a nandroid backup, and also to flash twice in succession. Did you do either of these things? The instructions are there to be followed, don't just ignore them.
Ok my bad I didn't backup anything because I had no data to backup. This was maybe a bad move...
Anyway, I tried to flash it twice yes. Right now, i'm working with a modified Kernel (with CF Root), and booting in CWM Recovery. When I want to flash again by installing from the .zip I get a Satus 7 Error.
In CWM, every advanced options are apparently available but I dont know anything about them.
And just so you know, on my SD Card i have 1 update.zip and the update-cm-7.1.0-Galaxys2.... .zip from Cyanogen.
sgt_ray said:
Ok my bad I didn't backup anything because I had no data to backup. This was maybe a bad move...
Anyway, I tried to flash it twice yes. Right now, i'm working with a modified Kernel (with CF Root), and booting in CWM Recovery. When I want to flash again by installing from the .zip I get a Satus 7 Error.
In CWM, every advanced options are apparently available but I dont know anything about them.
And just so you know, on my SD Card i have 1 update.zip and the update-cm-7.1.0-Galaxys2.... .zip from Cyanogen.
Click to expand...
Click to collapse
Flash a stock rom with Odin and then root your phone again. Start reading and follow procedures when you want to flash custom roms again .See Intratechs`s thread for a stock rom
Thanks for your reply.
I did it, it didn't work, I mean i could flash with Odin but the reboot doesn't work : the start screen appeared without the yellow sign, but it's stuck on it.
--- update
FYI, I installed Rom Manager yesterday, it way interact in a bad way with CWM Recovery.
For now i can mount USB by CWM Recovery but cannot do anything else.
If you have a method to clean completely the phone ? Maybe the bootloader is broken...
sgt_ray said:
I just tried to put back the official firware version : http://forum.xda-developers.com/showthread.php?t=1075278 and put it in my phone with Odin.
Ok, I dont have the yellow sign anywore but the phone is still stuck on the boot screen (where it's written Samsung GALAXY s II)...
What should I try ?
I'm still able to boot with CWM recovery but I didn't make any backup and nothing work.
Click to expand...
Click to collapse
Wipe data and cache after flashing..
Sent from my GT-S5570 using xda premium
I did it. 20 times .
Maybe I should re partition my SD card...
--- update ---
I re partitionned my SD Card with Odin and tried to install a new stock ROM. Everything pass with Odin but to finalize the set up (while reboot), I got some errors and still the same problem during the boot. It's stuck !
I installed a insecure Kernel so I can access CWM Recovery but still stuck and now I can't mount anything .
Sorry to post again...
Finally I ordered a USB jig in case of...
I found this solution : http://forum.xda-developers.com/showpost.php?p=16902269&postcount=8
May try it this we.
sgt_ray said:
Sorry to post again...
Finally I ordered a USB jig in case of...
I found this solution : http://forum.xda-developers.com/showpost.php?p=16902269&postcount=8
May try it this we.
Click to expand...
Click to collapse
Good luck...
Sent from my GT-S5570 using xda premium
Hi All,
I have tried to find an answer to this question on XDA forum and tried to google it as well, but came up with nothing. So if it has been answered before, I apologize in advance.
I have rooted my i9100 using CF-ROOT. I was running XWLP8 so I used the corresponding rooted kernel and all is well. Currently I am using Resurrection Remix latest version.
No I want to have official clockworkmod touch recovery on my phone. I have installed ROM Manager and downloaded recovery-clockwork-touch-5.8.1.5-galaxys2.zip from clockworkmod website. I flashed it using CWM that came with CF-ROOT.
This is where things go wrong. After I flashed the new recovery and tried to reboot into recovery from ROM Manager, I got a blank screen. Tried to press some buttons but it gave me an intermittently flashing white screen, nothing else.
I tried to reboot normally again but it wouldn't do that either. I guess it was a soft brick.
So I had to flash CF-ROOT kernel using Odin, and then flash Resurrection Remix again. After that, things are ok. But now I am reluctant to try the new touch recovery.
So my question is, has anyone encountered this before? If so, is there a proven way to this?
Thanks for your help.
Rom manager doesn't work on S2.
Get the zip file and flash using cwm as normal and it will be updated to touch.
NOOOOOOOO DO NOTTTTTT use rom manager.
That thing is responsible for so much damage over the last 12 month, it sucks big time.
Look whats the issue here, if you have flashed cfroot kernel then you alread have a version of recovery on your phone which is no different to the official cwm recovery, get the same things, and you get the cwm app in ya app drawer, very very powerful little rom and kernel flashing tool indeed.
SO, what is it you really want, at a guess id say, you really want to the touch recovery, because the normal one isnt going to give you anything different to what you already have.
Goto the recovery site or use google to find it, download the latest version for your phone, stick it on the root of your sd card, reboot to cwm recovery that you already have, and choose to flash zip.
Done.
Thank you all, I will try this method as spoon as i manage and let you know. Thanks
Sent from my GT-I9100 using Tapatalk 2
Hello. I have galaxy S2, and I wanted to install CWM. I installed it (CWM-KitKatCompatible-i9100) with odin with auto reboot unchecked and after that it doesn't boot up. It can go to odin and CWM modes, but the android doesn't launch. I did a recovery to phone storage, but still I cant launch the phone... Can anyone help me?
Flash a compatible kernel to your installed rom via recovery. Or you can flash an insecure kernel via Odin.
Simple cwm flashing won't boot up your phone.
banjara said:
Flash a compatible kernel to your installed rom via recovery. Or you can flash an insecure kernel via Odin.
Simple cwm flashing won't boot up your phone.
Click to expand...
Click to collapse
Would you mind explaining how to flash a compatible kernel to my phone via recovery? Also I didn't install any rom just cwm. And where should I get a proper kernel to my android? Sorry for dumb questions, but I'm not experienced enough as you see...
V6xas said:
Would you mind explaining how to flash a compatible kernel to my phone via recovery? Also I didn't install any rom just cwm. And where should I get a proper kernel to my android? Sorry for dumb questions, but I'm not experienced enough as you see...
Click to expand...
Click to collapse
Well, there are 3 kernels which are quite popular here which have their depth range till kitkat roms.. A simple search on xda for them will lead you to the respective threads.
1. Gustavo's
2. Dorimanx
3. Apolo
If you want a KK rom then download a KK compatible kernel mentioned in the op for those threads, put that on external sdcard and boot to recovery. There you can flash the Kernel file. As you don't have a rom on your phone it would be better if you download a rom and gapps package too and flash them. After flashing a kernel, reboot to recovery and then flash rom and gapps.
If it's difficult for you to put those files on sdcard, you can flash a stock rom via Odin, flash a kernel e.g. philz, apolo,hirox via Odin. Search for these keywords here on xda. Once you have a working kernel and rom, you can download a custom rom and gapps, put it on your phone and follow the procedure which I mentioned first.
If my steps are still confusing to you then you require to search for these terminologies here on xda,read and understand them carefully and then proceed.
You didn't mention what OS/Firmware was on your phone before you started.....this is VERY important to know as it will decide what you can / cannot flash.....
Custom kernels are OS version dependent.....some will only work with ICS, others will only work with JB.....some are exclusively for KK.
You need to check this.....
My wife says I'm a phone geek....She's probably right
keithross39 said:
You didn't mention what OS/Firmware was on your phone before you started.....this is VERY important to know as it will decide what you can / cannot flash.....
Custom kernels are OS version dependent.....some will only work with ICS, others will only work with JB.....some are exclusively for KK.
You need to check this.....
My wife says I'm a phone geek....She's probably right
Click to expand...
Click to collapse
well I couldn't check cause it couldn't boot up, unless there's another way... But whatever I managed to write 4.4.2 Kitkat on my S2 and there's alot missing feature's like, I cant organise my program menu, I cant add many widgets that I had used in my previous android, there are no notes, phone file explorer and other what is irritating... Maybe there's some another pack that I missed when installing or what?