Phone screen won't turn on during boot - Motorola Droid RAZR

I unrooted to stock successfully and then tried to upgrade to verizon .16 and from .08 and I'm guessing that because the boot logo was changed when it was rooted and I didn't change it back that it didn't complete, and now boot animation won't show and screen won't turn on. What should I do? This is urgent
Sent from my HTC6500LVW using Tapatalk 4

SyrStorm said:
I unrooted to stock successfully and then tried to upgrade to verizon .16 and from .08 and I'm guessing that because the boot logo was changed when I was rooted and I didn't change it back that it didn't complete, and now boot animation won't show and screen won't turn on. What should I do? This is urgent
Sent from my HTC6500LVW using Tapatalk 4
Click to expand...
Click to collapse
Sent from my HTC6500LVW using Tapatalk 4

Fixed it myself anyway. Successfully RSD Lite-d my phone back to stock 4.1.2 and now all is good
Sent from my HTC6500LVW using Tapatalk 4

hello
here is a story behind bricking my xt910, so please read the question and give me a valuable reply.
today i rooted my phone and then i installed safestrap latest version and then create slot1 from recovery. i installed cm10 ( latest nightly ) and gapps and jbx karnel (latest nightly ) and rebooted in to cm10.After installing this my splash screen got changed to jbx ( in red colour ) and it was working fine and than after using it for an hour or two i deleted the slot one or cm10 and than selected the stock rom for reboot .
now the problem is my phone is not booting up , neither going into ap fastboot nothing even is coming on screen.
I know how to get into fastboot mode and have tried this method but no hope . so can ya please help me to fix my razr . can ya please give me any solution to fix it . i think its a hard brick done by me .
any feedback will be appreciable
thx alot

Related

[Q] my razr won't stop rebooting

Hi everyone
Before 2 weeks I got my Motorola razr XT910 then I root it everything was fine until I change the font on my razr then I didn't like it so I changed it back using Root manger after that it won't stop rebooting it will boot until the vibration on the boot screen then it will reboot again and again …….etc.
So I did a recovery restore (format) then it worked fine until I push the sleep button then it will reboot continually like before I tried everything .
Please your help..
Do you have Safestrap installed? Did you make a backup?
Sent from my DROID RAZR using xda premium
soltan4326 said:
Hi everyone
Before 2 weeks I got my Motorola razr XT910 then I root it everything was fine until I change the font on my razr then I didn't like it so I changed it back using Root manger after that it won't stop rebooting it will boot until the vibration on the boot screen then it will reboot again and again …….etc.
So I did a recovery restore (format) then it worked fine until I push the sleep button then it will reboot continually like before I tried everything .
Please your help..
Click to expand...
Click to collapse
Dude you can try flashing one of those official ROMs at the ROM thread in the development section. Please flash the correct version according to your region.
Thank you all for replaying.
Last night I remembered that I have used razr bootstrap so I restored my last pack up and everything is back to normal.

[Q] Cannot Restore to Stock 2.3.6

Dear All,
I am from Hong Kong, and got my asian Razr Maxx for almost 2 weeks now, I have found that I am unable to go back to stock by using motorola's stock factory reset option. Every time I first boot after I "restored" with my device, ADW Launcher EX will be its stock launcher ( i have installed it previously), and that my black multi-touch keyboard is gone. Also, my root would remain.
It just won't go back to how i unwrap it from the plastic wrappings. I tried flashing the asian stock rom though cwm, however it will say "installation aborted" when i tried installing the rom zip from sd card.
I really want to go back to stock, anyone have any idea how I should fix this?
Theresn't a stock firnware to your device?
Sent from my XT910 using Tapatalk 2
pedrotorresfilho said:
Theresn't a stock firnware to your device?
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
i think there is, i downloaded this file, it should be it http://forum.xda-developers.com/showthread.php?t=1441471
BlueEditionE6 said:
i think there is, i downloaded this file, it should be it http://forum.xda-developers.com/showthread.php?t=1441471
Click to expand...
Click to collapse
Yep. Just make sure you have full battery before flashing. Because razr battery isn't removable you may get it trouble if you don't follow this way. Good luck
Sent from my XT910 using Tapatalk 2
pedrotorresfilho said:
Yep. Just make sure you have full battery before flashing. Because razr battery isn't removable you may get it trouble if you don't follow this way. Good luck
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
I installed razrbootstrap, booted into cmw, selected the Asian rom, clicked install zip. But then it will end up as "Installation Aborted" . I wonder what I did wrong.
Sent from my MZ601 using xda premium
BlueEditionE6 said:
I installed razrbootstrap, booted into cmw, selected the Asian rom, clicked install zip. But then it will end up as "Installation Aborted" . I wonder what I did wrong.
Sent from my MZ601 using xda premium
Click to expand...
Click to collapse
But you have to flash it with rsd lite
Sent from my XT910 using Tapatalk 2
pedrotorresfilho said:
But you have to flash it with rsd lite
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
So I use rsd lite to flash the zip in? Cox I am not use to not using sbf files
Sent from my XT910 using xda premium
http://forum.xda-developers.com/showthread.php?p=23453478
Gesendet von meinem XT910 mit Tapatalk 2
pedrotorresfilho said:
But you have to flash it with rsd lite
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Thanks!
Sent from my MotoA953 using xda premium
glad i found this thread, i am in deep doodie with my phone. i just got my phone yesterday and had it rooted within the first hour of posession.
its the droid razr maxx, ut updated soon as i got home with it to 6.12.181.XT912, then rooted it on that version using the method from http://forum.xda-developers.com/showthread.php?t=1342567.
installed safestrap recovery
performed system backup before doing anything else
flashed eclipse
later realised that my battery wouldnt charge, so i tried to restore the backup of the stock rom........ and thats when everything went to hell!
tried to restore with safestrap in safe mode, no dice
took it out of safe mode, started getting restoration errors, tried to put it back into safemode, and it wont go back into safe mode,
now phone boots and stays stuck at moto logo dualcore technology screen
going to use rsd lite, but dont know what file to download for it because none of the ones provided in the stock rom section look even remotely close to what i need,
does anyone know where i can find and download 6.12.181.XT912.Verizon.en.US
or anything i can do to fix my phone? i cant even turn the damn thing off, when i get it to shut off, it just reboots itself all over again.
6stringandy said:
glad i found this thread, i am in deep doodie with my phone. i just got my phone yesterday and had it rooted within the first hour of posession.
its the droid razr maxx, ut updated soon as i got home with it to 6.12.181.XT912, then rooted it on that version using the method from http://forum.xda-developers.com/showthread.php?t=1342567.
installed safestrap recovery
performed system backup before doing anything else
flashed eclipse
later realised that my battery wouldnt charge, so i tried to restore the backup of the stock rom........ and thats when everything went to hell!
tried to restore with safestrap in safe mode, no dice
took it out of safe mode, started getting restoration errors, tried to put it back into safemode, and it wont go back into safe mode,
now phone boots and stays stuck at moto logo dualcore technology screen
going to use rsd lite, but dont know what file to download for it because none of the ones provided in the stock rom section look even remotely close to what i need,
does anyone know where i can find and download 6.12.181.XT912.Verizon.en.US
or anything i can do to fix my phone? i cant even turn the damn thing off, when i get it to shut off, it just reboots itself all over again.
Click to expand...
Click to collapse
you know how to boot into fastboot mode and flashboot mode right? I think your rom is in the following link
http://sbf.droid-developers.org/cdma_spyder/list.php
Force a shut down
Power+vol up+vol down till the screen blinks. Release power button and keep holding vol keys. It'll allow u go thru fastboot mode.
Sent from my XT910 using xda premium

Help! Tried to root after offical ics, now hanging at samsung loading screen.

My phone wont boot now.
It stays stuck at the 2nd Samsung during the boot up.
What happen was I updated today to offical ICS from my rooted gingerbread.
I updated via kias today to get official ICS, got it working and I noticed I didn't have cwm install anymore, so I followed this http://forum.xda-developers.com/showthread.php?t=1504218
It is pass it did it reboot thing, and never got past the 2nd "samsung" loading screen.
Anyone know how to get my phone booting again?
Flash the latest ICS kernel
I am not sure how to do that without cwm.
Before I updated to ICS when I press power + up down, it booted into CWM. Now when I do that I boots into Android System Recovery <3e>
EDIT: Good news.
Got CWM through installed though odin and then I restored to my gingerbread backup I made earlier.
Flash your roms via clockwork recovery mod from now on.
Drop the ROM .zip on sd card and then enter recovery. Wipe everything three times each then flash a uclf6 based ROM. Never touch Odin or kies again. Be happy. Ice cream sandwich is way better than ginger bread
Sent from my SAMSUNG-SGH-I717 using xda premium
Had the same exact problem. I "believe" the problem was that the CWM I flashed was perhaps incompatible with the official ICS?
I used Odin to flash cwm 5.5.0.4 as suggested and the fone was shut down with the hanging Samsung screen as you mentioned. I used the DL screen with Odin to the 600mb Team Objection ROM, which at least got me up and running again. I found out that CWM did in fact flash once the ROM was compatible with it. Updated CWM, then to finally get full stability, I had to do a factory reset after clearing both caches, then install the CM9 official.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Update: I installed official ICS again last night, looks like I lost my root and CWM.
I don't want to mess anything up again, so could you tell me exactly what CWM file you used to flash so it doesn't hang at samsung again?
I was having the same problems but I think I was doing it wrong. How are you flashing the root files? I upgraded from Kies, then used Odin to flash cwm touch (5.5.0.4 I think), make sure to let the reboot and that it's actually turned on and you can see your homescreen. Once you do that, THEN flash the superuser 3.0.7 in cwm. Let the phone reboot properly and it should be okay.
I was doing the same without the reboots and that's what caused me to hang at the logo, but after the above it worked well. Give it a try. For anyone who needs to flash the T-Mobile radios also let the phone reboot and then flash it because I was having issues with that which was fixed by letting the phone reboot.
Make nandroids at every step in case it does hang so you can just restore and try again instead of flashing everything all over again.
Sent from my SGH-I717R using xda app-developers app
I've also tried rooting my AT&T Galaxy Note I717 which had recently upgraded to ICS via AT&T/Kies and my phone is stuck at the Samsung boot screen. While I'm no expert with rooting phones, I had no problem rooting it when it had GB installed so I figured I wouldn't have any problems rooting it again. Is flashing the ICS kernel the best way to fix this? Where do I get the ICS kernel from and how do I flash it?
Details: After my phone upgraded to ICS 4.0.4 kernel 3.0.8 (IMM76D.UCLF6), I followed some instructions to root it using Odin3-v1.85 and PDA->pda.tar. Other instructions used cwm-touch-i717-120414.tar.md5 and odin_n1717_cwm_recovery_b4.tar and I tried those but to no avail. So I have CWM v5.5.0.4 installed but I don't know what to do next.
Any help is greatly appreciated. Thanks!
dcdtrax said:
I've also tried rooting my AT&T Galaxy Note I717 which had recently upgraded to ICS via AT&T/Kies and my phone is stuck at the Samsung boot screen. While I'm no expert with rooting phones, I had no problem rooting it when it had GB installed so I figured I wouldn't have any problems rooting it again. Is flashing the ICS kernel the best way to fix this? Where do I get the ICS kernel from and how do I flash it?
Details: After my phone upgraded to ICS 4.0.4 kernel 3.0.8 (IMM76D.UCLF6), I followed some instructions to root it using Odin3-v1.85 and PDA->pda.tar. Other instructions used cwm-touch-i717-120414.tar.md5 and odin_n1717_cwm_recovery_b4.tar and I tried those but to no avail. So I have CWM v5.5.0.4 installed but I don't know what to do next.
Any help is greatly appreciated. Thanks!
Click to expand...
Click to collapse
Update: I restored my phone back to a non-rooted working Android 4.0.4 by downloading the stock ROM for my phone (I717UCLF6_I717ATTLF6_I717UCLF6_HOME.tar.md5) and uploading it using Odin3-v1.85/PDA. I didn't even lose any of my settings or data. Now I need to figure out how to successfully root it. But at least I'm not worried about getting stuck on the Samsung screen anymore.
Open odin , PDA cwm file, Droid in dl mode, plug in start unplug, reboot, go to cwm recovery mode and backup onto sd card.
Im learning more, as i soft bricked mine last time
dcdtrax said:
Update: I restored my phone back to a non-rooted working Android 4.0.4 by downloading the stock ROM for my phone (I717UCLF6_I717ATTLF6_I717UCLF6_HOME.tar.md5) and uploading it using Odin3-v1.85/PDA. I didn't even lose any of my settings or data. Now I need to figure out how to successfully root it. But at least I'm not worried about getting stuck on the Samsung screen anymore.
Click to expand...
Click to collapse
Odin....to get touch cwm, then download the super user zip and flash it, you will have root....
All can be found in "My links" see it in red...go to GNote page....
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
what about su binaries
Can i put both on my sd card and put it in my phone, cmw recovery and install from there?
liftedzuki said:
what about su binaries
Can i put both on my sd card and put it in my phone, cmw recovery and install from there?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1740367
ok look for the green arrow...and use those threads....to root...k
odin for touch cwm
flash super user
your rooted
You realize the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Rooted.
erad1 said:
You realize you the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
so correct...you nailed it...so many are trying to root with gb kernal....
I hope they go to the page I made and follow the green arrowed how to root ics...it is very super simple process to root the official ics...but ....
This happened to me after misreading a comment.
If you put your phone into download mode, plug it in, run kies, and do an emergency firmware recovery. You'll need the serial number. My phone is stock ICS again. Works fine.
erad1 said:
You realize the reason you were stuck was because you flashed a GB kernel onto an ICS system? It would never boot. As the second post suggested... all you had to do was flash an ICS kernel to get it to boot.
Sent from my Amazon Kindle Fire using xda premium
Sent from my Amazon Kindle Fire using xda premium
Click to expand...
Click to collapse
so cwm 5.5.0.4 touch is a GB kernel? Because that's all I flashed after the KIES update to ICS and I got the hanging Samsung logo.
I believe some people are trying to get ICS rooted with this cwm and are getting stuck. Of course there are ways out of it, but it'll help the learning process if we can find the problem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
romeojunior said:
so cwm 5.5.0.4 touch is a GB kernel? Because that's all I flashed after the KIES update to ICS and I got the hanging Samsung logo.
I believe some people are trying to get ICS rooted with this cwm and are getting stuck. Of course there are ways out of it, but it'll help the learning process if we can find the problem.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Wait what??!!??!!
you need to read read read read and PLEASE read
Because CMW is not a kernel
Its a recovery
People wouldn't have these issues if they read.
Please refer to the stickies before you really damage your phone.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
The OP had posted that he flashed Da_g's GB kernel trying to get root...your issue if flashing CWM may be different. Hopefully you use the steps outlined by bigjoe in his post.
Sent from my SAMSUNG-SGH-I717 using xda premium

OTA JB and Safestrap 3.11 problem

I recently performed the steps to update my RAZR MAXX (XT-912 CDMA) to the OTA JB update. I had no issues. I obtained Root privileges and installed the most recent version of Safestrap for my phone (3.11). No problems detected. I then booted into Safestrap recovery and created a new ROM slot. Installed Jellycore V1.5 to it as well as Gapps. Booted to that slot and NOTHING. The screen just goes black after the Safestrap screen. So I booted back into Safestrap recovery and tried to restore my backup to that slot...same result. When the phone is rebooted, it goes to the Safestrap screen where you can select continue or recovery. If I continue (by selection or waiting the 10 seconds) the screen just goes black. I left it that way overnight thinking it might take a while but no. I've tried reinstalling Safestrap, different ROMS, and reinstalling ROMS. Any ideas? Because I need my AOKP.
Sent from my DROID RAZR MAXX using xda app-developers app
Update...
I can get ROM slot one to successfully install and boot motoblur-98.72.8-XT912.zip.
I cannot get it to boot jellycore v1.5 or CNA v1 or any other non stock ROM. What is going on. Tried Safestrap 3.11 and 3.05.
My DROID RAZR MAXX sent this on its own.
What slot are you using
Sent from my Motorola Galaxy s3 using xda premium
Trying to install to ROM slot 1. I had this same setup running fine (Jellycore as my daily driver) and never had any problems installing ROMs on Safestrap until I did the Stock update to JB.
My DROID RAZR MAXX sent this on its own.
I figured it out. When I updated to JB, it updated the kernel as well. I put the new AOKP JB ROM on and no problems. Oversight on my part.
My DROID RAZR MAXX sent this on its own.
bear with me....
awedel said:
I figured it out. When I updated to JB, it updated the kernel as well. I put the new AOKP JB ROM on and no problems. Oversight on my part.
My DROID RAZR MAXX sent this on its own.
Click to expand...
Click to collapse
bear with me, i am new to rooting the razr maxx ... i have rooted an htc thunderbolt, 3 gNexs, 2 nexus 7, and 2 galaxy s3s but i am havingw trouble with problem very similar to yours... but with a twist, i cant seem to remember all the the steps i took to produce this problem, as i was rooting my buddies razr maxx over super bowl weeekend and havent picked it up since ..... til now ... but anyways .. i did obtain root and had safestrap 3.11 installed... ok for starters the phone for one will not power on at all unless i plug it into a charger ... and when i do that i see the dual core screen and then it brings up the safestrap diabled screen and gives the option to press the menu button to reboot into recover or press the search button (or wait 10 seconds) to continue... when i press the menu button it goes to the black screen like u said ... when i wait 10 seconds it goes to the black screen and when i press the search button it goes to the black screen ... and then i end up having to use the volume down and power button to power it off (or if i unplug the charger it also powers off) ... when i plug it in again it automattically turns on and goes to the dual core screen and starts the process over ... i am however still able to get in to the boot menu ... and i tried to go into recovery mode that way and now the screen is stuck on the dual core screen with it plugged into the wall charger.... im thinking i have multiple issues ... one battery issue and i must have went wrong somehwere trying to flash a rom ...but wnho knows .. not me lol .... please please help ... we can do a google hangout and try to resolve this issue if you are willling ..... thanks in advance
Try taking it back to stock and starting over. Might be your best bet.
My DROID RAZR MAXX sent this on its own.
Yes go back to original
Sent from my SCH-I535 using Tapatalk 2
same issue here
awedel said:
Try taking it back to stock and starting over. Might be your best bet.
My DROID RAZR MAXX sent this on its own.
Click to expand...
Click to collapse
I am also having the issues mentioned in this forum. I rooted the razr maxx, then installed ss 3.11. I tried installing Jellywiz, and cm10.1 and neither worked. I did install the Vzn JB update for my phone before rooting it. Now the phone just does the boot loop and black screen thing. Any ideas?
if you boot to a blank screen and it stays there more than a minute or so after the kexec vibrate, you need to reboot to SafeStrap - switch to stock and boot it (optionally uninstall and reinstall recovery from the SafeStrap app). Then reboot and select your ROM slot and it should boot fine.
Sent from my XT910 using xda app-developers app
how can i revert back to the original stock kernel?
natjeff1988 said:
I am also having the issues mentioned in this forum. I rooted the razr maxx, then installed ss 3.11. I tried installing Jellywiz, and cm10.1 and neither worked. I did install the Vzn JB update for my phone before rooting it. Now the phone just does the boot loop and black screen thing. Any ideas?
Click to expand...
Click to collapse
Are you wiping cache, dalvik, system, and factory reset after you create the rom slot? I had issues with a few ROMs until I wiped everything before installing a rom to a new slot. Also, you can run into this if you are trying to install a ROM into a ROM slot that had a different ROM installed on it previously. If that is the case just delete the slot and recreate it. (Oh and make sure it is not the stock rom slot that you are deleting, that would not be good) One last thing, some ROMs only work on ROM slot 1.
---------- Post added at 10:05 AM ---------- Previous post was at 09:45 AM ----------
curseshadow said:
how can i revert back to the original stock kernel?
Click to expand...
Click to collapse
If you have safestrap installed then your stock ROM is already preserved. Are you trying to revert back to a previous kernel before the JB update?
vnom2112 said:
If you have safestrap installed then your stock ROM is already preserved. Are you trying to revert back to a previous kernel before the JB update?
Click to expand...
Click to collapse
yes, i'm using JB right now and i try to flash ICS rom using safestrap and seems like the flash is successful but when i wanna boot the ICS.. the screen just blank..
curseshadow said:
yes, i'm using JB right now and i try to flash ICS rom using safestrap and seems like the flash is successful but when i wanna boot the ICS.. the screen just blank..
Click to expand...
Click to collapse
You can't go back or flash to ICS ROMs when you're on jellybean man!!!
Sent from my GT-I9300 using xda app-developers app
TheMrcool212 said:
You can't go back or flash to ICS ROMs when you're on jellybean man!!!
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yeah.. i just realized that.. now i need to try other jellybean rom that's stable for my phone..

Lighting does strike twice

Accidentally flash a I727 jb Rom on my note twice .I can do a nandroid but no sound and its stuck on home screen can't open any app. Is there anyway of resolving this issue.I try to install the new in jb Rom but get stuck and Samsung logo.anyone one made this stupid mistakes or I'm alone on this one.or Do I have to Odin back to stock?
Edit.Odin back to stock still froze on home screen .anyone have any idea's ?thank in advance.
Sent from my HTC Inspire 4G using xda app-developers app
Reedit.did system wipe and odin 10 times in a row phone working now.thanks to those that look but can't help and thank to those who don't really care.
I had kinda the same problem as you flashed some bad gapps messed my phone up. Had access to twrp would flash roms only to have them reboot. Had access to D.L mode odined stock and samething would happen would not boot. Booted into stock recovery wipe partitions and dalvik and rebooted it worked hope that helps anybody.
Sent from my SAMSUNG-SGH-I717 using xda premium

Categories

Resources