[Q] Wolfbreak 7 loses slide to unlock - XPERIA X10 Q&A, Help & Troubleshooting

Hello everyone,
I searched for a similar topic but I could not find it. If there is a topic like that I would appreciate if somebody could transfer this to the correct place.
I have an Xperia X10 with Wolfbreak 7 Stock (2.3.3) installed and from time to time I am experiencing the same problem. My wife, with the same hardware and software has the same:
The phone, after some time working perfectly, suddenly loses the screen lock and the options “silence mode” and “plane mode” when the start button is pressed and held (only “shutdown” and “restart” are available).
The only way I found to correct that is the factory reset. The problem is I have to configure my accounts again and reinstall all the downloadable apps I use.
Can anybody help me? Is there any correction I could install on my phone or could I use a recovery function to make this process easier?
Thank you in advance.

Related

[Q] how to test touchscreen with adb

Hello, all ROM makers, developers, hackers and advanced users.
I have a problem and hope you can give me some good advice.
Here is my sad story
You can read the full description if you want. Or you can skip it - the main question in the end of this post..
I have bought a new Sony ericsson Live! with walkman (wt19i) phone during my newyear holydays in Prague. It seemd to be working fine.
It is from rev.3, manufacture date 11/49 (mounth/week)
When I came back home and started using it, I saw that after some inactivity period (about couple hours or maybe more) the touch screen, back and menu snsor buttons stops any responsing. Hardware buttons (home, volume, camera, walkman and power) are still working. The system also continues to work as usual, so I can turn it on (but can not slide to unlock), I can hear if somebody calls me (but can not answer). Alarms, notifications and all another functions are still working.
Once or twise it started to work again (by itself, without any actions by me) but after few time the problem repeated. I was very unhappy and sure it was a hardware problem (and of course the Czech warranty does not work in Russia), but now i'm not so sure.
The phone had 4.0.2.A.0.58 firmware (android 2.3.4) from the box. First of all I tried to install SE PC Companion software, connect phone with usb and make factory reset... touchscreen started to work! But soon I saw this problem again.
The next day a new update was released and installed it (firmware .62). My phone was working again, but with the same result after some time.
You shoud know, that simple softreset (or ejecting and inserting battery) has absolutesy no effect on problem. After system starts I can not even unlock it. But flashing a new (or even the same) firmware (with flash tool or SE PCC) makes touchscreen and buttons working for some time. Have no idea why, but installing ROM with CWM (even with full wipe) does not make touch working.
Then I tried to use another custom kernels and ROMs. I unlocked the bootloader with fastboot tool, flashed one of custom ROMs from this forum (pre-rooted and with CWM). Then tried to use CM7.2 ROM... then another kernel and another ROM. Official, official-based, totally unofficial. The problem was with me each time after couple hours
I thought it is because some troubles in lock screen. Tried to install "no lock" app, so my phone did not use lock... but after some time touch freezes in home screen.
I disabled screen off while charging in settings and tried to leave the phone "wired" for some time... actually it worked fine all the time, and when I dicsonnected it it was still working... for couple hours.
I tried to install "no sleep" applications that does not allow CPU and screen to suspend. But it have no influense.
I even flashed CM9.0 ICS (very) beta ROM with the same result.
If it is just hardware problem - why it solves (for some time, but solves) with flashing? If it is a software problem - why it doesnt solve with new kernels and ROMs? My brain is ready to explode.
Now I have only one last idea and ask you to help me.
The question is:
How can I use adb or adb shell comands to get more information about the problem with touch?
I saw there is some log (logcat, stderr) tools, debug tools. I saw working lsmod, dmesg and mount commands in shell.
I think I shoud get all this information when all is ok. And then get it again when touch stops working and then compare, is it a good idea?
Where exactly shoud I see? How to test or get some touch input device info with adb? Is there any item in /dev that i can explore? Or something in dmesg? Where are touch driver located and how can I check if it is working?
I have some basic linux and andriond skills, but have not enought expierence.
I very (VERY) hope somebody can give me any useful advice to continue solving the problem. Where to see, what to do?
Thank you
P.S.: and sorry for mistakes, of course. English is not my native language.
P.P.S.: i am not sure where is the best place for this question: here or in xperia subforums. But I decided that this question is not xperia-specific and can be useful for other people in future.
Anybody? I have Lenovo Yoga B6000 with touchscreen problem and will be good if anyone know how can i test TS through ADB or shell.

[Q] Need an Experts help

Help!
I have a unlocked AT&T Motorola Backflip (I know its old) and have been trying to install Android 2.3.7 CyanogenMod7. I go through making a recovery image and use Superuser to do a Wipe All. I then flash from the SDcard the zipped file. Everything appears to work fine. After the reboot the phone comes up in the Home page where I can see the apps ect. The issue is that when the phone goes to sleep or restarts I am at the initial power up screen ( where you would select phone, home or return). It is at this point that the home button fails to do anything. I get a short vibration indicating that the phone recognizes I have pushed the button but nothing else happens. When I restore the recovery image everything works fine.
It appears that the link between the home button and the location of the home page is missing.
I would really appreciate expert advice on how to proceed.
Thanks
Ram
CyanogenMod 7.1 mapping
Thanks for the information. If I may pose a follow-up. Based on my description, do you think there is different mapping with Android 2.1.1 and Andriod 2.3.7?
Also, is there a way to tell what mapping is being used in Android 2.3.7 or CyanogenMod7?
I appreciate you help.

[Q] need help

Hello sir. I am in a big trauble with my samsung galaxy E120 k. It is rooted and running in cwm recovery. As it is a korian phone there are a few number of custom rom i found but non of them fully stable and 100% bug free. So i am running with stock rom with variety of customization by xposed module. But suddenly yesterday my lockscreen has vaniahed!! Not only this, in addition with this in every boot bluetooth automatically goes on and screen time out seted at 10 minute and most serious peoblem is powwr menu also vanished , holding power button leads to switch off directly instead of appear power menu where reboot, user profile, shutdown are suppose to listed. I can not solve this even after fully wiped data, reset factory setting and restored previously backuped stock rom. Nothing works. I tried every possible way i known. I searched google a huge bt got nothing.
Now plz plz plz anyone help how can i get rid of these problem. It is very urgent coz i im gonna sell this **** after resolve the problem. Plz anyone help me. I will be very very greatful to u. Thanks in advance and sorry for my bad english.

Wikipad 7 Stuck in Setup Wizard Loop (More Info In Thread).

I have recently purchased a Wikipad 7 tablet and have been using it for a few weeks. I rooted the tablet using KingoRoot and the root was successful. Using a app included with the root called Superuser I deleted some system files I considered safe to do so in order to speed up the tablet and free up some space and the tablet worked fine after doing so. A couple of days later, I decided to perform a factory reset in order to get rid of multiple large files I had downloaded but could not have the effort to find. The reset went as normal until I tried connecting to wifi in the setup wizard. A screen showing 'Connecting to wifi' appears for some time before the message 'Unfortunately, Setup Wizard has stopped.' appears and I'm taken back the first screen where I have to choose my language. I have tried multiple times to connect to wifi successfully but to no avail. I have tried things such as turning off the router in order to bypass the process but the screen that appears after skipping wifi configuration (the one which asks permission to let google access your location) shows the same message after tapping on the left or right arrows located at the bottom to let me proceed through the setup or go back.
I have tried to search the internet for a solution to this problem, but the solutions were unexpectedly complicated for me to get around as I not understand some of the terminology used and the steps to fixing the problem seem to be specifically for one kind of device.
If anybody could have any knowledge on how to solve this problem then help would be greatly appreciated. It would be preferable if the method to fixing this problem would be as simple as possible to perform and understand. If you would like any additional information regarding the tablet in order to help with solving the problem, please to not hesitate to ask as I will provide all I can.
Yet again, any kind of help would be greatly appreciated!

Huawei u8110 specific question

Hello everybody!
I need assisstance from you all. I have an old mobile phone, Huawei U8110, and it is my only phone that I can use for now (long story short - lack of resources left me with this phone only, and I need to fix it, but I have some issues with the software).
I've updated the phone software from eclaire to cyanogen mod 7, android version 2.3.5., the mod version is CyanogenMod 7.1.0.-2.3.5.-U8110-COCO, build number COCO CM7.
But now it cant start in safe mode (the startup sceen that you can usually activate with button combination, where you can select boot options is always unavailable).
Phone is working somewhat ok (i cant use any radio, and my camera is dead), but the basic functions are running ok.
The thing is that I cant revert to any old system, and I cant update to a new one.
Is there any new system that is worth upgrading to, and is there a solution for the problem of accesing the startup sceen (that was available before, but now it isnt).
Thank you in advance for your answers, and I am sorry if I posted in a bad place in this forum.
My neighbor allowed me to use his Internet connection in order to post whis question, so I didnt had the time to search all the forums (sorry if I am not following the rules about that )
people? anybody? Some help, please?

Categories

Resources