ODIN3 FAILED All threads completed. (succeed 0 / failed 1) - Android Q&A, Help & Troubleshooting

So basically i went into Download Mode, USB Debugging Enabled it was a ***** to get the computer to recognize it but once it did, and everything was working i got this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Following this tut:
How to Root The AT&T Galaxy S3 (From The Sprint Forums)
i have a Galaxy s3 AT&T but unlocked and using it with T-Mobile
First time rooting, please be gentle

Related

[Q] Galaxy S2 Odin Not Working

i had ICS installed in my Galaxy S2 by myself using Odin.
I tried to install Jelly bean , but failed and now its in Downloading mode. i dont know what to do know. i tired to install Ginger bread still stuck. i even dont know which stock rom i need. and where i can download it from ??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWKJ3_I9100XENKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried another firmware
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLA4_I9100XXKI4_I9100EPLKL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
its in download mode which show on top left
ODIN MODE
PRODUCT NAME: GT-I9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
so worried...
i dont know nothing about it.
Please can someone tell me what to do ??
Thanks

Two days no help ?? where are developers ??

i have posted this thread twice. but no reply : ((
i had ICS installed in my Galaxy S2 by myself using Odin.
I tried to install Jelly bean , but failed and now its in Downloading mode. i dont know what to do know. i tired to install Ginger bread still stuck. i even dont know which stock rom i need. and where i can download it from ??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWKJ3_I9100XENKJ1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried another firmware
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLA4_I9100XXKI4_I9100EPLKL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
its in download mode which show on top left
ODIN MODE
PRODUCT NAME: GT-I9100
CUSTOM BINARY DOWNLOAD: YES (1 COUNTS)
CURRENT BINARY: SAMSUNG OFFICIAL
so worried...
i dont know nothing about it.
Please can someone tell me what to do ??
Thanks

odin flashing help

My phone has been softbricked(stuck on samsung logo) and the recovery mode has been blocked by frp lock.
My questions are: is the stock rom the model no(SM-J700M) and Country(TTT) firmware and if so when I flash on Odin, I get
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Have you tried just flashing the stock firmware with Odin?? That usually fixes that problem. If not try bypassing FRP.

PLEASE HELP! Trying to flash my Verizon Note 8 SM-N950U to T-Mobile firmware

Hey all,
Long story short is my VZW SM-N950U Note 8 is not working well on T-Mobile because it still has VZW firmware. I downloaded Odin 3.07 and 3.12 and used samfirm to get the TMO firmware. I've attempted to DL multiple times and it fails. Is there something else I have to do, or is it just not possible to do? Also it never gets a loading bar or anything, just fails or stick on setup connection.
Thanks in advance below is the cut n paste of the log from odin 3.12
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> userdata.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!

'Fingerprint protection failed' how do i fix this

hey guys I'm need of some assistance, i tried to root my samsung A21s using odin after operation was done and exited download mode my phone keeps looping at bootloader and displaying with red on the left top corner 'fingerprint protection failed'.
i tried installing firmware but no change so far Please anyone who can Help?
hey guys,
I kind of got the same problem with my Samsung Galaxy A40.
It started last summer but was a little different back then.
As I restarted my phone my phone got stuck into a bootloop and on the top left there was written in red letters: could not do normal boot.
Until this day I kept researching what actually was the problem and how to fix it.
My solution turned out to be flashing the stock firmware on my device again.
But after some tries my frp lock turned "off" and I wasn´t longer in download mode, more like a cyan background and some data on the top left.
Odin showed me this text:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> omr.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 6038 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> omr.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 6038 M
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> omr.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 6038 M
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyone who could tell me what my oppurtinities right now are, I will accept anything that lets my phone work again. So I I`m open to flash any Custom or Stock ROM onto my deviceif they can fix my problem.
Thank you and have a lovely afternoon
Ramgalaxy said:
hey guys,
I kind of got the same problem with my Samsung Galaxy A40.
It started last summer but was a little different back then.
As I restarted my phone my phone got stuck into a bootloop and on the top left there was written in red letters: could not do normal boot.
Until this day I kept researching what actually was the problem and how to fix it.
My solution turned out to be flashing the stock firmware on my device again.
But after some tries my frp lock turned "off" and I wasn´t longer in download mode, more like a cyan background and some data on the top left.
Odin showed me this text:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> omr.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 6038 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> omr.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 6038 M
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> param.bin
<ID:0/003> userdata.img
<ID:0/003> omr.img
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 6038 M
<ID:0/003> SetupConnection..
<ID:0/003> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyone who could tell me what my oppurtinities right now are, I will accept anything that lets my phone work again. So I I`m open to flash any Custom or Stock ROM onto my deviceif they can fix my problem.
Thank you and have a lovely afternoon
Click to expand...
Click to collapse
@Ramgalaxy is it possible for you to access your Recovery and is there a Red notification the top right?
kym605 said:
@Ramgalaxy is it possible for you to access your Recovery and is there a Red notification the top right?
Click to expand...
Click to collapse
top left i mean

Categories

Resources