[Q] Odin stuck at setup connection - Android Q&A, Help & Troubleshooting

Because there is no forum for the SGH-T589R (Samsung gravity Q). I have to post here.
I've been trying to flash back to stock rom ever since I rooted my phone. I've used Odin 1.85 and Odin multi downloader but they all get stuck! Odin 1.85 gets stuck at setup connection...I've searched everywhere they all say, try a different computer, try a different usb port, try a different cord, try re-installing the drivers, close kies, run as administrator, uncheck protect ops, I've even tried this: http://forum.xda-developers.com/showthread.php?p=36293397 . The only progress I've ever gotten is Odin multidownloader getting stuck on amss download then boot.img download. Is my phone ruined or is there still a chance to fix it? I am in download mode as I can't get into recovery mode and it says in yellow text "Downloading..."

pixelm said:
Because there is no forum for the SGH-T589R (Samsung gravity Q). I have to post here.
I've been trying to flash back to stock rom ever since I rooted my phone. I've used Odin 1.85 and Odin multi downloader but they all get stuck! Odin 1.85 gets stuck at setup connection...I've searched everywhere they all say, try a different computer, try a different usb port, try a different cord, try re-installing the drivers, close kies, run as administrator, uncheck protect ops, I've even tried this: http://forum.xda-developers.com/showthread.php?p=36293397 . The only progress I've ever gotten is Odin multidownloader getting stuck on amss download then boot.img download. Is my phone ruined or is there still a chance to fix it? I am in download mode as I can't get into recovery mode and it says in yellow text "Downloading..."
Click to expand...
Click to collapse
I don't know if you have found a solution or not, but because I have the same phone I'm suggesting you try Odin 4.40
I was looking for stock rom for SGH-T589W but unfortunately I couldn't!

Related

[Q] Help me restore to stock settings

I have a little problem and could use some help. I was running superclean 2.9.2 and attempted to switch over to the community rom. Before flashing the rom I downloaded the stock CI500_VZW_DL09_ECLAIR.tar.md5 file and attempted to load that with Odin(yes i chose pda). I have used Odin multiple times in the past w/out issues. Well this time my screen went blank on the Odin was stuck on param.lfs. When i disconnected my phone it now boots to the screen with a phone, exclamation point and a computer. I closed Odin restarted my computer and tried again with the same result. I can still access the download mode and CWM. When I try to complete a nandroid restore the phone goes through the whole process and then when I click to reboot I get the same screen as above. My next step was to download DI01package3.tar.md5. I tried pushing this with Odin and it got stuck on sbl.bin. Please help me get my phone back.
As you have unfortunately discovered, Odin is unreliable. Try to use Heimdall by following the instructions in this thread.
Im in the process but when I select the USB drop down menu all I see is unknown device, I do not see SAMSUNG android composite ADB device, or Samsung composite usb driver.
Could be your download was corrupted...?
Sent from my SCH-I500 using XDA Premium App
I followed the Heimdall thread but I can not get it to work as published. I downloaded all the files and was able to install the Samsung composite usb driver and then launched heimdall-frontend and I can check the box and use the pit file I installed, but the tar.md5 files are not extractable so I dont know what values to put in the boxes.
OK i figured out how to extract the .tar contents and filled them in the appropriate section of frontend and i hit start, which is soon followed by failed to retrieve config descriptor any more suggestions?...WEll I kept on entering download mode and reloading the values for frontend and finally it worked. Thanks for the help, greatly appreciated! No its time to try to get the community rom loaded.

HELP!

I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
leo13aug79 said:
I might have accidentally bricked my SGS 2. I get a screen saying:
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
with a mobile phone and a computer logo with a Yellow triangle in between.
I know abt Rooting and ROM flashing etc and has been doing it for the last couple or years.
I flashed Franklin's XXKG3 Kernels, and before I could flash Chainfire's XXKG3 kernel, the USB ports refused to recognize my handset. I can still go into download mode but the Odin or Samsung Kies etc. won't do nothing.
Keeps saying "USB Device not recognized"
Please help!!!!
Click to expand...
Click to collapse
Might help to reinstall KIES or try another computer.
Keeps saying "USB Device not recognized"
USB drivers problem remove Kies totally and reinstall .
Connect in mass storage mode and let windows find drivers .
That fails its broken phone .
jje
you broke your phone.
buy another SGS II
You can always try using a USB JIG to put the phone in download mode.
leo13aug79 said:
Keeps saying "USB Device not recognized"
Click to expand...
Click to collapse
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
"firmware upgrade encountered an issue. Please select recovery mode in kies and try again"
Click to expand...
Click to collapse
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
OMG! It's WORKING!
Thanks a lot to you all guys for the co-operation....
So, what did I do???? I uninstalled Kies and re-installed a couple of times but it won't access it. Tried Odin in all possible ways, No success. While playing and after ordering a "Jig" from some1 in USA,
I thought of something else and while the phone still being connected with the pc, I ran SuperOneClick, but it went on saying waiting for the device,.... I accidentally or in frustration hit the "HOME" button and it started doing something, USB drivers and Modem drivers installed on PC. Then I started Odin and the port went "Yellow". And I flashed it with the XXKG3.....
OMG! I'm so much relieved!!!!!!!! thanks God
thank you all too
Love your SGS2 and love God! Bless you all!
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
I love you man! You saved my phone and me!
So what have we learnt today? Don't go screaming "brick!" everytime you encounter a problem
I had a same issue yellow triangle between Phone and PC symbol...
followed this step .. http://forum.xda-developers.com/showthread.php?t=1274337
just did like this on very first step to get into odin mode hold vol down and power for longer then usual to get into odin mode and by pass that yellow triangle between Phone and PC screen and then follow rest of it same and easy as right clicking on desktop LOL!
From my experience, only true brick I encountered was when I messed with boot loaders. If the screen shows anything at all, Odin will recognize it. Glad to hear it's fixed
Sent from my GT-I9100 using XDA App
Odia said:
Uninstall the Samsung USB Driver from Control Panel
START/Control Panel/Programs and Features
Select "SAMSUNG USB Driver for Mobile Phones" and then uninstall
reboot your PC and then re-install the Samsung USB Driver from:-
C:\Program Files\Samsung\Kies\USB Driver
and run "SAMSUNG_USB_Driver_for_Mobile_Phones.exe"
Doing that will make sure there is no USB driver corruption.
Click to expand...
Click to collapse
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Can you get into download mode? If yes then reflash stock firmware using Odin
Sent from my GT-I9100 using Tapatalk
A bricked phone is a phone which will not respond. It maybe a soft brick or hard.
If you can get into download or recovery all you have to do is reflash. Wipe data & Cache. You will be up and running. If your phone is not recognised by your computer then reinstall kies.
Sent from my GT-I9100
Yep. Infuse Q&A (You're in the wrong section).
anjimgo said:
I´d tried to upgrade my Infuse SGH-i997 (AT&T) but I did something wrong and now the cell phone no work.
When it turn on says:
"firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
The computer recognize the cell phone but I don´t know what else I can do.
Any suggestion?
Click to expand...
Click to collapse
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Brittlespeed said:
Well, I got this same Firmware upgrade error. I can't get the computer to see it at all. It's almost like the USB port doesn't work anymore. I can get into the download mode but then it ends there. I cannot get into the bootloader at all. If I try, it goes to the error screen and if I boot normally, it goes to the error screen.
Click to expand...
Click to collapse
I can't tell if you're asking for help or just letting people know, but anyway, considering all your previous posts were in the Epic 4G Touch forums, you've probably trashed your device flashing something meant for the I9100.
See this thread for confirmation of your new shiny brick, if my above assumption was correct: http://forum.xda-developers.com/showthread.php?t=1492323
this solution worked for a Galaxy s3 mini
fvnktion said:
I had the same problem on my SGS4g after updating to a leaked 2.3.4 rom, which would not make phone calls. Tried to use heidmall to downgrade by loading a new rom. After installing the usb driver as described here http://forum.xda-developers.com/showpost.php?p=14798367&postcount=1 . After reboot I get the error screen <phone..!..Computer> "firmware upgrade encountered an issue. Please select recovery mode in kies and try again". I then took the following steps.
I came across this site: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Bricked_Screen Under the bricked section it mentions a couple things to try. I the reboot cycle with a couple of times and kept on getting the same screen. Still no go.
I took Odia's advice an did a complete removal of all usb drivers as mentioned and reinstalled kies. This was key in getting odin to recognize the phone again.
My solution:
I try Odin again to try to get it to recognize my phone. I open odin with the usb connected in this state and it is not recognized. I pull battery, it boots to error screen. I restart odin and then plug in the usb and it is recognized. I was then able to load my pit, pda, phone, csc back onto the phone with odin. The first time it tried to load the data it failed, the second time it worked!
Interestingly I never got the "Download Screen". I was still on the mentioned error screen, yet odin was able to still see the phone. The status bar still showed up on the error screen as the fresh rom was being loaded.
I thought I was totally bricked, but this method worked in my case. Hope something similar might work for you.
I still don't know I would get this error screen and have to go through this after loading the required usb driver for heimdall? Any ideas?
Click to expand...
Click to collapse
Thanks a lot. My teenage son thought he had bricked his S3 mini but I was able to fix it after reading this thread. Thanks.

[q] help bricked my galaxy s2

I'm screwed! I was installing
MODEM_I9100XXKE4_REV_02_CL1009835.tar.md5
CODE_I9100XWKE7_CL215725_REV02_user_low.tar.md5
GT-I9100-CSC-XEUKD1.tar
and something happened in Odin3 and it froze, so I took the battery out and tried to restart it and now all I get is a blue and yellow screen that says Android System Recovery. I don't have anything backed up on the device, it didn't come with a microSD card, and it now says
Deleting Cryption Meta Data
-Copying media files....
#manual mode#
updating application....
applying multi-CSC
and that's it. When I hit reboot phone all I get is a screen with a triangle and an android symbol and when I hit apply update from sd card, same symbol, even when I tried to put a .TAR file on my dad's EVO microSD card and put it into the galaxy.
Also, now the USB cable doesn't recognize my phone for some reason so when I go back to ODIN mode it says
Product name - GT-i9100
Custom Binary Download - Yes (1 count)
Current Binary Samsung Official
When I try to restart the phone, it goes straight to the android recovery screen mentioned above, where I can't do anything, and then when I get into the Odin mode, it won't recognize the usb cable so I can link up to Odin3 V1.83 on the computer. Also tried the usb cable on other computers didn't find my phone. Also, as of right now it's not rooted, but I was in the process of rooting, when I realized I missed the Over the Air step so when I Odin3 an insecure.TAR file the WIFI was broke so S2 Root kept saying can't find usb connection even though it was connected, and somewhere along the line when I was trying to restore the radio's by installing the 3 files above, when it crashed something messed up? Now I can't do anything. PLEASE HELP
SO I AM STUCK! Please help????????
Flash the device firmware with Odin when you enter download mode.
Intratech said:
Flash the device firmware with Odin when you enter download mode.
Click to expand...
Click to collapse
Yop
http://www.jayceooi.com/2011/08/14/how-to-restore-stock-firmware-on-samsung-galaxy-s2-video/
I know this topic is old, but I am essentially having the same problem, I don't think it was really solved for the first guy, he can't flash the original rom using odin, because odin doesn't recognize his phone. And that is my issue too, I'm able to get into download mode/odin mode whatever, I plug in the usb cable, nothing, odin doesn't recognize it, I don't get a little sound like I do when I usually plug in a usb cable. Please any ideas would be appreciated.
cowk1ng said:
I know this topic is old, but I am essentially having the same problem, I don't think it was really solved for the first guy, he can't flash the original rom using odin, because odin doesn't recognize his phone. And that is my issue too, I'm able to get into download mode/odin mode whatever, I plug in the usb cable, nothing, odin doesn't recognize it, I don't get a little sound like I do when I usually plug in a usb cable. Please any ideas would be appreciated.
Click to expand...
Click to collapse
Try different versions of Odin (for example, if you're using V4, try V3 1.3 & V3 1.85 and vice versa), try different USB ports (particularly if you're using a port attached to a hub. You need to use a powered port), different USB cables & finally different PC's/different versions of Windoze if you need to.
Also, when you fire up Odin, check Task Manager in Windoze & make absolutely certain Kies or any processes associated with it (if you're not sure what these are, Google/search for them) are not running at the same time. As I've said, you need the drivers that come with Kies to use Odin, but Odin won't work if Kies or anything associated with it is running at the same time.
Try uninstalling Kies on your PC (you need the drivers that come with Kies for Odin to work), rebooting, reinstalling Kies (search for it), rebooting.
If none of that works try cleaning the USB socket of the phone a Q-tip (cotton bud) & some isopropyl alcohol. And if that doesn't work, it might be a case of the USB circuitry of the phone being shot (unless you haven't tried the above steps or are not following the right steps, which we'll never know because we're not there with you).
Was also having the same problem. I managed to get round it by flashing an I9100 package with all the files (PDA, PHONE, BOOT, CSC, PIT) and ticking re-partition. If I'm right, this completely wipes the phone and flashes this over, basically leaving you on a fresh slate.
Hope I helped!
epic118 said:
Was also having the same problem. I managed to get round it by flashing an I9100 package with all the files (PDA, PHONE, BOOT, CSC, PIT) and ticking re-partition. If I'm right, this completely wipes the phone and flashes this over, basically leaving you on a fresh slate.
Hope I helped!
Click to expand...
Click to collapse
Using PIT files is not recommended more brick a phone by flashing PIT than rescue it .
jje
Hi
It seems u tried to flash a sammobile firmware so look to their forum. Why dont u try a phone service?
Sent from my GT-I9100 using XDA

[Q] Soft-bricked, two versions of ODIN hang, out of ideas

I'm running a Samsung Galaxy S2 (SGH-I777) with the Shostock 3 ROM using the instructions from GalaxyS2Root (which I have since learned was not wise, but hey...you live and learn.)
Last night I plugged it in to a new charger, and when I woke up the phone was frozen on the Galaxy S2 Splash screen (the one with the yellow exclamation mark and the model number). I've tried several things to get it back, but nothing seems to work. I have tried:
•Getting back to stock using the I777UCKH7-CL503881-No-BL download from the "getting back to stock" thread at XDA but it hangs on the "cache.img" step, and now my phone shows the "firmware upgrade encountered an issue..." screen. I tried this several times with Kies installed, on, off, uninstalled and drivers only, and nothing made it past that step.
•Installing the latest firmware from sammobile.com via Odin 3.07. It gets to the "factoryfs.img" step and then gives me " Complete(Write) operation failed. All threads completed. (succeed 0 / failed 1)" despite re-installing drivers, switching ports, and doing it without the battery in. Also now the box with the phone's ID is blue, not yellow, despite further driver re-installs.
•Installing the Siyah Kernel, also via Odin, where the same error message occurs after "NAND WRITE START."
I have spent the better part of my day working on this, and I am completely out of ideas. As of right now, when the battery is in the phone it automatically starts itself up to the "Phone > ! > computer" firmware error screen recommending I go KIES, which does not recognize the phone (And, I have been turning off during ODIN runs and is currently uninstalled because I downloaded the S2 drivers directly).
I've been told that as long as I can get into download mode (which I still can, though I can't get to recovery) there is still some hope, so if anyone has any ideas I would be extremely grateful.
First, the reason for failed odin flash can be one of many things, such as bad usb port (on computer or on phone), or bad usb cable. Try other ports, other cables, even another pc. Also, Odin 3.07 may be a problem. Odin3 v1.85 is known to work with the I-777. I've had one person switch from v3 to v1.85 to get a flash to go through. And sometimes when there is a problem with odin flashes failing, multiple tries will eventually result in a pass.
The following is for recovering from nand read/write corruption on the I777. This may or may not be your problem, but it's worth a try.
1)Go to this post and download the Tar version of Siyah 2.6.14 Kernel. Flash it in PDA without ticking Re-Partitioning.
2) Successful? Nice. Next, flash the full stock Gingerbread distribution from the Download Repository, I777UCKH7 including the bootloaders and everything, in the PDA slot.
3) If that is successful you are done.
If it is not, then:
4) Download the SBL Bootloader from the Download Repository. Flash it as PDA in ODIN, without ticking Re-Partitioning.
5) Flash the Kernel, as in step 1.
6) Flash the full stock Gingerbread distribution, as in step 2.
creepyncrawly said:
First, the reason for failed odin flash can be one of many things, such as bad usb port (on computer or on phone), or bad usb cable. Try other ports, other cables, even another pc. Also, Odin 3.07 may be a problem. Odin3 v1.85 is known to work with the I-777. I've had one person switch from v3 to v1.85 to get a flash to go through. And sometimes when there is a problem with odin flashes failing, multiple tries will eventually result in a pass.
The following is for recovering from nand read/write corruption on the I777. This may or may not be your problem, but it's worth a try.
1)Go to this post and download the Tar version of Siyah 2.6.14 Kernel. Flash it in PDA without ticking Re-Partitioning.
2) Successful? Nice. Next, flash the full stock Gingerbread distribution from the Download Repository, I777UCKH7 including the bootloaders and everything, in the PDA slot.
3) If that is successful you are done.
If it is not, then:
4) Download the SBL Bootloader from the Download Repository. Flash it as PDA in ODIN, without ticking Re-Partitioning.
5) Flash the Kernel, as in step 1.
6) Flash the full stock Gingerbread distribution, as in step 2.
Click to expand...
Click to collapse
Flashing the SBL Bootlaoder from Odin 1.85 works and allows me to see the Galaxy S2 logo screen again instead of the Firmware error.
After that though, flashing the Siyah 2.6.14 kernel hangs up at the "STARTING NAND WRITE" step and stays there until I unhook it, which takes me back to the firmware error and requires me to flash the SBL again.
I only have one USB cable, but I typically use it for file transfer and it worked with the SBL flash, but that may be the culprit.
Also, when I hold the volume buttons and restart, it goes straight into downloading mode and does not allow me to choose to factory wipe the phone. I feel like if I could get that menu back, it could possibly solve the problem.
Thanks for the help so far, I'm glad I can at least get back here. If I don't have the original USB cable, how can I get another one and be sure it will be sufficient for the job?
SkipSandwich said:
Flashing the SBL Bootlaoder from Odin 1.85 works and allows me to see the Galaxy S2 logo screen again instead of the Firmware error.
After that though, flashing the Siyah 2.6.14 kernel hangs up at the "STARTING NAND WRITE" step and stays there until I unhook it, which takes me back to the firmware error and requires me to flash the SBL again.
I only have one USB cable, but I typically use it for file transfer and it worked with the SBL flash, but that may be the culprit.
Also, when I hold the volume buttons and restart, it goes straight into downloading mode and does not allow me to choose to factory wipe the phone. I feel like if I could get that menu back, it could possibly solve the problem.
Thanks for the help so far, I'm glad I can at least get back here. If I don't have the original USB cable, how can I get another one and be sure it will be sufficient for the job?
Click to expand...
Click to collapse
For the instant download mode, make sure no cable is plugged in and clean your micro usb port. Also glad to see you got help
Sent from my SGH-I777 using Tapatalk 4 Beta
122ninjas said:
For the instant download mode, make sure no cable is plugged in and clean your micro usb port. Also glad to see you got help
Sent from my SGH-I777 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Update so far:
I cleaned the USB port, which did turn out to be full of lint and other crud. I still can't get it to flash anything but the bootloader.
However, the phone will do nothing at all when the battery is in, and only works when plugged into the computer with no battery inside. I had been getting battery temperature errors, so I think it being kind old, a cheap USB cable, and the port being dirty for who knows how long probably fried that battery. I'm gonna get a new battery and a new cable and see if that helps me out.
USB Port i777:
http://pages.ebay.com/link/?nav=item.view&id=121134043504
Battery:
http://pages.ebay.com/link/?nav=item.view&id=121113924124
Samsung data cable
http://pages.ebay.com/link/?nav=item.view&id=400467800450
Sent from my SGH-I777 using xda app-developers app
Well, the new battery came in and still nothing. The screen will turn on again, but otherwise the behavior is the same. Except for a new cable, which I'll get tomorrow, I'm out of ideas.

Can't Recover Semi Bricked I9100P

Hi folks.
I have a I9100P from Vodafone 4.1.2. It is stuck at Samsung logo screen. I don't care about the phone, only want to recover some contacts and pics.
I have followed several (and similar) Odin guides to recover it. I have tried too many versions of Odin, Roms, etc... with different pcs, laptops and OS.
I always get the same result, the proccess stuck at the begining, the download bar even not appears on S2 screen, and no even progress shown at Odin screen.
I can't access to S2 internal memory, obviously.
Any alternative? Thank you very much!!!
Poleman8 said:
Any alternative? Thank you very much!!!
Click to expand...
Click to collapse
Did you install Samsung USB Drivers before attempting to do that procedure?
Have you used Odin 3.07 or 3.09?
What does Odin stuck at? What is written in the white place in Odin? Does it stuck or fail?
MigoMujahid said:
Did you install Samsung USB Drivers before attempting to do that procedure?
Have you used Odin 3.07 or 3.09?
What does Odin stuck at? What is written in the white place in Odin? Does it stuck or fail?
Click to expand...
Click to collapse
- Samsung USB Drivers v1.5.20.0 and v1.5.25.0
- I've tried v1.85, v3.07, v3.10.7, v3.11.1, and v3.12.3
- At the very begining, it does not fail, it stucks. In older odin versions at "DO NOT TURN OFF TARGET", in new ones, at BOOT "<ID:0/004> Firmware update start.<ID:0/004> SingleDownload.<ID:0/004> boot.bin". As I said, no progress at phone and Odin screens.
Thanks mate!
Poleman8 said:
- Samsung USB Drivers v1.5.20.0 and v1.5.25.0
- I've tried v1.85, v3.07, v3.10.7, v3.11.1, and v3.12.3
- At the very begining, it does not fail, it stucks. In older odin versions at "DO NOT TURN OFF TARGET", in new ones, at BOOT "<ID:0/004> Firmware update start.<ID:0/004> SingleDownload.<ID:0/004> boot.bin". As I said, no progress at phone and Odin screens.
Thanks mate!
Click to expand...
Click to collapse
Have you succeeded in flashing custom recovery?

Categories

Resources