Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!
Instructions:
Download firmware
Download Odin 3.07
Boot into download. (either hold power and volume down or do adb reboot download)
Click on PDA and then find Pre_Rooted_P5210XXUAMG6_P5210OXXAMG3.tar.md5
MAKE SURE RE-PARTITION IS NOT CHECKED!!! You will have an instant brick! You have been warned.
Click start and wait.
once done it will reboot into (stock) recovery and finish installing.
Once done and booted just open SuperSU and update the binary. Not by CWM but the other.
Done!!
I do not have a Tab 3 10.1, so let me know if this works please. I'll post a untouched copy of the firmware also.
Odin 3.07 - http://www.androidfilehost.com/?fid=23060877490002273
Pre_Rooted_P5210XXUAMG6_P5210OXXAMG3.tar.md5 - Still In Testing
Original Firmware - http://www.androidfilehost.com/?fid=23060877490002437 Or you can go to http://www.sammobile.com/firmwares/ and search for your firmware there.
Have Fun!!!
Wooohoooo finally! Thanks alot!
Sent from my GT-P5210 using xda app-developers app
imagelost said:
Wooohoooo finally! Thanks alot!
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
So does that mean that you flashed it and it works??? I hope!!! Woot!!
Not yet! Downloading now. Im on DSL, so it wont be till the a.m till I am able to try. Its 930pm here. I WILL let you know! Thanks again!
Sent from my GT-P5210 using xda app-developers app
imagelost said:
Not yet! Downloading now. Im on DSL, so it wont be till the a.m till I am able to try. Its 930pm here. I WILL let you know! Thanks again!
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
Kewl man.......I'll patently wait The SM-T211 worked first shot :Fingers Crossed: Thanks!!!
Zidkijah said:
Kewl man.......I'll patently wait The SM-T211 worked first shot :Fingers Crossed: Thanks!!!
Click to expand...
Click to collapse
Sorry the inform you but Super user binary update installation failed I reboot the device and try again no luck
Thanks for try my friend
:silly:
I wonder if I missed setting the permissions correctly........ I'll roll up another.......
Sent from my SM-T210R using XDA Premium 4 mobile app
Zidkijah said:
I wonder if I missed setting the permissions correctly........ I'll roll up another.......
Sent from my SM-T210R using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanx I guess I will try tomarrow
:good:
I'll download tonight and give a look. Great work man :thumbup:
Sent from my GT-P5210 using xda app-developers app
Zidkijah said:
I wonder if I missed setting the permissions correctly........ I'll roll up another.......
Sent from my SM-T210R using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Looks like it's still not working SU is in xbin but I'm not able to get super user access at all. Just thinking out loud here and I'm not sure if this is a possibililty or not but was the SU you used an updated version with x86 support? The reason I'm thinking that may be the problem is that when I try to run SU in Terminal I'm getting a Segmentation fault error.
I'm also thinking that when I ./simg2img system.img newsys.img there was an issue...... because the new image blew up to 2.5Gigs.......... Might try a different firmware this time................ I also just downloaded the updated su package. There are some other files in this tarball that has something to do with the update....... still digging
------------------------------------------------------ Update---------------------------------------------------------------------
I found /lib/arm digging around......... That leads me to believe that the su and Superuser.apk need to be built by the android arm tool-chain, I downloaded the most up to date binary and apk ....... Post a test link once uploaded.....
Zidkijah said:
I'm also thinking that when I ./simg2img system.img newsys.img there was an issue...... because the new image blew up to 2.5Gigs.......... Might try a different firmware this time................ I also just downloaded the updated su package. There are some other files in this tarball that has something to do with the update....... still digging
------------------------------------------------------ Update---------------------------------------------------------------------
I found /lib/arm digging around......... That leads me to believe that the su and Superuser.apk need to be built by the android arm tool-chain, I downloaded the most up to date binary and apk ....... Post a test link once uploaded.....
Click to expand...
Click to collapse
I tried to inject 4 different types of SU binary, but no luck - all programs telling that device rooted, but no write access to system folder. Simg2img works without any errors for me.
If anyone need, i can upload unpacked original GalaxyTab 3 10.1 recovery image for more experiments.
Crap, I hope it doesn't have anything to do with that permission folder I came across........ I think it was all java.
Test pack - http://www.androidfilehost.com/?fid=23060877490002706
Sent from my SM-T210R using XDA Premium 4 mobile app
Zidkijah said:
Crap, I hope it doesn't have anything to do with that permission folder I came across........ I think it was all java.
Test pack - http://www.androidfilehost.com/?fid=23060877490002706
Sent from my SM-T210R using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Looks like there's something wrong with the test pack it fails just after flashing system.img.
Zidkijah said:
Crap, I hope it doesn't have anything to do with that permission folder I came across........ I think it was all java.
Test pack - http://www.androidfilehost.com/?fid=23060877490002706
Sent from my SM-T210R using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, If I reinstall Official Firmware will Tab go back to store returnable state? On the download mode screen says
current binary: samsung official
system status: official
bespecter said:
Hi, If I reinstall Official Firmware will Tab go back to store returnable state? On the download mode screen says
current binary: samsung official
system status: official
Click to expand...
Click to collapse
Yes and no..... if they dont look to far into the tab (which they usualy dont then you will be ok) if you happen to have a techie smart guy checking it and he takes it into download mode he will notice the flash counter has 1 trigger meaning you played around with the system.. but thats less then 1% chance of happening.
Sent from my GT-P5210 using XDA Premium 4 mobile app
ShadowDice9100 said:
Yes and no..... if they dont look to far into the tab (which they usualy dont then you will be ok) if you happen to have a techie smart guy checking it and he takes it into download mode he will notice the flash counter has 1 trigger meaning you played around with the system.. but thats less then 1% chance of happening.
Sent from my GT-P5210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where can I see flash counter? There is no flash counter I see in download mode.
Thank you for help
bespecter said:
Where can I see flash counter? There is no flash counter I see in download mode.
Thank you for help
Click to expand...
Click to collapse
This is to give you an example..... if u dont have a flash counter trigger your good to go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-P5210 using XDA Premium 4 mobile app
ShadowDice9100 said:
This is to give you an example..... if u dont have a flash counter trigger your good to go
View attachment 2226391
Sent from my GT-P5210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank You
:good:
I have a new system image I'm working on packing up. I'm hoping this one will show some good results. I feel good about it
New Test Link - http://www.androidfilehost.com/?fid=23060877490004481
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To: Install IML74K.UCLD3 for SGH-I717
Warning: This will wipe your data entirely. BriefMobile is not liable for your actions. This is for the SGH-I717 only!
Download SGH-I717UCLD3-1FB30D08F1D2B2AAAECF49D262E8E707.exe
Install the Galaxy Note drivers
Run the "SGH-I717UCLD3-1FB30D08F1D2B2AAAECF49D262E8E707.exe" on a Windows PC
Power off the Galaxy Note
Put the Galaxy Note into "Download Mode" by holding both Volume Down and the Power Button
Connect the Galaxy Note to your computer. Ensure Odin recognizes it. You should see "0:[COM#]" fill in the first box.
Click "Start"
After it is finished, the Galaxy Note will reboot and it will be running Android 4.0.3 IML74K.UCLD3. Congratulations!
This doesn't belong in the Development section.
Korey_Nicholson said:
Warning: This will wipe your data entirely. BriefMobile is not liable for your actions. This is for the SGH-I717 only!
Download SGH-I717UCLD3-1FB30D08F1D2B2AAAECF49D262E8E707.exe
Install the Galaxy Note drivers
Run the "SGH-I717UCLD3-1FB30D08F1D2B2AAAECF49D262E8E707.exe"
Power off the Galaxy Note
Put the Galaxy Note into "Download Mode" by holding both Volume Down and the Power Button
Connect the Galaxy Note to your computer. Ensure Odin recognizes it. You should see "0:[COM#]" fill in the first box.
Click "Start"
After it is finished, the Galaxy Note will reboot and it will be running Android 4.0.3 IML74K.UCLD3. Congratulations!
Click to expand...
Click to collapse
What do u mean by run it? On phone or PC?
Sent from the TermiNOTEr!
borijess said:
What do u mean by run it? On phone or PC?
Sent from the TermiNOTEr!
Click to expand...
Click to collapse
Ftfy
Korey_Nicholson said:
Ftfy
Click to expand...
Click to collapse
Wtf?
Sent from the TermiNOTEr!
Anybody try this out yet? And, is this Note-specific software present and functional?
I hope you got permission to put it here! By the way if you don't wanna get flamed u should request mod to put ur thread in General! Or else
Is it ganna move the root on my galaxy note ?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
up and rooted! Very nice!!!!
just flash it via Odin as this is a one click. After that use Odin to flash CWM and then run the counter clear zip and SU zip for ICS - good to go!!
borijess said:
Wtf?
Sent from the TermiNOTEr!
Click to expand...
Click to collapse
Fixed that for you.
Sent from my SPH-D710 using xda premium
khajah said:
Is it ganna move the root on my galaxy note ?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Yes it will but you can easily reroot by flashing cwm
Sent from my SPH-D710 using xda premium
Is this rom stable?
Sent from my SAMSUNG-SGH-I717 using XDA
hegemytouch said:
Is this rom stable?
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
From the link page:
"The previously leak was version UCLC5. The following build is UCLD3. This is a major bug fix build, so there are no new features. Those who are testing this build out say it’s smoother than ever, although Instagram still doesn’t work. Without further ado, use the guide below to flash the new leak onto your SGH-I717."
Cool.. new leak :-D getting closer to official... then kernel sources and we even have init.d injection from another member... things are getting juicy personally waiting on a CWM version/ROM by a known dev using this base before I test drive it. Neat none the less and glad cwm/root are attainable without modification after Odin.
Sent from my SAMSUNG-SGH-I717 using xda premium
Whosdaman said:
Yes it will but you can easily reroot by flashing cwm
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Doesn't one need to be rooted to flash cwm?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Nice...one more thing does the spen work? And if im running a custom rom to i have to go back to stock then flash this rom?
Sent from my SAMSUNG-SGH-I717 using XDA
tdamocles said:
Doesn't one need to be rooted to flash cwm?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Flash cwm through Odin then flash su and super user through cwm
Sent from my SPH-D710 using xda premium
hegemytouch said:
Nice...one more thing does the spen work? And if im running a custom rom to i have to go back to stock then flash this rom?
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Yes and no
Sent from my SPH-D710 using xda premium
I got cwm installed through odin but having a hard time finding a zip for su and super user
jdphilly said:
I got cwm installed through odin but having a hard time finding a zip for su and super user
Click to expand...
Click to collapse
http://androidsu.com/superuser/
Hello, i have tried to reset binary count with triangle away and it didnt work. Tried with siyah 1.5.3, cf kernels and didnt reset. After i reset with triangle away it shows that binary count is 0 but after reboot it goes always for 1. Also i have reached binary count-3, have reset, after reboot it shows still 1. Also i got little red note of exclamation while s3 is booting up. So wtf could it be? thx for any help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wow red exclamation? Never heard of that. Btw did you tried the latest version. The the latest is 1.9.5 afaik
《swagged from aokp》
Why are you trying to reset it?? Only reset it if you're planning on sending your phone for repair, if not don't play around with it because you can brick your device, I've not seen it happen but it is possible!
Sent from my GT-I9300 using xda premium
speedyjay said:
Why are you trying to reset it?? Only reset it if you're planning on sending your phone for repair, if not don't play around with it because you can brick your device, I've not seen it happen but it is possible!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i wanted to reset not because of playing within, just to be safe. Here picture
speedyjay said:
Why are you trying to reset it?? Only reset it if you're planning on sending your phone for repair, if not don't play around with it because you can brick your device, I've not seen it happen but it is possible!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I don't think it's possible and also haven't heard any brick stories so far.
@edin
Try the same from a fresh stock rom
《swagged from aokp》
bala_gamer said:
I don't think it's possible and also haven't heard any brick stories so far.
@edin
Try the same from a fresh stock rom
《swagged from aokp》
Click to expand...
Click to collapse
Course its possible bud, that's why it gives you warnings before you continue, so obviously chainfire has experienced it lol
Sent from my GT-I9300 using xda premium
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
EdgaBimbam said:
i wanted to reset not because of playing within, just to be safe. Here picture
Click to expand...
Click to collapse
Does your phone boot??
Sent from my GT-I9300 using xda premium
speedyjay said:
Course its possible bud, that's why it gives you warnings before you continue, so obviously chainfire has experienced it lol
Sent from my GT-I9300 using xda premium
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
Does your phone boot??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
lol yeh, flashing everyday roms, doing restores, flashed stock firmware, still that red **** note.
EdgaBimbam said:
lol yeh, flashing everyday roms, doing restores, flashed stock firmware, still that red **** note.
Click to expand...
Click to collapse
Well resetting the flash counter flashes the bootloader so I can only assume its something to do with that
Sent from my GT-I9300 using xda premium
speedyjay said:
Well resetting the flash counter flashes the bootloader so I can only assume its something to do with that
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
maybe i have locked bootloader? or is it impossible?
EdgaBimbam said:
maybe i have locked bootloader? or is it impossible?
Click to expand...
Click to collapse
ERM....try flashing a different ROM, if you can then your bootloader is still unlocked, if you can't get to recovery then you've locked your bootloader....let me know buddy
Sent from my GT-I9300 using xda premium
speedyjay said:
ERM....try flashing a different ROM, if you can then your bootloader is still unlocked, if you can't get to recovery then you've locked your bootloader....let me know buddy
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
flashed stock odexed 2 times, criskelo, omega, wanam roms and still that red exlamation mark. I can access cwm without any problems,all functions are working, but binary count is always 1, i can reach 5 or more, reset with triangle away but still it will show 1
You may want to consult Chainfire, but i have an idea, flash stock ROM via Odin and check update bootloader, but double check with a senior developer first as I don't want to be responsible for a bricked device. Have you tried flashing with Odin?? Without bootloader update?? And starting again??
Sent from my GT-I9300 using xda premium
speedyjay said:
You may want to consult Chainfire, but i have an idea, flash stock ROM via Odin and check update bootloader, but double check with a senior developer first as I don't want to be responsible for a bricked device. Have you tried flashing with Odin?? Without bootloader update?? And starting again??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i flash stock firmwares only via pc odin. I download .tar file from sammobile, download mode, put .tar file at pda and then flashing. But it cant be locked bootloader, i couldnt be able to use cwm i think.
EdgaBimbam said:
i flash stock firmwares only via pc odin. I download .tar file from sammobile, download mode, put .tar file at pda and then flashing. But it cant be locked bootloader, i couldnt be able to use cwm i think.
Click to expand...
Click to collapse
That's true, and its only been their since using TriangleAway??
Sent from my GT-I9300 using xda premium
speedyjay said:
That's true, and its only been their since using TriangleAway??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
like i remember, i tried to flash this version firmware I9300ZNBLH3, got error at pc odin then flashed lh1 and i think that red mark appeared. Cant say exactly. But before was reseting binary count with triangle away without problems
EdgaBimbam said:
like i remember, i tried to flash this version firmware I9300ZNBLH3, got error at pc odin then flashed lh1 and i think that red mark appeared. Cant say exactly. But before was reseting binary count with triangle away without problems
Click to expand...
Click to collapse
OK and have you tried flashing stock ICS, and returning the phone to an 'out of the box' state?? I think most S3's came with LG8 so try that
Sent from my GT-I9300 using xda premium
speedyjay said:
OK and have you tried flashing stock ICS, and returning the phone to an 'out of the box' state?? I think most S3's came with LG8 so try that
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yeh, i have flashed stock ics by my region, still that issue persisted. I will try to pm chainfire for this strange issue.
I think you've done something quite bad!! Just done a bit of digging....ZNBLH3 is for china (dual core model) presuming you have the quad core right??
Sent from my GT-I9300 using xda premium
speedyjay said:
I think you've done something quite bad!! Just done a bit of digging....ZNBLH3 is for china (dual core model) presuming you have the quad core right??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
nah, it was for i9300 model and i didnt success in flashing it. Got error at pc odin, and flashed stock LH1 firmware.
atleast i'm able to flash everything, sucks that if i will need to take phone to samsung service, it will be without warranty
All models are I9300 mate (American, far east, Asian and European) all the same model, as Lithuania is in Europe, you should be flashing i9300XXLH3 not ZNBLH3, that's for china! Download I9300XXLH3 and try flashing that!
Sent from my GT-I9300 using xda premium
I really need a option to root this and I have searched high and low, I can find anything besides Kingo and that failed to root. Can someone please help me? I appreciate any help.
Geek
GeekTechMedia said:
I really need a option to root this and I have searched high and low, I can find anything besides Kingo and that failed to root. Can someone please help me? I appreciate any help.
Geek
Click to expand...
Click to collapse
I'm on the same way, and just got kingo. For now, I think, there's no other way to root it. The SPHL600 is not listed in the Kingo root web site as tested.
Sent from my SPH-L600 using XDA Premium 4 mobile app
Anything on this? Just got my phone today. Not sure I want to try kingo if the l600 isnt listed on supported devices.
Sent from my SPH-L600 using xda premium
Tried this
moosiemooses said:
Anything on this? Just got my phone today. Not sure I want to try kingo if the l600 isnt listed on supported devices.
Sent from my SPH-L600 using xda premium
Click to expand...
Click to collapse
They told me to try this:
http://forum.xda-developers.com/showthread.php?t=2527473
no luck, If you do let me know what you did.
Geek
Kingo works fine, just remember to make sure to do a nandroid backup
cray4phones said:
Kingo works fine, just remember to make sure to do a nandroid backup
Click to expand...
Click to collapse
Before or after rooting?
Sent from my SPH-L600 using xda premium
---------- Post added at 12:35 AM ---------- Previous post was at 12:00 AM ----------
GeekTechMedia said:
They told me to try this:
http://forum.xda-developers.com/showthread.php?t=2527473
no luck, If you do let me know what you did.
Geek
Click to expand...
Click to collapse
How long did it take kingo to install the drivers?
Sent from my SPH-L600 using xda premium
moosiemooses said:
Before or after rooting?
Sent from my SPH-L600 using xda premium
---------- Post added at 12:35 AM ---------- Previous post was at 12:00 AM ----------
How long did it take kingo to install the drivers?
Sent from my SPH-L600 using xda premium
Click to expand...
Click to collapse
Yes AFTER you will be heartbroken if you dont and something goes wrong. Theres not alot of love for this device yet
cray4phones said:
Yes AFTER you will be heartbroken if you dont and something goes wrong. Theres not alot of love for this device yet
Click to expand...
Click to collapse
Ive tried but that method fails. Goes straight to odin mode. The stock recovery doesnt work either.
Sent from my SPH-L600 using xda premium
moosiemooses said:
Ive tried but that method fails. Goes straight to odin mode. The stock recovery doesnt work either.
Sent from my SPH-L600 using xda premium
Click to expand...
Click to collapse
Plug your phone into the computer using the usb and let windows find your drivers. Then make sure (above all) that you have enabled USB degugging. It will always fail if you don't. I use kingo and I have a Sprint Mega as well and it took about 2-3 mins for kingo to root it. I kept it stock because I haven't seen any roms or recovery that I'm sure will work right now but I was able to remove all the crappy bloatware off.
professorfoxx said:
Plug your phone into the computer using the usb and let windows find your drivers. Then make sure (above all) that you have enabled USB degugging. It will always fail if you don't. I use kingo and I have a Sprint Mega as well and it took about 2-3 mins for kingo to root it. I kept it stock because I haven't seen any roms or recovery that I'm sure will work right now but I was able to remove all the crappy bloatware off.
Click to expand...
Click to collapse
Thank you. Ive rooted awhile ago. I just redid the twrp recovery method and it worked. I see there are roms out for other variants of the 6.3. Just wonder if any will work for ours.
Sent from my SPH-L600 using xda premium
moosiemooses said:
Thank you. Ive rooted awhile ago. I just redid the twrp recovery method and it worked. I see there are roms out for other variants of the 6.3. Just wonder if any will work for ours.
Sent from my SPH-L600 using xda premium
Click to expand...
Click to collapse
I see a lot out there too but I'm leery on trying any out only because I use this phone as my daily driver and can't mess it up right now. I might dedicate some time this weekend to trying out CM11. I'll let you know if it works.
professorfoxx said:
I see a lot out there too but I'm leery on trying any out only because I use this phone as my daily driver and can't mess it up right now. I might dedicate some time this weekend to trying out CM11. I'll let you know if it works.
Click to expand...
Click to collapse
Just tried slimkat. Failed... I think they all will. If you have any luck let me know.
Sent from my SPH-L600 using xda premium
Cm11 failed as well as aokp. Think we're boned until someone or us ports for our device.
Sent from my SPH-L600 using xda premium
Kingo Root SUCKS....does nothing but an endless cycle of checking root status and rebooting my phone. There HAS to be a better solution!
waltm78 said:
Kingo Root SUCKS....does nothing but an endless cycle of checking root status and rebooting my phone. There HAS to be a better solution!
Click to expand...
Click to collapse
Is your version MK1?
Sent from my SPH-L600 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SPH-L600 using Tapatalk
waltm78 said:
Sent from my SPH-L600 using Tapatalk
Click to expand...
Click to collapse
I tried Kingo on the update as well. Didn't work. I Odin back to MK1 then rerooted.
Sent from my SPH-L600 using xda premium
Is there an Odin root method?
Sent from my SPH-L600 using Tapatalk
waltm78 said:
Is there an Odin root method?
Sent from my SPH-L600 using Tapatalk
Click to expand...
Click to collapse
I'm not aware of one for that version. Kingo updates pretty often so I'm waiting.
Sent from my SPH-L600 using xda premium
Ok so I have to Odin back to MK1. Is there a rooted tar file for it or just the two step process
Sent from my SPH-L600 using Tapatalk
To extract the signed PIT file for use with Odin/Heimdall or anything else for the Galaxy S4 (SCH-1545, SGH-1337 and related Qualcomm variant S4's) first root your S4 then download terminal emulator.
Open terminal emulator and type the following commands:
Code:
su
dd if=/dev/block/mmcblk0 of=/sdcard/sch1545.pit bs=8 count=580 skip=2176
If you happen to have a pit file from a factory image you can compare the md5's. They should match, see attached image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What does this do?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Nicgraner said:
What does this do?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This is just one of those things if you have to ask, it isn't meant for you.
Sent from my Unicorn'd S4
SinfulRoad said:
This is just one of those things if you have to ask, it isn't meant for you.
Sent from my Unicorn'd S4
Click to expand...
Click to collapse
I still want to know
Sent from my SCH-I545 using XDA Premium 4 mobile app
Nicgraner said:
I still want to know
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try reading this: http://www.xda-developers.com/android/pit-magic-lets-you-create-analyze-and-edit-samsung-pit-files/
Sent from my SCH-I545 using xda app-developers app
Can I do these commands on adb?
Subscribed!!
Edit: After a few tries I finally got it to work; how big should the file be? Mine is 4.53kb
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
biglil1 said:
Can I do these commands on adb?
Subscribed!!
Edit: After a few tries I finally got it to work; how big should the file be? Mine is 4.53kb
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
4,640÷8 = 580
4,640÷1,024 = 4.53125 = ~4.53kb
Yep. Should be 4.53 but make sure by using md5sums
Sent from my SCH-I545 using XDA Premium 4 mobile app
Surge1223 said:
4,640÷8 = 580
4,640÷1,024 = 4.53125 = ~4.53kb
Yep. Should be 4.53 but make sure by using md5sums
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks; I did it on a custom rom (Echoe) but when I get out of work I'll check everything out in more detail
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Ran md5checker then realized I don't have that rom zip file on my phone any more so I checked to see if I still had it on my pc but I didn't. I do have the update for that rom and gonna flash it hopefully in the next couple of days and try this again.
What would happen if I flashed the pit file I created and Odin recognized it as having the wrong md5 #?
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
biglil1 said:
Ran md5checker then realized I don't have that rom zip file on my phone any more so I checked to see if I still had it on my pc but I didn't. I do have the update for that rom and gonna flash it hopefully in the next couple of days and try this again.
What would happen if I flashed the pit file I created and Odin recognized it as having the wrong md5 #?
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
Dont flash a pit file ever unless your close to bricked. I just thought this was good info for people to know. What was rhe md5?
Sent from my SCH-I545 using XDA Premium 4 mobile app
Yeah I figured instead of the stock MDK pit file when I'm faced with that I'll try the one I created with this method. I hope you can see it but here is the md5 for my created pit file
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
biglil1 said:
Yeah I figured instead of the stock MDK pit file when I'm faced with that I'll try the one I created with this method. I hope you can see it but here is the md5 for my created pit file
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
If you look at the image I uploaded in the OP, you'll notice that one of the files is the pit file from an odin factory tar, and the md5 value for the pit you created is exactly the same as the values in in the pic. You did it right.
Surge1223 said:
If you look at the image I uploaded in the OP, you'll notice that one of the files is the pit file from an odin factory tar, and the md5 value for the pit you created is exactly the same as the values in in the pic. You did it right.
Click to expand...
Click to collapse
Thanks; no I didn't notice that
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
@ Surge1223
Good work here
How would I go about finding the right bs= count = skip= numbers for an AT&T Galaxy S4-ZOOM SM-C105a Lte camera/phone it has the dual core exynos 4212 chip
This phone really needs some love from the devs It has root available but that's it, no custom recovery
so I've decided I'm going to have to start learning more of this for myself but before I delve in to deep I need info such as this so as to be able to restore when .not if I f - it all up A .pit file would be an essential escpecialy since there is not even a stock firmware image available from either AT&T or Samsung even almost 2 years after production This is the first Samsung phone I've ever Known of to not have an available stock firmware solution let alone anything custom
Sorry about the Rant can you point me in the right direction I have preformed full dd dumps of two of these phones both on 4.3 MJ2 firmware but as i stated I can only access adb from a running OS as there is no custom recovery available so even there I'm not 100% comfortable that I could restore from any and every scenario Again please help
Thanks in advance
Phatboyj420 said:
@ Surge1223
Good work here
How would I go about finding the right bs= count = skip= numbers for an AT&T Galaxy S4-ZOOM SM-C105a Lte camera/phone it has the dual core exynos 4212 chip
This phone really needs some love from the devs It has root available but that's it, no custom recovery
so I've decided I'm going to have to start learning more of this for myself but before I delve in to deep I need info such as this so as to be able to restore when .not if I f - it all up A .pit file would be an essential escpecialy since there is not even a stock firmware image available from either AT&T or Samsung even almost 2 years after production This is the first Samsung phone I've ever Known of to not have an available stock firmware solution let alone anything custom
Sorry about the Rant can you point me in the right direction I have preformed full dd dumps of two of these phones both on 4.3 MJ2 firmware but as i stated I can only access adb from a running OS as there is no custom recovery available so even there I'm not 100% comfortable that I could restore from any and every scenario Again please help
Thanks in advance
Click to expand...
Click to collapse
Bs is still probs 8. The count and skip involve some investigative work. I explained in another thread somewhere let me try to find it to link you...
Surge1223 said:
Bs is still probs 8. The count and skip involve some investigative work. I explained in another thread somewhere let me try to find it to link you...
Click to expand...
Click to collapse
Would greatly appreciate bro any other ideas you might have on boosting development for the S4-ZOOM are welcome also whether they be links to info on making my own twrp recovery.img from source or links to those who might be willing to help or even do it for me This is a great community for learning sharing and the like thanks to productive members such as yourself
Thanks again
Surge1223 said:
Bs is still probs 8. The count and skip involve some investigative work. I explained in another thread somewhere let me try to find it to link you...
Click to expand...
Click to collapse
@ Surge1223 or anyone else with the know-how
Hey Bro
I'm still no closer to creating the .pit for my C-105a any chance you remember where that thread lyes
Thanks again I don't want to be a pest
Stock Rooted ROM - Official 4.4.2 Google OTA brought to ya by Team Nocturnal
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-Stock - No mods
-Rooted with SuperSU
-Busybox
-Zip Align'ed
-init.d support
-Odex and De-Odex versions
Someone post an IMG of about device so I may post here..I do not own the device...thank you
-----------------------------------------------------------
(Please do not mirror any of my download links, Thank you)
Downloads -
Odex - http://www.androidfilehost.com/?fid=23306841710657763 (Preferred and ART Works)
md5: 8f8f26c3a594183b4d4ebc22844f7274
De-Odex - http://www.androidfilehost.com/?fid=23306841710657789 (ART Will Not WORK!!)
md5: b2b9f4b04714f414ca938aae93a6c5e8
______________________________________________
Install Instructions
-Unlocked Bootloader
-Custom Recovery (I prefer latest TWRP)
-In recovery do a full wipe
-Flash ROM..if errors out flash a 2nd time (I'll fix once I get the device)
-Reboot to profit.
-------------------------------------
---------------------------------------
Please hit Thanks and rate the thread 5 Stars
-------------
**Donations are appreciated but are not expected Donate Here or [email protected] on Google Wallet
**Just hitting thanks is greatly appreciated but also not expected...or even positive feedback..thank you to all running SinLessROM
Flashable bootloader and radio will be here later....
1 more
Sent from my HTC One using Tapatalk
this might be a silly question but if im unlocked and rooted on 4.3 with the latest TWRP then can i just flash this and go? I just want to make sure i dont lose LTE connectivity and other stuff. thanks
nexus7lte said:
this might be a silly question but if im unlocked and rooted on 4.3 with the latest TWRP then can i just flash this and go? I just want to make sure i dont lose LTE connectivity and other stuff. thanks
Click to expand...
Click to collapse
You should be okay...I'll be making the bootloader and radio flashable soon
Sent from my HTC One using Tapatalk
awesome thanks. downloading now.... should i uninstall xposed framework for a new clean install since i have a bunch of modules running on 4.3 or does that not matter?
nexus7lte said:
awesome thanks. downloading now.... should i uninstall xposed framework for a new clean install since i have a bunch of modules running on 4.3 or does that not matter?
Click to expand...
Click to collapse
Doesn't matter...but If you have issues I would full wipe since it's a new base
Sent from my HTC One using Tapatalk
It worked great thanks so much. No problem upgrading. I did a full wipe after doing a backup. Everything is smooth, although SMS is not working over mobile data when using the xposed framework for it, tho that is not your fault. I guess I will try doing it the other way listed in here. thanks again, this is just what i needed since i am getting away from roms now that xposed framework offers so much in their modules.
nexus7lte said:
It worked great thanks so much. No problem upgrading. I did a full wipe after doing a backup. Everything is smooth, although SMS is not working over mobile data when using the xposed framework for it, tho that is not your fault. I guess I will try doing it the other way listed in here. thanks again, this is just what i needed since i am getting away from roms now that xposed framework offers so much in their modules.
Click to expand...
Click to collapse
Nice..glad all is good.
Sent from my HTC One using Tapatalk
mrjaydee82 said:
Nice..glad all is good. Well SinLessROM I have posted up has sms enabled and with the tweaks I've done..and the enhanced dalvik files it flies pretty damn fast...faster than stock
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
High praises from me as well on this build. Flashed it this morning and it is smooth and fast. Definitely excited about it and looking forward to your future work. :good:
Dead link? When i clicked both libks it says file not found.
Sent from my MyPhone A919i Duo using XDA Premium 4 mobile app
cryostasis25 said:
Dead link? When i clicked both libks it says file not found.
Sent from my MyPhone A919i Duo using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's working..possible the server was down for a bit
Sent from my One using Tapatalk
mrjaydee82 said:
It's working..possible the server was down for a bit
Sent from my One using Tapatalk
Click to expand...
Click to collapse
The TN forum site forwards to Apple.
eibbojtir said:
The TN forum site forwards to Apple.
Click to expand...
Click to collapse
It'll be back up sorry...xsmagical was playing a joke on someone...I'll post the links in this thread when I get home
Check post 1 I put them there
Sent from my HTC One using Tapatalk
Was able to downloaded it thanks
Sent from my MyPhone A919i Duo using XDA Premium 4 mobile app
Is it OK to flash this zip over 4.3.1 stock rooted? Or I need a full wipe?
Sent from my Nexus 7 using xda app-developers app
Steven How said:
Is it OK to flash this zip over 4.3.1 stock rooted? Or I need a full wipe?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I would backup your data apps and full wipe...but if you insist you can try...but if u have issues I would full wipe
Sent from my HTC One using Tapatalk
mrjaydee82 said:
I would backup your data apps and full wipe...but if you insist you can try...but if u have issues I would full wipe
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Alright thx for the advice :fingers-crossed:
Update: I flashed my os from 4.3.1 to 4.4.2...so far having no problem. Ohya,to those that use flash player alot. Pls install the hacked version of flash player for 4.4 first in 4.3.1. Then only you flash the 4.4.2. =]
Hy, first big THX for this stock Rom. Secondly I try ART in odex Version and its doesn't work. Someone the same?
Sent from my Nexus 7 using XDA Premium 4 mobile app
MaximN97 said:
Hy, first big THX for this stock Rom. Secondly I try ART in odex Version and its doesn't work. Someone the same?
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You using xposed? Or any mods? If so it'll break art
Sent from my HTC One using Tapatalk