Hello I JUST realized my god damn hero's screen must be broken, or, the mobo is somewhat malfunctioning. I can't seem to be able to access the lower part of my screen.
Not only that, it often "decalibrates" and starts malfunctioning even worse :S I have to go back to the lock screen in order to get it back working for a few minutes.
I'm currently running CM7... Please advice thanks
Any chance it could be a bit of a ROM malfunction? Have you tried any others? That would be what I would try first. Hope it helps
Yes.. I have I tried the latest VillainROM, elelinux's rom and the one I'm currently running... any more suggestions? ...
Known issue with Hero's, Half of the screen dies after a year or so.
Mines half dead as well
I think the digitizer malfunctions.
Unfortunately, the only cure is a replacement of the digitizer or a replacement phone.
I found mine Hero having that behavior today.. screen not responding, jus a part of it, but when i turn the screen off and on again it goes to lock screen, and in lock screen works always, and after unlocking the screen it works for some instants.. :/
Can anyone tell me how much do you think it will cost to change the digitizer?
EDIT: After a cache wipe and dalvik cache wipe as well it's working perfectly
£30 I think. Do search for digitizer aand screen not responding in the Hero forums. There should be instructions and suppliers there.
Sent from my Blade using XDA App
My buddy busted his screen but the phone still worked fine, a few weeks later he dropped it and the screen went completely dead. He ordered a new screen and digitizer and put it back together, the phone turns on and appears to be fine but the screen is super sensitive (acts weird at times) and the touch buttons do not respond at all. Clicking apps and such work fine but the 4 buttons do nothing. Any ideas?
Sent from my SGH-I997 using xda premium
I just bought a archos 101 g9 when it was on sale on woot last week and so far it is working pretty good, however I have an annoying problem with it.
If it has been sleeping for over a few minutes (regular sleep, not the deep sleep) and I wake it back up the touch screen goes crazy. The bottom left corner keeps detecting a touch event. It will cycle from multiple on/off touches a second to one on/off every few seconds. If I rotate the tablet to portrait, it will start scrolling the screen none stop to the left. So far the only fix is to do a reboot.
It does not happen every time, just occasionally when I wake it up from sleep.
Today i got a case for it, and whenever it is in the case, the touch screen goes crazy. Same touch events in that same area.
I am guessing something is wrong with the digitizer. Anyone else seen this problem before?
Have the same problem, and as I've read on xda and archosfans forums, this isn't an uncommon issue. We'll just have to wait for a firmware update, as rebooting seems to fix it, so it doesn't seem to be a hardware problem.
Sent from my ARCHOS 101G9 using Tapatalk 2
I have exactly the same problems.
@ARCHOS: PLEASE FIX THIS PROBLEM. THIS IS A SERIOUS BUG !
Sensitive Touch
I have similar problems with the touchscreen. If I'm holding it with one hand by a corner, it detects touch. The rest of the time it is a little jittery and releases or double taps in games. It's still not a deal breaker, though.
I hope we don't have to swap digitizers to fix it.
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
I have a similar issue sometimes.
For me the fix is simply to clean the screen.
The strange thing is, it happens even when the screen doesn't appear to be especially dirty but I put the tablet to sleep, give the screen a serious clean with a microfibre cloth and the touchscreen issues vanish.
Could be a different issue to what you guys are having but the symptoms are the same and it's an easy 'fix' to try.
Hope it helps.
Sent from my ARCHOS 80G9 using xda app-developers app
feffrey said:
I'll give that a try and see if that works. I just got a case and as soon as it is in the case it is even worse.
EDIT: I installed a calibration app on xda and it really made it worse!
What app are you using to calibrate it?
Click to expand...
Click to collapse
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
omegaRED7 said:
Use the inbuilt one, Settings > Repair & formatting > Touch screen calibration.
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I had not noticed that area in the settings before. Recalibrating it in the cover has helped a lot.
I pretty much had this since day 1......
The current state is ; it doesn't work at all then all of a sudden It will pop back into life and then pretty much go "mental" as already described, I also found it reacts poorly to minor temperature variations, i.e going from outside to inside and general day to day travelling. Recalibrating used to "help" but now has no effect.
From watching the debug logs part of me thinks it's a bit of both, hardware and software ( just a hunch ) I noticed the driver fail to get a "ping" response from the hardware a couple of times.
I've pratically given up on it myself and plugged a keyboard and mouse in via a hub on the full size usb...... The hub has now stopped working for some reason , I'm now on a OTG Keyboard with a Virtual Mouse Driver using the numeric keypad and some adb input trickery ,
I've got another touch screen/digitizer to plug in, just not got round to putting it in yet and a little part of me is starting to enjoy finding more elaborate ways of interacting with the device... :laugh:
Does anyone know who the OEM of the digitizer Unit is? My previous investigation led me to china but information seems to be thin on the ground with this one
surdu_petru said:
Hi !
Me too
...works fine after Touch Screen Calibrate , but the next reboot do the same !
Click to expand...
Click to collapse
Same problem and even managed a RMA from ARCHOS. Thing is your OC edition fixed it for me.
Hi,
My idiot friend dropped her phone, and after replacing the screen the first time it worked fine until she dropped it again and now the digitizer is unresponsive,
I have tried taking it apart and cleaning the connections, I am able to get into the camera app using the dedicated button, but only the on screen back button works the home or menu doesn't work, which make me Think that replacing the digitizer may fix the problem
Sent from my GT-I9300 using xda app-developers app
Hi
Can someone please give me some advice on a problem I have with my S3
It has recently had a new screen fitted and now I find I cannot long press anything on my home screens instead it thinks I am pressing it and just opens it. Although I can occasionally drag something to the bin to remove it.
Does this mean I have other hardware fault or the replacement screen has been improperly fitted.
It does also freeze up until I press power button off then back on swipe to unlock then its back to normal
Factory reset to no avail, considering flashing ROM but I suspect this is hardware related.
Any help would be much appreciated
Cheers
Lee
the replacement screen has been improperly fitted.
Most likely
JJEgan said:
the replacement screen has been improperly fitted.
Most likely
Click to expand...
Click to collapse
Same problem with my nexus 7, had the screen replaced, and it thought I was opening apps instead of swiping through the home pages, most likey a badly fitted screen, get them to double check its fitted correctly.
Sent from my GT-P5110 using xda app-developers app