Related
So I purchased a UK unlocked Touch Pro and had it shipped to the US. While I hope there will be an ATT radio rom flash in the future, I have a quick question for the veterans out there:
On the Touch Pro, under the Phone Band settings, you can select "GSM(1900+850)+UMTS(1900+850)"
When I do this all I receive is Edge on ATT, but aren't the UMTS bands correct already for ATT under this setting?
ajk1116 said:
So I purchased a UK unlocked Touch Pro and had it shipped to the US. While I hope there will be an ATT radio rom flash in the future, I have a quick question for the veterans out there:
On the Touch Pro, under the Phone Band settings, you can select "GSM(1900+850)+UMTS(1900+850)"
When I do this all I receive is Edge on ATT, but aren't the UMTS bands correct already for ATT under this setting?
Click to expand...
Click to collapse
There are several threads on this topic already...Here's one:
http://forum.xda-developers.com/showthread.php?t=410945
Thanks, I appreciate the reply, but I had read through that thread. I understand that the device is likely in need of a reprogrammed ROM to activate the hardware because at the end of the day it is not working. My question is specifically if the phone setting is allowing me to select the two ATT UMTS bands already why wouldn't I get 3G speed?
ajk1116 said:
Thanks, I appreciate the reply, but I had read through that thread. I understand that the device is likely in need of a reprogrammed ROM to activate the hardware because at the end of the day it is not working. My question is specifically if the phone setting is allowing me to select the two ATT UMTS bands already why wouldn't I get 3G speed?
Click to expand...
Click to collapse
I have the UK version of the phone as well and I have the same issue. I have selected the right bands for both UMTS and GSM but all I get is EDGE. The reason for this is either a hardware limitation (no radio antenna to support 850/1900 UMTS bands (let's hope not) or the factory installed radio firmware does not include those bands or all those da#@ iPhone 3G users are hogging all the UMTS bandwidth . Hopefully all we need is to flash a new radio or ROM to unlock these bands. Just because you can select this band in phone settings does not mean the radio or hardware support it.
I guess I am crossing my fingers along with you . Thanks!
See my thread
http://forum.xda-developers.com/showthread.php?t=418000
Even though this is for T-Mobile im sure if tmo gets unlocked att will to. Watch that and post there if someone cracks it they will post on that thread.
I have a question for the guys only getting EDGE when they have the correct bands set.......do you have a 3G enabled SIM card? (aka a USIM, some networks require you use one for the 3G to be utilised correctly).
Hi, in answer to your question, yes I have a 3G compatible SIM. I literally plucked it out of my TyTN 2/ TILT and put it in to the Touch Pro. The Touch Pro automatically found the ATT network, and when I went in to check bands I realized that there was an option for the US UMTS bands. I am guessing that others have been right when they have stated that just because there is a menu option it doesn't mean the radios are properly enabled.
ajk1116 said:
Hi, in answer to your question, yes I have a 3G compatible SIM. I literally plucked it out of my TyTN 2/ TILT and put it in to the Touch Pro. The Touch Pro automatically found the ATT network, and when I went in to check bands I realized that there was an option for the US UMTS bands. I am guessing that others have been right when they have stated that just because there is a menu option it doesn't mean the radios are properly enabled.
Click to expand...
Click to collapse
So currently you are using a HTC branded Raphael? Could you post your ROM/Radio details? (device info in settings/system) Also your ROM build (settings/system->about)?
mrvanx said:
So currently you are using a HTC branded Raphael? Could you post your ROM/Radio details? (device info in settings/system) Also your ROM build (settings/system->about)?
Click to expand...
Click to collapse
I have a 3G enabled SIM, been using it with the Kaiser for the past year with good 3G reception. I now have the HTC branded Raph (UK version) with no 3G reception, only EDGE. Here's the info on my ROM/Radio:
ROM: 1.90.405.1 WWE (8/1/08)
Build: 19965.1.2.3
Radio: 1.02.25.19
OK so it seems the only radios actually in these Raphaels at the moment are all 1.02.25.19, once we have a decent way to flash a different radio stack to it we can see if it makes any difference both in the bands available and some of the reception issues we are seeing so far.
I'm not an expert in this area at all, far from it, but but was reading Black's post about his AT&T model and he has 1.01.25.16. Is this what you're going to flash it to once the HardSPL is completed given that you know his radio supports AT&T 3G?
I'm trying to keep up...
Has anybody heard an ETA for Hardspl? I know they where testing it. But any rumors on a timeframe?
My new UK Touch Pro (radio ver 1.02.25.19) is exhibiting this same behavior on AT&T... I have tried all combinations of those dropdowns under phone options without any luck. It does seem very strange that HTC put the US 3G bands in the band dropdown, but included radio software that doesn't support it...
... Why would HTC bother removing hardware supported bands in the software?
shaunco said:
My new UK Touch Pro (radio ver 1.02.25.19) is exhibiting this same behavior on AT&T... I have tried all combinations of those dropdowns under phone options without any luck. It does seem very strange that HTC put the US 3G bands in the band dropdown, but included radio software that doesn't support it...
... Why would HTC bother removing hardware supported bands in the software?
Click to expand...
Click to collapse
Because they couldn't get it working well enough in time for the release date, I guess. Similar to what appears to have been the case with the Diamond. The US isn't their main concern at the moment, so delaying a US-compatible version for now in or der to get it to the rest of the world on time.
Either that or it's deliberate act to slow down the grey imports until they do a proper US release in hand with the local carriers.
If AT&T doesn't want to subsidize the Pro/Diamond, HTC doesn't really have to worry about putting in 1900 support. And honestly, AT&T is too busy with the iPhone 3G to care about HTC.
On the other hand, I'm sure HTC is very interested in getting in on T-mo 3G (1700/2100). By downplaying 1900 (which is being eaten up by the iPhone, anyway), HTC can gear up for the fresh 1700/2100 band. Paired with Android, HTC could potentially gain a big chunk of US 3G networks.
I'm a touch pro user in Canada on the Rogers network. I too hope that HTC releases a radio that allows 3g network access. I don't think its a hardware limitation because it wouldn't really make sense to make two versions of the same phone just to disable parts of the radio.
I disagree with the statement that AT&T is too busy with the iPhone 3G to care about the Touch Pro. The fact is that the target audience for the two phones are entirely different and that a considerable amount of AT&T corporate customers still require their employees to use PPC based phones (even if the iPhone 3G supports email push).
Corporate standards don't usually move as quickly as they should, so of course AT&T is interested in extracting more money from customers that purchased a Tilt over the past 8 months and want to upgrade, but are not allowed to use an iPhone.
If HTC removed support because they were unable to get the software functioning properly, I can live with that. EDGE for a few months while HTC readies a new radio software package is fine... EDGE while HTC readies new hardware is not.
fhsieh said:
If AT&T doesn't want to subsidize the Pro/Diamond, HTC doesn't really have to worry about putting in 1900 support. And honestly, AT&T is too busy with the iPhone 3G to care about HTC.
Click to expand...
Click to collapse
If AT&T weren't interesting in pushing the Touch Pro, HTC wouldn't have went to the trouble and expense of making a specific hardware revision (PTT button) for them. That's not something HTC are gonna do just for the hell of it on a quiet Sunday afternoon.
Maybe I didn't read the thread well enough but did you try and flash the AT&T ROM that was posted? Maybe that might work!
Hello all!!
I have a new Titan II and have unlocked it from AT&T. So now I use it on T-Mobile.
Here is my issue-I can not send or recieve picture messages.
I also want to get 4G more permanent.
If anyone can help, I'd appreciate it.
Thanks in advance to all.
I have found one other issue.
I can not tether/internet share the Titan II.
So, so far we have a total of 3 problems/issues.
1) Not able to send or receive picture messages.
2) Not able to 4G regularly.
3) Not able to tether/internet share.
So I am sure that someone here knows what to do or how to help me.
I really would appreciate it.
Thanks in advance for the help people.
I'd be happy to DONATE to someone if they help with the issues I am having.
Ok your at&t branded Titan 2 is meant to support frequencies : UMTS/HSPA/HSPA+ tri-band (2100/1900/850 MHz) and quad band GSM/GPRS/EDGE (850/900/1800/1900 MHz) and LTE BC4/BC17,
Now I don't know which Freq T-Mobile use in USA but you probably wont be able to use all its features (LTE + 3G) seeing as it's not meant to be used for T-mobile etc, As for Tethering I can only assume if it's not available then it would be down to at&t firmware and you may need to flash a stock ROM to enable everything, If you were to use an at&t sim then all would work including LTE, All in all it's alot of messing about and unfortunately Operators branding limitations do not help.
run HTC Connection Setup to fix MMS and data.
4G is determined by radio frequencies. AT&T 4G is incompatible with T-Mobile 4G; same with 3G.
sh4d0w86 said:
run HTC Connection Setup to fix MMS and data.
4G is determined by radio frequencies. AT&T 4G is incompatible with T-Mobile 4G; same with 3G.
Click to expand...
Click to collapse
I'm trying to use a Titan 2 on Tmobile too. MMS doesnt work. with that app, HTC connection setup I get an error message that carrier doesn't exist in database.
Even changed apn to - epc.tmobile.com. still nothing
any help would be appreciated.
I have managed to get 3G working in UK on at&t branded unlocked Titan2 by manually changing APN but cannot send or receive picture messages, 3G works fine, Connection set-up doesn't have the carrier in database, Don't think there is a way round it until it becomes possible to flash a stock Titan2 ROM if one actually exists?
Andy
Thanks alot for the help or at least the insight.
I have updated the APN but still no change.
Not giving up tho. I am sure someone will fugure this out sooner or later.
Tried donating to you...but you have no donate button with in you profile.
If you send me a pm with your info I can get you something for your effort.
Same issue here. Except mines unlocked on Telus. No MMS, group text and of course tethering. HTC Connection also fails on mine.
Funny enough on my Titan 1 all of these work flawlessly on the same sim card and carrier.
I've contacted HTC directly to report the issue about a month or so ago and they claim to be unaware of it. They couldn't provide me a solution so I just said I'd hope that HTC would day fix the HTC Connection app to be supported properly on the Titan 2.
@R1ryda14. Thanks for offer of donation, No need, Just hope I helped.
I gave up and sold my Titan 2, HTC could not help and the conclusion I came to was because it was at&t branded there was no way to manually input the MMS settings seeing as the Connection set-up database only had settings for at&t, I did manage to get 3G working by manual input of APN, The only way to get around this issue was to install a stock ROM, Unfortunately stock ROMs for the Titan 2 do not exist, A real shame as it is a lovely handset and the camera is superb, I hope you do manage to find a solution or that a Stock ROM does eventually materialise
3G/4G on T-Mobile will only work in areas that use the 1900MHz PCS band. T-Mobile uses its 1700MHz AWS band for its 3G/4G services nationwide. They have begun refarming some old 2G spectrum in the 1900MHz PCS band for use on their 3G/4G network recently. The PCS band is the same one that AT&T uses and has included in the Titan II. This is why coverage would be sparse or non-existent on T-Mobile 3G/4G. It all depends on the area you live since their PCS network is only recently being refitted beginning this summer.
I got a Titan 2 too and using it with Vivo here in Brazil. No 4G since we don't have LTE yet, but I got my Internet Sharing working after a hard-reset (don't know why).
Could not set MMS too. HTC Connection also tells me that it does not recognize my Carrier.
My 1st device was a HD7, and I already owned a HTC Ultimate (the HTC Titan here) and in both devices the HTC Connection worked. I dunno why it will not work on Titan 2.
Hi, this question may have been asked but how do I unlock a Verizon LG G3 to be able to use it on any carrier internationally?
I have heard of sites such as unlocklocks.com or similar, but can those sites be trusted, and if so is there a preferred site to use?
Once the phone is unlocked, do I just purchase a SIM card at the country I am visiting an purchase a temporary voice/data plan?
In my case I would like to know if the Verizon LG G3 smartphone would work with a voice and data plan in Colombia - how could I find out if this will work?
A quick search I did for network technology landed me to these pages:
gsmarena.com/network-bands.php3?sCountry=COLOMBIA
phonearena.com/phones/LG-G3_id8347
Thanks in advance!
Its not locked.
Just buy a sim and install it with APN settings and so forth. It may not support 4g in Columbia, but not because it is locked, because it isn't vendor locked at all.
Saw this and figured I post in here instead of starting a new thread. Will I have any problems being rooted or should I return back to stock?
blueis300 said:
Saw this and figured I post in here instead of starting a new thread. Will I have any problems being rooted or should I return back to stock?
Click to expand...
Click to collapse
No, but if you want to use LTE in Columbia you might need to revert to an earlier radio version than the v23c radio that Verizon built for Lollipop 5.0.1. Also, in Columbia the carriers there might use band3 for LTE as is common outside the USA.
For more information, check threads like http://forum.xda-developers.com/showthread.php?t=2968059
Verizon G3 Sucefully Working on LTE BAND 3
Sent from my VS985 4G using Tapatalk
From what I saw they use 1700mhz band 4. Might just revert to a basic stock rooted.
I have an old M8 lying around that I fired up and had remembered I had rooted it and the bootloader is unlocked.. Is there a way to 'trick' this phone into thinking it's an AT&T branded phone? hboot, etc. and that will allow me to RUU something official from AT&T? I know this sounds really strange and probably stupid but.. I just can't sleep and need something to fill the time.. Can I do it?
Don't think so, radio hardware is different, not to mention the partition layout.
Sent from my HTC6525LVW using Tapatalk
jbarcus81 said:
Is there a way to 'trick' this phone into thinking it's an AT&T branded phone? hboot, etc. and that will allow me to RUU something official from AT&T? ?
Click to expand...
Click to collapse
Absolutely not. At least not any way that is known; and your chance of failure is high (with a brick being the possible or even probable result).
As mentioned in the previous comment, the partitioning on the phones is different. If you try to run the RUU, you at best it will fail, at worst it will brick the device.
Most other M8 versions (that don't support CDMA) can be "converted" from one version to another (other exceptions being dual SIM and M8 Eye). But Verizon and Sprint are the oddballs here. Some experienced devs have been messing around with these variants from the start (to try to convert them) with no success.
Perfect! All I needed to hear! Ah well.. it was worth a shot! Just trying to get my account provisioned for LTE so I can get LTE on my unlocked devices.. I've been told, and read, that if I can get an AT&T branded LTE capable phone to just swap my SIM in it.. and let my account provision, then I'll have LTE on any device AT&T or not... Just trying to avoid a contract..
jbarcus81 said:
I've been told, and read, that if I can get an AT&T branded LTE capable phone to just swap my SIM in it.. and let my account provision, then I'll have LTE on any device AT&T or not... Just trying to avoid a contract..
Click to expand...
Click to collapse
As long as the phone is SIM unlocked (Verizon version is) then you should just be able to put an AT&T SIM in, and enter the proper AT&T APN for service, as long as the phone supports the proper bands. Its irrelevant whether the phone is AT&T branded or not.
Now the underlined bit in the paragraph above is the main issue. The Verizon M8 only supports one of the four bands (Bands 2, 5, 4, and 17) used by AT&T for LTE (Verizon M8 supports Bands 3, 4, 7, and 13). So depending on what band is used in your area, you may or may not get LTE.
But GSM (2G) and HSPA (3G) should work just fine on AT&T.
redpoint73 said:
As long as the phone is SIM unlocked (Verizon version is) then you should just be able to put an AT&T SIM in, and enter the proper AT&T APN for service, as long as the phone supports the proper bands. Its irrelevant whether the phone is AT&T branded or not.
Now the underlined bit in the paragraph above is the main issue. The Verizon M8 only supports one of the four bands (Bands 2, 5, 4, and 17) used by AT&T for LTE (Verizon M8 supports Bands 3, 4, 7, and 13). So depending on what band is used in your area, you may or may not get LTE.
But GSM (2G) and HSPA (3G) should work just fine on AT&T.
Click to expand...
Click to collapse
That's the odd part.. My main phone is the S6 Edge from Verizon.. it's on the AT&T network and I assume my APN is correct.. But it's not picking up LTE and I am almost certain the S6 Edge from Verizon will pick up the correct band for AT&T LTE .. But it's only using the H+ speed.. What's even more strange?? When I throw my SIM into the M8? I get LTE on AT&T and verify with 30+mpbs speeds.. I have no idea what's going on...
jbarcus81 said:
That's the odd part.. My main phone is the S6 Edge from Verizon.. it's on the AT&T network and I assume my APN is correct.. But it's not picking up LTE and I am almost certain the S6 Edge from Verizon will pick up the correct band for AT&T LTE .. But it's only using the H+ speed.. What's even more strange?? When I throw my SIM into the M8? I get LTE on AT&T and verify with 30+mpbs speeds.. I have no idea what's going on...
Click to expand...
Click to collapse
Yeah, that is strange. According to the specs for the S6 Edge here, the Verizon version supports the same LTE bands as the VZN M8, and actually some additional bands (2 and 5) that also happen to be bands used by AT&T.
One thing I can think of, is that the VZN M8 in actuality supports some bands that are not advertised/explicit in the specs. It wouldn't be unheard of, as members here have reported some versions of the non-CDMA M8 as supporting some bands not indicated in the specs. And that band happens to be what AT&T is using in your market region. In this case, that band would seem to be Band 17 (the only band that AT&T is known to use, that isn't listed on the S6 Edge specs).
Or the other possibility, is there is just some issue with the S6 that is preventing connection to LTE (but on the same supported band that the M8 has).
redpoint73 said:
Yeah, that is strange. According to the specs for the S6 Edge here, the Verizon version supports the same LTE bands as the VZN M8, and actually some additional bands (2 and 5) that also happen to be bands used by AT&T.
One thing I can think of, is that the VZN M8 in actuality supports some bands that are not advertised/explicit in the specs. It wouldn't be unheard of, as members here have reported some versions of the non-CDMA M8 as supporting some bands not indicated in the specs. And that band happens to be what AT&T is using in your market region. In this case, that band would seem to be Band 17 (the only band that AT&T is known to use, that isn't listed on the S6 Edge specs).
Or the other possibility, is there is just some issue with the S6 that is preventing connection to LTE (but on the same supported band that the M8 has).
Click to expand...
Click to collapse
Yeah.. I'm not worried about it.. I've been told that all I need is an AT&T branded LTE capable device hooked up to the account and that my account hasn't been provisioned for LTE .. I've seen this in a few places so it's worth a shot.. I ordered a junk LTE phone branded AT&T to test it out.. ordered a OnePlus 2 and will likely unload the S6 Edge (if it never picks up the LTE from AT&T)
jbarcus81 said:
I've been told that all I need is an AT&T branded LTE capable device hooked up to the account and that my account hasn't been provisioned for LTE ..)
Click to expand...
Click to collapse
As I've already mentioned, its not really necessary to have an AT&T branded device. I suspect the reason you've seen people say this, is that AT&T branding means by definition the phone has all the bands used by AT&T for LTE; since obviously the phone is intended for use on AT&T's network. Since AT&T uses a number of bands (4) and LTE bands being used worldwide has become very un-standardized, its somewhat difficult to find a non-AT&T phone that has all the bands. But they do exist, such as the US unlocked M8, Dev Edition M8, and Nexus devices. Also, I've seen folks used other non-ATT branded phones, which may not have all 4 LTE bands used by AT&T, but the one(s) needed in the particular user's region. Not ideal, but sufficient for some folks.
Another reason why some may say the phone needs to be AT&T branded, is that AT&T tech support won't provide you any support if you have a non-ATT phone. But honestly, I've used non-branded devices (and plenty of folks here have), and this is very rarely an issue. The folks here on XDA will usually provide you better support, anyway!
Of course, your ATT account needs to be provisioned for LTE in order to have that service. Its a simple matter, and doesn't cost anything (just need a smartphone data plan).
redpoint73 said:
As I've already mentioned, its not really necessary to have an AT&T branded device. I suspect the reason you've seen people say this, is that AT&T branding means by definition the phone has all the bands used by AT&T for LTE; since obviously the phone is intended for use on AT&T's network. Since AT&T uses a number of bands (4) and LTE bands being used worldwide has become very un-standardized, its somewhat difficult to find a non-AT&T phone that has all the bands. But they do exist, such as the US unlocked M8, Dev Edition M8, and Nexus devices. Also, I've seen folks used other non-ATT branded phones, which may not have all 4 LTE bands used by AT&T, but the one(s) needed in the particular user's region. Not ideal, but sufficient for some folks.
Another reason why some may say the phone needs to be AT&T branded, is that AT&T tech support won't provide you any support if you have a non-ATT phone. But honestly, I've used non-branded devices (and plenty of folks here have), and this is very rarely an issue. The folks here on XDA will usually provide you better support, anyway!
Of course, your ATT account needs to be provisioned for LTE in order to have that service. Its a simple matter, and doesn't cost anything (just need a smartphone data plan).
Click to expand...
Click to collapse
I've dug deeper and have to not only have an AT&T branded phone, I have to register the IEMI on my account, then swap the SIM card back into the other phone. I've got the phone but can't find a way to do this online so I'll have to call tomorrow...
Sent from my ONE A2005 using Tapatalk
I have a m8 whl sprint abd does not use CDMA only gsm network. I can I change the mid and convert the phone to get latest ota for dev edition version? I thanks
long.nguyen said:
I have a m8 whl sprint abd does not use CDMA only gsm network. I can I change the mid and convert the phone to get latest ota for dev edition version? I thanks
Click to expand...
Click to collapse
Absolutely NO.
What I mentioned above (Post #3) for the Verizon variant, also applies to Sprint (both versions support CDMA - the fact you don't use it is irrelevant). If you try to convert to another version won't work, and will probably result in a brick.
Also, even if you didn't have a CDMA version M8, you typically can't convert using an OTA, it has to be an RUU.
redpoint73 said:
Absolutely NO.
What I mentioned above (Post #3) for the Verizon variant, also applies to Sprint (both versions support CDMA - the fact you don't use it is irrelevant). If you try to convert to another version won't work, and will probably result in a brick.
Also, even if you didn't have a CDMA version M8, you typically can't convert using an OTA, it has to be an RUU.
Click to expand...
Click to collapse
@redpoint ; don't we have any chance to install different provider radios to Verizon Htc devices..?
because verizon devices you know that support 3, 4, 7, and 13 bands,but i want to enable band 20 for europe LTE..
pls help us to enable other bands =( because only u can do that as a genius =)
thanx a lot
cincon said:
@redpoint ; don't we have any chance to install different provider radios to Verizon Htc devices..?
Click to expand...
Click to collapse
Absolutely NOT. As already thoroughly discussed on this thread, if you attempt to install another version's radio on the Verizon version, it won't work, and you may radio brick the phone (permanent damage possible).
Different radios, different partition layout.
Don't even try it. Experienced devs have tried to "convert" by various methods and mods, and failed.
But there may be other ways (besides flashing another version's radio) to enable the band(s) you want, read on:
cincon said:
[MENTION=434105]
because verizon devices you know that support 3, 4, 7, and 13 bands,but i want to enable band 20 for europe LTE..
Click to expand...
Click to collapse
You can take a look at the following method, as it claims to enable Band 20: http://forum.xda-developers.com/verizon-htc-one-m8/general/lte-band-7-2600mhz-finally-guide-t2992523
Read the thread, and proceed at your own discretion. I'm not knowledgeable with changing NV values (it doesn't work on "GSM" M8 variants, so does not apply to me). I simply know this thread exists.
cincon said:
[MENTION=434105]
pls help us to enable other bands =( because only u can do that as a genius =)
Click to expand...
Click to collapse
Far from a genius, and I don't create any of these mods. I just contribute by passing on knowledge I've gained here. Really, that is part of what XDA is all about.
SO, I've searched the forums and no one has seemed to answer the question. They either skip over it or it just goes unanswered. Is there any way to get VoLTE to work on any other carrier than just Verizon on the G3? The phone supports it, the modem itself supports it but I'm not sure if it's locked down software wise to only be available on Verizon or if it'll be available on other carriers. I'm currently using an AT&T MVNO and I don't have the option available, the only phone I've had that didn't switch from LTE when on a call was my Lumia 928 (but that was when I was on Verizon itself) - the question stands - is VoLTE an option on any other carrier besides Verizon using this phone? I'm rooted running Jasmine 9.1 debloated w/Xposed.