Related
hello, greetings to all, I have a X10i, and it will install universalroot change the original numbering system for the Norse to upgrade to 2.1 when the numbers change and reset the phone tells me it should be closed forcibly Timescape, I try to upgrade to 2.1 pc companion error and tells me never recognizes the phone, and SEUS says I have the latest software, trarto of restauralor from the phone and I get error, open the market and I get error any program I run. restore it to factory settings and I get the same error, I went to the model information and tells me I have the firmware 1.6 but the model number which came out before I get one now X10i unkonwn is as if he had model now tell me I hope your help to do, ah another thing I can not install any program from mobile
When you editted the numbers when you were trying to upgrade you didn't enter the right numbers or you changed something else which you weren't meant to.
There is some amounst the may threads a solution to this which bin4ary made. I'll see if I can find it and point you in the right direction....
Sent from my X10i using XDA App
I'm sorry I can't seem to find it. My advice is send bin4ry a PM and hopefully he can find the right info for you.
Sent from my X10i using XDA App
thanks friends
nuncar21 said:
thanks friends
Click to expand...
Click to collapse
No worries. The problem is where some of the threads get so long tryng to find proper news and useful stuff gets mixed in with all the other stuff too.
Sent from my X10i using XDA App
Run this which will update you to 2.1 - http://forum.xda-developers.com/showthread.php?t=825675
XperiaX10iUser said:
Run this which will update you to 2.1 - http://forum.xda-developers.com/showthread.php?t=825675
Click to expand...
Click to collapse
and tell us how you go with it!
hello friends probe through the tutorial and download the program but when I run the program x10flashbat and asks me to connect the phone in flash mode and press any key to continue when I make that step completely closes the program that I can do
nuncar21 said:
hello friends probe through the tutorial and download the program but when I run the program x10flashbat and asks me to connect the phone in flash mode and press any key to continue when I make that step completely closes the program that I can do
Click to expand...
Click to collapse
Reread the guide carefully, and try again.
hello friends I have read all topics and I have tried everything, when I run the regedit in windows and put "Vid_0fce & Pid_adde" I do not see the DeviceInstance try putting "USB \ VID_0FCE & PID_ADDE" and I do not see anything I have Windows 7 32bit everything I've done with the phone plugged into debug mode but nothing that I get something, and when I run the file if you put nothing opens and when I plug in flash that I close the program
You have to have SEUS installed and PC Companion.. run it through PC companion once. Then do the regiedit thing.
To put your phone into flash mode, turn off the phone completely, then hold the back button and connect the phone through USB to the computer.
(when you do this, make sure PC companion is NOT running)
Hi,
I have purchased Xperia X10a from AT&T currently running Android 1.6. I went through many posts in this forum but couldnot figure out what is the exact way to get Android 2.1 on this phone. I know AT&T has not rolled out 2.1 updates for this phone. I would appreciate if anybody could help me in finding an exact method to get Android 2.1 on my phone now.
Thanks in advance!!!
pratikjac said:
Hi,
I have purchased Xperia X10a from AT&T currently running Android 1.6. I went through many posts in this forum but couldnot figure out what is the exact way to get Android 2.1 on this phone. I know AT&T has not rolled out 2.1 updates for this phone. I would appreciate if anybody could help me in finding an exact method to get Android 2.1 on my phone now.
Thanks in advance!!!
Click to expand...
Click to collapse
Read completely thru this then do search in Dev.
http://forum.xda-developers.com/showthread.php?t=827065
download this
http://www.multiupload.com/9N5BJ7II13
and extract it
you should have 2 folders, x10 flash and the firmware folder. inside the x10flash folder, you will need to create a folder and name it 2.1. open up the firmware folder, copy all contents from that folder and put it in the 2.1 folder you just created in the x10 flashtool folder.
on your phone, go to settings > applications > developement and make sure usb debugging is enabled.
turn your phone off and unplug the usb cable.
run the x10flashtool bat file on your computer. click flash, there will be a separate pop up. highlight 2.1, but do no click ok yet. on your phone (still off), hold the back button while plugging in the usb port. once you see the green LED on your phone, click ok on the flashtool.
it should start flashing.
once it finishes flashing, it may take a couple minutes for your phone to boot back up. if it doesn't turn back on after about 2 minutes after fininshing flashing, press the power button. it may take a few minutes to fully boot up.
once it boots up, click root on the flash tool and follow the instructions.
after rooting, download this
http://forum.xda-developers.com/showthread.php?t=833324
i would suggest only running the JIT option. unless you want to strip everything out of the firmware (you may loose some options you want).
after you get JIT enabled, go into market and purchase root explorer. excellent app to have. once you buy/install that, open root explorer, go to system/app, click mount as R/W. delete these apk's and only these ones (unless you think you want to use any of them)
backupandrestore
EManualLauncher
EManual
usersupport
creatouch
CrashSMS
FaceRecognition
moxiermail
PcCompanion
playnow*
Sync
SyncWizard
OmaDatasyncService
SEMCSetupWizard
trackid
wisepilot
chinesetextinput
Danish_Keyboard
SEMCTouchPalKoreanQWERTY
JapaneseIME
uWlopProvider
once you realize that timescape is useless, you can delete these:
Timescape.apk
TimescapePluginManager.apk
TimeScapeProvider.apk
TimescapeThemeBlue.apk
TimescapeThemeGreen.apk
TimescapeThemeIndigo.apk
TimescapeThemeOrange.apk
TimescapeThemeSakura.apk
i would also download launcherpro or another home launcher, after you install a new launcher, you can delete SemcHomeL.apk
reboot, enjoy
hi,
i downloaded the zip file. extracted it. but didn't find the x10flash folder in it. instead it only has DevID and Firmware folders. It has a X10flash windows batch file and X10flash executable JAR file.
so what do i do?
pratikjac said:
hi,
i downloaded the zip file. extracted it. but didn't find the x10flash folder in it. instead it only has DevID and Firmware folders. It has a X10flash windows batch file and X10flash executable JAR file.
so what do i do?
Click to expand...
Click to collapse
download using the link above but try using this tutorial..
http://forum.xda-developers.com/showthread.php?t=827065
fyzm345 said:
download using the link above but try using this tutorial..
http://forum.xda-developers.com/showthread.php?t=827065
Click to expand...
Click to collapse
i downloaded and am looking at the instructions it says
"Just add a new folder to the MAIN FOLDER of Flashtool which contains the firmware.
Now press Flash. The Tool will show you all firmwares which are stored in the FlasherFolder."
i dont see anything where i can run an .exe or where i can press flash
all i have in the folder is:
custom(folder)
x10flasher_lib(folder)
adb
adbWinApi.dll
AdbWinUsbApi.dll
USBFlash.dll
x10flash
x10flasher
in that order, where is the firmware package and how do i know if im missing loader.sin? also which one of those do i put the loader.sin into if i dont have it? im not understanding how to do this and to make matters worse i just rooted and loaded a custom rom on my captivate but im having trouble with the x10.
figured it out
Tchem said:
figured it out
Click to expand...
Click to collapse
how did you do it?
can you also let me know...;
thanks!!!!
Tchem said:
i downloaded and am looking at the instructions it says
"Just add a new folder to the MAIN FOLDER of Flashtool which contains the firmware.
Now press Flash. The Tool will show you all firmwares which are stored in the FlasherFolder."
i dont see anything where i can run an .exe or where i can press flash
all i have in the folder is:
custom(folder)
x10flasher_lib(folder)
adb
adbWinApi.dll
AdbWinUsbApi.dll
USBFlash.dll
x10flash
x10flasher
in that order, where is the firmware package and how do i know if im missing loader.sin? also which one of those do i put the loader.sin into if i dont have it? im not understanding how to do this and to make matters worse i just rooted and loaded a custom rom on my captivate but im having trouble with the x10.
Click to expand...
Click to collapse
"Just add a new folder to the MAIN FOLDER of Flashtool which contains the firmware.
Now press Flash. The Tool will show you all firmwares which are stored in the FlasherFolder."
how do i press Flash? i downloaded the file from the link you gave me in you first reply.
pratikjac said:
"Just add a new folder to the MAIN FOLDER of Flashtool which contains the firmware.
Now press Flash. The Tool will show you all firmwares which are stored in the FlasherFolder."
how do i press Flash? i downloaded the file from the link you gave me in you first reply.
Click to expand...
Click to collapse
The X10flash.bat is the flash tool.
pratikjac said:
how did you do it?
can you also let me know...;
thanks!!!!
Click to expand...
Click to collapse
What don't you understand?
Sent from my SAMSUNG-SGH-I897 using XDA App
Tchem said:
What don't you understand?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
well i didnt do it because i am still not able to understand....
can you please give me a step by step instruction on rooting process you followed???
i would really appreciate it....thanks!!!
Phone reboots after sony ericsson logo!!!!
I ran the flash tool. flashed the phone. now as soon as i power on, the phone boots upto sony ericsson logo and then it reboots again. i dont know what to do... please help me....
pratikjac said:
I ran the flash tool. flashed the phone. now as soon as i power on, the phone boots upto sony ericsson logo and then it reboots again. i dont know what to do... please help me....
Click to expand...
Click to collapse
Remove battery. Wait 10 seconds. Put battery back in and power on.
Done!!!!
done....works like a charm...i had to wipe my data and reflash it again....
thanks a lot everyone....
i have a question....i see "H" network instead of 3G. is it normal?????
pratikjac said:
done....works like a charm...i had to wipe my data and reflash it again....
thanks a lot everyone....
i have a question....i see "H" network instead of 3G. is it normal?????
Click to expand...
Click to collapse
Yes it is normal. You can think of H as 3.5G which is better than 3G. It is what every U.S. wireless company is falsely advertising as 4G
I was just wondering about why my phone couldnot get this 'H' network aka 4G network when my phone was running android 1.6 and was not flashed???
batman_112 said:
The X10flash.bat is the flash tool.
Click to expand...
Click to collapse
When I run x10flash.bat, a DOS window appears and says :
C:\WINDOWS>system32\cmd.exe
Please choose:
1.)32-bit windows XP
2.)64-Bit Windows XP
3.)32-bit windows Vista/7
4.)64-Bit Windows Vista/7
Please choose1-4):
My PC is on Windows 7. I just can't proceed further.
I also downloaded the Flashtool version 0.2.6. When I ran Flash, a window pops up, but doesn't show any Firmware for me to select (eventhough I did created a new 2.1 folder that contains the firmware). PLEASE HELP!
s4tr2n said:
When I run x10flash.bat, a DOS window appears and says :
C:\WINDOWS>system32\cmd.exe
Please choose:
1.)32-bit windows XP
2.)64-Bit Windows XP
3.)32-bit windows Vista/7
4.)64-Bit Windows Vista/7
Please choose1-4):
My PC is on Windows 7. I just can't proceed further.
I also downloaded the Flashtool version 0.2.6. When I ran Flash, a window pops up, but doesn't show any Firmware for me to select (eventhough I did created a new 2.1 folder that contains the firmware). PLEASE HELP!
Click to expand...
Click to collapse
Does changing Vista/7 to Vista or 7 help, also you are not on latest flash tool.
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
What error are you getting?
Have you tried using Recover instead of Refurbish?
anseio said:
What error are you getting?
Have you tried using Recover instead of Refurbish?
Click to expand...
Click to collapse
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
eccomania said:
the problem is i don't get any errors or anything, the programming button doesn't work at all, when i click nothing happens, not even opening the refurbrish or recover droplist...
Click to expand...
Click to collapse
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
anseio said:
Are you following this process?
http://forum.xda-developers.com/showthread.php?t=1457341
Click to expand...
Click to collapse
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
I'm just having problems installing Nokia Care Suite. It gets so far and I get a 1220 error.
Any ideas?
Sent from my iPad using Tapatalk HD
It's some odd registry error, right? I think you just click through it. You'll have to navigate to the program folder to open the launcher. IIRC, that's what I had to do.
eccomania said:
yes i tried that method too.. but no luck =(
i can't click programming button thats the problem... it's kinda deactivated I think
Click to expand...
Click to collapse
so, how did you solve this problem? Ive got exactly same trouble wasting my time for days...
Do You ha e a screenlock code on the device. I had to remove my Outlook account, which requires a screenlock code, remove the code and then I was good to go.
Sent from my Lumia 800 using Board Express
anseio said:
Are you opening product code RM-801 or have you moved the firmware to a different folder? Not much can be done from the RM-801 folder.
Click to expand...
Click to collapse
This. In order for the Programming menu to be available, you need to select "Open Product" from the File menu and choose the correct product code (RM-819, RM-801, etc.).
My problem is I can never get passed the "Checking Mode" or "Starting" stage. I keep pressing the volume up button + insert USB cable until I feel a short vibration. After that, Windows will recognise my device as DLOAD and after a short while, the device restarts. Nokia Case Suite will then prompt me to unplug the USB cable, shutdown the device and do the volume up + insert USB cable routine again. Rinse and repeat. What did I do wrong? I am using Windows 7 64-bit.
EDIT: I solved my problems by going to the C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers\ directory and manually installing all the x64 drivers.
Im also having a few problems with NCS... i just figured I would piggy back off this thread rather than start a whole new one....
When installing I get a error that says.... "ERROR 1904.Module C:\Program Files (x86)\CommonFiles\nokia\Service Layer \C\Service Modules\ServiceModule_00003\msml4.dll failed to register" I hit ignore but now when i connect my phone to my PC... it isnt being recognized as DLOAD or QC or anything. I am at a loss... i went through and installed the drivers that were in the Nokia folder manually, except one it wouldnt install for some reason. Any help would be greatly appreciated.
I am having the same problem on my lumia 920. I didn't find a solution yet. This thread is the only thing I found so far.
Edit: I tried ncs on x64 w7 and x86 w8
Not starting
my phone is not sarting after installing nopkia evolve
eccomania said:
Hi all, I have problem with nokia care suite,
i follow the tutorial for debranding lumia 800 (I have Tmobile DE) but when it comes to step "click programming and choose refurbrish" i can't do that =( because if i click the programming tab it doesn't do anything =(
i think i did everything correct, i downloaded the fw version changed the product code, the grey cube button turned to green, also the program recognize my phone and shows "USB1-RM801" but i can't flash it....
also i tried every usb ports on my computer
p.s. I use windows 7 64bit and original usb cable.
I hope someone can help me
Click to expand...
Click to collapse
I had same stupid problem. You have to change your o.s.country and region from control panel. Try UK or USA. Both will work..
Hope this will help.
Hello guys. I have been using ADW Launcher for a long time. After I rooted my Android, I uninstalled the stock launcher cause I thought it was useless... I have been trying to find a way to install a custom ROM on my Android, and found a site where it said before I start, I should do a Factory Reset. I forgot that the FR would delete my ADW Launcher, I did it.
Now, whenever I boot my phone, I am stuck on a black screen instead of my ADW Launcher!
I can't buy a new phone at the moment, so I desperately need your help! I know it was stupid, but please, dont' judge... ;u ;
This is the phone I have: sonymobile.com/gb/products/phones/xperia-mini-pro/
Please help.
reflash your phone mr.brilliant
Flash your phone with flashtool.
Go to search box for more info
Sent from my SK17i using Tapatalk 2
I am on a Mac, and I am not very good with this whole flash blah blah. Can you help me step by step? I have access to a PC, but my parents don't let me use it... that is why I prefer doing it on a Mac. If there is absolutely no way to do it on a Mac, I will look for the PC for help. But can you get me a better understanding, along with links etc? I don't like doing things on my own... that is the main reason my phone derped!
Thanks!
Download Sony bridge for MAC and do a repair of your phone that way.
ehnvis said:
Download Sony bridge for MAC and do a repair of your phone that way.
Click to expand...
Click to collapse
Yep.
Sent from my X8 using Tapatalk 2
coolbuy said:
reflash your phone mr.brilliant
Click to expand...
Click to collapse
LOL
coolbuy said:
reflash your phone mr.brilliant
Click to expand...
Click to collapse
:laugh:
OMG !! I can't stop laughing !!! Nice one!!:good:
yes... reflashing will work...
I am trying to connect it to my Mac, but nothing is happening. I enable USB debugging, messed around in the connectivity etc... nothing works!
Come on , the working solution is just simple , flash your phone with flashtool , you on mac , so simple you can go to your friends pc or even on an internet cafe ,, i am sure they dont have mac , and download flashtool and flash your phone
Sparksys said:
Come on , the working solution is just simple , flash your phone with flashtool , you on mac , so simple you can go to your friends pc or even on an internet cafe ,, i am sure they dont have mac , and download flashtool and flash your phone
Click to expand...
Click to collapse
First I need my phone to be able to connect... It's not connecting!
How can I connect? Nothing is working!
AchillesAOT said:
How can I connect? Nothing is working!
Click to expand...
Click to collapse
Go to a windows pc and do it like here in number 2. You can flash it with flashtool, so connect it to pc while holding volume up! That's it!
Or another one: Did you install cwm? Then you could download the 4.0.A.0.69 zip from here. Then you just go to recovery and click mounts/storage and mount your usb storage. You push the zip to your phone and flash the .zip. Then you are on 4.0.A.0.69, but only do this if you were on Gingerbread before, if you were on ics, just flash your phone with flashtool. Go to a windows pc and flash it
If your pc recognizes phone again you could install cwm with that tool. But better flash the ftf!
What do you mean by "my phone doesn't connect"? Does it charge whn you plug usb? Do the leds light up?
If you really do not have access to a pc there are two other solutions:
Install windows on your mac using bootcamp http://www.apple.com/support/bootcamp/
or
Create a vritual machine using virtual box
Enjoy
P.S
Next time you walk into an electronics store take a moment for yourself, breathe calmly, look at all the offers around you and ponder "wouldn't any of these machines that have 3times the power at 1/3 the price of a macbook a far wiser choice?" This should keep you from repeating foolish mistakes. Your parents are very wise at not letting you near a pc.
Rudjgaard said:
What do you mean by "my phone doesn't connect"? Does it charge whn you plug usb? Do the leds light up?
If you really do not have access to a pc there are two other solutions:
Install windows on your mac using bootcamp http://www.apple.com/support/bootcamp/
or
Create a vritual machine using virtual box
Enjoy
P.S
Next time you walk into an electronics store take a moment for yourself, breathe calmly, look at all the offers around you and ponder "wouldn't any of these machines that have 3times the power at 1/3 the price of a macbook a far wiser choice?" This should keep you from repeating foolish mistakes. Your parents are very wise at not letting you near a pc.
Click to expand...
Click to collapse
I already have bootcamp. But, I am trying my hardest to work on a Mac, since I know what to do. And yes, the LED lights, but it doesn't connect!
If you have bootcamp, do you alread have a pc partition set up? why don't you use that?
It is very hard to work on these things from a mac, it's THE rival to the android world so compatibility is the lowest possible.
As far as i know (and the cyanogen wiki goes) there are no simple methods for using flashtools on a mac, so best thing is to use bootcamp and load it from there.
Can you be more specific when you say that your phone "doesn not connect"?
Rudjgaard said:
If you have bootcamp, do you alread have a pc partition set up? why don't you use that?
It is very hard to work on these things from a mac, it's THE rival to the android world so compatibility is the lowest possible.
As far as i know (and the cyanogen wiki goes) there are no simple methods for using flashtools on a mac, so best thing is to use bootcamp and load it from there.
Can you be more specific when you say that your phone "doesn not connect"?
Click to expand...
Click to collapse
I do have Windows setup.
When I say it doesn't connect, I mean that the LED goes on, it starts charging, but I can't access my SD card, nor can I access the Sony Bridge Mac... So I can't do anything with the phone!
Also, a new problem arose. I can't click home. When I click the home button nothing hgappens!
Do you already have sdk tools installed on you mac?
If not
- go here http://developer.android.com/sdk/index.html, donwload mac version
- go into /platform tools/ and execute the android file
- in /platform tools/ open cmd window and execute "chmod +x fastboot-mac"
- execute "./adb devices", it should give a response if device is connected properly
-If all the above works then all you need to do is get any launcher.apk, place it in the /platform tools and execute "./adb push launcher.apk /system/app"
-If phone doesn't get recognized by the mac some people reported a problem with easy thether, so in terminal type sudo kextunload /System/Library/Extensions/EasyTetherUSBEthernet.kext and check if that solves the issue
This is how to manuall install an app from host. Hope it helps.
Btw, do you have cwm recovery installed? Also does the phone reboot constantly or when you get to final loading it just start giving a constant fc message from home?
Which home button started working? on the phone? Of course it does nothing, if you deleted the home app....
As long as connection works and leds light up phone isn't dead
Rudjgaard said:
If you have bootcamp, do you alread have a pc partition set up? why don't you use that?
It is very hard to work on these things from a mac, it's THE rival to the android world so compatibility is the lowest possible.
As far as i know (and the cyanogen wiki goes) there are no simple methods for using flashtools on a mac, so best thing is to use bootcamp and load it from there.
Can you be more specific when you say that your phone "doesn not connect"?
Click to expand...
Click to collapse
Alright I am on PC. How do I flash?
Well your only problem was the missing home.apk right? You don't need to reflash the whole firmware if you don't want to...here are the two options anyway:
Requisites: adb drivers. Make sure you have the adb drivers for the phone, if not http://forum.xda-developers.com/showthread.php?t=1623199
Method 1)
-Download flashtool
-Download your phone's stock firmware http://forum.xda-developers.com/showthread.php?t=1568792
-Place ftf file in the programs firmware folder
-Start flashtools, select flash icon, point to the ftf file you downloaded earlier (after selecting flash mode)
-holder volume down button and connect usb (with phone powered off) when flashtools prompts you to
-Wait for installation. Done
Method 2)
-Download sdk tools (as said above)
-Download/extract from any rom or market a launcher.apk
-Put apk into platfrom-tools folder
-Opend a cmd window and navigate to your platform-tools folder
- Type adb device to make sure device is connected and recognized (this time it can be turned on and plugged in)
- type "adb remount"
- type adb push (or install) launcher.apk /system/app/
- reboot
Done
hello !! i got this z ultra a month ago... rooted it with the help of Vroot... and unfortunately.. today, i was using an app called android tweaker.. used some settings there like GPU rendering, Multitasking & Touch sensitivity enhancer.. it asked for a hard reboot... there you go.. struck .. shows up sony logo and reboots... thats all.... i have flash tools, i have Backup TA .. i dont have cmw on the phone nor the titanium backup... kindly help me .... i tried to repair with pc companion.. but it fails to dect the phone as its not completely booting up... tried to get it detected in fastboot ... but it says something like S1 fastboot drivers not found ... !! requesting expwert advice.. i was with the latest version of update .. something like 510 or 526... i've not unlocked bootloader at all... :good::good:
GauthamD said:
hello !! i got this z ultra a month ago... rooted it with the help of Vroot... and unfortunately.. today, i was using an app called android tweaker.. used some settings there like GPU rendering, Multitasking & Touch sensitivity enhancer.. it asked for a hard reboot... there you go.. struck .. shows up sony logo and reboots... thats all.... i have flash tools, i have Backup TA .. i dont have cmw on the phone nor the titanium backup... kindly help me .... i tried to repair with pc companion.. but it fails to dect the phone as its not completely booting up... tried to get it detected in fastboot ... but it says something like S1 fastboot drivers not found ... !! requesting expwert advice.. i was with the latest version of update .. something like 510 or 526... i've not unlocked bootloader at all... :good::good:
Click to expand...
Click to collapse
You need to install the ADB sony drivers... 's1fastboot' requires these. Do a search on google and they will pop up.
actually here are the drivers:
HSPA+ http://developer.sonymobile.com/downloads/drivers/xperia-z-ultra-driver/
LTE http://developer.sonymobile.com/downloads/drivers/xperia-z-ultra-c6833-c6806-c6843-driver/
If PC companion still doesnt work then you will need to use 'flashtool' and can then flash an FTF firmware file.
flashtool: http://dfiles.eu/files/lbbuacfhe
.532 firmware: https://docs.google.com/file/d/0B_rMaA9i_MUSRi1zWlpCOXV4RUE/edit?usp=sharing
I was thinking of making a video on how to do all of these steps, however I have to fly out in a couple of hours so wont have time until next week...
thank you .... !! i will try all these ... i have a slow internet..
hamdogg said:
You need to install the ADB sony drivers... 's1fastboot' requires these. Do a search on google and they will pop up.
thanks thanks .... ill try these and let you know .. soon... my internet will lwt mw do these in a week hopefully ... thank you again... :good:
Click to expand...
Click to collapse
Next time, don't try to tweak a stock kernel. If you're not sure how stuff works, don't mess with it. If you're not sure about something then ask us before you do stuff like this. There's a reason why we're all here.
Sent from my Z Ultra, using XDA Premium 4
the driver package that i downloaded doesnt really has a .exe or .bat file... how do i get it installed ... really confused ...
GauthamD said:
the driver package that i downloaded doesnt really has a .exe or .bat file... how do i get it installed ... really confused ...
Click to expand...
Click to collapse
I emailed you this, but may have gone to spam..
they are just driver ini files and system config settings.
1) right click on my computer
1a) properties
2) device profile
3) look for devices without drivers
4) update driver
5) advanced/
6) have disk
7) use the unzipped folder as the location
8) yes continue with unsigned driver version
done
i may have missed a step as I only have access to my Ultra at the moment, but thats what you need to do
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Sonic1981 said:
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Click to expand...
Click to collapse
Sonic 1981: Professional Bricker since 2013.
Order some business cards ASAP
LordManhattan said:
Sonic 1981: Professional Bricker since 2013.
Order some business cards ASAP
Click to expand...
Click to collapse
When I hold down the volume down and plug. The green led blinks and goes off.. but fast boot is working fine. . I've ftf file. Which cannot be flashed in fast boot. Fast boot asks for .img or .sin files. Doesn't accept ftf.* . . My phone is into boot loop. . Can't use Sony pc companion as it restarts b4 the pc companion can install the drivers. . I need to use fast boot exclusively. ..
GauthamD said:
When I hold down the volume down and plug. The green led blinks and goes off.. but fast boot is working fine. . I've ftf file. Which cannot be flashed in fast boot. Fast boot asks for .img or .sin files. Doesn't accept ftf.* . . My phone is into boot loop. . Can't use Sony pc companion as it restarts b4 the pc companion can install the drivers. . I need to use fast boot exclusively. ..
Click to expand...
Click to collapse
The correct for fastboot is blue led always on
When using S1 mode the green led blinks then no led if im right
And use flashtool instead, much easier
Sonic1981 said:
Been there 3 times now getting used to my xzu being bricked lol, just ploug your phone into your computer using the usb lead then click on sony pc companion click on the start on support click update phone / tablet then click REPAIR MY PHONE after that follow the instructions that will bring her back from the dead
Click to expand...
Click to collapse
I did this but PC companion says : the device has software modified than it cant be repear.
What else cn i do?
natispain said:
I did this but PC companion says : the device has software modified than it cant be repear.
What else cn i do?
Click to expand...
Click to collapse
Flash with flashtool i suppose.
herogjan said:
Flash with flashtool i suppose.
Click to expand...
Click to collapse
First, it didnt work. I installed and uninstalled many times flashtool and different versiont of flashtool and finally I dont know how but it worked.