Hey, is there any root method out for our SGP311 on 4.2.2? I only found a Firmware for SGP312 devices. Could I use it for my 311?
http://forum.xda-developers.com/showthread.php?t=2424550
Greets from Germany
Gesendet von meinem SGP311 mit Tapatalk 2
dancecore92 said:
Hey, is there any root method out for our SGP311 on 4.2.2? I only found a Firmware for SGP312 devices. Could I use it for my 311?
http://forum.xda-developers.com/showthread.php?t=2424550
Greets from Germany
Gesendet von meinem SGP311 mit Tapatalk 2
Click to expand...
Click to collapse
Im not sure if there is root for .136, but what i did was root it at 370 and then update ota which kept my root. You can always downgrade back to 370 with flashtool and then upgrade ota if root is that important to you
Okay, I'll check it out this noon. Thanks for your answer.
I will report after that.
Greets
Gesendet von meinem SGP311 mit Tapatalk 2
As jetstream said, you have to be rooted before taking the OTA and have SuperSU installed as a system app with survival mode enabled. You can then take the OTA and keep root. I just did it myself. I found this info in the root threads in the development section off you want more info.
There is currently no way to root 4.2.2.
Sent from my SGP311 using Tapatalk 4
bsSkunkApe said:
As jetstream said, you have to be rooted before taking the OTA and have SuperSU installed as a system app with survival mode enabled. You can then take the OTA and keep root. I just did it myself. I found this info in the root threads in the development section off you want more info.
There is currently no way to root 4.2.2.
Sent from my SGP311 using Tapatalk 4
Click to expand...
Click to collapse
But "Survival Mode" only really works on the paid version of SuperSU or not?
I have the free version but if this is what it takes, then I'll be happy to buy and support the dev at the same time.
Crash338 said:
But "Survival Mode" only really works on the paid version of SuperSU or not?
I have the free version but if this is what it takes, then I'll be happy to buy and support the dev at the same time.
Click to expand...
Click to collapse
There is an option to enable pro features without spending the $, but it is certainly recommended to support the devs (I paid the $2.49; worth it to keep root). That said, it is possible that the survival mode is unnecessary. I don't know about that though. It would be up to you if you wanted to try without survival mode.
Also, as far as I saw from reading through the root threads; this will ONLY work if you update via the OTA on the tablet. If you try to flash the update via some other method you will probably lose root.
Info here: http://forum.xda-developers.com/showthread.php?t=2333566
Sent from my SGP311 using Tapatalk 4
Crash338 said:
But "Survival Mode" only really works on the paid version of SuperSU or not?
I have the free version but if this is what it takes, then I'll be happy to buy and support the dev at the same time.
Click to expand...
Click to collapse
Yes, Survival Mode is only available in SuperSU Pro. I could be mistaken but unlike Install SuperSU into /system being a requirement, I do not believe Survival Mode is truly a requirement for retaining root access when updating from 4.1.2 to 4.2.2. Hopefully someone that has successfully updated and retained root access using the free version of SuperSU will come by and confirm my belief. Either way, you should purchase SuperSU Pro, if for no other reason than to support the developer. It's only $2.49 USD.
Cat McGowan said:
Yes, Survival Mode is only available in SuperSU Pro. I could be mistaken but unlike Install SuperSU into /system being a requirement, I do not believe Survival Mode is truly a requirement for retaining root access when updating from 4.1.2 to 4.2.2. Hopefully someone that has successfully updated and retained root access using the free version of SuperSU will come by and confirm my belief. Either way, you should purchase SuperSU Pro, if for no other reason than to support the developer. It's only $2.49 USD.
Click to expand...
Click to collapse
I'll definitely purchase SuperSU Pro. I have paid so much more for apps that I barely use since I'm an app freak. The OTA is still not available for me but as soon as it is I'll try to update via OTA without Survival Mode and see if it works. If it doesn't, I'll try again with Survival enabled on the free version and if it doesn't work, I'll try again with the Pro version. I'll post my findings here unless someone beats me to it....
Crash338 said:
I'll definitely purchase SuperSU Pro. I have paid so much more for apps that I barely use since I'm an app freak. The OTA is still not available for me but as soon as it is I'll try to update via OTA without Survival Mode and see if it works. If it doesn't, I'll try again with Survival enabled on the free version and if it doesn't work, I'll try again with the Pro version. I'll post my findings here unless someone beats me to it....
Click to expand...
Click to collapse
So today I got my OTA notification and I did what I said I was going to try.
I first flashed a clean 4.1.2 stock rom and rooted. I pushed SuperSU into /System/App and tried doing the OTA without Survival mode which went through perfectly.
So survival mode is not required after all.
Crash338 said:
So survival mode is not required after all.
Click to expand...
Click to collapse
Good to know.
Crash338 said:
So today I got my OTA notification and I did what I said I was going to try.
I first flashed a clean 4.1.2 stock rom and rooted. I pushed SuperSU into /System/App and tried doing the OTA without Survival mode which went through perfectly.
So survival mode is not required after all.
Click to expand...
Click to collapse
Which FTF did you flash? And did you use Flashtool, Emma, etc?
EDIT: Got it done finally. Flashed the US FTF I found on the forums with Flashtool (also relocked bootloader), rooted, installed SuperSU as system app, downloaded and installed update with success. Thanks for the tip on Flashtool, I had forgotten about that program. The other methods I was trying to use were either wanting to install some crazy SGP311 FTF or told me that my device was modified and could not be updated.
Crash338 said:
So today I got my OTA notification and I did what I said I was going to try.
I first flashed a clean 4.1.2 stock rom and rooted. I pushed SuperSU into /System/App and tried doing the OTA without Survival mode which went through perfectly.
So survival mode is not required after all.
Click to expand...
Click to collapse
While it is true that Survival mode is not required if SuperSU is set as a system app, it is also true that once Survival mode is enabled, setting SuperSU as a system app is not required to preserve root. In other words, Survival mode is all that is needed to keep root alive with an OTA update to 4.2.2. Tried, tested, proven
X3remes said:
While it is true that Survival mode is not required if SuperSU is set as a system app, it is also true that once Survival mode is enabled, setting SuperSU as a system app is not required to preserve root. In other words, Survival mode is all that is needed to keep root alive with an OTA update to 4.2.2. Tried, tested, proven
Click to expand...
Click to collapse
I managed to keep root after OTA update without SuperSU set as system and without Survival mode.
Easy as
Just rooted my stock 4.2.2 SGP311 with guide from a Russian website that points to a tool from Chinese developer. Use it at your own risk, but it does the work for me. Cant post the link, so you have to copy paste, remove blanks and use Google translation to read it.
h t t p : / / sony-xperia.mobi/programmy/247-poluchenie-root-dlya-xperia-tablet-z-dlya-proshivok-10-3-1-c-0-136-sgp311-312-i-10-3-1-a-0-244-sgp321.html
To remove the Chinese Superuser app and replace it with SuperSU after tablet rebooted and you have root.
1) Install SuperSU from Google Play. Open the app.
2) Grant SuperSU root access from the the Chinese SuperUser app, press the right button
3) SuperSU will ask to update binary file, update using "Normal" method
4) Then remove Chinese SuperUser app.
5) Open SuperSU and repeat step 3. Reboot tablet
tebuwan said:
Just rooted my stock 4.2.2 SGP311 with guide from a Russian website that points to a tool from Chinese developer. Use it at your own risk, but it does the work for me. Cant post the link, so you have to copy paste, remove blanks and use Google translation to read it.
h t t p : / / sony-xperia.mobi/programmy/247-poluchenie-root-dlya-xperia-tablet-z-dlya-proshivok-10-3-1-c-0-136-sgp311-312-i-10-3-1-a-0-244-sgp321.html
To remove the Chinese Superuser app and replace it with SuperSU after tablet rebooted and you have root.
1) Install SuperSU from Google Play. Open the app.
2) Grant SuperSU root access from the the Chinese SuperUser app, press the right button
3) SuperSU will ask to update binary file, update using "Normal" method
4) Then remove Chinese SuperUser app.
5) Open SuperSU and repeat step 3. Reboot tablet
Click to expand...
Click to collapse
AWWW... Thanks dude... I been trolling the forum and searching the net for the last 3 days for this.
WORKS like a charm!
Just one mention for people that need lots of instruction cause its a bit of a pain... if u screw it up just re-run the program and start over.
To remove the chinese Superuser app:
1) Install SuperSU, at the request kitayschiny click right character
2) Go to SuperSU> Settings> 'Switch application Superuser ", agree on the operation
As a result he lost SuperSU and with it disappears kitayschina
3) Put out SuperSU Play market back
I found that on this link --> h t t p : / / 4pda.ru / forum/index.php?showtopic=470240&st=1080#entry24768810
Just wanna say THANK-YOU very much.:good:
Thank you a lot! Russian is my native language so it was easy for me to follow instructions. What a wonderful international cooperation. It worked instantly.
Sent from my SGP311 using xda app-developers app
Possibly it can be translate and available here for the others.
thanks
Worked for me also! 4.2.2. stock --> now rooted in under 5 minutes :good:
---------- Post added at 09:01 AM ---------- Previous post was at 08:56 AM ----------
I can't post this info in the XTZ android development thead under:
[Tab Z][ROOT] DooMLoRD Easy Rooting Toolkit (v17) {perf_event exploit}[20130717]
But I think they should now about this method. Maybe someone else can do this? (me = too few posts)
Probably it is a silly question.
Can the tool from Chinese developer be used with SGP311 with locked bootloader?
Thanks.
I just tried it and it worked fine.
SGP311, 4.2.2, 10.3.1.C.0.136
http://forum.xda-developers.com/showthread.php?t=2434453
Related
So here's the thinking:
Root is maintained with OTA update using Supersu Pro, survival mode.
I am rooted on 4.22 stock SGP311 10.31.C.0.1.136
So I can spoof locations.
Anyone want to confirm that they have recieved OTA, and where they are located?
That way the rest of us can benefit.
guitarplayerone said:
So here's the thinking:
Root is maintained with OTA update using Supersu Pro, survival mode.
I am rooted on 4.22 stock SGP311 10.31.C.0.1.136
So I can spoof locations.
Anyone want to confirm that they have recieved OTA, and where they are located?
That way the rest of us can benefit.
Click to expand...
Click to collapse
Just performed the update and root was lost :c
had survival mode activated
guitarplayerone said:
So here's the thinking:
Root is maintained with OTA update using Supersu Pro, survival mode.
I am rooted on 4.22 stock SGP311 10.31.C.0.1.136
So I can spoof locations.
Anyone want to confirm that they have recieved OTA, and where they are located?
That way the rest of us can benefit.
Click to expand...
Click to collapse
Remember you must also turn on the Install SuperSU into /system setting; make sure it is greyed out.
I'm still on a rooted 4.1.2 and have the second OTA update to 4.3 (.109) in my notifications. Rather than go through the whole flashing process, I wondered if anyone had successfully used the Survival mode in SuperSU to retain root from this point to .109?
Chimpdaddy said:
I'm still on a rooted 4.1.2 and have the second OTA update to 4.3 (.109) in my notifications. Rather than go through the whole flashing process, I wondered if anyone had successfully used the Survival mode in SuperSU to retain root from this point to .109?
Click to expand...
Click to collapse
you can try ot yourself,.but i reckon it will give you error while applying update.
Rootk1t said:
you can try ot yourself,.but i reckon it will give you error while applying update.
Click to expand...
Click to collapse
Yup, I'd read similar. I was more concerned that it would update but I'd lose root, so have to then do the full process.
Chimpdaddy said:
Yup, I'd read similar. I was more concerned that it would update but I'd lose root, so have to then do the full process.
Click to expand...
Click to collapse
I have a rooted 422 with su pro, The update process aborts mid way and the OS is left untouched, leaving all as it was. I am just too lazy to do the flashtool thing and all, so I left it alone.
I was able to go from 412 to 422 with the OTA and keep root.
bjrmd said:
I have a rooted 422 with su pro, The update process aborts mid way and the OS is left untouched, leaving all as it was. I am just too lazy to do the flashtool thing and all, so I left it alone.
I was able to go from 412 to 422 with the OTA and keep root.
Click to expand...
Click to collapse
I know, so lazy, if I wait long enough 4.4 will come around and that might keep root!
Nobody's read a successful account of this working then? I may as well just try it and see...
Possibly
If you have bought Supersu pro then you could try survival mode, provided that your phone is only root and doesn't have a custom recovery installed.
I personally haven't tried it on my tablet but on other phones like G2, OTA update retains root.
If you have CWM or TWRP installed then it won't let you update.
adielee said:
If you have bought Supersu pro then you could try survival mode, provided that your phone is only root and doesn't have a custom recovery installed. I personally haven't tried it on my tablet but on other phones like G2, OTA update retains root. If you have CWM or TWRP installed then it won't let you update.
Click to expand...
Click to collapse
Judging by all the posts I have read here so far, attempting to update to 4.3 via OTA will fail if your tablet's current firmware has been modified to have root access. Having SuperSU Pro installed with Install SuperSU into /system and/or Survival mode enabled does not help. I have attempted an OTA update with 10.4.B.0.577 and 10.4.1.B.0.109, and the update failed in both attempts. It's okay with me though. After reading about 4.3's bugs and seeing its UI, I don't really want to update to 4.3 anymore.
Cat McGowan said:
Judging by all the posts I have read here so far, attempting to update to 4.3 via OTA will fail if your tablet's current firmware has been modified to have root access. Having SuperSU Pro installed with Install SuperSU into /system and/or Survival mode enabled does not help. I have attempted an OTA update with 10.4.B.0.577 and 10.4.1.B.0.109, and the update failed in both attempts. It's okay with me though. After reading about 4.3's bugs and seeing its UI, I don't really want to update to 4.3 anymore.
Click to expand...
Click to collapse
you're right, but besides bugs introduced as every firmware does, some very positive tweaks were done "under the bonnet" like TRIM enabled to make less wearing of flash modules, and some performance tweaks noticeable not only in launcher, but mostly in games too.
So if you have root and recovery installed you can backup your data and install .109 prerooted firmware to evaluate it yourself.
Rootk1t said:
you're right, but besides bugs introduced as every firmware does, some very positive tweaks were done "under the bonnet" like TRIM enabled to make less wearing of flash modules, and some performance tweaks noticeable not only in launcher, but mostly in games too.
So if you have root and recovery installed you can backup your data and install .109 prerooted firmware to evaluate it yourself.
Click to expand...
Click to collapse
I would also recommend to flash a pre-rooted 4.3 from scratch for performance and less issues, but if you have a lot of apps installed and everything set up the way you want it can be a pain in the a$#.
Also the OP doesn't want to flash. But if he can it means that the OTA won't install because he has a custom recovery.
I don't see why Supersu pro with survival mode won't work for an OTA to keep root. This is provided that a you do not have a custom recovery installed. It's kind of the purpose for survival mode and if you do a search it works with most other updates with other devices (even for 4.4.2)
It may be possible that other mods may affect the OTA especially ones which were flashed or possibly xposed.
adielee said:
I don't see why Supersu pro with survival mode won't work for an OTA to keep root. This is provided that a you do not have a custom recovery installed. It's kind of the purpose for survival mode and if you do a search it works with most other updates with other devices (even for 4.4.2) It may be possible that other mods may affect the OTA especially ones which were flashed or possibly xposed.
Click to expand...
Click to collapse
I do not have (nor do I want) a custom recovery or custom ROM installed on my XTZ. I only have root access, which I achieved by using DooMLoRD's Easy Rooting Toolkit when I first received my XTZ back in May 2013. Since then, thanks to SuperSU Pro, I have updated my XTZ's firmware via OTA twice without losing root access. It is only with the last two XTZ firmware releases, 10.4.B.0.577 and 10.4.1.B.0.109, that the OTA updates fail. I suspect Sony's latest firmware releases include detection of root access, etc., which causes the update's failure to install.
Nope
Cat McGowan said:
I do not have (nor do I want) a custom recovery or custom ROM installed on my XTZ. I only have root access, which I achieved by using DooMLoRD's Easy Rooting Toolkit when I first received my XTZ back in May 2013. Since then, thanks to SuperSU Pro, I have updated my XTZ's firmware via OTA twice without losing root access. It is only with the last two XTZ firmware releases, 10.4.B.0.577 and 10.4.1.B.0.109, that the OTA updates fail. I suspect Sony's latest firmware releases include detection of root access, etc., which causes the update's failure to install.
Click to expand...
Click to collapse
Well, I tried it, thinking the worse that could happen is that it would abandon the install, but unfortunately it went right through and upgraded to 4.3 and I lost root
I'd put it into OTA survival mode but not into system/apps. I had no xposed or recovery anything, just root.
So there we go. Thanks for the discussion guys, hope this is useful to someone else.
How do I root it in 4.3? Any ideas?
Try this
http://forum.xda-developers.com/showthread.php?t=2703774
Sent from my SGP311 using xda app-developers app
Hi all,
I'm a bit of a n00b at this, so please forgive me.
I started with Android 4.1.2, Kernel 3.4.0-g298631f-02047-gec59411, build 10.1.C.0.370.
I rooted it using Doomlord's easy-root and then when attempting to flash custom recovery, I accidentally flashed some other .img and the tablet wouldn't even turn on. I cried. Like, a few good tears.
Went online, found out I wasn't screwed, and figured out how to flash SGP312_10.4.B.0.577_VMo DE_1273-3719_WIFI312G.
But, as I said, I lost root, and am confused about how to downgrade back to 4.1.2 properly without bricking.
Here is my current info:
Version 4.3, Kernel 3.4.0-g1b44cd5, build 10.4.b.0.577
In this thread, under "Downgrade your rom" and "back to 4.1.2 and rooting" it says "if you're in 4.3, Flash this SGP 351 4.1.2 FTF using Flash Tool and it will be booted in 4.1.2. if you have different Variant downgrade to your Variant FTF file"
What is a variant FTF file? Can I just use any SGP 312 4.1.2 FTF? Does anyone know a safe one to use?
Thanks!
Just wipe EVERYTHING on flashtools. Make sure that you have al wipe checked, and press start flashing.
But be careful, sometimes, bootloader is messed up with updates, not sure if it is your case because i don't have a SGP312. Instead i have the LTE variant, wich turned itself into an stubborn piece of technology LOL
Sent from my little big badass boy!
worf_1977 said:
Just wipe EVERYTHING on flashtools. Make sure that you have al wipe checked, and press start flashing.
But be careful, sometimes, bootloader is messed up with updates, not sure if it is your case because i don't have a SGP312. Instead i have the LTE variant, wich turned itself into an stubborn piece of technology LOL
Sent from my little big badass boy!
Click to expand...
Click to collapse
Thanks for the response!
Just not sure what you mean by "wipe everything". What am I flashing it with? Which firmware? And what's "al wipe"?
I tried posting a screenshot of the flash tools but as a new user I can't do it. Sorry for being a n00b.
UberBaumer said:
Thanks for the response!
Just not sure what you mean by "wipe everything". What am I flashing it with? Which firmware? And what's "al wipe"?
I tried posting a screenshot of the flash tools but as a new user I can't do it. Sorry for being a n00b.
Click to expand...
Click to collapse
I believe by "wipe everything" and "al wipe", they mean select to wipe APPSLOG, CACHE, and DATA during the flashing process. The flash tool you need can be downloaded from HERE. You can download a US version of the firmware from my post HERE.
Cat McGowan said:
I believe by "wipe everything" and "al wipe", they mean select to wipe APPSLOG, CACHE, and DATA during the flashing process. The flash tool you need can be downloaded from HERE. You can download a US version of the firmware from my post HERE.
Click to expand...
Click to collapse
THANK YOU, SIR.
I really appreciate it!
Back onto 4.1 and just rooted again. Now I just need to manage not screwing up installing CWM like I did last time!
Grrr...so I'm having trouble again.
When I try flashing CWM it keeps soft-bricking or whatever my tablet. It won't boot and I need to put it into fastboot mode and reflash the firmware.
I'm using the command fastboot flash boot TabZ_DooMLoRD_AdvStkKernel_FW-253-v01.img
Is there a better or another way to get CWM installed?
UberBaumer said:
Grrr...so I'm having trouble again.
When I try flashing CWM it keeps soft-bricking or whatever my tablet. It won't boot and I need to put it into fastboot mode and reflash the firmware.
I'm using the command fastboot flash boot TabZ_DooMLoRD_AdvStkKernel_FW-253-v01.img
Is there a better or another way to get CWM installed?
Click to expand...
Click to collapse
TabZ_DooMLoRD_AdvStkKernel_FW-253-v01.img is for the SGP321 running firmware 10.1.1.A.1.253.
You have a SGP312.
TabZ_DooMLoRD_AdvStkKernel_FW-344-v01.img is for the SGP312 running firmware 10.1.C.0.344.
You are running firmware 10.1.C.0.370.
You would probably have better luck trying to install Nut's XZDualRecovery.
Cat McGowan said:
TabZ_DooMLoRD_AdvStkKernel_FW-253-v01.img is for the SGP321 running firmware 10.1.1.A.1.253.
You have a SGP312.
TabZ_DooMLoRD_AdvStkKernel_FW-344-v01.img is for the SGP312 running firmware 10.1.C.0.344.
You are running firmware 10.1.C.0.370.
You would probably have better luck trying to install Nut's XZDualRecovery.
Click to expand...
Click to collapse
Jeez, dude, you're totally rocking my world. Thanks a ton for all your help.
I've successfully installed the XZ DualRecovery.
But now something weird is happening: when I try installing various roms (cm-10.2.0-pollux_windy or cm-11-20140418-nightly-pollux_windy) I get the error that it's for the wrong device. It tells me that I have a Pollux, but according to google, Pollux is the LTE version - I most definitely have the SG312 32GB WiFi version).
Did I go wrong somewhere here?
UberBaumer said:
Jeez, dude, you're totally rocking my world. Thanks a ton for all your help.
I've successfully installed the XZ DualRecovery.
But now something weird is happening: when I try installing various roms (cm-10.2.0-pollux_windy or cm-11-20140418-nightly-pollux_windy) I get the error that it's for the wrong device. It tells me that I have a Pollux, but according to google, Pollux is the LTE version - I most definitely have the SG312 32GB WiFi version).
Did I go wrong somewhere here?
Click to expand...
Click to collapse
I do not install custom ROMs. No ROM has ever impressed me enough to cause me to want to install it. However, I have read posts regarding your problem in the Xperia Tablet Z Original Android Development forum. Look there and perhaps you will find the answer you need.
Cat McGowan said:
I do not install custom ROMs. No ROM has ever impressed me enough to cause me to want to install it. However, I have read posts regarding your problem in the Xperia Tablet Z Original Android Development forum. Look there and perhaps you will find the answer you need.
Click to expand...
Click to collapse
Hmm, I see. I was excited to install Cyanogenmod because I have it on my Samsung Galaxy S3 and enjoy the customization and ability to remove all the bloatware.
According to your signature, I see that you're on 4.2... A few questions:
Did you do this through an official update?
Can I somehow flash 4.2 through recovery mode (so if I decide I don't like it, I can just load a system backup and go back to 4.1.2)?
If I were to update through the automatic system update, I'm assuming I'll lose my root access and won't be able to get back into recovery mode (in case I figure out a way to install a custom rom in the future)?
Is there a way to remove all the sony bloatware without root access (if I were to install an official system update)?
Sorry for all the questions. I'm just trying to get this all figured out before I start downloading all my apps and getting comfortable with the interface.
Thanks again so very much.
UberBaumer said:
Hmm, I see. I was excited to install Cyanogenmod because I have it on my Samsung Galaxy S3 and enjoy the customization and ability to remove all the bloatware.
According to your signature, I see that you're on 4.2... A few questions:
Did you do this through an official update?
Can I somehow flash 4.2 through recovery mode (so if I decide I don't like it, I can just load a system backup and go back to 4.1.2)?
If I were to update through the automatic system update, I'm assuming I'll lose my root access and won't be able to get back into recovery mode (in case I figure out a way to install a custom rom in the future)?
Is there a way to remove all the sony bloatware without root access (if I were to install an official system update)?
Sorry for all the questions. I'm just trying to get this all figured out before I start downloading all my apps and getting comfortable with the interface.
Thanks again so very much.
Click to expand...
Click to collapse
When I first received my XTZ, it was running 4.1.2. I gained root access using DooMLoRD's Easy Rooting Toolkit. I also installed SuperSU Pro and enabled its Survival mode and Install SuperSU into /system settings. Doing that allowed me to update firmware builds via OTA twice without losing root access. I have chosen not to update to 4.3 for various reasons; however, I did attempt updating to 4.3 via OTA like I have in the past, but the update failed to install. And from what I have seen of 4.4.2 on my son's Nexus 7, I may chose not to update to 4.4.2 also. My 4.2.2 install is working flawlessly and my XTZ does everything I need it to do, so I see no reason for updating yet. I live by the aphorism "If it's not broken, don't fix it."
If you install 4.2.2 (via flashing, you can no longer do it via OTA), you can use Vroot - English version to gain root access. Be aware that in the past, Vroot had a bad reputation regarding its loading unwanted apps during the root process, but I believe xda-developers and Mgyun-team (Vroot developers) had a talk and Mgyun-team has since changed their ways. In my opinion, Vroot is now safe to use. Many people have posted saying they have used it and have not experienced any problems.
I do not know of any way to remove bloatware without having root access.
Cat McGowan said:
When I first received my XTZ, it was running 4.1.2. I gained root access using DooMLoRD's Easy Rooting Toolkit. I also installed SuperSU Pro and enabled its Survival mode and Install SuperSU into /system settings. Doing that allowed me to update firmware builds via OTA twice without losing root access. I have chosen not to update to 4.3 for various reasons; however, I did attempt updating to 4.3 via OTA like I have in the past, but the update failed to install. And from what I have seen of 4.4.2 on my son's Nexus 7, I may chose not to update to 4.4.2 also. My 4.2.2 install is working flawlessly and my XTZ does everything I need it to do, so I see no reason for updating yet. I live by the aphorism "If it's not broken, don't fix it."
If you install 4.2.2 (via flashing, you can no longer do it via OTA), you can use Vroot - English version to gain root access. Be aware that in the past, Vroot had a bad reputation regarding its loading unwanted apps during the root process, but I believe xda-developers and Mgyun-team (Vroot developers) had a talk and Mgyun-team has since changed their ways. In my opinion, Vroot is now safe to use. Many people have posted saying they have used it and have not experienced any problems.
I do not know of any way to remove bloatware without having root access.
Click to expand...
Click to collapse
Damn, maybe I was a bit too hasty in rooting my tablet; why is it that I can no longer to OTA updates? If I were to buy SuperSU PRO (for survival mode) is there any benefit to me? I see that it allows for OTA updates.
I am currently rooted via Superuser (by clockworkmod).
When you say I'll need to install 4.2.2 by flashing, you mean through Flashtool, right? Which build should I get (and where, one of the development forums)?
Is the reason why one is advised to install custom roms via recovery mode in order to maintain root access (which I'm assuming doesn't happen if you flash through Flashtool)?
Something I forgot to mention earlier is that I did unlock the bootloader. I'm not sure if that helps or hinders me at this point.
Thanks again for taking the time to answer all my questions. I really love this new toy, and I'm so terrified of bricking it.
Cat McGowan said:
If you install 4.2.2 (via flashing, you can no longer do it via OTA), you can use Vroot - English version to gain root access.
I do not know of any way to remove bloatware without having root access.
Click to expand...
Click to collapse
If I were to say flash this version: http://android.sc/official-android-4-2-2-on-xperia-tablet-z/ I should still be able to install Vroot, right?
Also, do you just manually remove the bloatware yourself, or is there a particular script/app that goes in and cleans up all the unnecessary stuff?
UberBaumer said:
If I were to say flash this version: http://android.sc/official-android-4-2-2-on-xperia-tablet-z/ I should still be able to install Vroot, right?
Also, do you just manually remove the bloatware yourself, or is there a particular script/app that goes in and cleans up all the unnecessary stuff?
Click to expand...
Click to collapse
Android 4.2.2 Jelly Bean 10.3.1.A.0.244 is for the SGP321. You have a SGP312, so you need firmware 10.3.1.C.0.136 (same as mine), which you should be able to download from HERE (upload credit goes to user named spectre51). Flash it then gain root access using Vroot.
Regarding SuperSU Pro versus Superuser, I use Chainfire's SuperSU Pro because it has superior functionality and more options compared to ChainsDD's Superuser. And I use SuperSU Pro because it is more likely to retain root access rights after an OTA update than the free version of SuperSU; e.g., SuperSU Pro provides OTA survival mode, the free version does not.
Regarding uninstalling bloatware, that is something you need to be careful with. Some apps you want to keep have dependencies on apps you consider bloatware and want to uninstall, especially when it concerns system apps. So, investigate the app before you uninstall it. Most times, I use Titanium Backup Pro or ROM Toolbox Pro to uninstall apps that cannot be uninstalled via the Apps list found in the tablet's Settings. At other times, I have had to use a file explorer and text editor to uninstall an app.
Cat McGowan said:
Android 4.2.2 Jelly Bean 10.3.1.A.0.244 is for the SGP321. You have a SGP312, so you need firmware 10.3.1.C.0.136 (same as mine), which you should be able to download from HERE (upload credit goes to user named spectre51). Flash it then gain root access using Vroot.
Regarding SuperSU Pro versus Superuser, I use Chainfire's SuperSU Pro because it has superior functionality and more options compared to ChainsDD's Superuser. And I use SuperSU Pro because it is more likely to retain root access rights after an OTA update than the free version of SuperSU; e.g., SuperSU Pro provides OTA survival mode, the free version does not.
Regarding uninstalling bloatware, that is something you need to be careful with. Some apps you want to keep have dependencies on apps you consider bloatware and want to uninstall, especially when it concerns system apps. So, investigate the app before you uninstall it. Most times, I use Titanium Backup Pro or ROM Toolbox Pro to uninstall apps that cannot be uninstalled via the Apps list found in the tablet's Settings. At other times, I have had to use a file explorer and text editor to uninstall an app.
Click to expand...
Click to collapse
Thank you again my friend.
Is there a list of apps that are safe to uninstall, or, rather, a list of apps that I shouldn't tinker with (for fear of uninstalling an app that has a dependency on something critical)?
Also, I'm on the Google Play store and I see both Titanium Backup Pro and Rom Toolbox Pro. Should I buy both? If you had to buy just one, which would it be?
My main goal is to just make the smoothest experience possible. I want to take maximum advantage of the hardware in the tablet and have as few unnecessary programs running as possible.
So I have a Starmobile Quest which is a local smartphone and I rooted it using a chinese rooting program called iroot, formerly vroot, as suggested by people using the same phone. At first the superuser app(which is a Chinese one) is working fine and I could use apps requiring root access but suddenly, something happened and now it won't give root access to any of the apps. I think, maybe root was somehow removed, and downloaded the root checker app and when I ran it, it told me that I wasn't rooted.
So I unrooted my phone using iroot and it was successful and again rooted it which was again successful. I go and run root checker again and I was surprised to see that I wasn't rooted. From there I repeated the unrooting and rooting process several times and still nothing. What I did notice was that whenever iroot was checking whether my phone was rooted, a pop up would appear on my phone which is from the superuser app asking for permission to give "shell" root access and I would always say yes.
I believe that my phone is actually rooted but the superuser app isn't promting me for root access whenever I use apps that require root, plus there is no log saved except for the "shell" one. I tried changing root access manager app to supersu and when I run it it tells me that it needs to update su binary. I click yes and use the normal method(I don't have cwm) and it tells me it's installing but after awhile I receive an error saying "installation failed. try rebooting.". I reboot my phone and try updating again and it still fails.
I tried everything the internet threw at me, reroot, factory reset, clear data, clear cache, etc and nothing's working. Can someone help me here?
Note: I can't find a stock/custom rom for my device. So flashing roms isn't an option for me.
Bump.
have you tried to flash another version of superuser?
Crom4rtie said:
have you tried to flash another version of superuser?
Click to expand...
Click to collapse
How do I do that?
black_fire21 said:
How do I do that?
Click to expand...
Click to collapse
go to your recovery and go to install zip ..choose your zip ..or just download supersu from the playstore
Crom4rtie said:
go to your recovery and go to install zip ..choose your zip ..or just download supersu from the playstore
Click to expand...
Click to collapse
Do you need a custom recovery for that? Because the model of the phone doesn't have a custom recovery yet.
Also, I tried to install supersu from the play store and it didn't work.
black_fire21 said:
Do you need a custom recovery for that? Because the model of the phone doesn't have a custom recovery yet.
Also, I tried to install supersu from the play store and it didn't work.
Click to expand...
Click to collapse
yes you need a custom recovery...but if the su from the playstore didn´t work then will this also not work
Crom4rtie said:
yes you need a custom recovery...but if the su from the playstore didn´t work then will this also not work
Click to expand...
Click to collapse
Damn it. I guess I'll have to wait till they make a stock rom which I think isn't gonna happen since it's been half a year since the phone is released and there hasn't been any development.
Last question, Is it possible to flash your phone using a computer?
black_fire21 said:
Damn it. I guess I'll have to wait till they make a stock rom which I think isn't gonna happen since it's been half a year since the phone is released and there hasn't been any development.
Last question, Is it possible to flash your phone using a computer?
Click to expand...
Click to collapse
Yes absolutely. Just note that there are no rooting apps on the Play Store. Simply downloading SuperSU or Superuser will NOT root your phone. You need to be rooted first, and if the SuperSU or Superuser app isn't automatically installed, then once you root you can install SuperSU or Superuser to manage apps that require root.
Popular methods of rooting include z4root, framaroot, MTKTools and iroot (or vroot)
Z4root and framaroot are both android applications which you will need to get from their sites or XDA (just run a search). MTKtools and iroot/vroot are computer applications and use ADB. MTKTools can also create a custom recovery for your device, though I don't remember the process too well.
Once you're rooted you will either have your Superuser app installed or you'll have to install it yourself (I personally prefer SuperSU). I also recommend installing busybox as well.
Hope that helps.
Don't forget to hit the thanks button if I helped you~
SeraphSephiroth said:
Yes absolutely. Just note that there are no rooting apps on the Play Store. Simply downloading SuperSU or Superuser will NOT root your phone. You need to be rooted first, and if the SuperSU or Superuser app isn't automatically installed, then once you root you can install SuperSU or Superuser to manage apps that require root.
Popular methods of rooting include z4root, framaroot, MTKTools and iroot (or vroot)
Z4root and framaroot are both android applications which you will need to get from their sites or XDA (just run a search). MTKtools and iroot/vroot are computer applications and use ADB. MTKTools can also create a custom recovery for your device, though I don't remember the process too well.
Once you're rooted you will either have your Superuser app installed or you'll have to install it yourself (I personally prefer SuperSU). I also recommend installing busybox as well.
Hope that helps.
Don't forget to hit the thanks button if I helped you~
Click to expand...
Click to collapse
So how do I do that?
Hello my buddy so I 've read your thread, there are many apps to do root like root master, framaroot, towel root, towelpieroot. And the way to install super su is doing again the root. And after to install it again.
These apps to do root.
YAMALILLO JR said:
These apps to do root.
Click to expand...
Click to collapse
Okay so some of those do. But not all are supported anymore.
---------- Post added at 04:47 AM ---------- Previous post was at 04:11 AM ----------
black_fire21 said:
So how do I do that?
Click to expand...
Click to collapse
So MTKTools can be found scattered all over XDA, and Framaroot has a dedicated thread (which I cannot link right now as I am on my phone). If memory serves, Jellybean and below had Dev options enabled by default. If not, go to settings -> About Device and tap on the build number several times until your dev options are enabled. Then simply enable USB debugging. When you plug in your device you may need to authenticate your PC to use the Debug bridge. Just hit accept. (I'm sure that you were aware of how to enable ADB but I felt I had to explain anyway)
I assume you have the ADB drivers for your device, but if not, there is a naked USB driver installer floating around XDA (I really would only trust XDA with stuff like this)
With ADB enabled you can use the iroot and MTKTools PC applications. Both are generally straightforward but don't hesitate to ask me if you have a question.
With the APK apps you can get from XDA and abroad, you can root the device somewhat easily.
Framaroot (last time I used it) has four options for rooting (latest version is 1.9.3) you will see all info you need on that thread.
Z4 root I do not recommend. It is somewhat outdated now, though you might want to try it as a last resort
Towelroot is fairly simple as well. Simply download and run the app and you'll either get root or you won't.
My personal recommendations are MTKTools for a pc toolkit (seeing as it can compile a custom recovery too, which it did for my Lenovo S6000)
For apk rooting, I suggest Framaroot. I've never had any problems with it thus far.
I hope that explained it enough but if not, don't hesitate to ask questions. After all, you never learn if you don't ask ^-^
Nevermind guys. I downloaded a bunch of rooting programs and tried them. Root Genius worked and now I have root access. Thanks for replying to this thread.
ReInstall SuperSU and check with Android Terminal Emulator.
Ok dudes just i share this thread, cuz i like to help other dudes that they are juniors or they're beginning .
GFE on Rooted Z3v 5.0.2?
Followed the guides for the Verizon Sony Xperia Z3v & managed to upgrade to Android 5.0.2 with root access. I was ecstatic until I was told by my IT Administrators, that Good For Enterprises will not run/work on a rooted device. (Followed this guide exactly Guide)
I know it sucks, but I have to have Good For Enterprises for work. So...
1. What is the best way unroot so I can resume using GFE?
2. What will happen to the XZ Dual Recovery I've installed? Is it possible to keep custom recovery & get rid of root access, so that I can still flash new firmware in the future?
Thanks in advance!
did you try rootcloak?
As I understand it, to get back to stock will require flashtool and flashing the stock sony file.
Delebird said:
did you try rootcloak?
Click to expand...
Click to collapse
Yes, unfortunately rootcloak plus does not currently work for Lollipop & Good For Enterprises. Thank you for the thought though.
Best-
JediDru said:
As I understand it, to get back to stock will require flashtool and flashing the stock sony file.
Click to expand...
Click to collapse
I don't need to get back to stock, rather, I need to "un-root" the device so it will pass the GFE compliance check. In SuperSU there is a Full unroot option. Would that work to unroot the device? If I select that option, what happens to the custom dual recovery I installed per the previously posted guide on how to root & flash Lollipop?
Best-
cofcgrad05 said:
I don't need to get back to stock, rather, I need to "un-root" the device so it will pass the GFE compliance check. In SuperSU there is a Full unroot option. Would that work to unroot the device? If I select that option, what happens to the custom dual recovery I installed per the previously posted guide on how to root & flash Lollipop?
Best-
Click to expand...
Click to collapse
Going back to stock is the way to fully unroot. You can try the unroot function in the SuperSU app but I can't 100% guarantee that is enough for gfe to work.
I am uncertain if you can keep dual recovery when not rooted.
BladeRunner said:
Going back to stock is the way to fully unroot. You can try the unroot function in the SuperSU app but I can't 100% guarantee that is enough for gfe to work.
I am uncertain if you can keep dual recovery when not rooted.
Click to expand...
Click to collapse
Thank you all for the help. Ran the full unroot option in SuperSU, rebooted, installed GFE now works. Hope you all have a Happy Thanksgiving!
So you were on 5.02 rooted and using SuperSU you unrooted and rebooted for it to work? Can you root again using SuperSU just using the app after installing GFE?
pvcdroid said:
So you were on 5.02 rooted and using SuperSU you unrooted and rebooted for it to work? Can you root again using SuperSU just using the app after installing GFE?
Click to expand...
Click to collapse
Yes, that's correct. I used SuperSU to unroot, reboot, & then GFE was able to go through the full activation process. My understanding of GFE is that anytime the GFE Service starts, it does a compliance check & if it discovers root, it will force close the app. This is what was occurring when I tried to activate the GFE license with root access. It would activate & then when it went to start the GFE Service it would force close the app.
I have not tried to reroot with SuperSU to see if GFE will work once activated with root access. My guess from reading different forums is that it will not. I will try in a month or two after some time has passed for the IT guys at my company, to re-root the device & see if I can use GFE with the phone rooted.
cofcgrad05 said:
Followed the guides for the Verizon Sony Xperia Z3v & managed to upgrade to Android 5.0.2 with root access. I was ecstatic until I was told by my IT Administrators, that Good For Enterprises will not run/work on a rooted device. (Followed this guide exactly Guide)
I know it sucks, but I have to have Good For Enterprises for work. So...
1. What is the best way unroot so I can resume using GFE?
2. What will happen to the XZ Dual Recovery I've installed? Is it possible to keep custom recovery & get rid of root access, so that I can still flash new firmware in the future?
Thanks in advance!
Click to expand...
Click to collapse
did you see if that good for enterprise-root module on xposed that may have worked.