Hello,
I was trying to add a function to my phone were I had to edit build.prop. What I think went wrong is, I copied build.prop to a different part of my phone, edited it, then put ti back and overwriting current. In any event, the copy and paste or lines I added have caused my phone to display a black screen after the LG logo is displayed. I have tried to flash my device using methods at this forum http://forum.xda-developers.com/showthread.php?t=2085344, and though was able to get it to SW upgrade mode, had no success. When I connect the device to my computer it recognizes my phone and sdcard as removable devices but am unable to access them. If I could either view the items on my phone through my comp, I could copy build.prop back.
I have the P769 with JB 20f.
Thanks in advance for any help.
willevans said:
Hello,
I was trying to add a function to my phone were I had to edit build.prop. What I think went wrong is, I copied build.prop to a different part of my phone, edited it, then put ti back and overwriting current. In any event, the copy and paste or lines I added have caused my phone to display a black screen after the LG logo is displayed. I have tried to flash my device using methods at this forum http://forum.xda-developers.com/showthread.php?t=2085344, and though was able to get it to SW upgrade mode, had no success. When I connect the device to my computer it recognizes my phone and sdcard as removable devices but am unable to access them. If I could either view the items on my phone through my comp, I could copy build.prop back.
I have the P769 with JB 20f.
Thanks in advance for any help.
Click to expand...
Click to collapse
I would delete if I could, but followed another post on how to flash and that seems to be working.
Related
Greetings,
I have two Vibrants - one I bought from TMobile (and running stock everything), and one I later bought on eBay (running Froyo thanks to TeamWhiskey). I bought the second phone so that I could mess around with flashing ROMs and be able to brick a phone without it mattering. Hah.
Last night, for no reason I can discern, my stock TMobile Vibrant phone spontaneously soft bricked itself. My eBay test phone is fine.
I don't hugely care WHY the Tmobile phone bricked itself, but what I do care about are the pictures that are on the internal storage area.
I used Odin last night to flash in T959UVJI6.tar (but I did NOT use the 512.pit file). One of the posts I read said that doing so should fix a soft brick, without messing up the internal user storage area where pictures are located. No change - when I power on the Tmobile phone it hangs at the Galaxy S logo and then goes black.
Does anyone have any suggestions of how to access the internal storage area of a soft bricked Vibrant? And/or, can someone explain or point me at an explanation of what impact using a PIT file (vs not) and checking the "reformat" box in Odin (vs not) will have on the internal storage area? I don't care about overwriting the apps - I am just hoping there is some way to pull off the pictures or unbrick the phone WITHOUT deleting them.
Many thanks!
Wrong section..probably going to get flamed. Odin again with the pit file and you still wont lose pics and stuff. But next time...Q and A section...not being a ****, but that's where you ask all your questions.
sent from the other side of my galaxy.
jmercil said:
Wrong section..probably going to get flamed. Odin again with the pit file and you still wont lose pics and stuff. But next time...Q and A section...not being a ****, but that's where you ask all your questions.
sent from the other side of my galaxy.
Click to expand...
Click to collapse
Thanks for the reply. Is there some way I can move my post to the Q&A section? Or is that something only a Mod can do?
Also, do I check the reformat box or leave it unchecked?
Thanks again.
noise said:
Thanks for the reply. Is there some way I can move my post to the Q&A section? Or is that something only a Mod can do?
Also, do I check the reformat box or leave it unchecked?
Thanks again.
Click to expand...
Click to collapse
No need to reformat.
That's only for special occasions, really. And yeah, as far as I've seen, only mods can move posts.
yeah i would also like to know to that. the other day i deleted the 3d gallery app apk odex files because it was annoying the hell out of me with it's referenced folders - i tried clearing the default folder and but it was still showing random pictures from the shutdown folder and where ever else - so what did i do? i backed up the apk and odex file then deleted them from the system folder. rebooted w/o any issues - then i tried installing the apk... nothing - kept giving me a failed app install notification. i tried this 3-4 times then gave up. at this point i restored the apk/odex file to the system folder and rebooted the phone - nothing... gets past the galaxy s animation screen then screen goes black... nothing....
tried multiple reboot and keeps getting to the same black screen of doom - the other odd thing is windows do recognize it after it gets past the galaxy s boot screen and into the blank screen when i check in the device manager
ADB pull /sdcard/"whatever u have on ur phone"
Learn ADB
Reading is Fundemental
I'd also like to know if there are anyways to access the internal memory of a soft bricked phone. I know I can use ODIN, but I could fix the problem right now sans computer or USB if Clockwork recovery could access my sd card; I flashed a new kernal on stock JI6 and apparently needed to to flash a backsupport.zip first.
So, I don't have a cable with me, so can't use ODIN, clockwork recovery doesn't restore kernals and doesn't access the SD so... I'm screwed until I get home (not a huge deal). Alternatively, I could also not get clockwork to USB mount so I don't think that works either.
boimarc89 said:
ADB pull /sdcard/"whatever u have on ur phone"
Learn ADB
Reading is Fundemental
Click to expand...
Click to collapse
lol thanks man. but i also tried that. adb can't recognize it - and i found out it's the hard lock t-mobile version where doing the three button power up does not get you into the recover screen. unless i read that wrong? lol
Update: I used Odin again, this time with both the TAR and the PIT file. Same result as last time. Odin appears to have completed copying everything over successfully, but upon reboot, I still get the soft-brick Galaxy S that doesn't go away.
I didn't try ADB earlier because all the posts/various docs I read thus far seemed to imply that ADB needed a normally functioning phone - not one that got stuck at the Galaxy S logo. I was wrong.
Here's what I did, hope it helps someone else. [Commands below assume you're using windows, and want to copy the entire contents of the internal SD memory (called "/sdcard") on your PC that you created (e.g., "c:\sdcard"]
1. Install ADB
2. Plug in soft-bricked phone and power on
3. Run command prompt and navigate to the directory where adb.exe is located. In my case, it was C:\Program Files (x86)\Android\android-sdk-windows\platform-tools.
4. From the command prompt:
adb pull /sdcard c:/sdcard
NOTE: the c:/ slash should be as shown - not c:\ as you would normally type under Windows.
392 seconds later, I had all 8G of photos on my PC.
I still don't know why the stupid phone won't boot properly, but now I don't care and can blast everything away. Thanks to everyone who contributed. Next time I'll be sure to post in Q&A instead.
Moved of: Samsung Vibrant > Vibrant Android Development
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
excuse me for my bad english. i rooted my prime and then only uninstalled some asus system apps (vibe, picwe, mylibrary, asus webstorage and so on) by using titanium backup. today, one week later, i did a wipe from stock recovery (my bootloader is still locked), and then i'm not able to go beyond setup configuration: it stops casually when i pass to the next step, and when i succeed in arriving to the end it stops in closing the configuration in the same way. what can i do?
excuse me, in english it is called setup wizard.. is there a way to skip it? please, i'm desperate..
You have to have root. Do this (it also applies for the dead droid update)
1)Dowload Terminal Emulator from the market.
2)On your PC go to Asus site, Support, Tablet, TF201, Android, Firmware and chose your global firmware (.15) and download to your PC where you can find it.
3)Go to that location and create a folder called ASUSUpdate and in that folder create another folder called Blob.
4)Right click on your dowloaded FW and chose Extract All and browse to save in your new created folder AsusUpdate.
Once extract completed open ASUSUpdate and right clic on zip and chose extract all then browse to save in you new created folder Blob.
5)Connect your MicroSD to your PC (IE doggle). Select the blob file only and drag it to your MicroSD.
6)Once done copying insert your MicroSD in your TP.
7)On your TP open Terminal Emulator at the prompt type SU then enter (hard return) and allow root
8)Type dd if=/Removable/MicroSD/blob of=/dev/block/mmcblk0p4 then enter(hard return)
it will take several minutes then you will see a bunch of number, the records in and records out numbers should be the same (but differs from FW version)
9)Turn your TP off and on again, it will update, took about 10 minutes for me. it will then say Firware update and you should not have lost anything but any hard app or tweak will be restored. You can then update to the latest FW, in my case .21
---------- Post added at 02:51 PM ---------- Previous post was at 02:46 PM ----------
Sorry! are you saying you cant get to the home screen? That at boot up it wont go pass the setup? If thats the case you may need to reinstall your FW but using your PC to install it vice what I discribed above.
yes, i can't get to home screen, i can't pass wizard setup. how can i reinstall the FW? i have only root, and the bootloader is still locked, so i can't use CWM. and to use vipermod to install unlock and CMW i have to set debug usb in settings, bui i can't get to settings.
or i only have to skip setup wizard. when it fails, after clicking ok to the message of failure of the setup, i see the notification bar below with the time, mails from gmail and so on, but only for a moment and if i try to click on it, it doesn't do anything and comes back to the first page of setup. so everything is working on, i only have to reach that skipping wizard setup..
Try a factory reset by inserting a paperclip in the small hold till it "clic" the MicroSD card hopefully it will clear things up
What small hold?
Ok i found it. I tried with a toothpick but nothing. I already did a wipe from stock recovery, will the factory reset do the same thing of the wipe?
Check the development thread for Unbricking and you may want to do searches on how to restore to a fresh FW using your PC and probably Odin software.
is there a way to restore the original firmware in the same way can be done with nvflash, odin or smartflash? i knew not..
I'm not sure, but do some searches you may find something similar.
i found nothing similar to them for tf201. the only ways to reinstall a firmware (with a locked bootloader) need debug usb to use adb, and i can't even get to the settings, or android terminal emulator (just like what you posted yesterday), but i can't go beyond setup wizard and get to the home. i already contacted the assistence, i'm going to send my tablet to them in the following days. they only have to reinstall an original firmware, so it would not be so difficult, long or expensive, i hope. however, thank you for your help
I have messed up my tablet, my tablet is rooted i went and replaced couple of the system apps by using root explorer and that completely made my system go crazy so i then did a system reset and now i keep getting unfortunately, setup wizard had stopped and i cant go anywhere from there. my boot loader is not unlocked. is there any way to reinstall the stock ROM like from adb or something. please any help is appreciated. I have also tried to reset the rom by holding down power and vol down and wipe data from there, and still the same thing. when i plug it in the computer i am still able to see the transformer so i can transfer files to and from the transformer i just cant get it passed the welcome screen.
spencerj2001 said:
I have messed up my tablet, my tablet is rooted i went and replaced couple of the system apps by using root explorer and that completely made my system go crazy so i then did a system reset and now i keep getting unfortunately, setup wizard had stopped and i cant go anywhere from there. my boot loader is not unlocked. is there any way to reinstall the stock ROM like from adb or something. please any help is appreciated. I have also tried to reset the rom by holding down power and vol down and wipe data from there, and still the same thing. when i plug it in the computer i am still able to see the transformer so i can transfer files to and from the transformer i just cant get it passed the welcome screen.
Click to expand...
Click to collapse
Does adb on your computer see your device, since it's not fully booted?
Connect your tablet with USB cable.
On your PC, in the same folder as your adb files, open a command prompt in that location (shift+right click).
Type "adb devices" and see if yours come up as connected.
I doubt it will though, sounds like how I bricked my first prime, when I pushed a deodexed framework to it.
Might also want to try looking in the Dev section, under the how to unbrick your device thread, and see if you can attempt to revert to a different firmware via installing a blob file, but if you can't access your internal or external SD cards, to read/write the blob file (b/c your device won't fully boot) you may be SOL.
Next time unlock the boot loader first an make a nandroid backup, before messing w/ system files, that way you can easily restore. If your still in your 30 day window of purchase, you might consider a quick return/swap... would be the eaisest thing to do.
Sent from my CM7 Atrix 4G
no adb does not see my device but i can access the internal sd card
Swiftks said:
Does adb on your computer see your device, since it's not fully booted?
Connect your tablet with USB cable.
On your PC, in the same folder as your adb files, open a command prompt in that location (shift+right click).
Type "adb devices" and see if yours come up as connected.
I doubt it will though, sounds like how I bricked my first prime, when I pushed a deodexed framework to it.
Might also want to try looking in the Dev section, under the how to unbrick your device thread, and see if you can attempt to revert to a different firmware via installing a blob file, but if you can't access your internal or external SD cards, to read/write the blob file (b/c your device won't fully boot) you may be SOL.
Next time unlock the boot loader first an make a nandroid backup, before messing w/ system files, that way you can easily restore. If your still in your 30 day window of purchase, you might consider a quick return/swap... would be the eaisest thing to do.
Sent from my CM7 Atrix 4G
Click to expand...
Click to collapse
spencerj2001 said:
no adb does not see my device but i can access the internal sd card
Click to expand...
Click to collapse
If you can access the internal card, its weird that adb can't see your device... oh well... try reverting to a earlier/different firmware via a blob. See thread in dev section.
Sent from my CM7 Atrix 4G
i did exactly the same mistake: i uninstalled some system apps (the asus preinstalled apps, with titanium) without unlocking the bootloader, and after a wipe from the stock recovery i'm not able to go beyond setup configuration, it always stops. but i can see and use internal and external memory from my computer. did you find a solution?
Hi there, i've been trying to make some changes to my build.prop (mainly enable miracast...can't believe they would disable it!) and i've had a rather challenging time.
I am now stuck on how to pull the actual build.prop...when i enter the command i get a long list of ADB definitions but no file - at least not that i could find. I tried a few times, including directing the file to be saved on an empty drive in case i could not see it.
I have unlocked my boatloader and installed TWRP. Mounted the system then gone back and entered the commands in ADB....and i don't seem to be having any success. Any help would be appreciated.
thanks
m
Why not just edit it within the built in editors in most file explorers? I use Solid Explorer and it allows me to edit at will within the app itself, no pushing or pulling. Of course I back up my current one before doing anything to it
Tower1972 said:
Why not just edit it within the built in editors in most file explorers? I use Solid Explorer and it allows me to edit at will within the app itself, no pushing or pulling. Of course I back up my current one before doing anything to it
Click to expand...
Click to collapse
i'm not rooted...and i've read that you don't get OTA updates...and it's happened to me more than once that i have an issue with the phone, and i can't get service because it's rooted...
and i guess i thought it was too much trouble to get rooted, make the changes, and then unroot...but i could be wrong at this point?!
You won't get OTA with twrp either. You need stock recovery.
so i bit the bullet and rooted my phone...i was able to get the build.prop editor to work (at first i did not have busybox which it seems helps apps to realize you have root). So now when i go to unable Casting, i can turn it on from the top right of the cast screen, and my tv appears. I can select it and it starts to sync up...then the mircosoft display adapter shows that it's also trying to sync...and then it times out it seems. I've checked it with my tablet and my wife's phone...both work.
any suggestions?
I understand Miracast no longer works in Nougat. I'm still on MM with my 6P and it works, but if you're on 7, you may have lost that feature.
What about WUGS toolkit? Do you need to re rooted for that...ifnot thats what I always use to edit the prop. So much easier as it has most edits you'll make and you just choose.
you never needed to root i edit build.prop like this all the time
1. boot to twrp recovery
2. go to mounts and select system
3. adb pull /system/build.prop
4. make edits
5. adb push build.prop /system/
idk if your edit will work but thats how to do it without root and for some of the other things said in this topic you can ota in twrp but it will fail if modify anything like you just did
Hi Everyone,
I have a phone, the Huawei Ascend P7 -L10.
Some weeks earlier I tried to install Spotify in my phone, but I didn't manage to install it. After several attempts I end up crocking my phone.
It happened when I found some app that had apparent solution to solve Spotify installation problem. I don't remember the name of the app. Anyway, I found it effective so I tried to follow the instructions given. I made it, then the changes were effective. What the app does is to change the phone model and respective carrier.
All the dilemmas started when I decided to restart the phone.
Here goes what I've done so far after the incident.
1. I tried by myself to restore/upgrade the system. I've experience doing this.
2. I took the phone to the 1st Repair Agency - they did not fix it
3. I took to the 2nd Repair Agency - the same thing, they fail to fix it
Note: When you try to restore the phone it gives the following information “update failed!"
and when you normally try to switch the phone on it stop on black screen and nothing else, I've also tried wipe cache, wipe data everything but nothing. Please help!!
Sounds like it might have modified your build.prop (general explanation of build.prop is here: http://forum.xda-developers.com/android/general/explanation-build-prop-values-t3069341). Basically this file found in /system dictates a lot of settings and modes for the phone to do and be in. If you are rooted, then you can view the build.prop with a build.prop editor, text editor, or root enabled file manager. If you aren't rooted, then you will have to see if there is a way to install TWRP recovery or you might be able to use adb if you can still get into your phone's settings. With adb, you should be able to pull the file to your PC then edit it back to the correct info. You might need to see if you can download a rom that will have this info or get someone in the forum for your phone to post it so you can verify that everything is the way it should be. Once that is done then updates should work again. Reason being is that most updates reference the build.prop to make sure it is installing to the correct device to avoid major issues.
es0tericcha0s said:
Sounds like it might have modified your build.prop (general explanation of build.prop is here: http://forum.xda-developers.com/android/general/explanation-build-prop-values-t3069341). Basically this file found in /system dictates a lot of settings and modes for the phone to do and be in. If you are rooted, then you can view the build.prop with a build.prop editor, text editor, or root enabled file manager. If you aren't rooted, then you will have to see if there is a way to install TWRP recovery or you might be able to use adb if you can still get into your phone's settings. With adb, you should be able to pull the file to your PC then edit it back to the correct info. You might need to see if you can download a rom that will have this info or get someone in the forum for your phone to post it so you can verify that everything is the way it should be. Once that is done then updates should work again. Reason being is that most updates reference the build.prop to make sure it is installing to the correct device to avoid major issues.
Click to expand...
Click to collapse
Thanks for your replay. My device is rooted one, but the problem is, I can't login not even connect it via cable (using e.g. HiSuite). So, how can I pick up the file from phone?