Status:
- stock ICS 4.0.4 (system 1) and AUS stock JB 4.1.2 (system 2)
- removed CID
- now want to move AUS stock JB 4.1.2 from system 2 to system 1
Questions:
- Can I directly backup system 2 and restore it on system 1 ??
If AUS stock JB 4.1.2 was moved to system1
- Can I directly restore stock ICS 4.0.4 to system 1 from backup directly ?? Or need to flash with RSD ??
Thanks
williamlaw said:
Status:
- stock ICS 4.0.4 (system 1) and AUS stock JB 4.1.2 (system 2)
- removed CID
- now want to move AUS stock JB 4.1.2 from system 2 to system 1
Questions:
- Can I directly backup system 2 and restore it on system 1 ??
If AUS stock JB 4.1.2 was moved to system1
- Can I directly restore stock ICS 4.0.4 to system 1 from backup directly ?? Or need to flash with RSD ??
Thanks
Click to expand...
Click to collapse
Answer to
Q1) No u shld not do that!
Q2) you can install aus jb 4.1.2 on system 1 fresh and directly....If you do take a backup of system 1 you can restore ur SYSTEM safely as stock on system 1
hrishi21007 said:
Answer to
Q1) No u shld not do that!
Q2) you can install aus jb 4.1.2 on system 1 fresh and directly....If you do take a backup of system 1 you can restore ur SYSTEM safely as stock on system 1
Click to expand...
Click to collapse
- It will not locked by bootloader ?? since some articles written after upgraded to 4.1.2 can't downgrade back to 4.0.4.
- otherwise, do i still need to remove CID even installed aus jb 4.1.2 in system 1 ??
actually I want to use aus jb 4.1.2 in system 1, then flash cm10.2 to system 2 and keep backup of stock ics 4.0.4
williamlaw said:
- It will not locked by bootloader ?? since some articles written after upgraded to 4.1.2 can't downgrade back to 4.0.4.
- otherwise, do i still need to remove CID even installed aus jb 4.1.2 in system 1 ??
actually I want to use aus jb 4.1.2 in system 1, then flash cm10.2 to system 2 and keep backup of stock ics 4.0.4
Click to expand...
Click to collapse
While using Via BMM...You can do all this
4.1.2 on stock slot
& CM10.2 on webtop system partition(system 2 on BMM)
and yes you can backup your 4.0.4 for emergency!
hrishi21007 said:
While using Via BMM...You can do all this
4.1.2 on stock slot
& CM10.2 on webtop system partition(system 2 on BMM)
and yes you can backup your 4.0.4 for emergency!
Click to expand...
Click to collapse
- but for 4.1.2 on stock slot, still need to remove CID ??
- 4.0.4 can return to stock slot ??
williamlaw said:
- but for 4.1.2 on stock slot, still need to remove CID ??
- 4.0.4 can return to stock slot ??
Click to expand...
Click to collapse
You replace the CID becoz u change the region of the ROM that is flashed on ur phone..
E.g. a asian razr wont need to remove CID if the ROM was based up of Asian Stock system base...
but if asian razr is to be flashed with US based Rom...u need to remove CID...
i hope that clears your CID doubts
yes you can return back to stock if u need but do keep in mind to restore the CID when u do!
hrishi21007 said:
You replace the CID becoz u change the region of the ROM that is flashed on ur phone..
E.g. a asian razr wont need to remove CID if the ROM was based up of Asian Stock system base...
but if asian razr is to be flashed with US based Rom...u need to remove CID...
i hope that clears your CID doubts
yes you can return back to stock if u need but do keep in mind to restore the CID when u do!
Click to expand...
Click to collapse
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
williamlaw said:
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
Click to expand...
Click to collapse
If you flash JB with RSD Lite then you can't go back to ICS.
But if you flash roms with BMM (with CID erased),then you can do whatever you want.
Sent from my Razr XT910
williamlaw said:
- ok, i have understood the purpose of CID.
- how about bootloader ? moto not locked it then we can't downgrade to earlier version rom ??
Click to expand...
Click to collapse
If you have BMM installed on ur RAZR...u can switch 4.0.4 to 4.1.2 and beyond and back till 4.0.4
Thanks All !!
welder73 said:
If you flash JB with RSD Lite then you can't go back to ICS.
But if you flash roms with BMM (with CID erased),then you can do whatever you want.
Sent from my Razr XT910
Click to expand...
Click to collapse
one more question, if i backup from system 1, then MUST restore it on system 1 ?? I can't restore on other system 2,3,4 ??
thanks
ogerors seen
Good to know, understand, I'm learning a lot with you
Related
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
jaazii said:
Hi guys, i updated my GT-19100_CHN_CHN 2.3.6 to 4.0.4 through android paranoid1.4 rom but i don't like 4.0.4 because of alot of bugs in it.
Is there any solution that i can restore back to my old official version 2.3.6 Thanks for help in advance.
Click to expand...
Click to collapse
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
how to flash a stock 2.3.6??? i don't know. am new to it
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Download Odin (can be found in this forum)
Download your stock firmware 2.3.6 (I dont know about the CHN_CHN Version)
Put your phone into Download Mode. (Power Off, Hold volume down+home+power button)
Run Odin
Choose PDA file which is your stock firmware.
Flash
jaazii said:
how to flash a stock 2.3.6??? i don't know. am new to it
Click to expand...
Click to collapse
Use search.. You will find lots of topics,, Anyways, following link will guide you :
http://forum.xda-developers.com/showthread.php?t=1110160
IMPORTANT : While choosing model from the dropdown on Checkfusdownloader, choose "GT-I9100G"... Do not choose "GT-I9100".
相信你是个中国人，要不然应该不能买到中国版的9100G。
用Odin刷5文件包吧…………
can any one please give me the link of android 2.3.6 rom for i9100G ???
jaazii said:
can any one please give me the link of android 2.3.6 rom for i9100G ???
Click to expand...
Click to collapse
try this..http://forum.xda-developers.com/showthread.php?t=1533091
..and try to find ur needs..
iXanza said:
Flash a stock 2.3.6 GB Firmware through Odin. and you're done
Click to expand...
Click to collapse
I tried this before when I first flashed to CM9, I get bootloops. Since then, I forever stick to ICS and never trying to convert back to GB although I wish to do so. I dare not and i'm lazy to deal with the bootloops.. I not sure why I get bootloops btw, some other ppl faced that as well. So I hope this brother able to convert back to GB successfully. Good luck.
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
GoZoU1 said:
To convert back to GB you have to flash an old GB bootloader for some reason after flashing the stock ROM. After that do a full wipe, everything else ended up in a bootloop for me.
Fingers crossed .
Sent from my Galaxy S II using Tapatalk 2
Click to expand...
Click to collapse
So end up you success? Would you mind to share the old GB bootloader? Not the stock rom. Is the particular bootloader. Thanks!!
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
GoZoU1 said:
Yes I succeeded converting back to GB stock ROM, now I'm on french ICS.
Here is the bootloader for german xxlb1 GB 2.3.6: http://uploadmirrors.com/download/0S0I4G2U/Bootloader_XXLB1.tar
Click to expand...
Click to collapse
I can flash GB stock GDZKL3 after flashing this bootloader right? bootloader should flash before flashing rom, or after flashing the rom? Thanks.
I tried both options. Try flashing the bootloader at first but don't forget to uncheck "Auto-Reboot" in odin. After that you should be able to flash the stock GB ROM. Do you have a jig just in case of any problems? I remember I used my jig, but don't really know why.
Gesendet von meinem GT-I9100G mit Tapatalk 2
Development section is mean to release Rom. kernels, mods, etc. Not ask questions or making threads for help. Moved to Q&A
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
artur0588 said:
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
Click to expand...
Click to collapse
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
heblu said:
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
Click to expand...
Click to collapse
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
artur0588 said:
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
Click to expand...
Click to collapse
Great. In the next few hours I'll be back
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Any noticeable changes ?
Like my work visit my channel once on YouTube
YouTube.com/user/Therazrguy
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
hmm im installing it on rom 2, and rom 1 is JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
danieltang34 said:
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
Click to expand...
Click to collapse
You forgot flash new kernel
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
danieltang34 said:
hmm im installing it on rom 2, and rom 1 is based JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
Click to expand...
Click to collapse
first reboot to BMM recovery and flash kernel from OP. then wipe all and install rom
Lzto1320 said:
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
Click to expand...
Click to collapse
I have attached in OP
artur0588 said:
i have attached in op
Click to expand...
Click to collapse
tks so much for your work! Great man!!!
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
This is from the soak test I believe.
hansip87 said:
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Click to expand...
Click to collapse
al good
after you have backup CID and your kernel you can restore them just to be sure
you can flash rom in second system (webtop partition). To switch, reboot into BMM, flash desired kernel, reboot
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
yes
heblu said:
yes
Click to expand...
Click to collapse
i have a sily question. can we dual boot this rom and flash kernel separately becouse i donnt want to lose my stock rom ics and all apps.
one more question is there a way to backup my whole rom and restore as it is when i want .?
one question more ics will not work on jelly bean kerne.?
thanx in advance for answer my silly question
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
PatrickDziura said:
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
Click to expand...
Click to collapse
Yes, original.
Hello
Like many people here with a LATAM phone or a NA phone (Rogers, Fido in Canada, Puerto Rico...) i have no patience in the update... and decided to flash all previous JB roms (china, australia, retail europe... ) to stay update and have the great Jelly Bean installed on the phone... (my CID was erased and a backup have been made ... )
Now JB is available in LATAM ... ( via the retail brasil Blur_Version.982.124.17.XT910)
Just want make a little step to step to help some people here to restore your LATAM device with the retail brasil... and if you want... restore your CID...
One... you must be rooted... and have BMM (BOOT MENU MANAGER installed)
You need 3 files...
The brazil kernel (thanks to Al936) : http://www.m1rr0r.com/kernel/bootimgg3fd3f14.zip
The brazil baseband : http://www.m1rr0r.com/bp/U_1C.76.10P.zip
The rom ( this is the deodexed rom - thanks to fabiobatera ) : http://d-h.st/H2x
If you want odexed (thanks to AI936) : https://mega.co.nz/#!8gokAB6a!G3rmsQuIHMshb7Vyw_QjLwo4jmcuRHjkNAqIo6qSc30
Your CID...
Two...
Backup your file
Three..
Go to the bmm recovery...
Wipe all data...
Format system...
Flash the kernel... ( don't need to flash it with the
Flash the radio files...
Restore the rom (deodexed) via system restore... or Install the rom (odexed) via Install zip package
Restore your cid...
Reboot...
If you choose the odexed version... your phone is now just like a default factory latam phone with JB on it (good if you need to repair your phone...or sold to noob )
:good:
Unbrick : Use the LATAM kernel for many use... exemple : Unbrick your latam device if you have flashed EMEA kernel without delete your CID... etc...
thank you. Are we able to root this version?
I have bmm on the razr... If you have bmm you can root any jb version... Just installed the supersu binary via bmm ? Need a steep to steep ?
If you don t have bmm installed... You can t root the br retail version ;(
Sent from my XT910 using xda premium
By.TRabZonLu™ said:
thank you. Are we able to root this version?
Click to expand...
Click to collapse
Lolz don't bother for root on every thread i know ya lost ya root access and stuck to stock .EU karnel . Please be patience we ll get root exploit very soon brother:thumbup:
Hit the thx button if i helped ya in anyways
o2qc418 said:
Hello
Like many people here with a LATAM phone or a NA phone (Rogers, Fido in Canada, Puerto Rico...) i have no patience in the update... and decided to flash all previous JB roms (china, australia, retail europe... ) to stay update and have the great Jelly Bean installed on the phone... (my CID was erased and a backup have been made ... )
Now JB is available in LATAM ... ( via the retail brasil Blur_Version.982.124.17.XT910)
Just want make a little step to step to help some people here to restore your LATAM device with the retail brasil... and if you want... restore your CID...
One... you must be rooted... and have BMM (BOOT MENU MANAGER installed)
You need 3 files...
The brazil kernel (thanks to Al936) : http://www.m1rr0r.com/kernel/bootimgg3fd3f14.zip
The brazil baseband : http://www.m1rr0r.com/bp/U_1C.76.10P.zip
The rom ( this is the deodexed rom - thanks to fabiobatera ) : http://d-h.st/H2x
If you want odexed (thanks to AI936) : https://mega.co.nz/#!8gokAB6a!G3rmsQuIHMshb7Vyw_QjLwo4jmcuRHjkNAqIo6qSc30
Your CID...
Two...
Backup your file
Three..
Go to the bmm recovery...
Wipe all data...
Format system...
Flash the kernel... ( don't need to flash it with the
Flash the radio files...
Restore the rom (deodexed) via system restore... or Install the rom (odexed) via Install zip package
Restore your cid...
Reboot...
If you choose the odexed version... your phone is now just like a default factory latam phone with JB on it (good if you need to repair your phone...or sold to noob )
:good:
Unbrick : Use the LATAM kernel for many use... exemple : Unbrick your latam device if you have flashed EMEA kernel without delete your CID... etc...
Click to expand...
Click to collapse
This worked like a charm, thank you!
I hope this official rom improves the battery life of my razr maxx, i noticed that razr maxx battery life decreased in Verizon leak, maybe beacuse LTE/CDMA might be activated the whole time, am I right??
Forwarded from my other thread post http://forum.xda-developers.com/showthread.php?t=2473982 , I have 2 questions.
1. Which thread guide me to flash to custom rom straight way from HC 3.2 stock samsung 10.1 P7510 to JellyBean custom roms ? including Nandroid backup ?
What I know , flashing from 3.2 to 4.1 method must be in a correct step avoiding brick or I Should use the traditional method , 3.2 to ICS then Jelly bean ? such as kernals base issue ?
2. There are so many custom roms avaliable. I would like to know , which rom works the best with compatibility and smooth UI ? Camera fix and etc ?
Appreciate any help
xdadfm said:
Forwarded from my other thread post http://forum.xda-developers.com/showthread.php?t=2473982 , I have 2 questions.
1. Which thread guide me to flash to custom rom straight way from HC 3.2 stock samsung 10.1 P7510 to JellyBean custom roms ? including Nandroid backup ?
What I know , flashing from 3.2 to 4.1 method must be in a correct step avoiding brick or I Should use the traditional method , 3.2 to ICS then Jelly bean ? such as kernals base issue ?
2. There are so many custom roms avaliable. I would like to know , which rom works the best with compatibility and smooth UI ? Camera fix and etc ?
Appreciate any help
Click to expand...
Click to collapse
First...to which ROM is the best...depends on you're style and device. All devices aren't equal...even when they are the same variant.But I like the 4.3 ROMs.Look at my SIG to see which one I'm running today...Lol.
Now..on to you're rooting. You most definitely need to update to 4.0.4 ICS..I have a guide after you're on that version so you can root and stay stock or flash a custom ROM.But you need the ICS boot loader to flash almost all of the new jelly bean ROMs, if not all of them.I believe when you do the official update from kies it will install that boot loader.( never had to as my device was on 4.0.4 unrooted ).
Back up you're tab to you're PC before you go updating..The update might wipe sdcard, not sure. And in case the update goes side ways on ya.
Let me know if you need any help.
Gil81 said:
First...to which ROM is the best...depends on you're style and device. All devices aren't equal...even when they are the same variant.But I like the 4.3 ROMs.Look at my SIG to see which one I'm running today...Lol.
Now..on to you're rooting. You most definitely need to update to 4.0.4 ICS..I have a guide after you're on that version so you can root and stay stock or flash a custom ROM.But you need the ICS boot loader to flash almost all of the new jelly bean ROMs, if not all of them.I believe when you do the official update from kies it will install that boot loader.( never had to as my device was on 4.0.4 unrooted ).
Back up you're tab to you're PC before you go updating..The update might wipe sdcard, not sure. And in case the update goes side ways on ya.
Let me know if you need any help.
Click to expand...
Click to collapse
Getting to the safe side , the best is using traditional flashing to ICS then to JB.
I am currently rooted for HC.The ordering , I need to flash it to samsung ICS first ? which mean , I need to unroot my device ?
Or I can just flash to custom roms ICS ?
Currently , stuck at this point.Which is the correct procedure ?
Flash stock ICS first using Odin first. Then you can flash to any version you want.
Sent from my GT-P7500 using Tapatalk HD
xdadfm said:
Getting to the safe side , the best is using traditional flashing to ICS then to JB.
I am currently rooted for HC.The ordering , I need to flash it to samsung ICS first ? which mean , I need to unroot my device ?
Or I can just flash to custom roms ICS ?
Currently , stuck at this point.Which is the correct procedure ?
Click to expand...
Click to collapse
Just as eushaun99 said...flash ICS with Odin..
eushaun99 said:
Flash stock ICS first using Odin first. Then you can flash to any version you want.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
Gil81 said:
Just as eushaun99 said...flash ICS with Odin..
Click to expand...
Click to collapse
Sorry for the newbie question.Flash with stock Samsung ICS ? I am rooted , do I need to unroot before flashing or just directly flash it with stock Samsung ICS via Odin? Correct Stock Samsung ICS rom http://forum.xda-developers.com/showthread.php?t=1831040 ?
xdadfm said:
Sorry for the newbie question.Flash with stock Samsung ICS ? I am rooted , do I need to unroot before flashing or just directly flash it with stock Samsung ICS via Odin? Correct Stock Samsung ICS rom http://forum.xda-developers.com/showthread.php?t=1831040 ?
Click to expand...
Click to collapse
No. Just flash it with Odin. Don't use that ROM. That is a modified version. Download the stock ROMs at www.sammobile.com.
Sent from my GT-P7500 using Tapatalk HD
Take a look at the One Stop FAQ and I've got links and stuff for flashing stock ICS
http://forum.xda-developers.com/showthread.php?t=2458846
Sent from my GT-P7510 using Tapatalk HD
Hi. Im very New to Rooting kind of stuff..
My Motorola Razr maxx was good in STOCK GB 2.3.6 ( 65.1.40.XT910.PSHAsiaRetail.en.03 )
I UPDATED ( OTA ) to ICS 4.0.4. This ROM really sucks. I jus wanna roll back to Stock GB.
I somehow got the Official ROM of GB. Pls guide me wat should be done next.
I really dont care bricking my phone or any stuff.. I need the GINGERBREAD Back.
tHANKS IN ADVANCE
you cannot downgrade stock android version
Sent from my XT907 using Tapatalk
Actually i got d info that, by Rooting the Phone and then installing SAFESTRAP, i can install custom ROM. is that so ?
Or is there any way i can unlock the bootloader and then install Custom ROM GB ??
srikanth786 said:
Actually i got d info that, by Rooting the Phone and then installing SAFESTRAP, i can install custom ROM. is that so ?
Or is there any way i can unlock the bootloader and then install Custom ROM GB ??
Click to expand...
Click to collapse
yes, you can root and install a custom rom, I don't know if there any custom gingerbread roms that will work.
GB Failed
sd_shadow said:
yes, you can root and install a custom rom, I don't know if there any custom gingerbread roms that will work.
Click to expand...
Click to collapse
I installed SAFESTARP and then created a partition.
Selected the ZIP FILE ( GB ROM ) and gave INSTALL.
It says error. is there any way can i unlock the Bootloader ????
srikanth786 said:
I installed SAFESTARP and then created a partition.
Selected the ZIP FILE ( GB ROM ) and gave INSTALL.
It says error. is there any way can i unlock the Bootloader ????
Click to expand...
Click to collapse
No,there isn't.
And you can't flash stock rom with SS...or any custom GB rom because you're on ICS.
Try Liquidsmooth Milestone version,that's Kitkat 4.4.4
Sent from my Razr XT910