So when you go to the cyanogenmod mightlies page
hxxp://mirror.kanged.net/cm/nightly/liberty/
change xx for tt
do you download the .zip or the .zip.md5sum.txt?
Thanks for the help.
Grab the .zip . The md5sum.txt contains the MD5 hash...which is one method to verify that you've downloaded the full file.
http://en.wikipedia.org/wiki/MD5
Then, you flash the .zip
You want just the zip. The md5sum is just a verification for you to see if what you downloaded is what you think you downloaded.
You can run md5sum on the zip and compare your results to the md5sum file from the repo.
HTH
Sent from my Liberty using XDA App
Thanks alot. I knew I could count on xda for this question
Sent from my Liberty using XDA App
I'd like to say I know what I'm doing but now im second guessing myself. When I unzip the EC01 radio file to use in odin, it unzips as modem.bin. Is that correct? I thought all files had to unzip to .tar.md5 in order to flash via odin. Any help or clarification would be appreciated.
If its odin its going to be a .tar file or MD5 file.
You don't extract the files. Just push the file in odin.
Sent from my SCH-I500 using XDA Premium App
ezas said:
If its odin its going to be a .tar file or MD5 file.
You don't extract the files. Just push the file in odin.
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
+1. Just load it in Odin, do not unzip. The way it comes, it is ready for Odin.
You only unzip if the file has .zip at the end... i noticed myself that the icon for the file is the same sometimes (stack of books) whether its .tar or .zip
Sent from my Superclean Voodoo Fascinate
Thanks!
ziggy484 said:
You only unzip if the file has .zip at the end... i noticed myself that the icon for the file is the same sometimes (stack of books) whether its .tar or .zip
Sent from my Superclean Voodoo Fascinate
Click to expand...
Click to collapse
Thank you all:
I tried approximately 22 times to install from multiple sources but the zip file is just not showing up!!!!! Can someone please help or give a step by step guide? I really want this ROM on my phone
You need to expand the rar file you've downloaded to extract the zip inside. Place that zip on your external then it should show
Sent from my SGH-I777 using xda premium
Tiplite2004 said:
You need to expand the rar file you've downloaded to extract the zip inside. Place that zip on your external then it should show
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
can you expand on that? I don't fully understand what you mean
Then get out of here lol
Sent from my SAMSUNG-SGH-I777 using XDA App
Here, i made the zip for you http://www.megaupload.com/?d=HFFEYG2Y. Just download boot into recovery and you should see it.
The reason your phone couldn't find it before is because it was in a RAR format and when in CWM only ZIPS are recognized for installing
Sent from my SGH-I777 using xda premium
it still didn't show up
abraxo said:
it still didn't show up
Click to expand...
Click to collapse
I've seen this type of download before and it says the zip itself (named boot) is a .img and when I put it into the SD it shows up as a very small (4,000 KB) zip file. it doesn't show up in CWM.
Did you try repacking it as zip?
I have been doing a lot of restoring, it would be nice to just be able to push the flash rather than geting an os installed, installing a recovery and then recovering.
I saw something for another samsung device and it involved dd'ing files and then putting them into a tar. but i suspect the /dev/xxxxxx files would be a different name on the GT10.1?
Thanks
Rob
I've tried opening a tar file before, in it was all .img files eg. system.img, boot.img and so on. So my guess is you have to create the .img files, tar them up and flash via Odin.
Sent from my GT-P7500 using XDA Premium HD app
eushaun99 said:
I've tried opening a tar file before, in it was all .img files eg. system.img, boot.img and so on. So my guess is you have to create the .img files, tar them up and flash via Odin.
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Right, but they are dumps of the /dev/system|recovery|... file systems from using dd to get a binary image, they are not the files like in a zip. which is why, if my reading is correct, zips actually get processed (extracted and moved) and the files in the odin.tar are binary dumps and they just get splatted back out into the file system like a Norton Gost restore. The trick is knowing which /dev/xxxx/ systems to pickup. I found a link right before leaving for work that seems to suggest if I get rooted and busybody on, I should be able to run an fdsik -l and get a list of the partitions.
I just got the stupid tablet back to stock ICS 4.04 this morning after running updates last night, so I hope to have some time play today.
I was just gonna make this little tutorial to take some work off of The actual Dev for the Project(Beastmode) thanks again for your work brother
In his newest alpha release of safe strap we're able to replace the stock rom slot with a 4.3 Touchwiz ROM, I have seen people report that they have flashed certain roms without having to do any modification, but this is a safety precaution.
First you will need your rom of choice, in this tutorial I'm using N3BULA.
Download the rom and extract the contents to a folder on your pc or phone, PC is much easier, but you can edit on your phone as well
The files you need to edit are under META-INF/COM/GOOGLE/ANDROID that's actually the only files
Im using his modified files from the dev thread for comparison.
First we'll open the Aroma-Config
http://forum.xda-developers.com/attachment.php?attachmentid=2650078&stc=1&d=1395786107
Pardon the crude screen shot method but this will show you the changes and where they are.
Modified is on the left and Stock that came with the rom is on the right. Make the Changes and save
Next is Updater-Script
Same crude method of screen shot
http://forum.xda-developers.com/attachment.php?attachmentid=2650086&stc=1&d=1395786357
you can see where the two differ, so just edit that out as well.
Left is modified, Right is stock
Save Changes
Edit 3/26 you can also delete boot.img in zip
Make sure these files are on external sd card as well as the rom, boot into recovery, always make a nandroid backup, wipe and flash.\
This is the first time I have made a tutorial, so if its rough around the edges please excuse my forum newbness
if I missed anything definitely feel free to add, and once again A HUGE THANK YOU BEASTMODE.
Hopefully in a few hours or days these edits wont be needed.
how do we go about putting them into the rom zip file?
You edit them in the rom zip file... extract the rom and it moves as a zip, my case was it downloaded to storage sdcard (internal). I extracted it to ext sdcard and then went in and edited it. It still remains a zip
Sent from my SCH-I605 using Tapatalk
Easy way is to use 7 zip. Extract the ROM and make the changes. Now right click on original ROM and select open archive. From there u can place the modded files. Now the ROM.zip is still flashable.
Sent from my LG-VS980 using xda app-developers app
of course as soon as i posted it, i figured it out, unfortunately i can't get alliance to work afterwards, it installs but doesn't boot
I'm using alliance atm on safestrap. Don't mod anything. Just choose the stock kernel when you get to that point in the installer.
So glad to see you post that.!!! Been talking to a guy about it for about 2 hrs about it now, I actually told him it should work as long as agni wasn't chosen, thanks for clarification
Sent from my SCH-I605 using Tapatalk
I tried and unedited version of alliance and it tripped Knox and I had to odin anyone got an edited version with out kernel that they know works
Sent from my SCH-I605 using Tapatalk
In my nebula zip I have a file on the root called boot.img should I delete this file as well?
Sent from my SCH-I605 using Tapatalk
It wouldn't hurt. The script edits disregard it but just to be safe you can
Sent from my SCH-I605 using Tapatalk
I don't get it I edited the zips and then when i try to flash in recovery it just says failed? it doesn't give me a specific reason. This is for n3bula rom. But i extracted using winrar, deleted boot.img, changed the aroma config and updated zip using wordpad, zipped the rom and it doesn't seem to work. is there something i'm doing wrong?
HerroMoto said:
I don't get it I edited the zips and then when i try to flash in recovery it just says failed? it doesn't give me a specific reason. This is for n3bula rom. But i extracted using winrar, deleted boot.img, changed the aroma config and updated zip using wordpad, zipped the rom and it doesn't seem to work. is there something i'm doing wrong?
Click to expand...
Click to collapse
After you deleted the boot.img there is no point in editing the rest. I used 7zip to unzip and rezip and have not had any problems yet. Winrar might be causing problems for all i know as i never use it. I'm not around my pc for the most part atm but i haven't had any problems flashing 4 or 5 roms with just deleting the boot.img.
roflcoptersoisoi said:
After you deleted the boot.img there is no point in editing the rest. I used 7zip to unzip and rezip and have not had any problems yet. Winrar might be causing problems for all i know as i never use it. I'm not around my pc for the most part atm but i haven't had any problems flashing 4 or 5 roms with just deleting the boot.img.
Click to expand...
Click to collapse
I ended up fixing it. I tried doing it through winrar and from root explorer on my phone. The way I got it to work was actually downloading the aroma-config file and uodater-script file from the development thread that beast mode provided and changed those. He happened to use nebula as well so everything is working great
Sent from my SCH-I605 using Tapatalk
Ive tried n3bula alliance and jediwiz(?) And all have worked out for me need some time to work SS!! Lol
Sent from my SCH-I605 using Tapatalk
So I have to delete stuff in the updater script and the boot.img correct? I opened the updater script in notepad and it looked nothing like that..
trying to install Jett rom and im not sure what will happen when I delete that kernel line..
already deleted boot.img
Just delete the boot.img nothing else
Sent from my SCH-I605 using Tapatalk
hggadm3 said:
Just delete the boot.img nothing else
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Excellent. Thank you!!!
Sorry for the dumb question but what do I do if the rom of choice isn't showing up on the root of my extSD?
EDIT:
Nevermind, to anyone who saw my last post(s), I'm an idiot .
Ran through Odin, re-rooted, re-installed Safestrap, now installing N3bula Rom.
Hope all goes well. And sorry for any inconvenience!
Hope my donation helped out some Beastmode!