I was just gonna make this little tutorial to take some work off of The actual Dev for the Project(Beastmode) thanks again for your work brother
In his newest alpha release of safe strap we're able to replace the stock rom slot with a 4.3 Touchwiz ROM, I have seen people report that they have flashed certain roms without having to do any modification, but this is a safety precaution.
First you will need your rom of choice, in this tutorial I'm using N3BULA.
Download the rom and extract the contents to a folder on your pc or phone, PC is much easier, but you can edit on your phone as well
The files you need to edit are under META-INF/COM/GOOGLE/ANDROID that's actually the only files
Im using his modified files from the dev thread for comparison.
First we'll open the Aroma-Config
http://forum.xda-developers.com/attachment.php?attachmentid=2650078&stc=1&d=1395786107
Pardon the crude screen shot method but this will show you the changes and where they are.
Modified is on the left and Stock that came with the rom is on the right. Make the Changes and save
Next is Updater-Script
Same crude method of screen shot
http://forum.xda-developers.com/attachment.php?attachmentid=2650086&stc=1&d=1395786357
you can see where the two differ, so just edit that out as well.
Left is modified, Right is stock
Save Changes
Edit 3/26 you can also delete boot.img in zip
Make sure these files are on external sd card as well as the rom, boot into recovery, always make a nandroid backup, wipe and flash.\
This is the first time I have made a tutorial, so if its rough around the edges please excuse my forum newbness
if I missed anything definitely feel free to add, and once again A HUGE THANK YOU BEASTMODE.
Hopefully in a few hours or days these edits wont be needed.
how do we go about putting them into the rom zip file?
You edit them in the rom zip file... extract the rom and it moves as a zip, my case was it downloaded to storage sdcard (internal). I extracted it to ext sdcard and then went in and edited it. It still remains a zip
Sent from my SCH-I605 using Tapatalk
Easy way is to use 7 zip. Extract the ROM and make the changes. Now right click on original ROM and select open archive. From there u can place the modded files. Now the ROM.zip is still flashable.
Sent from my LG-VS980 using xda app-developers app
of course as soon as i posted it, i figured it out, unfortunately i can't get alliance to work afterwards, it installs but doesn't boot
I'm using alliance atm on safestrap. Don't mod anything. Just choose the stock kernel when you get to that point in the installer.
So glad to see you post that.!!! Been talking to a guy about it for about 2 hrs about it now, I actually told him it should work as long as agni wasn't chosen, thanks for clarification
Sent from my SCH-I605 using Tapatalk
I tried and unedited version of alliance and it tripped Knox and I had to odin anyone got an edited version with out kernel that they know works
Sent from my SCH-I605 using Tapatalk
In my nebula zip I have a file on the root called boot.img should I delete this file as well?
Sent from my SCH-I605 using Tapatalk
It wouldn't hurt. The script edits disregard it but just to be safe you can
Sent from my SCH-I605 using Tapatalk
I don't get it I edited the zips and then when i try to flash in recovery it just says failed? it doesn't give me a specific reason. This is for n3bula rom. But i extracted using winrar, deleted boot.img, changed the aroma config and updated zip using wordpad, zipped the rom and it doesn't seem to work. is there something i'm doing wrong?
HerroMoto said:
I don't get it I edited the zips and then when i try to flash in recovery it just says failed? it doesn't give me a specific reason. This is for n3bula rom. But i extracted using winrar, deleted boot.img, changed the aroma config and updated zip using wordpad, zipped the rom and it doesn't seem to work. is there something i'm doing wrong?
Click to expand...
Click to collapse
After you deleted the boot.img there is no point in editing the rest. I used 7zip to unzip and rezip and have not had any problems yet. Winrar might be causing problems for all i know as i never use it. I'm not around my pc for the most part atm but i haven't had any problems flashing 4 or 5 roms with just deleting the boot.img.
roflcoptersoisoi said:
After you deleted the boot.img there is no point in editing the rest. I used 7zip to unzip and rezip and have not had any problems yet. Winrar might be causing problems for all i know as i never use it. I'm not around my pc for the most part atm but i haven't had any problems flashing 4 or 5 roms with just deleting the boot.img.
Click to expand...
Click to collapse
I ended up fixing it. I tried doing it through winrar and from root explorer on my phone. The way I got it to work was actually downloading the aroma-config file and uodater-script file from the development thread that beast mode provided and changed those. He happened to use nebula as well so everything is working great
Sent from my SCH-I605 using Tapatalk
Ive tried n3bula alliance and jediwiz(?) And all have worked out for me need some time to work SS!! Lol
Sent from my SCH-I605 using Tapatalk
So I have to delete stuff in the updater script and the boot.img correct? I opened the updater script in notepad and it looked nothing like that..
trying to install Jett rom and im not sure what will happen when I delete that kernel line..
already deleted boot.img
Just delete the boot.img nothing else
Sent from my SCH-I605 using Tapatalk
hggadm3 said:
Just delete the boot.img nothing else
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Excellent. Thank you!!!
Sorry for the dumb question but what do I do if the rom of choice isn't showing up on the root of my extSD?
EDIT:
Nevermind, to anyone who saw my last post(s), I'm an idiot .
Ran through Odin, re-rooted, re-installed Safestrap, now installing N3bula Rom.
Hope all goes well. And sorry for any inconvenience!
Hope my donation helped out some Beastmode!
Related
Think I fudged up. Installed the updated cwmfroyo from jt1134 yesterday. Looked in Rom manager and it said there was an updated CWR to flash.
Cant get into recovery now.
Trying to fix.
[update]
couldnt push old cwm on the device
gotta nuke it. odin dlo9/old cwm/flash froyo/newcwm/blackhole rom/nandroid data restore.
dont be me.
I installed VIA rom manager with out any issues, but i didn't not click the flash clockwork inside rom manager after.
Same happened here
Sent from my SCH-I500 using XDA App
What you need is someones working update.zip
Sent from my SCH-I500 using XDA App
crap I just did this...anyone want to post their working update.zip please?
jfishh said:
crap I just did this...anyone want to post their working update.zip please?
Click to expand...
Click to collapse
heres ya go:
http://forum.xda-developers.com/showthread.php?t=942021
gunnermike said:
heres ya go:
http://forum.xda-developers.com/showthread.php?t=942021
Click to expand...
Click to collapse
Since those affected by this problem will not be able to flash this cwm zip, note that you can extract the update.zip out of the /sdcard/ directory in the cwm zip. Replacing that may work out...
wizang said:
Since those affected by this problem will not be able to flash this cwm zip, note that you can extract the update.zip out of the /sdcard/ directory in the cwm zip. Replacing that may work out...
Click to expand...
Click to collapse
Delete the existing update.zip file and replace with working update.zip file.
Link attached.
http://dl.dropbox.com/u/17566514/update.zip
i tried that. i had it on my pc. didnt work.
i just started from DL09 and worked it back up to blackhole 4.1
works just fine now.
Take the fixed CWM update.zip from the above post. Drop a copy on your sd card. Copy it into the clockworkmod folder and rename the copy recovery-update.zip. Will work on both ends then.
Daswolven said:
Take the fixed CWM update.zip from the above post. Drop a copy on your sd card. Copy it into the clockworkmod folder and rename the copy recovery-update.zip. Will work on both ends then.
Click to expand...
Click to collapse
I've replaced update.zip with working version, flashed JT's modified version, copied and renamed to CWM folder.
It now goes directly to modified Red recovery.
Thank you for the useful info.
meeeeee too
Thanks Daswolven, worked like charm.
Sent from my SCH-I500 using XDA App
Lol. Thank Adrynalyn. He clued in on it in another post.
Sent from my SCH-I500 using XDA App
i tried that and i get the same error and when i run it in odin it just sticks on the samsung screen and odin says passed but i still have the error can i reflash back to dj05 and re work everything
EDIT all good its working now
Hey all.
Been searching XDA and Google for anything on the original framework-res.apk file for the EVO3D.
I dont know what happened but after I flashed this zip from recovery, I rebooted and only see the top status/battery/timebar. NOTHING ELSE. Power button activates screen only...no lockscreen, just black screen and top bar.
Can anyone lend a hand and help me figure out if this can be reversed or uninstalled? Phone works....just cant see the screen to take calls.
Much thanx in advance.
Just download the stock ROM on your computer and pull the original apk from it. Or download the ROM you fiddled with, and pull its apk from there. You can also just try reinstalling the ROM. Or reflash it over. Just clear cache and Dalvik, then flash.
Oh and post this is Q&A next time, or the hall monitors will come and give you a ticket. Oh, and I forgot to mention a tongue lashing.
I also forgot to mention to be aware of the troll patrols. They'll troll you alive!
Sent from my PG86100 using XDA App
DDiaz007 said:
Just download the stock ROM on your computer and pull the original apk from it. Or download the ROM you fiddled with, and pull its apk from there. You can also just try reinstalling the ROM. Or reflash it over. Just clear cache and Dalvik, then flash.
Oh and post this is Q&A next time, or the hall monitors will come and give you a ticket. Oh, and I forgot to mention a tongue lashing.
I also forgot to mention to be aware of the troll patrols. They'll troll you alive!
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Thanx. Im downloading the stock rooted rom now.
The only reason I posted here was that the zip was a battery modification that for the life of me, I cant seem to remember where I got it from. Considering that it was a mod, I figured it would make sense in Themes and Apps...also figuring in that if someone who had used it as well would have knowledge of uninstall/removal.
Download's done. Will let u know if it worked. Thanx again DDiaz007!
zagman said:
Thanx. Im downloading the stock rooted rom now.
The only reason I posted here was that the zip was a battery modification that for the life of me, I cant seem to remember where I got it from. Considering that it was a mod, I figured it would make sense in Themes and Apps...also figuring in that if someone who had used it as well would have knowledge of uninstall/removal.
Download's done. Will let u know if it worked. Thanx again DDiaz007!
Click to expand...
Click to collapse
If your going to do a clean install. Your going to want to wipe...
Dalvik Partition
Cache partition
Data partition
System partition
Sent from my PG86100 using XDA App
DDiaz007 said:
If your going to do a clean install. Your going to want to wipe...
Dalvik Partition
Cache partition
Data partition
System partition
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
I understand that DD. I don't plan on doing a clean install. After all, I do have a backup from about a week ago that I could restore in Clockwork as a last resort. But seeing as I have done some installs and the backup is a week old, I wanted to see if this zip can be uninstalled. I found out its from Team Xron and I downloaded it on 7/20, 5 days after I got my 3D.
My confusion gets worse now that I see that when I flashed the zip, (its contents included below) it had a META-INF file besides the .apk file. And comparing the 2 META-INF files from here and the stock Rom...they differ in size, and contents. The stock ROM META-INF does not include the RSA, SF, & MF file as does the Mod zip. Also the binary and script files differ in size.
How would u suggest going about changing it back? Should I put the .apk on my sd and push it using ADB? OR create a zip with the Stock .apk and META-INF and flash it in Clockwork Recovery as I did initially?
META-INF / CERT.RSA RSA File 1.7 KB
META-INF / CERT.SF SF File 382 bytes
META-INF / MANIFEST.MF MF File 329 bytes
META-INF / com / google / android / update-binary File 249.9 KB
META-INF / com / google / android / updater-script File 196 bytes
framework / framework-res.apk APK File 3.0 MB
creating a zip with the Stock .apk and META-INF and flash it in Clockwork Recovery was unsuccessful.
"Installing Evo 3D base rom 1.0
unpacking system..
symlinks & pemissions...
"installing kernal...
assert failed: package_extract_file("boot.img. "/tmp/boot.img")
E: error in /sdcard/download/xxx.zip
(Status 7)
Installation aborted."
Although I backed up in CWM....think im just gonna restore back to last week. If i get a wild hair and some good tech support from Xron, I might flash back and troubleshoot again. Oh well....
zagman said:
creating a zip with the Stock .apk and META-INF and flash it in Clockwork Recovery was unsuccessful.
"Installing Evo 3D base rom 1.0
unpacking system..
symlinks & pemissions...
"installing kernal...
assert failed: package_extract_file("boot.img. "/tmp/boot.img")
E: error in /sdcard/download/xxx.zip
(Status 7)
Installation aborted."
Although I backed up in CWM....think im just gonna restore back to last week. If i get a wild hair and some good tech support from Xron, I might flash back and troubleshoot again. Oh well....
Click to expand...
Click to collapse
Stop......Explain what you're trying to do and I will help you.
You want a stock framework-res file?
freeza said:
Stop......Explain what you're trying to do and I will help you.
You want a stock framework-res file?
Click to expand...
Click to collapse
I flashed a battery mod from Xron and the screen was black all for notification bar on top. Trying to "undo" that. Ive extracted the framework-res.apk and the Meta-Inf folder from the stock rom and tried flashing. Not recognizable in CWM Rec. I used the original signed .zip and replaced the contents and the results are in my last post. What else can be done?
zagman said:
I flashed a battery mod from Xron and the screen was black all for notification bar on top. Trying to "undo" that. Ive extracted the framework-res.apk and the Meta-Inf folder from the stock rom and tried flashing. Not recognizable in CWM Rec. I used the original signed .zip and replaced the contents and the results are in my last post. What else can be done?
Click to expand...
Click to collapse
That updater script is trying to install more than what you have in the zip. Your best bet would be to push through adb
Enter-
Adb push (your framework-res.apk) /system/app/
No parenthancies
Sent from my PG86100 using XDA Premium App
My buddy rooted my phone last year and flashed cyanogenmod 7.1.1. My bluetooth piece will not connect to my phone and I'm thinking I need to flash a new rom.
I have no idea how to do this. I tried to read up on stuff like adb and sdk.
I could really use some serious guidance on how to update my rom.
I'm running Android 2.3.7 with Cyanogenmod 7.1.1.
Can I install any type of mod, now? Like Sense?
I hope I am posting this in the proper place.
Thank you
This needs to be moved to q and a. Anyhow, you can now flash other roms. There is a guide posted somewhere im sure. Just google thunderbolt Rom flashing guide or something like that.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
This needs to be moved to q and a. Anyhow, you can now flash other roms. There is a guide posted somewhere im sure. Just google thunderbolt Rom flashing guide or something like that.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
How do I move this to Q and A?
And I can run any other type of ROM? Would I have to re-download rom manager and all that? I've been reading up on titanium backup. So I really just download the file to my SD card then delete data/dalvik then reboot to recovery and install new rom there? There redownload titanium and do a restore?
Kdeli said:
How do I move this to Q and A?
And I can run any other type of ROM? Would I have to re-download rom manager and all that? I've been reading up on titanium backup. So I really just download the file to my SD card then delete data/dalvik then reboot to recovery and install new rom there? There redownload titanium and do a restore?
Click to expand...
Click to collapse
http://rootzwiki.com/index.php?/topic/4405-[FAQ]v1.4-Thunderbolt-Noob-Starter-Guide/How-To/OC-guide-(updated-9/21)
Sent from my ThunderBolt using Tapatalk 2
0dBu said:
http://rootzwiki.com/index.php?/topic/4405-[FAQ]v1.4-Thunderbolt-Noob-Starter-Guide/How-To/OC-guide-(updated-9/21)
Sent from my ThunderBolt using Tapatalk 2
Click to expand...
Click to collapse
Thank you much. I will read, then re-read this, then ask any questions I may have.
Have a great Monday!
What I really need is the ability to use my blue tooth headsest. Do I have to flash a whole new ROM for this? Or should I flash a radio?
I've been reading up on flashing a new rom but am still confused. Do I need to flash the rom THEN flash an RUU (radio?). How about kernels?
I'm worried that I would have issues with the small things...like clearing/formatting my data/dalvik.
Also, how do I add my Radio/RUU to the "Root" of my SD card?
And can anyone clarify how to verify M5sum? I have a program downloaded for it, but don't know how to use it.
First off radios and ruus are two different things. The radio does need to be on the root of the sd card to be flashed. It doesn't really matter if you flash the radio before or after because that won't change between flashes. I find the best way to do it is just download the radio using the phone. Browse with a root file explorer like es file explorer to the download folder, rename the file to PG05IMG.zip, copy, paste it one folder back (that's the root directory). After you flash it in the bootloader browse to the file and rename it.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
First off radios and ruus are two different things. The radio does need to be on the root of the sd card to be flashed. It doesn't really matter if you flash the radio before or after because that won't change between flashes. I find the best way to do it is just download the radio using the phone. Browse with a root file explorer like es file explorer to the download folder, rename the file to PG05IMG.zip, copy, paste it one folder back (that's the root directory). After you flash it in the bootloader browse to the file and rename it.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Thank you for the reply. I'll download a root file explorer. How should I download a radio on my phone?
Do you think the radio is the issue with my bluetooth not working?
Thanks again.
I have a clean NAND(backup) for those of you with a borked flash or that failed to create your own. This NAND is the clean stock ODEX rom with supersu binaries and busybox, it also contains superuser app and quickboot! Market FC's just sideload the apk. Everything else is fine!
I am posting the link but I'm a free DropBox user and I dont want my DropBox to be suspended.
If someone would like to create a mirror that I can throw in the OP that would be appreciated by both me and your peers!
Happy flashing folks!
Clean NAND(TWRP)http://
Jonesin~
P.S. as of right ...empt to flash again till it takes. Good luck!
Do I need to move this to the twrp backup folder unzipped or zipped? Looking in the folder the other backup I had in there wasn't zipped...
Sent from my HTC6435LVW using Tapatalk 2
Danzoman316 said:
Do I need to move this to the twrp backup folder unzipped or zipped? Looking in the folder the other backup I had in there wasn't zipped...
Sent from my HTC6435LVW using Tapatalk 2
Click to expand...
Click to collapse
need to move to twrp then there will a folder inside the backups folder with a hex name, unzip and place it in there
Any chance of getting another link to this?
surflamj said:
Any chance of getting another link to this?
Click to expand...
Click to collapse
I asked him if he wanted me to mirror it, but have not yet received a response. Since I don't have the original file(s) and I don't want to do this without the OP's permission, I will wait for the response to my PM.
Ive seen other posts about this but what is it. I want to install google now on my stock ics ota. But other sites say i need a deodexed rom.
There is a file included in every apk on a stock rom that is an odex (I don't know what this does but I think it is a database or a cache). It makes modding or theming difficult so developers take it out.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
There is a file included in every apk on a stock rom that is an odex (I don't know what this does but I think it is a database or a cache). It makes modding or theming difficult so developers take it out.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
I am not sure how to flash a radio. i have to flash a radio before i flash a deodexed rom. How do i do this
Download the radio. Put it on the root of your SD (/sdcard). CHECK THE MD5 SUM BEFORE FLASHING. Rename the file exactly like this PG05IMG.zip. Reboot into the bootloader. Press the power button to select fastboot. Press volume up to apply the update. Once it finishes reboot. After the reboot make sure to rename the radio zip or move it somewhere else. I usually rename them. Also it is extremely important that the md5 matches. If it does not then do no flash the file as it will brick your device.
Sent from my personally built from source CM10.1 N7.
disconnecktie said:
Download the radio. Put it on the root of your SD (/sdcard). CHECK THE MD5 SUM BEFORE FLASHING. Rename the file exactly like this PG05IMG.zip. Reboot into the bootloader. Press the power button to select fastboot. Press volume up to apply the update. Once it finishes reboot. After the reboot make sure to rename the radio zip or move it somewhere else. I usually rename them. Also it is extremely important that the md5 matches. If it does not then do no flash the file as it will brick your device.
Sent from my personally built from source CM10.1 N7.
Click to expand...
Click to collapse
This is a great instruction. The only thing I might add is that the file name contains a zero, not a letter O. And reinforcing the point disconnecktie makes, it is important to rename or delete the zip file after you reboot... if you don't it may cause the phone to brick if you try to flash another radio.
One other note, you can also delete and download radios using a microSD card reader attached to your PC. A cheap bit of insurance to have around, just in case.
Sent from my cm_tenderloin using xda app-developers app
That is a 0.....
Sent from my ADR6400L using Tapatalk 2
Nomad1600 said:
This is a great instruction. The only thing I might add is that the file name contains a zero, not a letter O. And reinforcing the point disconnecktie makes, it is important to rename or delete the zip file after you reboot... if you don't it may cause the phone to brick if you try to flash another radio.
One other note, you can also delete and download radios using a microSD card reader attached to your PC. A cheap bit of insurance to have around, just in case.
Sent from my cm_tenderloin using xda app-developers app
Click to expand...
Click to collapse
Once i flash it, i reboot and let it boot to the os and then remove the PG05IMG?
Or after the flash, turn it off and then delete the PG05IMG and then reboot?
And btw, thanks for all your help.
Reboot and then delete the file.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
Reboot and then delete the file.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
Thanks
disconnecktie said:
Download the radio. Put it on the root of your SD (/sdcard). CHECK THE MD5 SUM BEFORE FLASHING. Rename the file exactly like this PG05IMG.zip. Reboot into the bootloader. Press the power button to select fastboot. Press volume up to apply the update. Once it finishes reboot. After the reboot make sure to rename the radio zip or move it somewhere else. I usually rename them. Also it is extremely important that the md5 matches. If it does not then do no flash the file as it will brick your device.
Sent from my personally built from source CM10.1 N7.
Click to expand...
Click to collapse
This was immensely helpful. Thank you!